Polar 78 ES

Year 1996
Chrome air table
Complete with tools and spare knife

Nebiolo Athena die Cutting

size 60×80

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Heidelberg GTP hot foil platen.

Serial GTP 63613
Complete with big hot foil chase

Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,

Wookil WTNS 1700 semi automatic die cutting machine

Year 2000
Max size 1200x 1700 mm
Min size: 600 x 850 mm
Max pressure 350 tons

Polar 92 EMC monitor

Chrome table with air
2 x 1m2 resopal side tables with air.

Polar 92 EMC monitor.

Snijbreedte: 92 cm
Chrome air table
Complete with tools and spare knife

Screenprinting machine 3/4 automat

Emm 3/4 automatic screenprinting machine Type 444 DVA.

With Trumax Hot, cold and UV drying unit.
and Trumax stacker

Viportech Executive

Vipromat executive semiautomatic ( 1189 x 841 mm)

2 x Hohner 48/5 S eyelet loop stitching heads

I'm good condition.
Price pro pice

Powered Feed Roller

Cutting Shear: 3 knife units
Creasing unit: 8 creasing units

GTS Countmaster 1053

With stoke inserter

230 volt
Max stack height: 140 mm
Max paper size: 350 x 600 mm
Min paper size: 45

Ascon
Model: 1000
Year 2002

Automatic rotating

Afmeting 72 x 115 cm
Capacity 1000 kg

Polar 155 EMC 1 with microcut system

Year 1980
Complete with spare knife
Cutting size 155 cm

Polar 145 EL

With Gergeck System six computer installed
Cutting width 145 cm

Complete with spare knife

Workingwidth 1500 mm

Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct

Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000

Automatic closing window

Hardened die plate

Platen press / Diecutter - clamp shell die cutter

Cauhe VA ( 1450 x 1850 mm )
Model VA
Year 2000

Automatic window

Pileturner

Ascon
Model 1000

Size 800 x 1100 mm
Capacity 1000 kg

Heidelberg KSBA cilinder

Max size: 46x 58.5 cm
Die cutting cilinder with inking unit

Heidelberg PM 52-2

Year 2006
Baldwin dampening
Rubberdoek wasinrichting
Semi automatic plate change
Impressions: ± 20mil

Paperplast international Dry 40

Format: 76x102

Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater

Polar 155 CE

Gergeck system six backgauge control
Pilz control unit
PIlz 2 hand control
Pilz photocell safety
Main motor: frequency driven.

Complete with spare knife

Theisen en Bonitz Sprint HP 320

20 stations High pile collating machine
Complete with pumps

Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm

Polar 76 em

Size: 76 cm
With knife change tools and spare knife

Morgana Digifold Pro

Folding creasing machine

Heidelberg Stahfolder T52-4

Year: 2003
Tremat feeder
Without pumps

Card board cutter Schimanek Model 10-110

Year: 1997s
Cutting size: 110 cm
Table cast Iron

Wohlenberg 92 MCS-TV

Cutting size: 92 cm

Complete with knife change tools
Spare knife
Main and side tables with air
Monitor and machine in good condition

Perfect Match
Aquaflex + Aqua

The Dantex Aqua is specifically intended for processing and drying water washable printing plates and has been designed to provide exceptional plate quality, combined with minimal maintenance. It is robustly constructed and provides reliable & consistent operation day after day.

AQUA 760 FEATURES FOR YOUR BENEFIT

Plate size (width x length) mm 762 x 635
Power 8kW (400V 3ph + N + E @12 amps)
Unit dimensions* (L x W x H) mm 4189 x 1500 x 1125
With extended drying 5226 x 1500 x 1125
With extended drying (short version) 4486 x 1500 x 1125
Max. plate thickness 1.7 mm

Processing time: 30 min. (900 mm x 1200 mm x 100 mm / min.)
Fresh water or tank system for washing out flexographic printing plates
Very easy handling and maintenance
Chain drive system
Adjustable surfactant dosage and water flow rate
Double wash head with programmable speed
User friendly interface
Extended drying option

Polar 76 EM Papercutter

Year: 1990
Cutting size: 76 cm

Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools

MBO B30E-1-76/4/4 Folding machine

PALLET FEEDER
COUNTER
SOUND HOOD
1ST UNIT 4 BUCKLES
2ND UNIT 4 BUCKLES
DELIVERY FA 82 ME ASP 66-2ME

Wohlenberg 92 MCS 2 - TV

Airtable: Yes

Schneider Senator 155 MC-2

Year: 1986
With side tabels and spare knife

Muller Laconda 620

– 9 stations collating
– Folding stitching unit: HF 33 c
– complete wit pump
– Year 1990

Heidelberg Sm 52 Platepunch
Year: 2000

Hohner 48-5 S Stitching head

Hohner 52-8 S stitching head

New in box
Complete with tools and clincher

Polar 78 E

Cutting width: 78 cm
Year: 1996

Complete with knife change tools, spare knife and manual

Perfecta/ Knorr ABS 106 -3 R Destacker right

With rear shield

Built in 1994

Maximum format: 75 x 104 cm
Maximum stack height in one go: 16.5 cm
Stack height of pile max: 106 cm

Wohlenberg 92 MCS 2 TV

Size: 92 cm
Air table

Polar LW 1000-4 paper stack lift

Year: 1998
Capacity : 1000 kg
Max pallet size: Pallet size 1200 × 800
Power supply: 380V

Automatic lifting cycle controlled by photocell or manual mode, fast work.

Pneumatic book press,

Size 40x40 cm

Heidelberg A4 Tiegel

Manfred rachner R1000 PA R+S

Year: 2002
Type: R1000 PA R+S
Functions: Turning + vibrating + blowing

Baumann BA 7 S unloader

Type: Loader / unloader Baumann BA 7-S
Baumann BA-7 S large format
Format : 1.250 x 1.650 mm

Hentong ZKT 700 Window patching machine

Paper length 150-600 mm
Paper width: 200-690 mm
Film length 60-330 mm
Film width 30-380 mm

Machine dimensions: 4200 x 1400 x 1500 mm

Mueller Martini Concept

Year: 1996
Unwind 50 Inch
Printing Units 4 x 24 inch
and 4 x 25 inc

Unigraphica stacker
and a sheeter 2088 for DinA4 or possible to lengthen A3 or A2

There is also a unit available where placemats were printed in the past.

Horizon APC T 61
Complete with tools and spare knife