4
Folders and inserters
1
Post press machinesAccessories and spare parts
-1_thumb.jpeg "Show advert")
-2_thumb.jpeg "Show advert")
-3_thumb.jpeg "Show advert")
-4_thumb.jpeg "Show advert")
-5_thumb.jpeg "Show advert")
-6_thumb.jpeg "Show advert")
-7_thumb.jpeg "Show advert")
-9_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
10
Cutting machines
Polar 92 XT
Year: 2007
Touch screen control
Normal and small clamping plate
Knife change tools
Spare knives
Big right side table
P-net Netwerk integration P-N V1.1.2
Polar 92 XT
Year: 2007
Touch screen control
Normal and small clamping plate
Knife change tools
Spare knives
Big right side table
P-net Netwerk integration P-N V1.1.2
Year: 2007
Touch screen control
Normal and small clamping plate
Knife change tools
Spare knives
Big right side table
P-net Netwerk integration P-N V1.1.2
3
Horizon APC-T61 Paper Cutter
Key Features:
Model: Horizon APC-T61
Maximum Cutting Width: 61 cm
Safety: Equipped with photocell safety beam guards
Operation: User-friendly control panel for precise operation
Condition: Fully cleaned, serviced, and tested
Design: Compact and durable construction for long-lasting performance
Additional Details:
Ideal for small to medium-sized print shops and finishing operations
Highly reliable and accurate for cutting paper, card, and similar materials
Ready for immediate use
Horizon APC-T61 Paper Cutter
Key Features:
Model: Horizon APC-T61
Maximum Cutting Width: 61 cm
Safety: Equipped with photocell safety beam guards
Operation: User-friendly control panel for precise operation
Condition: Fully cleaned, serviced, and tested
Design: Compact and durable construction for long-lasting performance
Additional Details:
Ideal for small to medium-sized print shops and finishing operations
Highly reliable and accurate for cutting paper, card, and similar materials
Ready for immediate use
Key Features:
Model: Horizon APC-T61
Maximum Cutting Width: 61 cm
Safety: Equipped with photocell safety beam guards
Operation: User-friendly control panel for precise operation
Condition: Fully cleaned, serviced, and tested
Design: Compact and durable construction for long-lasting performance
Additional Details:
Ideal for small to medium-sized print shops and finishing operations
Highly reliable and accurate for cutting paper, card, and similar materials
Ready for immediate use
-1_thumb.jpeg "Show advert")
-2_thumb.jpeg "Show advert")
-3_thumb.jpeg "Show advert")
-4_thumb.jpeg "Show advert")
4
Cutting machines
Polar Mohr 66 Programmable Guillotine (2001)
Key Features:
Model: POLAR 66
Year: 2001
Maximum Cutting Width: 66 cm
Ownership: Single-owner machine since new
Condition: Fully cleaned, checked, serviced, and tested
Programs: Digital programmable control for precision cutting
Safety: Equipped with safety beam guards for operator protection
Accessories:
Two steel side tables
One spare blade
Polar Mohr 66 Programmable Guillotine (2001)
Key Features:
Model: POLAR 66
Year: 2001
Maximum Cutting Width: 66 cm
Ownership: Single-owner machine since new
Condition: Fully cleaned, checked, serviced, and tested
Programs: Digital programmable control for precision cutting
Safety: Equipped with safety beam guards for operator protection
Accessories:
Two steel side tables
One spare blade
Key Features:
Model: POLAR 66
Year: 2001
Maximum Cutting Width: 66 cm
Ownership: Single-owner machine since new
Condition: Fully cleaned, checked, serviced, and tested
Programs: Digital programmable control for precision cutting
Safety: Equipped with safety beam guards for operator protection
Accessories:
Two steel side tables
One spare blade
_thumb.jpeg "Show advert")
-2_thumb.jpeg "Show advert")
-3_thumb.jpeg "Show advert")
-4_thumb.jpeg "Show advert")
-5_thumb.jpeg "Show advert")
-6_thumb.jpeg "Show advert")
-7_thumb.jpeg "Show advert")
-8_thumb.jpeg "Show advert")
9
Cutting machines
Polar 115 E
Year: 2001
Chrome table with air
side tables: 2x 1m2 resopal with air
Knife change tools
spare knife
Polar 115 E
Year: 2001
Chrome table with air
side tables: 2x 1m2 resopal with air
Knife change tools
spare knife
Year: 2001
Chrome table with air
side tables: 2x 1m2 resopal with air
Knife change tools
spare knife
6
Cutting machines
Polar 155 ED Guillotine
Year: 1997
fast knife changing
Chrome bed with sir
Photocell safety
Polar 155 ED Guillotine
Year: 1997
fast knife changing
Chrome bed with sir
Photocell safety
Year: 1997
fast knife changing
Chrome bed with sir
Photocell safety
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
8
Label printing and die-cutting machine
Cauhe II
Year 2004
Format: 82x112 cm
Weight 4400 kg
Heated Plate
Cauhe II
Year 2004
Format: 82x112 cm
Weight 4400 kg
Heated Plate
Year 2004
Format: 82x112 cm
Weight 4400 kg
Heated Plate
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
-6_thumb.jpg "Show advert")
-8_thumb.jpg "Show advert")
-9_thumb.jpg "Show advert")
8
Label printing and die-cutting machine
Simplacutter VI
Max dimensions: 200x 120 cm
Simplacutter VI
Max dimensions: 200x 120 cm
Max dimensions: 200x 120 cm
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
-6_thumb.jpg "Show advert")
-7_thumb.jpg "Show advert")
8
Cutting machines
Polar Mohr 78 ED paper guillotine
Technical data:
Cutting width 780mm
Stack height 120mm
Color LCD display
Power supply 400V
Weight 1400 kg
Side tables
Chrome table surface
Spare knife, cutting sticks, tapping block, maintenance tools.
Polar Mohr 78 ED paper guillotine
Technical data:
Cutting width 780mm
Stack height 120mm
Color LCD display
Power supply 400V
Weight 1400 kg
Side tables
Chrome table surface
Spare knife, cutting sticks, tapping block, maintenance tools.
Technical data:
Cutting width 780mm
Stack height 120mm
Color LCD display
Power supply 400V
Weight 1400 kg
Side tables
Chrome table surface
Spare knife, cutting sticks, tapping block, maintenance tools.
 Grey cilinder-1_thumb.jpg "Show advert")
 Grey cilinder-3_thumb.jpg "Show advert")
 Grey cilinder-4_thumb.jpg "Show advert")
 Grey cilinder-5_thumb.jpg "Show advert")
 Grey cilinder-6_thumb.jpg "Show advert")
 Grey cilinder-7_thumb.jpg "Show advert")
 Grey cilinder-8_thumb.jpg "Show advert")
 Grey cilinder-9_thumb.jpg "Show advert")
 Grey cilinder-91_thumb.jpg "Show advert")
10
Post press machinesDie cutter
Heidelberg SBB ( 56×82 cm) Gray cylinder
Very nice Heidelberg SBB cylinder
Fitted with safety covers with switches.
Electronics renewed.
Complete with 2 punch frames
Heidelberg SBB ( 56×82 cm) Gray cylinder
Very nice Heidelberg SBB cylinder
Fitted with safety covers with switches.
Electronics renewed.
Complete with 2 punch frames
_thumb.jpg "Show advert")
6
Hans Wahli stream feeder
complete with delivery belt
Hans Wahli stream feeder
complete with delivery belt
complete with delivery belt
5
Cutting machines
Polar RAB 4 Jogger
Year: 1998
With automatic side flaps and air removing roller
Polar RAB 4 Jogger
Year: 1998
With automatic side flaps and air removing roller
Year: 1998
With automatic side flaps and air removing roller
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
10
Post press machinesLaminating machines
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
6
Accessories and spare parts
2 x Hohner 48/5 S eyelet loop stitching heads
I'm good condition.
Price pro pice
2 x Hohner 48/5 S eyelet loop stitching heads
I'm good condition.
Price pro pice
I'm good condition.
Price pro pice
-1_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
6
Cutting machines
Polar 76 EM Papercutter
Year: 1990
Cutting size: 76 cm
Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools
Polar 76 EM Papercutter
Year: 1990
Cutting size: 76 cm
Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools
Year: 1990
Cutting size: 76 cm
Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
6
Folding machines
MBO B30E-1-76/4/4 Folding machine
PALLET FEEDER
COUNTER
SOUND HOOD
1ST UNIT 4 BUCKLES
2ND UNIT 4 BUCKLES
DELIVERY FA 82 ME ASP 66-2ME
MBO B30E-1-76/4/4 Folding machine
PALLET FEEDER
COUNTER
SOUND HOOD
1ST UNIT 4 BUCKLES
2ND UNIT 4 BUCKLES
DELIVERY FA 82 ME ASP 66-2ME
PALLET FEEDER
COUNTER
SOUND HOOD
1ST UNIT 4 BUCKLES
2ND UNIT 4 BUCKLES
DELIVERY FA 82 ME ASP 66-2ME
3
Pre-pressAccessories and spare parts
Heidelberg Sm 52 Platepunch
Year: 2000
Heidelberg Sm 52 Platepunch
Year: 2000
Year: 2000
-1_thumb.jpg "Show advert")
 -3_thumb.jpg "Show advert")
 -4_thumb.jpg "Show advert")
 -5_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
5
Cutting machines
Polar 78 E
Cutting width: 78 cm
Year: 1996
Complete with knife change tools, spare knife and manual
Polar 78 E
Cutting width: 78 cm
Year: 1996
Complete with knife change tools, spare knife and manual
Cutting width: 78 cm
Year: 1996
Complete with knife change tools, spare knife and manual
-1._thumb.jpg "Show advert")
-1_thumb.jpg "Show advert")
-2._thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3._thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4._thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5._thumb.jpg "Show advert")
-6._thumb.jpg "Show advert")
-7._thumb.jpg "Show advert")
-8._thumb.jpg "Show advert")
13
Cutting machines
Perfecta/ Knorr ABS 106 -3 R Destacker right
With rear shield
Built in 1994
Maximum format: 75 x 104 cm
Maximum stack height in one go: 16.5 cm
Stack height of pile max: 106 cm
Perfecta/ Knorr ABS 106 -3 R Destacker right
With rear shield
Built in 1994
Maximum format: 75 x 104 cm
Maximum stack height in one go: 16.5 cm
Stack height of pile max: 106 cm
With rear shield
Built in 1994
Maximum format: 75 x 104 cm
Maximum stack height in one go: 16.5 cm
Stack height of pile max: 106 cm
4
Cutting machines
Horizon APC T 61
Complete with tools and spare knife
Horizon APC T 61
Complete with tools and spare knife
Complete with tools and spare knife
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
2
Cutting machines
Polar 78 E
Year 1996
Chrome table with air
Complete with tools and spare knife
In good working condition
Polar 78 E
Year 1996
Chrome table with air
Complete with tools and spare knife
In good working condition
Year 1996
Chrome table with air
Complete with tools and spare knife
In good working condition
-1_thumb.jpg "Show advert")
7
Cutting machines
Polar RAB 4 jogger
Year 1998
Automatic flap left and right
Max paper format: up to 75 x 105 cm
Air pressing roller
Polar RAB 4 jogger
Year 1998
Automatic flap left and right
Max paper format: up to 75 x 105 cm
Air pressing roller
Year 1998
Automatic flap left and right
Max paper format: up to 75 x 105 cm
Air pressing roller
7
IRAM 16 PAPER DRILL (4 heads)
YEAR 1996 (serial no 3131)
FOUR HEAD PAPER DRILL
FITTED WITH SAFETY GUARDS
THREE PHASE 380 volt POWER SUPPLY
IRAM 16 PAPER DRILL (4 heads)
YEAR 1996 (serial no 3131)
FOUR HEAD PAPER DRILL
FITTED WITH SAFETY GUARDS
THREE PHASE 380 volt POWER SUPPLY
YEAR 1996 (serial no 3131)
FOUR HEAD PAPER DRILL
FITTED WITH SAFETY GUARDS
THREE PHASE 380 volt POWER SUPPLY
-1._thumb.jpg "Show advert")
-2._thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3._thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4._thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5._thumb.jpg "Show advert")
-7._thumb.jpg "Show advert")
-8._thumb.jpg "Show advert")
11
Cutting machines
Perfecta/ Knorr ABS 106 -3 R Destacker right
With rear shield
Built in 1994
– Maximum format 75 x 104 cm
– Maximum stack height in one go: 16.5 cm
– Stack height max: 106 cm
Perfecta/ Knorr ABS 106 -3 R Destacker right
With rear shield
Built in 1994
– Maximum format 75 x 104 cm
– Maximum stack height in one go: 16.5 cm
– Stack height max: 106 cm
With rear shield
Built in 1994
– Maximum format 75 x 104 cm
– Maximum stack height in one go: 16.5 cm
– Stack height max: 106 cm
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
5
Cutting machines
Schneider Senator 78 E line
Press bar broken/ needs to be repaired
Schneider Senator 78 E line
Press bar broken/ needs to be repaired
Press bar broken/ needs to be repaired
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
-6_thumb.jpg "Show advert")
-7_thumb.jpg "Show advert")
8
Cutting machines
Poar D 66 ECO papercutter
Complete with tools and books
in good wokring condition
Year: 2020
Poar D 66 ECO papercutter
Complete with tools and books
in good wokring condition
Year: 2020
Complete with tools and books
in good wokring condition
Year: 2020