3
Food machinesMeat processing
Protech three station sinks, Stainless, wall mounted sinks, knee operated, three available
Protech three station sinks, Stainless, wall mounted sinks, knee operated, three available
7
Food machinesMeat processing
NNP Stainless racking, Stainless racking, various sizes
NNP Stainless racking, Stainless racking, various sizes
4
Food machinesMeat processing
NNP Stainless boot rack, Stainless boot rack station, 24 pairs per rack, two racks available, mobile
NNP Stainless boot rack, Stainless boot rack station, 24 pairs per rack, two racks available, mobile
13
Plastic processing machinesPeripheral equipment
Ref. no.: 18439
Hersteller: MOTAN
Year of construction: 1995
Further information:
These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.
Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.
Ref. no.: 18439
Hersteller: MOTAN
Year of construction: 1995
Further information:
These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.
Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.
Hersteller: MOTAN
Year of construction: 1995
Further information:
These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.
Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.
13
Plastic processing machinesInjection molding machines
Ref. no.: 17540
Hersteller: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Ref. no.: 17540
Hersteller: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Hersteller: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
6
Metal working and machine toolsWelding machinesOther
Arbeitslänge: 8000 mmArbeitsbreite: 3500 mmLeistung: 300 APlasmaquelle: NertajetType: HP 300 CNCBrennerköpfe: 1
Arbeitslänge: 8000 mm
Arbeitsbreite: 3500 mm
Leistung: 300 A
Plasmaquelle: Nertajet
Type: HP 300 CNC
Brennerköpfe: 1
Arbeitsbreite: 3500 mm
Leistung: 300 A
Plasmaquelle: Nertajet
Type: HP 300 CNC
Brennerköpfe: 1
4
Ausladung: 6000 mmTragkraft in kg: kgSchwenkbereich: GradHöhe: 3800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 6000 mm
Tragkraft in kg: kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tragkraft in kg: kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Ausladung: 5500 mmTragkraft in kg: 250 kgSchwenkbereich: GradHöhe: 3800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 5500 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Ausladung: 5500 mmTragkraft in kg: 250 kgSchwenkbereich: GradHöhe: 3800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 5500 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Ausladung: 5500 mmTragkraft in kg: 250 kgSchwenkbereich: GradHöhe: 3800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 5500 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Ausladung: 5000 mmTragkraft in kg: 500 kgSchwenkbereich: GradHöhe: 3800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 5000 mm
Tragkraft in kg: 500 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tragkraft in kg: 500 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Ausladung: 5000 mmTragkraft in kg: 250 kgSchwenkbereich: GradHöhe: 3800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 5000 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
6
Ausladung: 4000 mmTragkraft in kg: 250 kgSchwenkbereich: GradHöhe: 3800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 4000 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
6
Ausladung: 3000 mmTragkraft in kg: 250 kgSchwenkbereich: GradHöhe: 3800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 3000 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsMilling machinesTravelling column milling machines
x-Weg: 6500 mmy-Weg: 1400 mmz-Weg: 1000 mmDrehzahl: 20-4000 U/minSpindelaufnahme ISO: SK50Tischabmessung: 8000x1100 mmSteuerung: Siemens 840 DEilgang: 20000 mm/minFräskopf - schwenkbar + / -: 360 +/- °T-Nuten - Breite: 22 mmTischbelastung: 2500 kg/m²Spindelleistung: 28 KwVorschub: 10.000 mm/minAnschlußleistung: 76 kVAMaschinengewicht ca.: 28,5 t
x-Weg: 6500 mm
y-Weg: 1400 mm
z-Weg: 1000 mm
Drehzahl: 20-4000 U/min
Spindelaufnahme ISO: SK50
Tischabmessung: 8000x1100 mm
Steuerung: Siemens 840 D
Eilgang: 20000 mm/min
Fräskopf - schwenkbar + / -: 360 +/- °
T-Nuten - Breite: 22 mm
Tischbelastung: 2500 kg/m²
Spindelleistung: 28 Kw
Vorschub: 10.000 mm/min
Anschlußleistung: 76 kVA
Maschinengewicht ca.: 28,5 t
y-Weg: 1400 mm
z-Weg: 1000 mm
Drehzahl: 20-4000 U/min
Spindelaufnahme ISO: SK50
Tischabmessung: 8000x1100 mm
Steuerung: Siemens 840 D
Eilgang: 20000 mm/min
Fräskopf - schwenkbar + / -: 360 +/- °
T-Nuten - Breite: 22 mm
Tischbelastung: 2500 kg/m²
Spindelleistung: 28 Kw
Vorschub: 10.000 mm/min
Anschlußleistung: 76 kVA
Maschinengewicht ca.: 28,5 t
10
Metal working and machine toolsLathesLathes
Drehdurchmesser über Bett: 1400 mmDrehdurchmesser über Support: 1400 mmDrehlänge: 6000 mmWerkstückgewicht: 30 tDrehzahl: 100 U/minGesamtleistungsbedarf: 75 kWMaschinengewicht ca.: 70 tRaumbedarf ca.: m
Drehdurchmesser über Bett: 1400 mm
Drehdurchmesser über Support: 1400 mm
Drehlänge: 6000 mm
Werkstückgewicht: 30 t
Drehzahl: 100 U/min
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 70 t
Raumbedarf ca.: m
Drehdurchmesser über Support: 1400 mm
Drehlänge: 6000 mm
Werkstückgewicht: 30 t
Drehzahl: 100 U/min
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 70 t
Raumbedarf ca.: m
9
Metal working and machine toolsLathesLathes
Drehdurchmesser über Bett: 1400 mmDrehdurchmesser über Support: 1400 mmDrehlänge: 5000 mmWerkstückgewicht: 25 tDrehzahl: 0,6-300 U/minVierbackenfutter Durchmesser: 800 mmSteuerung: SiemensGetriebestufen: 3Gesamtleistungsbedarf: 100 kWMaschinengewicht ca.: 70 tRaumbedarf ca.: m
Drehdurchmesser über Bett: 1400 mm
Drehdurchmesser über Support: 1400 mm
Drehlänge: 5000 mm
Werkstückgewicht: 25 t
Drehzahl: 0,6-300 U/min
Vierbackenfutter Durchmesser: 800 mm
Steuerung: Siemens
Getriebestufen: 3
Gesamtleistungsbedarf: 100 kW
Maschinengewicht ca.: 70 t
Raumbedarf ca.: m
Drehdurchmesser über Support: 1400 mm
Drehlänge: 5000 mm
Werkstückgewicht: 25 t
Drehzahl: 0,6-300 U/min
Vierbackenfutter Durchmesser: 800 mm
Steuerung: Siemens
Getriebestufen: 3
Gesamtleistungsbedarf: 100 kW
Maschinengewicht ca.: 70 t
Raumbedarf ca.: m
12
Metal working and machine toolsLathesLathes
Planscheibendurchmesser: 4770 mmUmlaufdurchmesser: 10000 mmDrehhöhe: 3500 mmTischbelastung: 100 tDrehzahl: 40 U/minTischantrieb: 125 kWSteuerung: SiemensTyp: 840 DSupport: 1Supportverstellung: 1421 mmStößelabmessungen: 250x250 mmNeigung: +/-30 °angetriebe Werkzeuge: 16 KwSpindelaufnahme ISO: 50Spindeldrehzahlen: 3000 U/minGesamtleistungsbedarf: 150 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Planscheibendurchmesser: 4770 mm
Umlaufdurchmesser: 10000 mm
Drehhöhe: 3500 mm
Tischbelastung: 100 t
Drehzahl: 40 U/min
Tischantrieb: 125 kW
Steuerung: Siemens
Typ: 840 D
Support: 1
Supportverstellung: 1421 mm
Stößelabmessungen: 250x250 mm
Neigung: +/-30 °
angetriebe Werkzeuge: 16 Kw
Spindelaufnahme ISO: 50
Spindeldrehzahlen: 3000 U/min
Gesamtleistungsbedarf: 150 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Umlaufdurchmesser: 10000 mm
Drehhöhe: 3500 mm
Tischbelastung: 100 t
Drehzahl: 40 U/min
Tischantrieb: 125 kW
Steuerung: Siemens
Typ: 840 D
Support: 1
Supportverstellung: 1421 mm
Stößelabmessungen: 250x250 mm
Neigung: +/-30 °
angetriebe Werkzeuge: 16 Kw
Spindelaufnahme ISO: 50
Spindeldrehzahlen: 3000 U/min
Gesamtleistungsbedarf: 150 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
12
Metal working and machine toolsLathesLathes
Planscheibendurchmesser: 4000 mmUmlaufdurchmesser: 4300 mmDrehhöhe: 1750 mmSupportverstellung: 1000 mmTischbelastung: 18 tDrehzahl: 43,7 U/minSteuerung: SiemensTyp: 840 D mmSupport: 2Stößelabmessungen: 250x250 mmangetriebe Werkzeuge: 36 kwGesamtleistungsbedarf: 85 KVAMaschinengewicht ca.: 64 tRaumbedarf ca.: 8x5,8x8 m
Planscheibendurchmesser: 4000 mm
Umlaufdurchmesser: 4300 mm
Drehhöhe: 1750 mm
Supportverstellung: 1000 mm
Tischbelastung: 18 t
Drehzahl: 43,7 U/min
Steuerung: Siemens
Typ: 840 D mm
Support: 2
Stößelabmessungen: 250x250 mm
angetriebe Werkzeuge: 36 kw
Gesamtleistungsbedarf: 85 KVA
Maschinengewicht ca.: 64 t
Raumbedarf ca.: 8x5,8x8 m
Umlaufdurchmesser: 4300 mm
Drehhöhe: 1750 mm
Supportverstellung: 1000 mm
Tischbelastung: 18 t
Drehzahl: 43,7 U/min
Steuerung: Siemens
Typ: 840 D mm
Support: 2
Stößelabmessungen: 250x250 mm
angetriebe Werkzeuge: 36 kw
Gesamtleistungsbedarf: 85 KVA
Maschinengewicht ca.: 64 t
Raumbedarf ca.: 8x5,8x8 m
11
Metal working and machine toolsLathesLathes
Planscheibendurchmesser: 2500 mmUmlaufdurchmesser: 2800 mmDrehhöhe: 2200 mmTischbelastung: 15 tDrehzahl: U/minVorschub: mm/USupport: 2Gesamtleistungsbedarf: 55 kWMaschinengewicht ca.: 56 tRaumbedarf ca.: m
Planscheibendurchmesser: 2500 mm
Umlaufdurchmesser: 2800 mm
Drehhöhe: 2200 mm
Tischbelastung: 15 t
Drehzahl: U/min
Vorschub: mm/U
Support: 2
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: 56 t
Raumbedarf ca.: m
Umlaufdurchmesser: 2800 mm
Drehhöhe: 2200 mm
Tischbelastung: 15 t
Drehzahl: U/min
Vorschub: mm/U
Support: 2
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: 56 t
Raumbedarf ca.: m
9
Food machinesBakery-, pastry equipmentMixers
Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintenance, 13Kw motors, high shear overhauled 2017, level detection, 50mm discharge pipe, 3Ph
Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintenance, 13Kw motors, high shear overhauled 2017, level detection, 50mm discharge pipe, 3Ph
7
Food machinesPackaging machinery
Translyft Rotary table scissor lift, Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph
Translyft Rotary table scissor lift, Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph
5
Food machinesBakery-, pastry equipmentMixers
Silverson GX High shear mixer, Stainless, high shear mixer, shaft length 1300mm, head diameter 150mm, 7.5Kw, 3Ph
Silverson GX High shear mixer, Stainless, high shear mixer, shaft length 1300mm, head diameter 150mm, 7.5Kw, 3Ph
7
Food machinesAccessories and spare parts
Easiweigh Ace 2V Linear weigher, Serial: 991278, Stainless, single head linear weigher, with foot pedal, 1Ph
Easiweigh Ace 2V Linear weigher, Serial: 991278, Stainless, single head linear weigher, with foot pedal, 1Ph
8
Food machinesOther
Loma IQ Twin head metal detector, Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject
Loma IQ Twin head metal detector, Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject
9
Food machinesCooling technologyRefrigerators
Onda FLV801A4AM Liquid cooler Serial: P1618341-01, 2016, Liquid cooler, Max working pressure 10bar, Min - Max working temp -30'C to +70'C, 3Ph
Onda FLV801A4AM Liquid cooler Serial: P1618341-01, 2016, Liquid cooler, Max working pressure 10bar, Min - Max working temp -30'C to +70'C, 3Ph
4
Food machinesPackaging machinery
Allpax PT-V-45 Vacuum sealer, stainless, tabletop vac sealer, 450mm sealing bar, 1Ph
Allpax PT-V-45 Vacuum sealer, stainless, tabletop vac sealer, 450mm sealing bar, 1Ph
6
Food machinesPackaging machinery
Allpax P355 Vacuum sealer, stainless, mounted on frame, tabletop vac sealer, 300mm sealing bar, adjustable seal time, 1Ph
Allpax P355 Vacuum sealer, stainless, mounted on frame, tabletop vac sealer, 300mm sealing bar, adjustable seal time, 1Ph
4
Food machinesPackaging machinery
Thimonnier PC30 BI-active heat sealing tong, Welds all types of laminate materials, sealing bar 300mm, sealing width 12mm, adjustable temp control, 1Ph
Thimonnier PC30 BI-active heat sealing tong, Welds all types of laminate materials, sealing bar 300mm, sealing width 12mm, adjustable temp control, 1Ph
6
Food machinesPackaging machinery
Allpax P355 Vacuum sealer, stainless, two in stock, tabletop vac sealer, 300mm sealing bar, adjustable seal time, 1Ph
Allpax P355 Vacuum sealer, stainless, two in stock, tabletop vac sealer, 300mm sealing bar, adjustable seal time, 1Ph
5
Food machinesMeat processing
Alfa Laval TS6MFG Plate heat exchanger, Serial: 30107, 2011, see plate for full spec
Alfa Laval TS6MFG Plate heat exchanger, Serial: 30107, 2011, see plate for full spec
6
Food machinesMeat processing
Sondex S22FG10 Plate heat exchanger, Serial: DIR67234, 2015, stainless plate heat exchanger, normal capacity 600Kw, Max temp 100'C see plate for all spec
Sondex S22FG10 Plate heat exchanger, Serial: DIR67234, 2015, stainless plate heat exchanger, normal capacity 600Kw, Max temp 100'C see plate for all spec
4
Food machinesBeverage productionPumps
Ebara EVMS3 Vertical multistage pump, 2023, Stainless pump, 1.5Kw, Max Liquid 120'C, 1Ph
Ebara EVMS3 Vertical multistage pump, 2023, Stainless pump, 1.5Kw, Max Liquid 120'C, 1Ph
8
Food machinesMeat processing
Hydrovane HV04 air compressor, Serial: 504020750, 2019, 4Kw, Max Bar 11, RPM 1455, 3Ph, comes with receiver and BEKO drypoint RA dryer,
Hydrovane HV04 air compressor, Serial: 504020750, 2019, 4Kw, Max Bar 11, RPM 1455, 3Ph, comes with receiver and BEKO drypoint RA dryer,
5
Food machinesAccessories and spare parts
Jungheinrich EJCM10 Electric pallet truck, Serial: F5004035, 2022, electric pallet truck, max lift height 1540mm, length of forks 1150mm, mobile, 1Ph to charge
Jungheinrich EJCM10 Electric pallet truck, Serial: F5004035, 2022, electric pallet truck, max lift height 1540mm, length of forks 1150mm, mobile, 1Ph to charge
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
8
Packaging machineryPacking machines
Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
13
Plastic processing machinesInjection molding machines
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 400 to
Stroke: 500 mm
Table: 5.000 x 3.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 3050 mm
Horizontal movable cylinder: 2.2 mm
Hydraulicaly movable stand: 3.6 mm
Length: 4500 mm
Width: 5000 mm
Height: 2600 mm
Weight: 24000 kg
pressing capacity: 400 to
Stroke: 500 mm
Table: 5.000 x 3.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 3050 mm
Horizontal movable cylinder: 2.2 mm
Hydraulicaly movable stand: 3.6 mm
Length: 4500 mm
Width: 5000 mm
Height: 2600 mm
Weight: 24000 kg
Stroke: 500 mm
Table: 5.000 x 3.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 3050 mm
Horizontal movable cylinder: 2.2 mm
Hydraulicaly movable stand: 3.6 mm
Length: 4500 mm
Width: 5000 mm
Height: 2600 mm
Weight: 24000 kg
1
Metal working and machine toolsSheet metal working machinesCircular shears
Max. thickness - mild steel: 2 mm
Throat depth: 700 mm
Motor: 1 kW
Speed: 7 m/min
min / max diameter: 120 / 1.000 mm
gap on blade side: 280 mm
Length: 1400 mm
Width: 400 mm
Height: 1150 mm
Weight: 360 kg
Max. thickness - mild steel: 2 mm
Throat depth: 700 mm
Motor: 1 kW
Speed: 7 m/min
min / max diameter: 120 / 1.000 mm
gap on blade side: 280 mm
Length: 1400 mm
Width: 400 mm
Height: 1150 mm
Weight: 360 kg
Throat depth: 700 mm
Motor: 1 kW
Speed: 7 m/min
min / max diameter: 120 / 1.000 mm
gap on blade side: 280 mm
Length: 1400 mm
Width: 400 mm
Height: 1150 mm
Weight: 360 kg
10
Metal working and machine toolsMilling machinesUniversal milling machines
x-Weg: 1150 mmy-Weg: 350 mmz-Weg: 500 mmTischfläche: 1500x380 mmDrehzahl: 42-1400 U/minSpindelaufnahme ISO: 50Bohrhub: 110 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 2,6 tRaumbedarf ca.: m
x-Weg: 1150 mm
y-Weg: 350 mm
z-Weg: 500 mm
Tischfläche: 1500x380 mm
Drehzahl: 42-1400 U/min
Spindelaufnahme ISO: 50
Bohrhub: 110 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 2,6 t
Raumbedarf ca.: m
y-Weg: 350 mm
z-Weg: 500 mm
Tischfläche: 1500x380 mm
Drehzahl: 42-1400 U/min
Spindelaufnahme ISO: 50
Bohrhub: 110 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 2,6 t
Raumbedarf ca.: m
5
Metal working and machine toolsLathesLathes
Drehdurchmesser: 1020 mmDrehlänge: 4000 mmDrehdurchmesser über Support: 720 mmSteuerung: SiemensTyp: 805Reitstock-Pinolenaufnahme MK: 6Getriebestufen: 2Drehzahl: U/minBettbreite: 560 mmSpindelbohrung: 200 mmWerkstückgewicht: kgPlanscheibe: 1000 mmFabrikat: Forkhardt PSA 1000Dreibackenfutter Forckrath: 500 mmLünette: 500 mmGesamtleistungsbedarf: KVAMaschinengewicht ca.: tRaumbedarf ca.: 7,4x2,5x2,5 m
Drehdurchmesser: 1020 mm
Drehlänge: 4000 mm
Drehdurchmesser über Support: 720 mm
Steuerung: Siemens
Typ: 805
Reitstock-Pinolenaufnahme MK: 6
Getriebestufen: 2
Drehzahl: U/min
Bettbreite: 560 mm
Spindelbohrung: 200 mm
Werkstückgewicht: kg
Planscheibe: 1000 mm
Fabrikat: Forkhardt PSA 1000
Dreibackenfutter Forckrath: 500 mm
Lünette: 500 mm
Gesamtleistungsbedarf: KVA
Maschinengewicht ca.: t
Raumbedarf ca.: 7,4x2,5x2,5 m
Drehlänge: 4000 mm
Drehdurchmesser über Support: 720 mm
Steuerung: Siemens
Typ: 805
Reitstock-Pinolenaufnahme MK: 6
Getriebestufen: 2
Drehzahl: U/min
Bettbreite: 560 mm
Spindelbohrung: 200 mm
Werkstückgewicht: kg
Planscheibe: 1000 mm
Fabrikat: Forkhardt PSA 1000
Dreibackenfutter Forckrath: 500 mm
Lünette: 500 mm
Gesamtleistungsbedarf: KVA
Maschinengewicht ca.: t
Raumbedarf ca.: 7,4x2,5x2,5 m
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
pressing capacity: 150 to
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 17.5 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1850 mm
Width: 1400 mm
Height: 2650 mm
Weight: 5400 kg
pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 17.5 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1850 mm
Width: 1400 mm
Height: 2650 mm
Weight: 5400 kg
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 17.5 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1850 mm
Width: 1400 mm
Height: 2650 mm
Weight: 5400 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 60 to
Stroke: 250 mm
Ram: 500x430 mm
Table: 750x500 mm
Daylight: 450 mm
Rapid speed: 26 mm/s
Working speed: 85 mm/s
Retraction speed: 47 mm/s
Motor: 7.5 kW
Length: 1820 mm
Width: 960 mm
Height: 2400 mm
Weight: 4000 kg
pressing capacity: 60 to
Stroke: 250 mm
Ram: 500x430 mm
Table: 750x500 mm
Daylight: 450 mm
Rapid speed: 26 mm/s
Working speed: 85 mm/s
Retraction speed: 47 mm/s
Motor: 7.5 kW
Length: 1820 mm
Width: 960 mm
Height: 2400 mm
Weight: 4000 kg
Stroke: 250 mm
Ram: 500x430 mm
Table: 750x500 mm
Daylight: 450 mm
Rapid speed: 26 mm/s
Working speed: 85 mm/s
Retraction speed: 47 mm/s
Motor: 7.5 kW
Length: 1820 mm
Width: 960 mm
Height: 2400 mm
Weight: 4000 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 30 to
Stroke: 200 mm
Ram: 500x380 mm
Table: 700x450 mm
Daylight: 400 mm
Rapid speed: 54 mm/s
Working speed: 18 mm/s
Retraction speed: 90 mm/s
Motor: 7.5 kW
Length: 1680 mm
Width: 850 mm
Height: 250 mm
Weight: 2950 kg
pressing capacity: 30 to
Stroke: 200 mm
Ram: 500x380 mm
Table: 700x450 mm
Daylight: 400 mm
Rapid speed: 54 mm/s
Working speed: 18 mm/s
Retraction speed: 90 mm/s
Motor: 7.5 kW
Length: 1680 mm
Width: 850 mm
Height: 250 mm
Weight: 2950 kg
Stroke: 200 mm
Ram: 500x380 mm
Table: 700x450 mm
Daylight: 400 mm
Rapid speed: 54 mm/s
Working speed: 18 mm/s
Retraction speed: 90 mm/s
Motor: 7.5 kW
Length: 1680 mm
Width: 850 mm
Height: 250 mm
Weight: 2950 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 260 to
Stroke: 500 mm
Table: 1400x1000 mm
Daylight: 600 mm
Rapid speed: 75 mm/s
Working speed: 5 mm/s
Retraction speed: 60 mm/s
Motor: 22 kW
Length: 2800 mm
Width: 1650 mm
Height: 2750 mm
pressing capacity: 260 to
Stroke: 500 mm
Table: 1400x1000 mm
Daylight: 600 mm
Rapid speed: 75 mm/s
Working speed: 5 mm/s
Retraction speed: 60 mm/s
Motor: 22 kW
Length: 2800 mm
Width: 1650 mm
Height: 2750 mm
Stroke: 500 mm
Table: 1400x1000 mm
Daylight: 600 mm
Rapid speed: 75 mm/s
Working speed: 5 mm/s
Retraction speed: 60 mm/s
Motor: 22 kW
Length: 2800 mm
Width: 1650 mm
Height: 2750 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 170 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
pressing capacity: 170 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 125 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm
pressing capacity: 125 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 85 to
Stroke: 500 mm
Table: 900x600 mm
Daylight: 600 mm
Rapid speed: 105 mm/s
Working speed: 7 mm/s
Retraction speed: 58 mm/s
Motor: 7.5 kW
Length: 2250 mm
Width: 1150 mm
Height: 2400 mm
pressing capacity: 85 to
Stroke: 500 mm
Table: 900x600 mm
Daylight: 600 mm
Rapid speed: 105 mm/s
Working speed: 7 mm/s
Retraction speed: 58 mm/s
Motor: 7.5 kW
Length: 2250 mm
Width: 1150 mm
Height: 2400 mm
Stroke: 500 mm
Table: 900x600 mm
Daylight: 600 mm
Rapid speed: 105 mm/s
Working speed: 7 mm/s
Retraction speed: 58 mm/s
Motor: 7.5 kW
Length: 2250 mm
Width: 1150 mm
Height: 2400 mm