13
Metal working and machine toolsLathesCNC lathes
Swing diameter over bed: 430 mm
Workpiece weight: max. 30 kg
Swing diameter over cross slide: 210 mm
Length between centres: 700 mm
Turning length: max. 510 mm
Speed range: 6.300 rpm
Collet chuck: for 173 E collets
Spindle bore: 45 mm
Jaw chuck Ø max.: 160
Turret: 12 -station
Driven tools: no
Tailstock: yes
Control: Siemens 810 D
Chip conveyor: no
Total power: 17 kW
Weight of machine: 2.600 kg
Space requirement (W x D x H): 2,7 x 2,0 x 2,0 m
Condition: very good
Hours of operation: 24.602 h
Well-maintained machine, rarely used, from a workshop for the disabled, the arm in the parts catcher machine has been removed. This was sent to us via DHL and got lost. Search request with DHL is still ongoing
Accessory: Documentation
Swing diameter over bed: 430 mm
Workpiece weight: max. 30 kg
Swing diameter over cross slide: 210 mm
Length between centres: 700 mm
Turning length: max. 510 mm
Speed range: 6.300 rpm
Collet chuck: for 173 E collets
Spindle bore: 45 mm
Jaw chuck Ø max.: 160
Turret: 12 -station
Driven tools: no
Tailstock: yes
Control: Siemens 810 D
Chip conveyor: no
Total power: 17 kW
Weight of machine: 2.600 kg
Space requirement (W x D x H): 2,7 x 2,0 x 2,0 m
Condition: very good
Hours of operation: 24.602 h
Well-maintained machine, rarely used, from a workshop for the disabled, the arm in the parts catcher machine has been removed. This was sent to us via DHL and got lost. Search request with DHL is still ongoing
Accessory: Documentation
Workpiece weight: max. 30 kg
Swing diameter over cross slide: 210 mm
Length between centres: 700 mm
Turning length: max. 510 mm
Speed range: 6.300 rpm
Collet chuck: for 173 E collets
Spindle bore: 45 mm
Jaw chuck Ø max.: 160
Turret: 12 -station
Driven tools: no
Tailstock: yes
Control: Siemens 810 D
Chip conveyor: no
Total power: 17 kW
Weight of machine: 2.600 kg
Space requirement (W x D x H): 2,7 x 2,0 x 2,0 m
Condition: very good
Hours of operation: 24.602 h
Well-maintained machine, rarely used, from a workshop for the disabled, the arm in the parts catcher machine has been removed. This was sent to us via DHL and got lost. Search request with DHL is still ongoing
Accessory: Documentation
14
Metal working and machine toolsMilling machines
X: 560 mm
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
X: 560 mm
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
10
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 110 mmx-Weg: 2000 mmy-Weg: 1200 mmSpindeldrehzahlen: 6-1250 U/minTischfläche: 1400x900 mmSpindelantriebmotor: 12 kWSpindelaufnahme ISO: 50Spindelweg: 800 mmz-Weg: 1000 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 20 tRaumbedarf ca.: 5x3x2 m
Spindeldurchmesser: 110 mm
x-Weg: 2000 mm
y-Weg: 1200 mm
Spindeldrehzahlen: 6-1250 U/min
Tischfläche: 1400x900 mm
Spindelantriebmotor: 12 kW
Spindelaufnahme ISO: 50
Spindelweg: 800 mm
z-Weg: 1000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 20 t
Raumbedarf ca.: 5x3x2 m
x-Weg: 2000 mm
y-Weg: 1200 mm
Spindeldrehzahlen: 6-1250 U/min
Tischfläche: 1400x900 mm
Spindelantriebmotor: 12 kW
Spindelaufnahme ISO: 50
Spindelweg: 800 mm
z-Weg: 1000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 20 t
Raumbedarf ca.: 5x3x2 m
14
Metal working and machine toolsLathesTurret lathes
Turning diameter: 250 mm
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good
Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used
Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
Turning diameter: 250 mm
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good
Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used
Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good
Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used
Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
11
Metal working and machine toolsMilling machinesOther
X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
14
Metal working and machine toolsMilling machines
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
4
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 150 mmx-Weg: 7200 mmy-Weg: 3800 mmPlattenfeld: 9000x6000 mmDigitalanzeige: AEGTraghülse: Durchmesser: 440 mmTraghülse: Horizontalbewegung: 1000 mmSpindelweg: 1500 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 150 mm
x-Weg: 7200 mm
y-Weg: 3800 mm
Plattenfeld: 9000x6000 mm
Digitalanzeige: AEG
Traghülse: Durchmesser: 440 mm
Traghülse: Horizontalbewegung: 1000 mm
Spindelweg: 1500 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 7200 mm
y-Weg: 3800 mm
Plattenfeld: 9000x6000 mm
Digitalanzeige: AEG
Traghülse: Durchmesser: 440 mm
Traghülse: Horizontalbewegung: 1000 mm
Spindelweg: 1500 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
1
Generators and MotorsAccessories and spare parts
5 core drills (38, 52, 91, 117 and 127 mm) all 170mm long2 x short and 2 x long collets (SDS-Plus and hex)Guide drillEjector pinThe set comes in an aluminum case.
5 core drills (38, 52, 91, 117 and 127 mm) all 170mm long
2 x short and 2 x long collets (SDS-Plus and hex)
Guide drill
Ejector pin
The set comes in an aluminum case.
2 x short and 2 x long collets (SDS-Plus and hex)
Guide drill
Ejector pin
The set comes in an aluminum case.