2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 20 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 16 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 11 kW
Oiltank: 125 l
Support arms: 3 pcs.
Table height: 820 mm
Table width: 494 mm
Table length: 3280 mm
Length: 4100 mm
Width: 2050 mm
Total width with support arm und protection fence: 3650 mm
Height: 1950 mm
Weight: 7980 kg
Cutting length: 3080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 20 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 16 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 11 kW
Oiltank: 125 l
Support arms: 3 pcs.
Table height: 820 mm
Table width: 494 mm
Table length: 3280 mm
Length: 4100 mm
Width: 2050 mm
Total width with support arm und protection fence: 3650 mm
Height: 1950 mm
Weight: 7980 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 20 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 16 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 11 kW
Oiltank: 125 l
Support arms: 3 pcs.
Table height: 820 mm
Table width: 494 mm
Table length: 3280 mm
Length: 4100 mm
Width: 2050 mm
Total width with support arm und protection fence: 3650 mm
Height: 1950 mm
Weight: 7980 kg
2
Metal working and machine toolsLathes
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
10
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7.5 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7.5 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7.5 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 400 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X Achse
Stroke: 365 mm
Inside distance between side frames: 3400 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 5750 mm
Width: 2110 mm
Height: 3640 mm
Weight: 27760 kg
pressing capacity: 400 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X Achse
Stroke: 365 mm
Inside distance between side frames: 3400 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 5750 mm
Width: 2110 mm
Height: 3640 mm
Weight: 27760 kg
Bending length: 4050 mm
Axes: Y1 / Y2 / X Achse
Stroke: 365 mm
Inside distance between side frames: 3400 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 5750 mm
Width: 2110 mm
Height: 3640 mm
Weight: 27760 kg
2
Metal working and machine toolsAccessories and spare parts
6V Openings: 8/11/12/16/24/36 mm
Length: 2500 mm
Width: 70 mm
Height: 70 mm
6V Openings: 8/11/12/16/24/36 mm
Length: 2500 mm
Width: 70 mm
Height: 70 mm
Length: 2500 mm
Width: 70 mm
Height: 70 mm
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 3050 mm
Max. bending capacity - mild steel: 12
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 6.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 8 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 12
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 6.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 8 mm
Max. bending capacity - mild steel: 12
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 6.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 8 mm
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 3050 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 5 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 5 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 5 mm
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2500 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
5
Metal working and machine toolsPressesWorkshop press
pressing capacity: 80 to
Cylinder fix or moveable: horizontal moveable
Stroke: 250 mm
Distance between columns: 1040 mm
Distance between table and toolholder: 865 mm
Piston diameter: 200x120 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 835 kg
pressing capacity: 80 to
Cylinder fix or moveable: horizontal moveable
Stroke: 250 mm
Distance between columns: 1040 mm
Distance between table and toolholder: 865 mm
Piston diameter: 200x120 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 835 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 250 mm
Distance between columns: 1040 mm
Distance between table and toolholder: 865 mm
Piston diameter: 200x120 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 835 kg
1
Metal working and machine toolsPressesEccentric presses
pressing capacity: 40 to
Tonnage rating point: 4 mm
Table length: 630 mm
Table width: 450 mm
Hole in table: 160 mm
Stroke: 3 - 75 mm
Strokes: 154 1/min
Ram: 415 x 275 mm
Ram guides: 8
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 230 mm
Daylight: 293 mm
Motor: 4 kW
Length: 1174 mm
Width: 1540 mm
Height: 2200 mm
Weight: 2850 kg
pressing capacity: 40 to
Tonnage rating point: 4 mm
Table length: 630 mm
Table width: 450 mm
Hole in table: 160 mm
Stroke: 3 - 75 mm
Strokes: 154 1/min
Ram: 415 x 275 mm
Ram guides: 8
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 230 mm
Daylight: 293 mm
Motor: 4 kW
Length: 1174 mm
Width: 1540 mm
Height: 2200 mm
Weight: 2850 kg
Tonnage rating point: 4 mm
Table length: 630 mm
Table width: 450 mm
Hole in table: 160 mm
Stroke: 3 - 75 mm
Strokes: 154 1/min
Ram: 415 x 275 mm
Ram guides: 8
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 230 mm
Daylight: 293 mm
Motor: 4 kW
Length: 1174 mm
Width: 1540 mm
Height: 2200 mm
Weight: 2850 kg
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Further information:
BATTENFELD EM 30/55 UNILOG B6
All-Electric Precision Injection Moulding Machine
The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.
The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:
* very low energy consumption
* high repeatability and precision
* quiet machine operation
* low maintenance requirements
The machine is especially suitable for:
* technical plastic parts
* medical products
* electronic components
* small precision parts
Thanks to its all-electric drive technology, the machine offers:
* significantly lower energy consumption compared to hydraulic machines
* clean production environment
* stable cycle times
* precise dosing and excellent process stability
The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.
With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.
The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Further information:
BATTENFELD EM 30/55 UNILOG B6
All-Electric Precision Injection Moulding Machine
The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.
The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:
* very low energy consumption
* high repeatability and precision
* quiet machine operation
* low maintenance requirements
The machine is especially suitable for:
* technical plastic parts
* medical products
* electronic components
* small precision parts
Thanks to its all-electric drive technology, the machine offers:
* significantly lower energy consumption compared to hydraulic machines
* clean production environment
* stable cycle times
* precise dosing and excellent process stability
The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.
With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.
The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Further information:
BATTENFELD EM 30/55 UNILOG B6
All-Electric Precision Injection Moulding Machine
The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.
The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:
* very low energy consumption
* high repeatability and precision
* quiet machine operation
* low maintenance requirements
The machine is especially suitable for:
* technical plastic parts
* medical products
* electronic components
* small precision parts
Thanks to its all-electric drive technology, the machine offers:
* significantly lower energy consumption compared to hydraulic machines
* clean production environment
* stable cycle times
* precise dosing and excellent process stability
The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.
With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.
The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
5
Metal working and machine toolsAccessories and spare parts
Jaw opening: 120 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
Jaw opening: 120 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
5
Metal working and machine toolsAccessories and spare parts
Jaw opening: 100 mm
jaw height: 32 mm
Opening of upper beam: 135 mm
Weight: 13 kg
Jaw opening: 100 mm
jaw height: 32 mm
Opening of upper beam: 135 mm
Weight: 13 kg
jaw height: 32 mm
Opening of upper beam: 135 mm
Weight: 13 kg
6
Metal working and machine toolsAccessories and spare parts
Jaw opening: 80 mm
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
Jaw opening: 80 mm
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
2
Metal working and machine toolsAccessories and spare parts
Jaw opening: 80 mm
jaw height: 28 mm
Weight: 12 kg
Jaw opening: 80 mm
jaw height: 28 mm
Weight: 12 kg
jaw height: 28 mm
Weight: 12 kg
2
Metal working and machine toolsAccessories and spare parts
Jaw opening: 150 mm
jaw height: 40 mm
Weight: 33 kg
Jaw opening: 150 mm
jaw height: 40 mm
Weight: 33 kg
jaw height: 40 mm
Weight: 33 kg
8
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 4000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 4000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 4000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
4
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 13 mm
Taper: MK 2
Distance spindle - column: 220 mm
Revs: 40 - 4000 r.p.m.
Tapping capacity: M 10 (depends on gradient)
Quill travel: 60 mm
Distance spindle - table: 85 - 370 mm
Distance spindle-base: 420 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 520 mm
Width: 400 mm
Height: 850 mm
Weight: 62 kg
Drilling capacy mild steel: 13 mm
Taper: MK 2
Distance spindle - column: 220 mm
Revs: 40 - 4000 r.p.m.
Tapping capacity: M 10 (depends on gradient)
Quill travel: 60 mm
Distance spindle - table: 85 - 370 mm
Distance spindle-base: 420 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 520 mm
Width: 400 mm
Height: 850 mm
Weight: 62 kg
Taper: MK 2
Distance spindle - column: 220 mm
Revs: 40 - 4000 r.p.m.
Tapping capacity: M 10 (depends on gradient)
Quill travel: 60 mm
Distance spindle - table: 85 - 370 mm
Distance spindle-base: 420 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 520 mm
Width: 400 mm
Height: 850 mm
Weight: 62 kg
5
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 30
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg
Shaft diameter: 30
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg
1
Metal working and machine toolsAccessories and spare parts
Length: 835 mm
Length: 835 mm
8
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
5
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
11
Printing machineryFolding machines
Herzog Heymann Vacuum belt
Herzog & Heymann suction belt section, with alignment section.
1 alignment ruler.
3 tool shafts diameter 30 mm,
4 suction and 2 conveyor belts (lenght 3.3m).
Working width 72 cm, electrically height adjustable.
Suction belt section length 3.30 m.
Total machine length: ± 5.0m
Total machine width 1.1 m
Complete with HSS C 1100 gluing system, with 3 cold glue nozles
Some tooling and spare parts
Herzog Heymann Vacuum belt
Herzog & Heymann suction belt section, with alignment section.
1 alignment ruler.
3 tool shafts diameter 30 mm,
4 suction and 2 conveyor belts (lenght 3.3m).
Working width 72 cm, electrically height adjustable.
Suction belt section length 3.30 m.
Total machine length: ± 5.0m
Total machine width 1.1 m
Complete with HSS C 1100 gluing system, with 3 cold glue nozles
Some tooling and spare parts
Woodworking machineryExhaust systemsDeduster
Anschlußdurchmesser: . mmSaugleistung: 6.500 m³/hUnterdruck: max. ca. 3.400 paFilterfläche: 80 m²Anschluß: 400 VFrequenz: 50 HzAntrieb: 5,5 kWLuftmenge: max. ca. 8.100 m³/hAbmessungen: ca. 1400x800x2910 BxTxH mm
Anschlußdurchmesser: . mm
Saugleistung: 6.500 m³/h
Unterdruck: max. ca. 3.400 pa
Filterfläche: 80 m²
Anschluß: 400 V
Frequenz: 50 Hz
Antrieb: 5,5 kW
Luftmenge: max. ca. 8.100 m³/h
Abmessungen: ca. 1400x800x2910 BxTxH mm
Saugleistung: 6.500 m³/h
Unterdruck: max. ca. 3.400 pa
Filterfläche: 80 m²
Anschluß: 400 V
Frequenz: 50 Hz
Antrieb: 5,5 kW
Luftmenge: max. ca. 8.100 m³/h
Abmessungen: ca. 1400x800x2910 BxTxH mm
10
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 205 mmx-Weg: 10000 mmy-Weg: 2500 mmw-Achse: 500 mmSpindelweg: 1250 mmSteuerung: HeidenhainTyp: TNC 355Spindelaufnahme ISO: 50Getriebestufen: 2Vorschub - selbsttätig: 0-3000 mmSpindelantrieb: 37 kWGesamtleistungsbedarf: 70 kWMaschinengewicht ca.: tRaumbedarf ca.: 14,1x3,2x5,6 m
Spindeldurchmesser: 205 mm
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m
2
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 4800x34x1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 360 mm
Cutting capacity 0° square: 360 mm
Cutting capacity 0° flat: 510x360 mm
Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 390 x 360 mm
Cutting capacity 60°: rund 250 mm, quadrat 220 mm, rechteck 220 x 360 mm
Cutting capacity - 60°: rund 280 mm, quadrat 260 mm, rechteck 260 x 360 mm
Working height: 860 mm
Hydraulic motor: 0.37 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2650 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1450 kg
Saw frame: Pivot frame
Band dimensions: 4800x34x1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 360 mm
Cutting capacity 0° square: 360 mm
Cutting capacity 0° flat: 510x360 mm
Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 390 x 360 mm
Cutting capacity 60°: rund 250 mm, quadrat 220 mm, rechteck 220 x 360 mm
Cutting capacity - 60°: rund 280 mm, quadrat 260 mm, rechteck 260 x 360 mm
Working height: 860 mm
Hydraulic motor: 0.37 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2650 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1450 kg
Band dimensions: 4800x34x1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 360 mm
Cutting capacity 0° square: 360 mm
Cutting capacity 0° flat: 510x360 mm
Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 390 x 360 mm
Cutting capacity 60°: rund 250 mm, quadrat 220 mm, rechteck 220 x 360 mm
Cutting capacity - 60°: rund 280 mm, quadrat 260 mm, rechteck 260 x 360 mm
Working height: 860 mm
Hydraulic motor: 0.37 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2650 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1450 kg
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Rohrdurchmesser: . mmWandstärke: 15 St52 und Edelstahl mmBiegeradius min.: 6-120 mmBiegewinkel max.: 150 °Maschinengewicht ca.: 1,7 KgRaumbedarf ca.: 2000x2000x1300 m
Rohrdurchmesser: . mm
Wandstärke: 15 St52 und Edelstahl mm
Biegeradius min.: 6-120 mm
Biegewinkel max.: 150 °
Maschinengewicht ca.: 1,7 Kg
Raumbedarf ca.: 2000x2000x1300 m
Wandstärke: 15 St52 und Edelstahl mm
Biegeradius min.: 6-120 mm
Biegewinkel max.: 150 °
Maschinengewicht ca.: 1,7 Kg
Raumbedarf ca.: 2000x2000x1300 m
Metal working and machine toolsSheet metal working machinesPiercing presses
Rohrdurchmesser: 40-168 mmWandstärke: . mmBiegeradius min.: ohne Rohr 190 mmNachdruckvorrichtung: mitElektromotor: 30 kWSpannung: 380 VBetriebsdruck: 200 barDoppelregelpumpe: je. 46 l/mPumpensteuerung: 4/3 Wege VentilePumpendruckmittel: Hydrauliköl der HLP 300 ltr.Antrieb: Hydraulikzyl. RollenketteE-Steuerung: Tastatur, Steuerung SPSGesamtleistungsbedarf: kWMaschinengewicht ca.: 22 tRaumbedarf ca.: 30 m2 m
Rohrdurchmesser: 40-168 mm
Wandstärke: . mm
Biegeradius min.: ohne Rohr 190 mm
Nachdruckvorrichtung: mit
Elektromotor: 30 kW
Spannung: 380 V
Betriebsdruck: 200 bar
Doppelregelpumpe: je. 46 l/m
Pumpensteuerung: 4/3 Wege Ventile
Pumpendruckmittel: Hydrauliköl der HLP 300 ltr.
Antrieb: Hydraulikzyl. Rollenkette
E-Steuerung: Tastatur, Steuerung SPS
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 22 t
Raumbedarf ca.: 30 m2 m
Wandstärke: . mm
Biegeradius min.: ohne Rohr 190 mm
Nachdruckvorrichtung: mit
Elektromotor: 30 kW
Spannung: 380 V
Betriebsdruck: 200 bar
Doppelregelpumpe: je. 46 l/m
Pumpensteuerung: 4/3 Wege Ventile
Pumpendruckmittel: Hydrauliköl der HLP 300 ltr.
Antrieb: Hydraulikzyl. Rollenkette
E-Steuerung: Tastatur, Steuerung SPS
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 22 t
Raumbedarf ca.: 30 m2 m
10
Food machinesConfectionery production
JKV Hermes JKV30 chocolate tempering machine, Stainless, chocolate tempering moulding machine with vibratory table, adjustable temperature controls, mobile, 3 in stock, 1PH
JKV Hermes JKV30 chocolate tempering machine, Stainless, chocolate tempering moulding machine with vibratory table, adjustable temperature controls, mobile, 3 in stock, 1PH
7
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 42 mm
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Steel: M 25, Cast Iron: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
Drilling capacy mild steel: 42 mm
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Steel: M 25, Cast Iron: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Steel: M 25, Cast Iron: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
12
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 441 cm³
Shot weight: 395 g
Injection pressure: 2268 bar
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Further information:
FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production
The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.
One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.
The K-TEC series is especially preferred for:
• Thin-wall packaging products
• Technical parts with fine surface details
• Lid and container production
• High-flow applications
• High-speed serial production processes
Advantages of the nitrogen-supported system:
• Extremely fast injection performance
• More stable pressure control
• Better reproduction of fine details
• Improved filling of thin-wall products
• Shorter cycle times
• High process stability
The K-TEC series is also known for:
• High repeatability
• Sensitive mould protection
• Low cycle times
• Long-lasting mechanical construction
• Suitability for heavy industrial operating conditions
The machine was actively running in production until it was removed from operation and was working without problems until the very end.
Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 441 cm³
Shot weight: 395 g
Injection pressure: 2268 bar
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Further information:
FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production
The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.
One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.
The K-TEC series is especially preferred for:
• Thin-wall packaging products
• Technical parts with fine surface details
• Lid and container production
• High-flow applications
• High-speed serial production processes
Advantages of the nitrogen-supported system:
• Extremely fast injection performance
• More stable pressure control
• Better reproduction of fine details
• Improved filling of thin-wall products
• Shorter cycle times
• High process stability
The K-TEC series is also known for:
• High repeatability
• Sensitive mould protection
• Low cycle times
• Long-lasting mechanical construction
• Suitability for heavy industrial operating conditions
The machine was actively running in production until it was removed from operation and was working without problems until the very end.
Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 441 cm³
Shot weight: 395 g
Injection pressure: 2268 bar
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Further information:
FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production
The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.
One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.
The K-TEC series is especially preferred for:
• Thin-wall packaging products
• Technical parts with fine surface details
• Lid and container production
• High-flow applications
• High-speed serial production processes
Advantages of the nitrogen-supported system:
• Extremely fast injection performance
• More stable pressure control
• Better reproduction of fine details
• Improved filling of thin-wall products
• Shorter cycle times
• High process stability
The K-TEC series is also known for:
• High repeatability
• Sensitive mould protection
• Low cycle times
• Long-lasting mechanical construction
• Suitability for heavy industrial operating conditions
The machine was actively running in production until it was removed from operation and was working without problems until the very end.
Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
7
Food machinesPackaging machinery
Seal It Systems ET-900L semi automatic heat seal machine, Serial: 590, 2015, semi auto heat sealer, pot sealer, currently set for 130mm diameter pots, with adjustable temperature control, with counter, 1Ph
Seal It Systems ET-900L semi automatic heat seal machine, Serial: 590, 2015, semi auto heat sealer, pot sealer, currently set for 130mm diameter pots, with adjustable temperature control, with counter, 1Ph
5
Food machinesOther
Spirotech Screw conveyor, 2018, Stainless, screw diameter 300mm, screw length 3100mm, 3Kw, 3Ph
Spirotech Screw conveyor, 2018, Stainless, screw diameter 300mm, screw length 3100mm, 3Kw, 3Ph
5
Food machinesOther
Spirotech screw conveyor, 2018, Stainless screw conveyor, 50Kg hopper, screw diameter 300mm, screw length 2300mm, 2.2Kw, 3Ph
Spirotech screw conveyor, 2018, Stainless screw conveyor, 50Kg hopper, screw diameter 300mm, screw length 2300mm, 2.2Kw, 3Ph
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 600 mm
Table: 900 x 500 mm
Daylight: 800 mm
Throat depth: 400 mm
Rapid speed: 220 mm/s
Working speed: 1 - 20 mm/s
Retraction speed: 250 mm/s
Motor: 14 kW
Working pressure: 30 - 239 bar
Length: 1900 mm
Width: 1700 mm
Height: 4400 mm
Weight: 6000 kg
pressing capacity: 100 to
Stroke: 600 mm
Table: 900 x 500 mm
Daylight: 800 mm
Throat depth: 400 mm
Rapid speed: 220 mm/s
Working speed: 1 - 20 mm/s
Retraction speed: 250 mm/s
Motor: 14 kW
Working pressure: 30 - 239 bar
Length: 1900 mm
Width: 1700 mm
Height: 4400 mm
Weight: 6000 kg
Stroke: 600 mm
Table: 900 x 500 mm
Daylight: 800 mm
Throat depth: 400 mm
Rapid speed: 220 mm/s
Working speed: 1 - 20 mm/s
Retraction speed: 250 mm/s
Motor: 14 kW
Working pressure: 30 - 239 bar
Length: 1900 mm
Width: 1700 mm
Height: 4400 mm
Weight: 6000 kg
9
Metal working and machine toolsSanding machinesOther
Schleiflänge: . mmSchleifbreite: . mmWerkstückhöhe: . mmTisch: 870x130 mmGesamtleistungsbedarf: 2,5 kWMaschinengewicht ca.: 0,8 tRaumbedarf ca.: 2x1x2 m
Schleiflänge: . mm
Schleifbreite: . mm
Werkstückhöhe: . mm
Tisch: 870x130 mm
Gesamtleistungsbedarf: 2,5 kW
Maschinengewicht ca.: 0,8 t
Raumbedarf ca.: 2x1x2 m
Schleifbreite: . mm
Werkstückhöhe: . mm
Tisch: 870x130 mm
Gesamtleistungsbedarf: 2,5 kW
Maschinengewicht ca.: 0,8 t
Raumbedarf ca.: 2x1x2 m
Metal working and machine toolsMachining centersMachining centers horizontal
Nummer:: 941264Steuerung: Fadal CNC 88 HSWerkzeugwechsler: 21-fachAchsen: 3Sonstiges:: mit Späneaustrag
Nummer:: 941264
Steuerung: Fadal CNC 88 HS
Werkzeugwechsler: 21-fach
Achsen: 3
Sonstiges:: mit Späneaustrag
Steuerung: Fadal CNC 88 HS
Werkzeugwechsler: 21-fach
Achsen: 3
Sonstiges:: mit Späneaustrag
9
ForkliftsGas forklifts
Tragkraft in kg: . kgHub: . mmGabellänge: . mm
Tragkraft in kg: . kg
Hub: . mm
Gabellänge: . mm
Hub: . mm
Gabellänge: . mm
11
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 130 mmx-Weg: 6000 mmy-Weg: 2500 mmz-Weg: 800 mmw-Weg: 600 mmEilgang: 10 m/minSpindeldrehzahl:: 1600 UPMSpäneförderer: vorneSteuerung: Seit 1998 HeidenhainPlattenfeld: 6000x4000 mmAntriebsleistung: 45 kW
Spindeldurchmesser: 130 mm
x-Weg: 6000 mm
y-Weg: 2500 mm
z-Weg: 800 mm
w-Weg: 600 mm
Eilgang: 10 m/min
Spindeldrehzahl:: 1600 UPM
Späneförderer: vorne
Steuerung: Seit 1998 Heidenhain
Plattenfeld: 6000x4000 mm
Antriebsleistung: 45 kW
x-Weg: 6000 mm
y-Weg: 2500 mm
z-Weg: 800 mm
w-Weg: 600 mm
Eilgang: 10 m/min
Spindeldrehzahl:: 1600 UPM
Späneförderer: vorne
Steuerung: Seit 1998 Heidenhain
Plattenfeld: 6000x4000 mm
Antriebsleistung: 45 kW
6
Metal working and machine toolsLathesCenter lathes and spindle lathes
Drehdurchmesser über Bett: . mmDrehdurchmesser über Support: . mmDrehlänge: . mmDurchlass: mmNummer:: 16304188/Drehdurchmesser: mm
Drehdurchmesser über Bett: . mm
Drehdurchmesser über Support: . mm
Drehlänge: . mm
Durchlass: mm
Nummer:: 16304188/
Drehdurchmesser: mm
Drehdurchmesser über Support: . mm
Drehlänge: . mm
Durchlass: mm
Nummer:: 16304188/
Drehdurchmesser: mm
10
Metal working and machine toolsLathesLathes
Drehdurchmesser: 890 mmDrehlänge: 3000 mmDrehdurchmesser über Support: 550 mmSteuerung: Fagor 8055i ATCRevolver: 8Reitstock: MK 6Drehdurchmesser in der Kröpfung: 1220 mmLänge der Kröpfung: 450 mmSpindeldurchlass: 106 mmDrehzahl: 15-1480 U/minDreibackenfutter: 400 mmLünette: 300 mm
Drehdurchmesser: 890 mm
Drehlänge: 3000 mm
Drehdurchmesser über Support: 550 mm
Steuerung: Fagor 8055i ATC
Revolver: 8
Reitstock: MK 6
Drehdurchmesser in der Kröpfung: 1220 mm
Länge der Kröpfung: 450 mm
Spindeldurchlass: 106 mm
Drehzahl: 15-1480 U/min
Dreibackenfutter: 400 mm
Lünette: 300 mm
Drehlänge: 3000 mm
Drehdurchmesser über Support: 550 mm
Steuerung: Fagor 8055i ATC
Revolver: 8
Reitstock: MK 6
Drehdurchmesser in der Kröpfung: 1220 mm
Länge der Kröpfung: 450 mm
Spindeldurchlass: 106 mm
Drehzahl: 15-1480 U/min
Dreibackenfutter: 400 mm
Lünette: 300 mm
10
Metal working and machine toolsLathesLathes
Drehdurchmesser: 475 mmDrehlänge: 1500 mmSteuerung: Fagor 8055TRevolver: 8Drehdurchmesser über Support: 240 mmDrehdurchmesser in der Kröpfung: 710 mmLänge der Kröpfung: 350 mmSpindeldurchlass: 51 mmDrehzahl: 100-4500 U/minLeistung: 7/11 KWDreibackenfutter: 250 mmLünette: 230 mm
Drehdurchmesser: 475 mm
Drehlänge: 1500 mm
Steuerung: Fagor 8055T
Revolver: 8
Drehdurchmesser über Support: 240 mm
Drehdurchmesser in der Kröpfung: 710 mm
Länge der Kröpfung: 350 mm
Spindeldurchlass: 51 mm
Drehzahl: 100-4500 U/min
Leistung: 7/11 KW
Dreibackenfutter: 250 mm
Lünette: 230 mm
Drehlänge: 1500 mm
Steuerung: Fagor 8055T
Revolver: 8
Drehdurchmesser über Support: 240 mm
Drehdurchmesser in der Kröpfung: 710 mm
Länge der Kröpfung: 350 mm
Spindeldurchlass: 51 mm
Drehzahl: 100-4500 U/min
Leistung: 7/11 KW
Dreibackenfutter: 250 mm
Lünette: 230 mm
6
Food machinesOther
Vulcatech Flighted elevator conveyor, Stainless, flighted elevator conveyor, variable speed, belt width 300mm, elevates from 600mm to 1000mm, 1Ph
Vulcatech Flighted elevator conveyor, Stainless, flighted elevator conveyor, variable speed, belt width 300mm, elevates from 600mm to 1000mm, 1Ph
7
Food machinesOther
Polar Systems Vibratory conveyor, 2017, Stainless, vibratory conveyor, vibratory conveyor dimensions 1500mm x 300mm, adjustable vibration controls, 3Ph
Polar Systems Vibratory conveyor, 2017, Stainless, vibratory conveyor, vibratory conveyor dimensions 1500mm x 300mm, adjustable vibration controls, 3Ph
4
Food machinesAccessories and spare parts
Digi DPS-800S Platform scale, Serial: 190282202, Stainless platform scale, touch screen controls, 0.001g to 30Kg, platform 600mm x 500mm, 1Ph
Digi DPS-800S Platform scale, Serial: 190282202, Stainless platform scale, touch screen controls, 0.001g to 30Kg, platform 600mm x 500mm, 1Ph
8
Food machinesAccessories and spare parts
Logopak 410 IIIF Labeller, Serial: LP10021552, Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,
Logopak 410 IIIF Labeller, Serial: LP10021552, Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,
4
AS Conveyor, Variable speed conveyor, belt dimensions 600mm x 300mm, 1Ph
AS Conveyor, Variable speed conveyor, belt dimensions 600mm x 300mm, 1Ph
4
AS Conveyor, Variable speed conveyor, belt dimensions 600mm x 300mm, with counter, 3Ph
AS Conveyor, Variable speed conveyor, belt dimensions 600mm x 300mm, with counter, 3Ph
9
Food machinesPackaging machinery
Food Machinery Co E4230 VFFS bagger, 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph
Food Machinery Co E4230 VFFS bagger, 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph
4
Food machinesOther
NNP flighted elevator conveyor, 2014, Stainless conveyor, variable speed, elevates from 200mm to 1000mm, belt width 300mm, 1Ph
NNP flighted elevator conveyor, 2014, Stainless conveyor, variable speed, elevates from 200mm to 1000mm, belt width 300mm, 1Ph