Lot 86 Combina Side labeller Model: 01-120RH Pneu Wipe Serial: 0004-12 Automatic side self adhesive label applicator with pneumatic wipe on arm conveyor

Lot 230 Ariana Converger Stainless, 5 lanes into one, 5 x 60mm wide lanes into 120 x 60mm conveyor,adjustable side guides, easy adjust infeed height, product sensor.

Lot 225 Loma Checkweigher model: 6000 serial: ACW40347-05796 1999, Stainless, Variable speed, overall 1080 x 150mm, weigh bed 300mm x 120mm. 1ph.

Lot 210 Balpe SAS model: 9PL/20 serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature. See video at: http://www.youtube.com/watch?v=0KM0H9csFDU

Lot 177 Regal Packaging Low Level Single Head Pneumatic Depositor Model:1400 Serial:136 Stainless, low level, PLC controlled mobile unit

Lot 176 NNP Stainless conveyor Stainless frame, black rubberised belt, belt dimensions 1700mm x 340mm

Lot 163 Marpet fabrications Stainless S Bend conveyor Serial: 211209 2009, Stainless mobile frame, intralox mesh belt, 4200mm 1st leg to bend 1600mm 2nd leg from bend. Overall dimensions 300mmx4000mm

lot 113 Formaco meat former press Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press, votage/Hz 3x400/50, 16Amp

Lot 112 NNP Gravity roller conveyor drawbridge Stainless, Dimensions 1900x500mm.

Lot 99 Wolfking Belham Multi needle injector Model:B1-15S Serial:8207-01303 120 needles, walking bed product advancement, width of area 500mm length 1500mm

Lot 25 Apple engineering Pneumatic Depositor Model: MR150 2004 Stainless depositor with 75L horizontal paddle mixing hopper, 2-150gm on mobile height adjustable frame

Stainless can opener, pressure pad operated by hand or foot, mounted on stainless table 1200x600mm

Stainless unit with 2 vertical pistons able to dose up 2L per cycle container to fill by hand or pass conveyor under fillling head manifold 180mm centres

Powder coated height adjustable frame

316 stainless , scrape surface

The SENC-700 Waterproof Computer Enclosure is designed to protect tower or desktop PCs and TFT LCD screens (including touch screens) up to 19".

The SENC-700 Waterproof Computer Enclosure is designed to protect tower or desktop PCs and TFT LCD screens (including touch screens) up to 19".

The SENC-700 Waterproof Computer Enclosure is designed to protect tower or desktop PCs and TFT LCD screens (including touch screens) up to 19".

protective cabinet that can house conventional rack mountable equipment up to a maximum capacity of 18U. Built to IP65, this stainless steel server cabinet can protect the enclosed equipment from wet or humid conditions and is ideal for food processing or

protective cabinet that can house conventional rack mountable equipment up to a maximum capacity of 18U. Built to IP65, this stainless steel server cabinet can protect the enclosed equipment from wet or humid conditions and is ideal for food processing or

protective cabinet that can house conventional rack mountable equipment up to a maximum capacity of 18U. Built to IP65, this stainless steel server cabinet can protect the enclosed equipment from wet or humid conditions and is ideal for food processing or

protective cabinet that can house conventional rack mountable equipment up to a maximum capacity of 18U. Built to IP65, this stainless steel server cabinet can protect the enclosed equipment from wet or humid conditions and is ideal for food processing or

Stainless 75L water jacketed hopper with 50mm securing base nut

10 KW stainless oven goes with lot number

Top fill and top empty, in fork truck frame, used to feed plastic pellets, fluidiser on base of cone

15-250gm piece weight, up to 2500 pieces per hour top 600 bottom 800mm http://www.praegel.dk/data/files/dokumenter/erka/04bsaen.pdftop

Mobile Stainless big bag filling station , Bag spout clamp, pneumatic bag lifting arms

Plastic 200mm wide slats 1200 and 900mm centre of straight sections to bend

Joki end drive, 400mm belt 3600mm long, frame side walls missing

420mm vertical seal x 260mm Jaws, print registration and Preston coder

stainless construction cut up to 290mm diameter product head can index on a turntable and travel back and forth through 5 linear cut discs

Stainless mobile height adjustable single head pneumatic depositor with variable speed scroll feeder in hopper for positive product feeding

200 L Stainless vessel, 2 top mounted paddle stirrers, vessel 45 degree sloped base to outlet

Mobile height adjustable frame,

Scissor lift

Max capacity: 500 kg
Platform: 1.5 x 1 meter.

Max height: 1.04 meter
Min height: 0.23 meter
380 Volt

Powered Feed Roller

Cutting Shear: 3 knife units
Creasing unit: 8 creasing units

GTS Countmaster 1053

With stoke inserter

230 volt
Max stack height: 140 mm
Max paper size: 350 x 600 mm
Min paper size: 45

Branson sonifier J-a 12 High frequency welding device

230 volt,

Ascon
Model: 1000
Year 2002

Automatic rotating

Afmeting 72 x 115 cm
Capacity 1000 kg

Complete humidification system

WIth 3 hymodification units:

ML Princess 2 is part of a complete high pressure humidification system with one or more humidification units.
Every unit consists of a nozzle ring with 8 nozzles and a built-in fan. ML princess 2

Rietschle / Polar Blower

Year: 1993
Type: CEV 3709-D 5

Motor: 1.1 KW

Polar 155 EMC 1 with microcut system

Year 1980
Complete with spare knife
Cutting size 155 cm

Polar 145 EL

With Gergeck System six computer installed
Cutting width 145 cm

Complete with spare knife

Characteristics: ZAPAK ZP93 A, complete with trolley and now roll of strapping material

Adjustable force, ZP93A maximum 250 kg (2500 N)
Bosch 18V Li-Ion 4.0Ah rechargeable battery for +/- 440 straps
Very high friction on the seal, no need for metal clamps anymore
Adjustable sealing time
The lightest strapper in the market in terms of weight
Easy “One-Step” strapping entry
Computer controlled operation monitoring system
Self-adjustable tire width at the front and rear to ensure the perfect tire
Cutting blade and other consumable parts are easily replaceable
Technical specifications
Power supply: rechargeable battery
Sealing type: friction

Belt tension: automatic/manual
Strap material: PP and PET strap
Material thickness: PP and PET 0.70 - 1.27 mm
Material width: PP and PET 9 - 16 mm
Seal recovery: 80%+-5% of tire breaking strength
Sealing time: adjustable from 0.6 to 4.8 seconds
Force setting: from 10 kg to 250 kg
Weight: 3.4 kg, including battery

Workingwidth 1500 mm

Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct

Becker DVT 60

Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000

Automatic closing window

Hardened die plate

Rietschle Druvac KTA 100/2

Year 1996
Volume: 100m3/h
Pressure: +0,7 bar
Vacuum - 0.6 bar

Platen press / Diecutter - clamp shell die cutter

Cauhe VA ( 1450 x 1850 mm )
Model VA
Year 2000

Automatic window

Pileturner

Ascon
Model 1000

Size 800 x 1100 mm
Capacity 1000 kg