Please wait...

7
Metal working and machine toolsDrilling machines and boring mills
Table size: 260 x 260 mm Speed range: 380/725/960/1390/2080 rpm Taper fixture: MK2 Quill ram: 70 mm Drilling performance: 20 mm Total power: 0,8 kW Weight of machine: 105 kg Space requirement (W x D x H): 1,0 x 0,3 x 1,0 m Condition: sehr gut Drill chuck - 16 mm, well-maintained machine, little used Accessory: no additional accessories
Table size: 260 x 260 mm
Speed range: 380/725/960/1390/2080 rpm
Taper fixture: MK2
Quill ram: 70 mm
Drilling performance: 20 mm
Total power: 0,8 kW
Weight of machine: 105 kg
Space requirement (W x D x H): 1,0 x 0,3 x 1,0 m
Condition: sehr gut

Drill chuck - 16 mm, well-maintained machine, little used

Accessory: no additional accessories
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18542 Hersteller: ENGEL Year of construction: 2017 Clamping unit Clamping force: 110 ton Opening stroke: 500 mm Mould height min.: 300 mm Opening width: 800 mm Platen size (h x v): 740 x 680 mm Injection unit Screw diameter: 40 mm Injection volume: 251 cm³ Shot weight: 225 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,9 x 1,5 x 2,0 m Machine weight: 7,4 kg Additional information & extras Core pull: 4 pcs Air valve: 1 pcs Robot Producer: Sepro Type: S5-15 Year: 2016 Weight: 430 kg
Ref. no.: 18542
Hersteller: ENGEL
Year of construction: 2017

Clamping unit
Clamping force: 110 ton
Opening stroke: 500 mm
Mould height min.: 300 mm
Opening width: 800 mm
Platen size (h x v): 740 x 680 mm

Injection unit
Screw diameter: 40 mm
Injection volume: 251 cm³
Shot weight: 225 g
Injection pressure: 2020 bar

Measurements and weight
Dimensions: 4,9 x 1,5 x 2,0 m
Machine weight: 7,4 kg

Additional information & extras
Core pull: 4 pcs
Air valve: 1 pcs

Robot
Producer: Sepro
Type: S5-15
Year: 2016
Weight: 430 kg
6
Zyklendrehmaschine Kern CD 320×750Artikelnummer: 04-02-091Hersteller: KernSehr guter AllgemeinzustandLieferzeit: sofort verfügbarMaschine werkstattgeprüftBaujahr: ca.2000L x B x H: ca.3000x2500x1800mmGewicht: ca.2000kgDrehdurchmesser über Bett: ca.320mmDrehdurchmesser über Planschlitten: ca.150mmSpitzenweite: ca.750mmMax.Werkstückgewicht: ca.350kgSchlitten X Richtung: ca.200mmSchlitten Z Bewegung: ca.750mmDrehzahl: ca.1-4000 U/minSpindelbohrung: ca.50mmWerkzeugrevolver: 8 StationenReitstockaufnahme: MK4Steuerung: Manual PlusVorschubgeschwindigkeit: ca.X: 0,001 - 1.000 mm/-1Vorschubgeschwindigkeit: ca.Z: 0,001 - 2.000 mm/-1Eilgänge: ca.X5 / Z10 m/minZubehör:Kühlmitteleinrichtung3-BacklenfutterDokumentationWerkzeugrevolverWeiteres Zubehör auf AnfragePreis und weitere technische Daten auf Anfrage
Zyklendrehmaschine Kern CD 320×750

Artikelnummer: 04-02-091
Hersteller: Kern

Sehr guter Allgemeinzustand
Lieferzeit: sofort verfügbar
Maschine werkstattgeprüft

Baujahr: ca.2000
L x B x H: ca.3000x2500x1800mm
Gewicht: ca.2000kg

Drehdurchmesser über Bett: ca.320mm
Drehdurchmesser über Planschlitten: ca.150mm
Spitzenweite: ca.750mm
Max.Werkstückgewicht: ca.350kg
Schlitten X Richtung: ca.200mm
Schlitten Z Bewegung: ca.750mm
Drehzahl: ca.1-4000 U/min
Spindelbohrung: ca.50mm
Werkzeugrevolver: 8 Stationen
Reitstockaufnahme: MK4
Steuerung: Manual Plus
Vorschubgeschwindigkeit: ca.X: 0,001 - 1.000 mm/-1
Vorschubgeschwindigkeit: ca.Z: 0,001 - 2.000 mm/-1
Eilgänge: ca.X5 / Z10 m/min

Zubehör:

Kühlmitteleinrichtung
3-Backlenfutter
Dokumentation
Werkzeugrevolver

Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
3
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: 200 mmBohrtiefe: 3500 mmUmlaufdurchmesser: 700 mmDrehzahl: 475 U/minLünette: 275 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: 200 mm
Bohrtiefe: 3500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 275 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: 200 mmBohrtiefe: 2500 mmUmlaufdurchmesser: 700 mmDrehzahl: 475 U/minLünette: 370 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: 200 mm
Bohrtiefe: 2500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 370 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18404 Hersteller: ARBURG Year of construction: 2001 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Injection pressure: 1670 bar Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Machine weight: 5100 kg Additional information & extras Core pull: 1 pcs
Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001

Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar

Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg

Additional information & extras
Core pull: 1 pcs
10
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: 50-600 mmBohrtiefe: 6000 mmTischbelastung: 6 tDrehzahl: 50-600 U/minEinspanndurchmesser max.: 650 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: 50-600 mm
Bohrtiefe: 6000 mm
Tischbelastung: 6 t
Drehzahl: 50-600 U/min
Einspanndurchmesser max.: 650 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18383 Hersteller: DEMAG Year of construction: 2008 Clamping unit Clamping force: 420 ton Opening stroke: 770 mm Distance between tie bars: 820 X 820 mm Mould height min.: 380 mm Mould height max.: 825 mm Platen size (h x v): 1200 X 1100 mm Injection unit Screw diameter: 60 mm Injection volume: 890 cm³ Shot weight: 810 g Injection pressure: 2420 bar Measurements and weight Dimensions: 8,2 X 2,2 X 2,4 m Machine weight: 22300 kg Additional information & extras Core pull: 4 pcs Air valve: 7 pcs Hot runner systems: 8 pcs.
Ref. no.: 18383
Hersteller: DEMAG
Year of construction: 2008

Clamping unit
Clamping force: 420 ton
Opening stroke: 770 mm
Distance between tie bars: 820 X 820 mm
Mould height min.: 380 mm
Mould height max.: 825 mm
Platen size (h x v): 1200 X 1100 mm

Injection unit
Screw diameter: 60 mm
Injection volume: 890 cm³
Shot weight: 810 g
Injection pressure: 2420 bar

Measurements and weight
Dimensions: 8,2 X 2,2 X 2,4 m
Machine weight: 22300 kg

Additional information & extras
Core pull: 4 pcs
Air valve: 7 pcs
Hot runner systems: 8 pcs.
14
Air pressure: 6 bar Transport speed: 3 - 30 mtr/min. Welding frame dimension: 580 x 440 mm Film core diameter: 76 mm Max. film roll diameter: 300 mm Max. product hight: 180 mm Film thickness: 7 to 60 mµ Max. film width: 550 mm Cyclic output: 40 cycle/min Total power: 3,7 kW Weight of machine: 560 kg Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m Condition: good Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils Accessory: no other accessories, documentation
Air pressure: 6 bar
Transport speed: 3 - 30 mtr/min.
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m
Condition: good

Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils

Accessory: no other accessories, documentation
7
Vertical injection molding machine ENGEL INSERT 750H/240 Year: 2007 Working hours : 71 412 hours Clamping force: 240 T Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2 Minimum mold thickness: 480 mm Maximum space between platen : 880 mm Opening stroke: 405 mm Ejector stroke: 105 mm Ejector force: 20.1 KN Diameter of centering washers on fixed and mobile plate: 160 mm Injection unit: Screw diameter: 45 mm Injection volume: 318 cm3 Injection pressure: 1762 bar Injection rate: 229 cm3/sec Number of heating zones: 6 Nozzle stroke: 350 mm 2 hydraulic core pull Dimensions: 4960 x 3656 x 3360mm Weight: 14500KG
Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm

Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm

2 hydraulic core pull

Dimensions:
4960 x 3656 x 3360mm

Weight: 14500KG
4
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Injection moulding machine SANDRETTO serie 9 - 165 T Reference serie 9 165/650 Year 2001 Screw diameter : 38mm Injectable volume : 250 cm3 Injection Pressure : 2597 bars Injection speed : 106 cm3/sec Distance between tie bar : 460 x 460 mm Platen dimension : 690 x 690 mm Mold thickness : mini : 155 – maxi : 560 mm Interface robot 3 core pull 1 air valve + SEPRO robot
Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot
3
Plastic processing machinesInjection molding machinesPlastic injection molding machines
NEGRI BOSSI 480 T Clamping Force: 480T reference : 4800 H 3800 Screw diameter: 90 mm L/D ratio: 20 Maximum material pressure: 1500 bar Injection volume : 2160 cm3 Injection capacity: 2270 g Injection speed: 500mm/s Plastification: 105 g/s Clearence between tie bars (H x V): 710 x 800 Platen dimensions (H x V): 1190 x 1150 Max mold thickness: 850mm Minimum mold thickness: 200mm Ejection stroke: 300mm Air cores: 2 Hydraulic cores: 2 + 1 Wittmann Robot Working hours : 70 000 h
NEGRI BOSSI 480 T
Clamping Force: 480T
reference : 4800 H 3800
Screw diameter: 90 mm
L/D ratio: 20
Maximum material pressure: 1500 bar
Injection volume : 2160 cm3
Injection capacity: 2270 g
Injection speed: 500mm/s
Plastification: 105 g/s
Clearence between tie bars (H x V): 710 x 800
Platen dimensions (H x V): 1190 x 1150
Max mold thickness: 850mm
Minimum mold thickness: 200mm
Ejection stroke: 300mm
Air cores: 2
Hydraulic cores: 2
+ 1 Wittmann Robot
Working hours : 70 000 h
6
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Sandretto injection moulding machine MEGA T 610 T Reference : 4435 - 610 Command : SEF 100 year :1996 Working hours : 47 200 h Screw diameter : 80 mm Volume injectable : 2237 cm3 Injection pressure : 1960 bars Distance between tie bar : 850 x 850 mm Platen dimensions : 1260 x 1260 mm Mould thickness : min : 300 – max : 1000 mm Interface robot 2 core pull 2 air valve
Sandretto injection moulding machine MEGA T 610 T
Reference : 4435 - 610
Command : SEF 100

year :1996
Working hours : 47 200 h
Screw diameter : 80 mm
Volume injectable : 2237 cm3
Injection pressure : 1960 bars
Distance between tie bar : 850 x 850 mm
Platen dimensions : 1260 x 1260 mm
Mould thickness : min : 300 – max : 1000 mm

Interface robot
2 core pull
2 air valve
13
Ultrasonic power: 8,4 kW Component weight max.: 5000 kg Volume: 2000 ltr Heating capacity: 51 kW Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm Space requirement (W x D x H): 12 x 3,2 x 2,1 m Total power: 60 kW Condition: very good mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good

mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
10
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: 50-355 mmBohrtiefe: 4000 mmUmlaufdurchmesser: 1000 mmSpitzenhöhe: 500 mmVollbohren: 18-100 mmHauptspindelbohrung: 163 mmDrehzahl: 56-710 U/minWerkstückgewicht: 6,3/10 tSetzstock: 70-600 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: 50-355 mm
Bohrtiefe: 4000 mm
Umlaufdurchmesser: 1000 mm
Spitzenhöhe: 500 mm
Vollbohren: 18-100 mm
Hauptspindelbohrung: 163 mm
Drehzahl: 56-710 U/min
Werkstückgewicht: 6,3/10 t
Setzstock: 70-600 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
1
VDT Diamond Core Drill Set 11-piece core drill
VDT Diamond Core Drill Set 11-piece core drill
1
5 core drills (38, 52, 91, 117 and 127 mm) all 170mm long2 x short and 2 x long collets (SDS-Plus and hex)Guide drillEjector pinThe set comes in an aluminum case.
5 core drills (38, 52, 91, 117 and 127 mm) all 170mm long
2 x short and 2 x long collets (SDS-Plus and hex)
Guide drill
Ejector pin
The set comes in an aluminum case.
3
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Machine: DEMAG 650T Type: SYSTEM 650/1000-6400 Year: 2009 Command controls: NC5 Number of hours: 54,000 hours Magnetic trays: Yes Number of cores: 4 Robot interface: yes and equipped with a robot Blowguns: 2 Heated zones: 24 Sequential: 8 Retractable column: yes Screw diameter: 95 mm Injection volume: 3367 cm3 Injectable weight: 3360 g Injection pressure: 1895 bar Electric dosing motor: Yes Passage between column: 1000 x 900 mm Tray dimensions: 1450 x 1350 mm Magnetic trays: yes Opening stroke: 930 mm Mold thickness: 450 -950 mm Dimensions: 11000 x 2500 x 2600mm Weight: 25700 + 7800: 33500 kg
Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
3
Souflleuse MOB 20 litres Type: MOB 20 liters Year: 1990 redone in 2000 Passage between column: 425 x 400 mm Minimum thickness: 210 mm Opening stroke: 660 mm Screw diameter: 80 mm – L/D: 25 mm Parison: 14 points 1 core
Souflleuse MOB 20 litres

Type: MOB 20 liters
Year: 1990 redone in 2000
Passage between column: 425 x 400 mm
Minimum thickness: 210 mm
Opening stroke: 660 mm
Screw diameter: 80 mm – L/D: 25 mm
Parison: 14 points
1 core
1
Plastic processing machinesInjection molding machinesPlastic injection molding machines
ARBURG 130 TONS. - Year 2001 - Type : 470 C - 1300 - 675 - Screw diameter : 40 mm - 1 corepuller - Interface robot - In between columns : 470 x 470 mm
ARBURG 130 TONS.

- Year 2001
- Type : 470 C - 1300 - 675
- Screw diameter : 40 mm
- 1 corepuller
- Interface robot
- In between columns : 470 x 470 mm
4
Plastic processing machinesInjection molding machinesPlastic injection molding machines
KRAUSSMAFFEI 200 T - - Type : KM700-200 - Year : 1998 - In between columns : 560 x 560 mm - Screw diameter : 45 mm - Ijnection volume : 305 cm3 - 3 core - Interface robot - Equiped with a peak cons - 1 accumulator - 8 heating zones
KRAUSSMAFFEI 200 T -

- Type : KM700-200
- Year : 1998
- In between columns : 560 x 560 mm
- Screw diameter : 45 mm
- Ijnection volume : 305 cm3
- 3 core
- Interface robot
- Equiped with a peak cons
- 1 accumulator
- 8 heating zones

3
Plastic processing machinesInjection molding machinesPlastic injection molding machines
GENERAL INFORMATIONS Dimensions: 6200 x 2150 x Ht.2400 mm Weight: 13500 kg Engine power: 75 kw - INJECTION UNIT Plasticising capacity: (PS) 682 gr Ration length diameter: 23,7 Injection pressure: 2000 bar Scew diametre: 60 mm - CLOSING UNIT Plates dimensions: 995 x 1050 mm In between columns: 630 x 630 mm Clamping force: 280 TONS COMMENTS workings hours: 37000 Interface robot - 1 core
GENERAL INFORMATIONS

Dimensions: 6200 x 2150 x Ht.2400 mm
Weight: 13500 kg
Engine power: 75 kw

- INJECTION UNIT
Plasticising capacity: (PS) 682 gr
Ration length diameter: 23,7
Injection pressure: 2000 bar
Scew diametre: 60 mm

- CLOSING UNIT
Plates dimensions: 995 x 1050 mm
In between columns: 630 x 630 mm
Clamping force: 280 TONS

COMMENTS
workings hours: 37000
Interface robot - 1 core

Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.

Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !

Sign up now for free