4
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
4
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
7
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
4
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
4
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
4
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
8
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
4
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
3
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
5
Food machinesPackaging machinery
Stainless manual tray sealer, twin tray operation, temperature and timer controls, tray dimensions 160mm x 165mm, 1Ph
Stainless manual tray sealer, twin tray operation, temperature and timer controls, tray dimensions 160mm x 165mm, 1Ph
10
Food machinesPackaging machinery
Stainless flow wrapper, dual jaw operation, jaw width 180mm, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, dual film reel holder with automatic film reel splicing, this Ilapak has been running on Printed Film and has ability for PEC, has the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas "
Stainless flow wrapper, dual jaw operation, jaw width 180mm, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, dual film reel holder with automatic film reel splicing, this Ilapak has been running on Printed Film and has ability for PEC, has the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas "
2
Food machinesOther
stainless conveyor, belt dimensions 400mm x 150mm, 3Ph
stainless conveyor, belt dimensions 400mm x 150mm, 3Ph
3
Food machinesPackaging machinery
stainless heavy duty bag sealer, 650mm sealing bar, adjustable weld & cooling temp,
stainless heavy duty bag sealer, 650mm sealing bar, adjustable weld & cooling temp,
3
Food machinesOther
45 degree driven roller conveyor, 450mm roller width,
45 degree driven roller conveyor, 450mm roller width,
6
Food machinesBakery-, pastry equipmentMixers
Stainless 80L working capacity ploughshare mixer, botom central discharge, inspection door,
Stainless 80L working capacity ploughshare mixer, botom central discharge, inspection door,
9
Food machinesBakery-, pastry equipmentMixers
200 L Stainless vessel, 2 top mounted paddle stirrers, vessel 45 degree sloped base to outlet
200 L Stainless vessel, 2 top mounted paddle stirrers, vessel 45 degree sloped base to outlet
4
Printing machineryPost press machinesLaminating machines
Workingwidth 1500 mm
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
Workingwidth 1500 mm
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
1
Generators and MotorsAccessories and spare parts
Diesel pump set with counter, filling and suction hose, automatic shut-off gun
Diesel pump set with counter, filling and suction hose, automatic shut-off gun
1
Agricultural machineryTires, rims and axles
Digital readout for easy reading of the set speed or spindle stroke
Smooth running through cast steel pulleysQuality ball bearings ensure high accuracy
<div>Oversized drilling table with T-grooves and coolant chutes
<div>Drilling table swivels (45o), height adjustment via rack</div>
<div>Powerful aluminum motor according to IP54</div>
<div>Accurate keyless chuck supplied as standard</div>
<div>Standard with T-grooves in the ground bottom plate</div>
<div>Ergonomic handles for comfortable working</div>
<div>Keyless chuck 1 - 16 mm /B 18</div>
<div>Drill chuck pin MK 2 / B 18</div>
<div>Right and left rotation switch</div>
<div>Digital drilling depth readout</div>
<div>Digital speed readout</div>
<div>Cross line laser device</div>
<div>Height-adjustable protective cover</div>
Digital readout for easy reading of the set speed or spindle stroke
Smooth running through cast steel pulleysQuality ball bearings ensure high accuracy
<div>Oversized drilling table with T-grooves and coolant chutes
<div>Drilling table swivels (45o), height adjustment via rack</div>
<div>Powerful aluminum motor according to IP54</div>
<div>Accurate keyless chuck supplied as standard</div>
<div>Standard with T-grooves in the ground bottom plate</div>
<div>Ergonomic handles for comfortable working</div>
<div>Keyless chuck 1 - 16 mm /B 18</div>
<div>Drill chuck pin MK 2 / B 18</div>
<div>Right and left rotation switch</div>
<div>Digital drilling depth readout</div>
<div>Digital speed readout</div>
<div>Cross line laser device</div>
<div>Height-adjustable protective cover</div>
Smooth running through cast steel pulleysQuality ball bearings ensure high accuracy
<div>Oversized drilling table with T-grooves and coolant chutes
<div>Drilling table swivels (45o), height adjustment via rack</div>
<div>Powerful aluminum motor according to IP54</div>
<div>Accurate keyless chuck supplied as standard</div>
<div>Standard with T-grooves in the ground bottom plate</div>
<div>Ergonomic handles for comfortable working</div>
<div>Keyless chuck 1 - 16 mm /B 18</div>
<div>Drill chuck pin MK 2 / B 18</div>
<div>Right and left rotation switch</div>
<div>Digital drilling depth readout</div>
<div>Digital speed readout</div>
<div>Cross line laser device</div>
<div>Height-adjustable protective cover</div>
1
Construction machineryAccessories and spare parts
12 drawers, 10 of which are filled with tools
100 cm working height, 105 cm wide with wooden worktop.
new in box
12 drawers, 10 of which are filled with tools
100 cm working height, 105 cm wide with wooden worktop.
new in box
100 cm working height, 105 cm wide with wooden worktop.
new in box
3
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
_thumb.jpg "Show advert")
4
Compressed-air technologyCompressors
Hz : 50
Brand : Hydrovane
Series : Série HV
Description : Hydrovane Hypac (Série HV)
Compressed air gas
Minimum pressure (Bar g) : 6
Min/Max pressure (Bar g) : 8 à 10
Engine power (kW) : 11
Noise level (DB) : 69
Lenght (millimètres) : 825
Width (millimètre) : 1135
Size (millimètres) : 1390
air exits (fingers) : 0.75
Weight (kilograms) : 412
Speed (T/MN) : 1450
Oil capacity (l) : 7
Cooling system : with air
Cleaned air (mg/m3) : <1
Air production = 1.74 m3/mins
Speed (rpm): 1450
Use pressure: 10 Bar g,
Air production = 1.5 m3/mins
Working hours : 32 385 hours
230v - 1 - 50 HZ - PE
Very good condition
Hz : 50
Brand : Hydrovane
Series : Série HV
Description : Hydrovane Hypac (Série HV)
Compressed air gas
Minimum pressure (Bar g) : 6
Min/Max pressure (Bar g) : 8 à 10
Engine power (kW) : 11
Noise level (DB) : 69
Lenght (millimètres) : 825
Width (millimètre) : 1135
Size (millimètres) : 1390
air exits (fingers) : 0.75
Weight (kilograms) : 412
Speed (T/MN) : 1450
Oil capacity (l) : 7
Cooling system : with air
Cleaned air (mg/m3) : <1
Air production = 1.74 m3/mins
Speed (rpm): 1450
Use pressure: 10 Bar g,
Air production = 1.5 m3/mins
Working hours : 32 385 hours
230v - 1 - 50 HZ - PE
Very good condition
Brand : Hydrovane
Series : Série HV
Description : Hydrovane Hypac (Série HV)
Compressed air gas
Minimum pressure (Bar g) : 6
Min/Max pressure (Bar g) : 8 à 10
Engine power (kW) : 11
Noise level (DB) : 69
Lenght (millimètres) : 825
Width (millimètre) : 1135
Size (millimètres) : 1390
air exits (fingers) : 0.75
Weight (kilograms) : 412
Speed (T/MN) : 1450
Oil capacity (l) : 7
Cooling system : with air
Cleaned air (mg/m3) : <1
Air production = 1.74 m3/mins
Speed (rpm): 1450
Use pressure: 10 Bar g,
Air production = 1.5 m3/mins
Working hours : 32 385 hours
230v - 1 - 50 HZ - PE
Very good condition
4
Plastic processing machinesInjection molding machinesPlastic injection molding machines
In working conditions
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
In working conditions
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
_thumb.jpg "Show advert")
5
Plastic processing machinesInjection molding machinesPlastic injection molding machines
-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808
-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808
5
Printing machineryCutting machines
Polar LW 1000-4 paper stack lift
Year: 1998
Capacity : 1000 kg
Max pallet size: Pallet size 1200 × 800
Power supply: 380V
Automatic lifting cycle controlled by photocell or manual mode, fast work.
Polar LW 1000-4 paper stack lift
Year: 1998
Capacity : 1000 kg
Max pallet size: Pallet size 1200 × 800
Power supply: 380V
Automatic lifting cycle controlled by photocell or manual mode, fast work.
Year: 1998
Capacity : 1000 kg
Max pallet size: Pallet size 1200 × 800
Power supply: 380V
Automatic lifting cycle controlled by photocell or manual mode, fast work.
6
Printing machineryRotary printing press
Mueller Martini Concept
Year: 1996
Unwind 50 Inch
Printing Units 4 x 24 inch
and 4 x 25 inc
Unigraphica stacker
and a sheeter 2088 for DinA4 or possible to lengthen A3 or A2
There is also a unit available where placemats were printed in the past.
Mueller Martini Concept
Year: 1996
Unwind 50 Inch
Printing Units 4 x 24 inch
and 4 x 25 inc
Unigraphica stacker
and a sheeter 2088 for DinA4 or possible to lengthen A3 or A2
There is also a unit available where placemats were printed in the past.
Year: 1996
Unwind 50 Inch
Printing Units 4 x 24 inch
and 4 x 25 inc
Unigraphica stacker
and a sheeter 2088 for DinA4 or possible to lengthen A3 or A2
There is also a unit available where placemats were printed in the past.
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
8
Textile processing and fabricationFinishing machines
ETF Carpet sample finishing machine.
4 side trimming with dust removal
complete with stacker
ETF Carpet sample finishing machine.
4 side trimming with dust removal
complete with stacker
4 side trimming with dust removal
complete with stacker
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
-6_thumb.jpg "Show advert")
-7_thumb.jpg "Show advert")
-8_thumb.jpg "Show advert")
8
Packaging machineryFilm shrinking machines
Minipack Torre RP 55
MANUAL HEAT-SHRINK - SEALING BAR 540X390 MM
Available dimensions of the sealing bars: 540x390 mm
MAX product size: 500x380x200 mm
Maximum reel dimensions: (Ø x length) Ø250x600 mm
Work Surface Height: 925 mm
Machine dimensions: (open hood) 1260x810x1310 mm
Machine dimensions: (closed hood) 1260x810x1165 mm
Weight: 126 kg
Minipack Torre RP 55
MANUAL HEAT-SHRINK - SEALING BAR 540X390 MM
Available dimensions of the sealing bars: 540x390 mm
MAX product size: 500x380x200 mm
Maximum reel dimensions: (Ø x length) Ø250x600 mm
Work Surface Height: 925 mm
Machine dimensions: (open hood) 1260x810x1310 mm
Machine dimensions: (closed hood) 1260x810x1165 mm
Weight: 126 kg
MANUAL HEAT-SHRINK - SEALING BAR 540X390 MM
Available dimensions of the sealing bars: 540x390 mm
MAX product size: 500x380x200 mm
Maximum reel dimensions: (Ø x length) Ø250x600 mm
Work Surface Height: 925 mm
Machine dimensions: (open hood) 1260x810x1310 mm
Machine dimensions: (closed hood) 1260x810x1165 mm
Weight: 126 kg