Werkzeugmaße max.: . 0
Tragkraft: . t
Abmessung L-B-H: . mm

Lagernummer: 1077-Z01249
Maschinenart: Ersatzteile
Fabrikat: ZIEHL-ABEGG
Typ: Transformator
Baujahr: unbekannt
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage

Ref. no.: 18657
Hersteller: ENGEL
Year of construction: 2016

Clamping unit
Clamping force: 160 ton
Opening stroke: 900 mm
Mould height min.: 300 mm
Mould height max.: 600 mm
Platen size (h x v): 750 X 750 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 151 g
Injection pressure: 2400 bar

Measurements and weight
Dimensions: 5,7 X 1,8 X 2,2 m
Machine weight: 10200 kg

Further information:
Tie-bar-less + electric injection = maximum flexibility and precision

ENGEL e-victory 440/160:

👉 This is a hybrid machine (servo-hydraulic + electric)

⸻

🔍 How it works

✔ Electric part:

* Injection unit (screw movement)
* Ensures very high precision and process stability

✔ Hydraulic part:

* Clamping unit (mould closing)
* Maintains clamping force efficiently without continuous energy consumption

👉 This system combines:

* The precision of an all-electric machine
* With the power and efficiency of a hydraulic system

This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design.

The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing.

Key features:

* Tie-bar-less design for maximum mould flexibility
* Servo-hydraulic drive for high energy efficiency
* Precise and stable processing performance
* Compact footprint with a large mould installation area
* Modern ENGEL control system

The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures.

Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.

Ref. no.: 18597
Hersteller: ENGEL
Year of construction: 2007

Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar

Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg

Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.

One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.

Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.

The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.

The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.

The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.

The ENGEL INSERT series is particularly suitable for:

* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products

With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Punching power: 130 ton
Throat depth: 600 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 50x18 mm
Stroke: 80 mm
Flat steel: 600x18 (max. 600x20 mit Deformation) mm
Angle steel: 120x120x11 (max. 150x150x15 mit Deformation) mm
Round / square steel: 45/40 mm
Notcher: 130x12 mm
Bending unit: 250x12 mm
Motor: 15 kW

Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008

Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 4,6 x 1,6 x 2,1 m
Machine weight: 4850 kg

Additional information & extras
Core pull: 1 pcs

Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).

he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.

The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards.

Key advantages of this series include:

* Robust and durable construction
* High process stability and repeatability
* Reliable ARBURG control system
* Good availability of spare parts
* Suitable for continuous industrial operation

The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market.

Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Ref. no.: 18591
Hersteller: ARBURG
Year of construction: 2005

Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar

Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.

These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.

Typical features of this series include:

* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements

The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.

ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013

Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar

Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg

Additional information & extras
Core pull: 1 pcs

Further information:
ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine
For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production.

Key Advantages:
Tie-barless design → maximum mould accessibility
SPEX special configuration → optimized for specific applications
High precision & repeatability
Energy-efficient operation
Compact design → space-saving
Automation-ready (robot interface possible)
Applications:
Automotive industry
Electronics
Medical parts
Technical plastic components

👉 Machine in good working condition. Inspection possible upon request.

Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007

Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm

Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg

Further information:
BATTENFELD EM 30/55 UNILOG B6
All-Electric Precision Injection Moulding Machine

The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.

The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:

* very low energy consumption
* high repeatability and precision
* quiet machine operation
* low maintenance requirements

The machine is especially suitable for:

* technical plastic parts
* medical products
* electronic components
* small precision parts

Thanks to its all-electric drive technology, the machine offers:

* significantly lower energy consumption compared to hydraulic machines
* clean production environment
* stable cycle times
* precise dosing and excellent process stability

The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.

With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.

The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.

Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001

Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 441 cm³
Shot weight: 395 g
Injection pressure: 2268 bar

Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg

Further information:
FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production

The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.

One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.

The K-TEC series is especially preferred for:

• Thin-wall packaging products
• Technical parts with fine surface details
• Lid and container production
• High-flow applications
• High-speed serial production processes

Advantages of the nitrogen-supported system:

• Extremely fast injection performance
• More stable pressure control
• Better reproduction of fine details
• Improved filling of thin-wall products
• Shorter cycle times
• High process stability

The K-TEC series is also known for:

• High repeatability
• Sensitive mould protection
• Low cycle times
• Long-lasting mechanical construction
• Suitability for heavy industrial operating conditions

The machine was actively running in production until it was removed from operation and was working without problems until the very end.

Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011

Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar

Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg

Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability

his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.

With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.

Key features:

* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts

The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.

Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.

The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Bruton BIG T Dough divider, Stainless, screw fed, with guillotine, variable speed, belt is 1200mm x 200mm, blade width 130mm, Production Rate Examples:, 2oz (56gms), Single Formation, Up to 1,800 per hour, Twin Formation, Up to 3,600 per hour, 4oz (113gms), Single Formation, Up to 1,800 per hour, Twin Formation, Up to 3,600 per hour, 11b (256gms), Single Formation, Up to 1,200 per hour, 8in (203mm), Quiche, Up to 1,200 per hour. Mobile, 3Ph

Bruton BIG T Dough divider, Stainless, screw fed, with guillotine, variable speed, belt is 1200mm x 200mm, blade width 130mm, Production Rate Examples:, 2oz (56gms), Single Formation, Up to 1,800 per hour, Twin Formation, Up to 3,600 per hour, 4oz (113gms), Single Formation, Up to 1,800 per hour, Twin Formation, Up to 3,600 per hour, 11b (256gms), Single Formation, Up to 1,200 per hour, 8in (203mm), Quiche, Up to 1,200 per hour, mobile, 3Ph

Renz Super 700 Wiro Punching Machine – Heavy-Duty Punching for Wire Binding

The Renz Super 700 is a robust, high-capacity punching machine designed for demanding production environments. Built for precision and durability, this semi-automatic wire punching system is ideal for professional print shops, bookbinding operations, and finishing departments.

Key Features:

Heavy-duty construction – Built to handle high-volume workloads with ease.

Interchangeable punching dies – Quickly switch between different punch patterns for maximum flexibility.

Punching width up to 700 mm – Suitable for a wide range of formats, including oversized documents.

Foot pedal operation – For hands-free control and improved workflow efficiency.
Clean and precise punching – Delivers consistent results across paper, cardboard, and plastic sheets.
Whether you're producing calendars, notebooks, or presentation materials, the Renz Super 700 offers speed, reliability, and excellent punching quality for wire binding applications.

Condition: Used, in excellent working condition
Available immediately – Contact us for pricing, shipping options, or to schedule a demo

Cauhe VA (1450 x 1850 mm) Die Cutter / Cauhe VA Heavy-Duty Large Format Die Cutter

Very neat machine, rarely used.

Max format: (1450 x 1850 mm)
Model: VA
Year: 2008

Available immediately!

Knorr ABS-145-6-R Unloader

Max format: 145 cm
Year 1997
Right side unloader.

Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008

Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm

Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar

Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m

Formatic R2200 Forming machine, Stainless forming machine, up to 2200 burgers per hour, variable speed controls, 15L hopper capacity, with various size forming drums and spares, 1Ph

Theisen en Bonitz Sprint B312 VP ( 2008)

Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm

Complete with QSM 304 stitching - folding- 3 side trimming unit
Equiped with hohner stithing heads
Loops stitching heads available

In mint condition !

Theisen en Bonitz Sprint B312 VP ( 2008)

Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm

with Theisen en Bonitz 304 QSM

Theisen & Bonitz 304 QSM

Stitching and folding device:
– Motorized format setting
– 2 Hohner stitching heads
– Friction free Knife Fold (cloth system)
– Automatic layer thickness adjustment
– Front cutting device for cutting to 4 cm,
sections greater than 1.5 cm
– Head and foot trimming each from 3 to 20 mm at about 80 pages,
80 g / sqm.
– Power: 400 V, 50 Hz

Cauhe II

MODEL II
Format cm. 82x112
Pressure Tm/dm2 2,5
Net weight Kg. 4400
Motor Power Kw 4

Cauhe II

Year 2004
Format: 82x112 cm
Weight 4400 kg
Heated Plate

Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar

Measurements and weight
Machine weight: 13500 kg

Robot
Producer: Wittman
Type: W743
Year: 2009

Further information:
ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology

The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility.

Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system.

⸻

🔍 Advantages of the ENGEL Victory Series

✔ Tie-Bar-Less Design

The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction.

This system offers several important advantages:

• Larger moulds can be installed easily
• Easier access for complex mould geometries
• Reduced mould changeover times
• Easier robot integration
• More efficient use of production space

This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications.

⸻

✔ Wittmann Robot Integration

The machine has been operated together with a Wittmann robot.

Robot specifications:

• Wittmann W743-0424
• Year of manufacture: 2009
• Payload capacity: 25 kg
• X-axis: 1200 mm
• Y-axis: 1600 mm
• Z-axis: 4000 mm

This configuration provides major advantages for automated production processes.

⸻

🔍 Machine Operating System

The ENGEL Victory Tech series operates with a servo-hydraulic system.

✔ Hydraulic System:

• Clamping unit
• Injection movements
• Ejector system
• Mould movements

are driven by a high-performance hydraulic system.

✔ Thanks to the servo-controlled hydraulic system:

• Only the required amount of energy is consumed
• Power consumption is significantly reduced
• Quieter operation is achieved
• Production stability is improved

Unlike older conventional hydraulic machines, the machine does not run continuously at full power.

The servo pump system operates only when needed, providing the following advantages:

• Lower energy costs
• Reduced heat generation
• Longer component lifetime
• More stable processing conditions

Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005

Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm

Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar

Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg

Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine

The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.

All major machine movements are driven by modern servo motors, providing:

* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance

The machine is especially suitable for:

* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs

Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.

Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:

* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management

The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:

* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit

The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Stainless, ideal for sealing sandwich wedges of all sizes into plastic trays, up to 60 products per min, variable speed, adjustable temp controls, currently set for 165mm x 66mm skillet, 2200mm overall length, mobile, 1Ph

Stainless flow wrapper, dual jaw operation, jaw width 180mm, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, dual film reel holder with automatic film reel splicing, this Ilapak has been running on Printed Film and has ability for PEC, has the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas "

Lot 277 Velati twin shaft paddle mixer and tote bin hoist Model: Mixer300 Stainless, mobile, guarded top, 300L twin shaft paddle mixer with Syspal tote bin hoist, hoists up to 1700mm to tip into mixer. See video at: http://www.youtube.com/watch?v=LFwPoTgTm5Q For more informatin contact +44 (0) 7894515741

Theisen en Bonitz Sprint HP 320

20 stations High pile collating machine
Complete with pumps

Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm

Perfecta/ Knorr ABS 106 -3 R Destacker right

With rear shield

Built in 1994

Maximum format: 75 x 104 cm
Maximum stack height in one go: 16.5 cm
Stack height of pile max: 106 cm

Polar RAB 4 jogger
Year 1998
Automatic flap left and right
Max paper format: up to 75 x 105 cm

Air pressing roller

Perfecta/ Knorr ABS 106 -3 R Destacker right

With rear shield

Built in 1994

– Maximum format 75 x 104 cm
– Maximum stack height in one go: 16.5 cm
– Stack height max: 106 cm

Sandt 150 ton die cutting machine

– Max format 1.53 x 1.1 meter
– Updated to modern safety standards