Unitech Boot wash station, Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph

Leit & Zugspindeldrehmaschine EXCELLO - DLZ 500 SL

-Spitzenhöhe 250mm
-Drehdurchmesser über Bett 500mm
-Drehdurchmesser über Support 310mm
-Spitzenweite 3000mm
-Stangendurchlass 65mm
-Drehzahlen 28-1400 U/min
-Automatische Längs / Planvorschübe
-Dreibackenfutter 250mm
-Vierbackenfutter 250mm
-Multifixgrundhalter mit Einsätzen
-Lünette
-Werkzeugschrank
-Dokumentation

Abmaße:
LxBxH 5,5x1,4x1,6 Meter / Gewicht 3500Kg

Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg

Gillardon GB16 Säulenbohrmaschine

-Bohrleistung 22mm
-Werkzeugaufnahme auf MK 3 Adaptiert
-Pinolenhub 120mm
-Ständer-Ausladung 250mm
-Abstand Spindel-Tisch (min./max.) 30/380mm
-Spindeldrehzahlen 400-2500 U/min
-Leistung 0,37 kW
-Bohrfutter

Abmaße:
LxBxH 0,7x0,7x1,8 Meter / Gewicht 400Kg

Gillardon GB16 Säulenbohrmaschine

-Bohrleistung 22mm
-Werkzeugaufnahme auf MK 3 Adaptiert
-Pinolenhub 120mm
-Ständer-Ausladung 250mm
-Abstand Spindel-Tisch (min./max.) 30/380mm
-Spindeldrehzahlen 400-2500 U/min
-Leistung 0,37 kW

Abmaße:
LxBxH 0,7x0,7x1,8 Meter / Gewicht 400Kg

LNS PB 80 / Stangen Anfasmaschine / Anspitzmaschine

-CE-Kennung
-Anfasdurchmesser - 30 Grad 8-80mm
-Anfasdurchmesser - 45 Grad 8-60mm
-Drehdurchmesser 10-60mm
-Max Drehlänge 40mm
-2xGeschwindigkeiten
-Leistung 0,0-1,65 KW
-Dreibackenfutter
-Verstellbare Materialauflage
-Dokumentation

Abmaße:
LxBxH 1x0,7x1,6 Meter / Gewicht 400 Kg

Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg

Shaft diameter: 30
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg

Anschlußdurchmesser: . mm
Saugleistung: 6.500 m³/h
Unterdruck: max. ca. 3.400 pa
Filterfläche: 80 m²
Anschluß: 400 V
Frequenz: 50 Hz
Antrieb: 5,5 kW
Luftmenge: max. ca. 8.100 m³/h
Abmessungen: ca. 1400x800x2910 BxTxH mm

Aufnahme: SK50
Gewicht: . kg
Material: .

Spindeldurchmesser: 125 mm
x-Weg: 2000 mm
y-Weg: 1100 mm
z-Weg: SK 50 mm
Spindelaufnahme: Philips 2500
Digitalanzeige: Pfillips
Drehzahl: 925 U/min
Spindelhub: 800 mm
Tisch: 1000x1400 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011

Clamping unit
Clamping force: 180 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Opening width: 1050 mm
Platen size (h x v): 790 x 740 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar

Measurements and weight
Dimensions: 6,10 x 1,90 x 2,10 m
Machine weight: 8400 kg

Robot
Producer: Krauss Maffei
Type: LRX-100
Year: 2012

FG Wilson P500 Diesel generator set, 2000, 500KVA, 400Kw, Stamford alternator, powered by Perkins diesel engine, contained in a shipping container, with manuals

pressing capacity: 100 to
Stroke: 600 mm
Table: 900 x 500 mm
Daylight: 800 mm
Throat depth: 400 mm
Rapid speed: 220 mm/s
Working speed: 1 - 20 mm/s
Retraction speed: 250 mm/s
Motor: 14 kW
Working pressure: 30 - 239 bar
Length: 1900 mm
Width: 1700 mm
Height: 4400 mm
Weight: 6000 kg

x-Weg: . mm
y-Weg: . mm
z-Weg: . mm
Schnittlänge: 100 mm
Arbeitsbereich: 2000x4000 mm
Pumpe: mit Pumpe kW

Spindeldurchmesser: 130 mm
x-Weg: 6000 mm
y-Weg: 2500 mm
z-Weg: 800 mm
w-Weg: 600 mm
Eilgang: 10 m/min
Spindeldrehzahl:: 1600 UPM
Späneförderer: vorne
Steuerung: Seit 1998 Heidenhain
Plattenfeld: 6000x4000 mm
Antriebsleistung: 45 kW

Drehdurchmesser: . mm
Drehlänge: 1500 mm
Steuerung: Fagor
Nummer:: 081116391
Durchmesser: 400 mm
Revolver: 8
maschine.: CNC Zyklendrehmaschine

Cutting length: 1530 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 12 mm
Strokes: 7 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 22.5 kW
Oiltank: 250 l
Table height: 950 mm
Length: 2350 mm
Width: 1400 mm
Height: 2000 mm
Weight: 5200 kg

NNP Stainless conveyor, Stainless, variable speed, belt dimensions 4000mm x 480mm, 1ph

pressing capacity: 60 to
Tonnage rating point: 3.5 mm
Table length: 500 mm
Table width: 700 mm
Hole in table: 190 mm
Stroke: 1 - 100 mm
Strokes: 65 1/min
Ram guides: 4
Ram adjustment: 70 mm
Ram hole: 45 mm
Throat depth: 260 mm
Daylight: 365 mm
Motor: 5 kW
Length: 1250 mm
Width: 1350 mm
Height: 2400 mm
Weight: 3500 kg

Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. coil width for version with pneumatic downholder: 80 mm

Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1450 mm
Width: 1200 mm
Height: 1640 mm
Weight: 260 kg

Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.55 kW
Length: 1400 mm
Width: 1200 mm
Height: 1550 mm
Weight: 190 kg

Cintex CS4000 Metal detector checkweigher, Stainless, combination metal detector checkweigher, belt dimensions 2100mm x 150mm, aperture 220mm x 100mm, weigh platform 350mm x 150mm, weight range 20g to 1Kg, pneumatic blow reject into reject bins, with spare belts, 1Ph

Cretors flothru FTCC12 Screw coater, Serial: 17031051 2017, stainless screw coater, screw length 3200mm, screw width 300mm, screw sits in jacketed vessel, previously used in caramel popcorn line, 3Ph

Cretors flothru FTLK25 Cooking kettle, Serial: 17031053, 2017, Stainless kettle, 150L capacity, Top mounted SPX Mixer, with Chromalox immersion heater, bottom mounted Leeson motor, previously used with a caramel popcorn line, 3Ph

Hitachi RX2-SD160W ink jet printer, 2007, Stainless inkjet printer, touch screen control, with Pavan roller conveyor 1000mm x 170mm, 1Ph

Polar Systems Flavour applicator Cooking kettle, Serial: 6379H9, 2017, Stainless, electrically heated cooking kettle, top mounted motor with mixing arm, adjustable temperature controls, with Verderflex Vantage peristaltic tube pump, mobile, 3Ph

Soco T10 Case taper, Serial: 17395T10, 2017, Top and bottom case taper, side grip belts, max box with 500mm, max box height 550mm, 3Ph

NNP Stainless conveyor Stainless, belt dimensions 1000mm x 250mm, side guides, 3Ph

Reiser GK512B Vacuum chamber packaging line, 2017, Stainless vaccum chamber packaging line, comsisting of Supervac GK Vacuum chamber, Supervac AT hot water shrink tank and Supervac BL15 Drying tunnel, also comes with Supervac BG450 bag opener, 3Ph

Line Equipment LE360DP VFFS bagger, Serial: 606930, Stainless, Vertical form fill and seal bagging machine, HMI touch screen controls, with Zodiac ice printer, jaw width 380mm, suitable for resealable grip seal bags, with five forming sets and spare jaw set, 3Ph

Fortress Stealth Metal detector checkweigher ER3300, 2015, stainless, combination metal detector checkweigher, weighs from 10g to 10Kg, weigh platform 400mm x 250mm, metal detector aperture 440mm x 150mm, with pneumatic reject into reject bins, overall length 2750mm

pressing capacity: 120 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R-axis
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
rapid speed Y-axis: 120 mm/s
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg

Working area: 3020 x 1520 mm
Plasma source: Kjellberg Smart Focus 300
Max. thickness - mild steel: 80 mm
Max. piercing thickness - mild steel: 40 mm
Recommended thickness (unalloyed steel):: 60 mm
Current: 300 A
Current / power-on time: 100 % A
Positioning speed: 24 m/min
Repeat accuracy: < 1/10 mm
Max. weight on table: 400 kg/m²

Wraps A700S Shrink sleeve wrapper, A700S shrink wrapper, sleeve wrapper machine, sealing bar 750mm width, max product 600mm x 400mm, ideal for trays, bottles, cans, food, drinks, toiletries and more, mobile, 3Ph

x-Weg: 1050 mm
y-Weg: 650 mm
z-Weg: 400 mm
Tischfläche: 1200x350 mm
Drehzahl: U/min
Bohrspindel: mm/min

Drehdurchmesser über Bett: 1800 mm
Drehdurchmesser über Support: 1450 mm
Drehlänge: 940 mm
Bettbreite: 1040 mm
Drehzahl: 2,35-118 U/min
Planscheiben Durchmesser: 1400 mm
Drehdurchmesser in der Kröpfung: 2450 mm
Verfahrweg: 1200 mm
Gewicht: 26 t

BHL flighted elevator conveyor, 2021, Stainless, flighted elevator conveyor, elevated from 500mm and discharges at 2400mm, belt width 350mm, mobile, 3Ph

Swing over bed: 600 mm
Distance between centers: 2000 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Spindle speed steps: 21
Spindle revs: 20 - 2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: 60 - 1/4 Tpi
Module thread range: 0.125 - 30
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3600 mm
Width: 1250 mm
Height: 1400 mm
Weight: 3110 kg

Saw blade diameter: 315 mm
Saw blade dimensions: 315x32x63 mm
Saw blade speed: 45 / 90 rpm
Cutting capacity 0°: rund 105 mm / quadratisch 85 x 85 / rechteckig 120 x 60
Cutting capacity 45° right: rund 90 mm / quadratisch 80 x 80 / rechteckig 90 x 60
Motor: 1,3 / 1,8 kW
Width: 600 mm
Depth: 1000 mm
Height: 1400 mm
Weight: 200 kg

Saw blade diameter: 315 mm
Saw blade dimensions: 315x32x63 mm
Saw blade speed: 45 / 90 rpm
Mitre left: 45 °
Mitre right: 45 °
Cutting capacity 0°: rund 105 mm / quadratisch 85 x 85 / rechteckig 120 x 60
Cutting capacity 45° right: rund 90 mm / quadratisch 80 x 80 / rechteckig 90 x 60
Cutting capacity 45° left: rund 90 mm / quadratisch 80 x 80 / rechteckig 90 x 60
Motor: 1,3 / 1,8 kW
Width: 600 mm
Depth: 1000 mm
Height: 1400 mm
Weight: 200 kg

pressing capacity: 100 to
Stroke: 400 mm
Table: 800 x 500 mm mm
Daylight: 500 mm
Rapid speed: 110 mm/s
Working speed: 10 mm/s
Retraction speed: 160 mm/s
Motor: 11 kW
Working pressure: 250 bar
Length: 1900 mm
Width: 1700 mm
Height: 2930 mm
Weight: 5500 kg

Saw blade diameter: 350 mm
Saw blade dimensions: 350x32x63 mm
Saw blade speed: 45 / 80 rpm
Mitre left: 45 °
Mitre right: 45 °
Cutting capacity 0°: round 115 mm / square 100 x 100 / rectangular 120 x 80
Cutting capacity 45° right: round 110 mm / square 90 x 90 / rectangular 90 x 90
Cutting capacity 45° left: round 110 mm / square 90 x 90 / rectangular 90 x 90
Motor: 1,8 / 2,2 kW
Width: 1100 mm
Depth: 1000 mm
Height: 1400 mm
Weight: 300 kg

Max. Blechstärke - Baustahl: 3.5 mm
Ausladung: 750 mm
Motor: 2 kW
Geschwindigkeit: 6 m/min
Rondendurchmesser min/max: 200/1200 mm
Länge: 2000 mm
Breite: 600 mm
Höhe: 1400 mm
Gewicht: 750 kg

Max. sheet thickness - mild steel: 5 mm
Max. blank diameter: 2000 mm
Min. blank diameter: 250 mm
Motor: 2,2+0,75 kW
Length: 3000 mm
Width: 750 mm
Height: 1400 mm
Weight: 1350 kg

Sheet Thickness - mild steel: 0.4 - 2 mm
Max. sheet width: 400 mm
Max. cross-section: 300 mm
Feed roll diameter: 63 mm
Feeding speed: 150 m/min
Feeding acceleration: 10 m/s²

UWE AFS60 platform scale, Serial: AFSA1500, 60kg max, 400g minimum, at 20g intervals

Arbeitsbreite: 6 m
Walzendurchmesser: 65 cm
Scheibendurchmesser: 42 cm

Arbeitsbreite: 3 m
Reihenzahl: 4 0
Reihenabstand: 75 cm
Gewicht: 780 kg