pressing capacity: 30 to
Cylinder fix or moveable: fix
Stroke: 775 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 2015 mm
Weight: 400 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1500 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 680 mm
Rapid speed: 10 mm/s
Working speed: 5 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg

Flexion modulus: 10 cm³
Round tube: 64 x 3 mm
Standard steel tube: 64 x 3,3 mm
Gas tube: 2" x 40 mm
Stainless steel: 60 x 2 mm
Hard copper and aluminium: 64 x 4 mm
Square tube: 60 x 60 x 4 mm
Rect. tube easy way: 40 x 60 x 4 bzw. Ø 60 x 40 x 3 mm
Rect. tube hard way: 60 x 40 x 3 mm
Max. outer diameter: 64 mm
Max. bending radius: 200 mm
Min. bending radius: 20 mm
Max. bending angle: 210 °
Motor: 4.2 kW
Hydraulic oil capacity: 50 l
Length: 4000 mm
Width: 950 mm
Height: 1250 mm
Weight: 850 kg

Flexion modulus: 170 cm³
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg

Flexion modulus: 80 cm³
Standard steel tube: 127 x 7,1 mm
Gas tube: 4" x 8,56 mm
Furniture tube: 127 x 7,1 mm
FE35 (for hydraulic tubes): 100 x 11 mm
Stainless steel AISI304-318: 114,3 x 5,6 mm
Stainless steel AISI308 (food industry): 114,3 x 5,6 mm
Brass soft: 139,7 x 8,8 mm
Hard copper and aluminium: 139,7 x 8,8 mm
Soft copper: 139,7 x 8,8 mm
Conduit tube (TAZ): 120 x 9 mm
Mepla, Gebereit and similar: 120 x 6.5 mm
Roundbar solid (S275JO): 90 mm
Squarebar solid (S275JO): 75 x 75 mm
Flatsteel solid (S275JO): 100 x 50 mm
Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm
T-profile (S275JO): 100 x 100 x 10 mm
U-profile (S275JO): 100 x 100 x 10 mm
Max. bending radius: 700 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 0,75 r/min
Motor: 3.5 kW
Length: 850 mm
Width: 1200 mm
Height: 850 mm
Weight: 720 kg

Flexion modulus: 43 cm³
Standard steel tube: 100 x 6 mm
Gas tube: 3" 1/2 x 5,74 mm
Furniture tube: 100 x 6 mm
FE35 (for hydraulic tubes): 100 x 7,5 mm
Stainless steel AISI304-318: 100 x 3,6 mm
Stainless steel AISI308 (food industry): 100 x 3,6 mm
Brass soft: 114.3 x 6,3 mm
Hard copper and aluminium: 114,3 x 6,3 mm
Soft copper: 114,3 x 6,3 mm
Conduit tube (TAZ): 100 x 6 mm
Mepla, Gebereit and similar: 100 x 5 mm
Roundbar solid (S275JO): 70 mm
Squarebar solid (S275JO): 60 x 60 mm
Flatsteel solid (S275JO): 80 x 40 mm
Square profile (S275JO): 100 x 60 x 4 bzw. 90 x 90 x 4 mm
T-profile (S275JO): 90 x 90 x 6 mm
U-profile (S275JO): 90 x 90 x 6 mm
Max. bending radius: 400 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 1,3 r/min
Motor: 3.5 kW
Length: 500 mm
Width: 1200 mm
Height: 850 mm
Weight: 480 kg

Flexion modulus: 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1.5 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg

Shaft diameter: 100
Rolls diameter: 315 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 7 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 800 mm, 30x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Square bar (section / min. diameter): 60x60 mm / 750 mm, 15x15 mm / 400 mm
Round bar (section / min. diameter): Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / min. diameter): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Form tube square (section / min. diameter): 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Angle leg outside (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
UPN leg outside (section / min. diameter): UPN 180 / 900 mm, UPN 30 / 400 mm
UPN leg inside (section / min. diameter): UPN 180 / 1.000 mm, UPN 30 / 400 mm
IPN horizontal position (section / min. diameter): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Length: 1465 mm
Width: 2000 mm
Height: 1700 mm
Weight: 4000 kg

Shaft diameter: 80
Rolls diameter: 245 mm
Driven rolls: 3
Motor power: 4 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm
UPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mm
UPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mm
Length: 1450 mm
Width: 1000 mm
Height: 1400 mm
Weight: 1700 kg

Shaft diameter: 60
Upper roll diameter: 215 mm
Lower roll diameter: 215 mm
Driven rolls: 3
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mm
Square bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mm
Round bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mm
Tube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm
Form tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm
Length: 1000 mm
Width: 1400 mm
Height: 1650 mm
Weight: 950 kg

Max. sheet thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Max. flanging radius: 80 mm
Min. flanging radius: 10
Max. blank diameter: 4500 mm
Min. blank diameter: 720 mm
Max. flanging height: 150 (R 100) / 190 (R 25) mm
rotating speed: 0,35 - 0,68 m/sek.
Motor: 11 kW
Length: 4900 mm
Width: 1700 mm
Height: 2700 mm
Weight: 4550 kg

Swing over bed: 860 mm
Distance between centers: 3000 mm
Centre height: 430 mm
Spindle bore: 132 mm
swing over cross slide: 620 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: Array rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: 240 - 2/3
Cross slide travel: 435 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Length: 3470 mm
Width: 1700 mm
Height: 1730 mm
Weight: 4650 kg

Swing over bed: 400 mm
Distance between centers: 750 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 18-98, 48-265, 144-790, 385-2.120 U/min rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 7.5 kW
Weight: 1530 kg

Swing over bed: 1320 mm
Distance between centers: 3000 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 U/min rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 1/16 - 60 Tpi
Module thread range: 0.125 - 120
DP thread range: Array
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8550 kg

Swing over bed: 1320 mm
Distance between centers: 3000 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 5 - 1000
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: Array
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8550 kg

Swing over bed: 1090 mm
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg

Swing over bed: 1090 mm
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg

Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg

Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg

Swing over bed: 630 mm
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg

Swing over bed: 325 mm
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg

Punching power: 80 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg

Punching power: 80 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg

Punching power: 55 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg

Punching power: 36 ton
Throat depth: 170 mm
Number of stations: 3
Max. diameter at sheet thickness (mild steel): 27x10 mm
Stroke: 15 mm
Strokes: 24 1/min
Flat steel: 350x6 mm
Angle steel: 80x8 mm
Motor: 2.2 kW
Length: 1100 mm
Width: 800 mm
Height: 1400 mm
Weight: 485 kg

Punching power: 85 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9.2 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg

Punching power: 85 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9.2 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg

Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Strokes: 32 1/min
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Notcher: 100x10 mm
Bending unit: 150x10 mm
Motor: 5.5 kW
Length: 2100 mm
Width: 1400 mm
Height: 2060 mm
Weight: 1750 kg

Bending length: 5020 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 4 kW
Max. bending angle: 145 °
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1980 mm
Weight: 3200 kg

Bending length: 5020 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Max. bending angle: 145 °
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1980 mm
Weight: 3000 kg

Bending length: 8020 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1000 mm

Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1000 mm

Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm

Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm

Bending length: 5010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm

pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1020 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 680 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2082 kg

pressing capacity: 30 to
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
rapid speed Y-axis: 210 mm/s
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg

pressing capacity: 320 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 17100 kg

pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 5250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 14750 kg

pressing capacity: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 140 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 4250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 12600 kg

Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Max. bending angle: 145 °
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1980 mm
Weight: 2600 kg

pressing capacity: 100 to
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg

Sheet Thickness - mild steel: 0.4 - 3.5 mm
Max. sheet width: 200 mm
Max. cross-section: 200 x 3 mm
Feed roll diameter: 80 mm
Feeding speed: 75 m/min
Feeding acceleration: 10 m/s²
Motor torque: 10 Nm

Tube diameter: 3/4" 26,9 mm, 1" 33,7 mm, 1¼" 42,4 mm, 1½" 48,3 mm, 2" 60,3 mm
Max. wall thickness: 5 mm
Max. wall thickness stainless steel: 3 mm
Weight: 87 kg

Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °

Bending length: 1050 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg

Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 14 mm
Bevel angle: 30 °
Spindle speed (load-free): 9 rpm
Plate thickness: 6 - 40 mm
Min. plate width: 55 mm
Min. tube inner diameter: 100 mm
Feed speed: 2600 mm/min
Motor: 2.2 kW
Length: 589 mm
Width: 541 mm
Height: 320 mm
Weight: 65 kg

Ref. no.: 18142
Manufacturer: DEMAG
Year of construction: 1997

Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar

Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg

Ref. no.: 18092
Manufacturer: ENGEL
Year of construction: 2001

Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm

Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar

Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg

Further information:
ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine

This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout.

Motor and Hydraulic System

The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other.

Operating Principle

The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle.

Applications

Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.