Alfa Laval LKH70 Centrifugal pump, Serial: 36794, Stainless centrifugal pump, 22Kw motor, 3Ph

Alfa Laval SX2-013 Lobe pump, Serial: 423753, Stainless lobe pump, 40mm inlet and outlet, 0.55Kw motor, 3Ph

Alfa Laval SX2-013H Lobe pump, Serial: 382784, Stainless lobe pump, 40mm inlet and outlet, 0.55Kw motor, 3Ph

Alfa Laval SX2-013 Lobe pump, Serial: 433642, Stainless lobe pump, 50mm inlet and outlet, 0.55Kw motor, 3Ph

Alfa Laval SX4-063H Lobe pump, Serial: 349019, Stainless lobe pump, mounted on stainless frame, variable speed control, 50mm inlet and outlet pipe, 3Kw motor, mobile, 3Ph

Endoline 605 case taper, Top and bottom case taper, side grip belts, max box width 400mm x max box height 450mm, with roller conveyor outfeed, mobile, 3Ph

Endoline 602 case taper, Top case taper, side grip belts, max box width 350mm x max box height 500mm, mobile, 3Ph

Arnott Stainless conveyor, 2019, Stainless, slat band conveyor, belt dimensions 1000mm x 250mm, mobile

Aro Double diaphragm pump, Air operated double diaphragm pumps, mounted on stainless mobile stand

Sandpiper Double diaphragm pump, Air operated double diaphragm pumps, mounted on stainless mobile stand

Aro Double diaphragm pump, Air operated double diaphragm pumps, mounted on stainless stand

Tapflo TX225 STT Double diaphragm pump, The Tapflo sanitary series air operated double diaphram pumps, ideal for food, beverage, pharma and cosmetic industries, mounted on stainless frames, 5 in stock

STS DTP05 Corner drum lifting trolley, Corner drum lifting trolley, 350Kgs SWL, the universal drum catch lets you connect the unit to a wide variety of drums, height adjustable drum gripper, mobile, 5 in stock

Woods 56JM/20/4/6/10-36 flow extract fan, Year 2021, 560mm fan diameter, 1420 rev/min, see plate for spec, 5 in stock, 3Ph

DTB Stainless conveyor, Stainless conveyor, belt dimensions 1500mm x 300mm, stainless side guides, 3Ph

DTB washing conveyor, Stainless, belt dimensions 1200mm x 300mm, with jet spray mounted on top of the conveyor with recirculation tank and pump for washing products, previously used for olives, 3Ph

DTB Bucket elevator washing conveyor Stainless, bucket elevator conveyor, site inside a 500L stainless tank with recirculation pump, previously used for washing olives, elevates to 1800,, belt width 250mm, overall length of system 2700mm, two in stock, 3Ph

Grundfos CHI2-30 A-W-G Pump, 2010, 2900RPM, 2.5M3/H, rated head 19M, 19mm impeller, max operating pressure 10bar, 3Ph (two in stock)

Hache 1720E Turbidimeter, Hach 1720E Continuous-reading Nephelometric Low Range Process Turbidimeter, Continuously flowing sample flows through the patented bubble removal system, which vents entrained air from the sample stream and eliminates the most significant interference in low level turbidity measurement. The 1720E Turbidimeter is not affected by variations in flow and pressure, The 1720E Turbidimeter uses the sc200 Controller to receive data from up to two sensors. A built-in data logger collects turbidity measurement at user selectable intervals (1-15 minutes), along with calibration and verification points, alarm history, and instrument setup changes for 6 months.

Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals

Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available

Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph

Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec

Sigma S2CAHM07120PVT Metering pump, Serial: 2010132518, 2010, 0.25Kw, Metering pumps, 3 in stock

Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,

AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes

Punching power: 110 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg

Bending length: 1550 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 180 mm
Lower roll diameter: 180 mm
Lateral roll diameter: 150 mm
Bending speed: 1,5 / 6 m/min
Motor power: 5 kW
Length: 3900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 3250 kg

Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Opening of upper beam: 190 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 5200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 1550 kg

Saw frame: Pivot frame
Band dimensions: 4160x34x1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 450x320 mm
Cutting capacity 30°: round 320 mm, square 320 mm, rectangular 380x320 mm
Cutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mm
Cutting capacity - 30°: round 320 mm, square 320 mm, rectangular 380x320 mm
Cutting capacity - 45°: round 320 mm, square 300 mm, rectangular 340x320 mm
Cutting capacity - 60°: round 230 mm, square 220 mm, rectangular 230x220 mm
Working height: 860 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2230 mm
Width: 1150 mm
Height: 2140 mm
Weight: 1030 kg

Length: 835 mm

Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 420 mm
Cutting capacity 0° square: 420 mm
Cutting capacity 0° flat: 420 x 420 mm
Working height: 805 mm
Hydraulic motor: 1.1 kW
Motor: 5.5 kW
Servomotor: 1 kW
Coolant pump motor: 0.12 kW
Length: 2860 mm
Width: 1980 mm
Height: 2100 mm
Weight: 3700 kg

Max. thickness - mild steel: 0.8 mm
Throat depth: 80 mm
Shaft length: 110 mm
Tools: 7 pcs.
Rolls diameter: 52 mm
Length: 380 mm
Width: 180 mm
Height: 380 mm
Weight: 30 kg

Cauhe VA (1450 x 1850 mm) Die Cutter / Cauhe VA Heavy-Duty Large Format Die Cutter

Very neat machine, rarely used.

Max format: (1450 x 1850 mm)
Model: VA
Year: 2008

Available immediately!

Bending length: 2040 mm
Sheet thickness (420 N/mm²): 3 mm
Max. thickness - stainless steel: 2 mm
Max. thickness - aluminium: 4.5 mm
Antrieb: Motorized
Motor bending beam: 1.5 kW
Upper beam motor: 1.1 kW
Back gauge: 750 mm
Opening of upper beam: 140 mm
Bending speed: 50 °/sek
Length: 3060 mm
Width: 1650 mm
Height: 1500 mm
Weight: 2730 kg

Werkbank mit schraubstock / Gedore

2Meter x0,7 meter

2xschubladen

2x flügeltüren

Walther CN - 550 -PN Gleitschleifanlage u. Rösler Z300 Turbo Floc Zentrifuge<br /><br />-Walther Trowal CN-550-PN<br />-1460 U/min<br />-550 Liter Fassungsvermögen<br />-Motor 3,5 KW<br />-Pneumatischer Schallschutzdeckel<br />-Schaltschrank<br />-Schmutzwasser / Ablasseinrichtung<br />-Compound - Gleitsteine 2xBoxen<br />-Dokumentation<br />-Abmaße: LxBxH 2x1,8x1,8 Meter / Gewicht 1500Kg<br /><br />-Rösler - Z300 Turbo-Floc / Zentrifuge<br />-Baujahr 1996<br />-Rotordrehzahl 3160 U/min<br />-Leistung 4 KW<br />-Max. Durchsatzleistung 800 / Liter/ Stunde<br />-Dokumentation<br />-Abmaße LxBxH 1,7x1x1,6 Meter / Gewicht 400Kg<br /><br />Bvticjyuvm

Spiralbohrerschleifmaschine DAREX SP 2500

-Schleifdurchmesser 1,5-16mm
-3x Werkzeugaufnahmen
-1x Ersatzschleifscheibe
-Maschinenunterbau
-Dokumentation

Abmaße:
LxBxH 0,5x0,5x1,6 Meter / Gewicht 80Kg

D&K Europa System B2 Laminator automatic laminating machine

Technical data:
Max sheet size: 540mm x 740mm
Min sheet size: 210mm x 220mm
Min grammage: 115 gsm
Max grammage: 400 gsm
Operating temperature: 80-145°C
Weight: 750 kg
Power supply 380V
Steel, chrome-plated cylinder
Pneumatic pressure, separation and automatic feeding from a high stack.
Sheet feeding accuracy: ±2.0mm.
Touch panel for easy operation.
Sheet straightening module.

Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm

Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 250 mm
Revs: 245 - 4000 r.p.m.
Tapping capacity: M25
max. drilling depth: 120 mm
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.195 mm
Table: 300 x 270 mm
Base dimensions: 600 x 380 mm
Length: 400 mm
Width: 655 mm
Height: 1185 mm
Weight: 280 kg

Horizon BQ 470

With Nordson
Pur unit

Bending length: 1050 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 75 mm
Length: 1930 mm
Width: 700 mm
Height: 1160 mm
Weight: 300 kg

MEPAC PCA 01 / Abdreh - Poliermaschine

-CE Kennung
-Baujahr 2022
-Spitzenhöhe 250mm
-Dreibackenfutter 120mm
-Wechselbacken
Caopv0E3V0
-Rollbarer Unterschrank
-Stufenlose Drehzahlregulierung
-Drehzahlrichtung Rechts / Links
-Not / Aus

Abmaße:
LxBxH 0,8x0,9x1,5 Meter / Gewicht 100 Kg