10
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 130 mmx-Weg: 6000 mmy-Weg: 2100 mmz-Weg: 900 mmw-Achse: 900 mmSteuerung: SiemensTyp: 840 DDrehzahl: 1800 U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 6000 mm
y-Weg: 2100 mm
z-Weg: 900 mm
w-Achse: 900 mm
Steuerung: Siemens
Typ: 840 D
Drehzahl: 1800 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 6000 mm
y-Weg: 2100 mm
z-Weg: 900 mm
w-Achse: 900 mm
Steuerung: Siemens
Typ: 840 D
Drehzahl: 1800 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7.5 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7.5 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7.5 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
9
Printing machineryPost press machinesStapler
For Sale: Large Format Booklet Maker
Designed for digital and litho output
Max sheet length: 640mm
Creates: A4 landscape & portrait booklets
Functions: Jogging, stapling, folding
Optional: Modular T640 face trimmer
Automatic operation: Photo sensor detects sheets and cycles machine automatically
Capacity: Produces booklets up to 100 pages
Precise alignment: Side jogs sheets from both sides before stapling
Stapling:
2 stapling heads, 4 stapling positions
Clenched staple finish
Low staple warning & stop function
Space-saving design: Built-in conveyor stacker folds away when not in use
Energy-efficient: Drive motor shuts down automatically when idle
Resettable counter
Specifications:
Paper size: A5 to 640mm x 320mm
Power supply: 220V, 50Hz
📩 Contact us for pricing and more details!
For Sale: Large Format Booklet Maker
Designed for digital and litho output
Max sheet length: 640mm
Creates: A4 landscape & portrait booklets
Functions: Jogging, stapling, folding
Optional: Modular T640 face trimmer
Automatic operation: Photo sensor detects sheets and cycles machine automatically
Capacity: Produces booklets up to 100 pages
Precise alignment: Side jogs sheets from both sides before stapling
Stapling:
2 stapling heads, 4 stapling positions
Clenched staple finish
Low staple warning & stop function
Space-saving design: Built-in conveyor stacker folds away when not in use
Energy-efficient: Drive motor shuts down automatically when idle
Resettable counter
Specifications:
Paper size: A5 to 640mm x 320mm
Power supply: 220V, 50Hz
📩 Contact us for pricing and more details!
Designed for digital and litho output
Max sheet length: 640mm
Creates: A4 landscape & portrait booklets
Functions: Jogging, stapling, folding
Optional: Modular T640 face trimmer
Automatic operation: Photo sensor detects sheets and cycles machine automatically
Capacity: Produces booklets up to 100 pages
Precise alignment: Side jogs sheets from both sides before stapling
Stapling:
2 stapling heads, 4 stapling positions
Clenched staple finish
Low staple warning & stop function
Space-saving design: Built-in conveyor stacker folds away when not in use
Energy-efficient: Drive motor shuts down automatically when idle
Resettable counter
Specifications:
Paper size: A5 to 640mm x 320mm
Power supply: 220V, 50Hz
📩 Contact us for pricing and more details!
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
9
Metal working and machine toolsLathesCenter lathes and spindle lathes
WEILER CONDOR B mit Dreiachs - Digitalanzeige-Spitzenweite 165mm-Umlaufdurchmesser über Bett 300mm-Spitzenweite 750mm-Spindeldurchlass 40mm-Spindeldrehzahlen 22-2800 U/min /32 Stück-Automatische Längs / Planvorschübe-Gewinde / Metrisch /Zoll / Diametral / Modulgewinde-Spannzangen / Schnellspanneinrichtung incl. 22 Spannzangen-Dreibackenfutter-Futterschutz-Multifix mit Einsätzen-BohrfutterVw7H7Uj-Spänerückwand-Zentalschmierung-2xNOT/AUS-DokumentationAbmaße:LxBxH 1,9x0,9x1,5Meter / Gewicht 1100Kg
WEILER CONDOR B mit Dreiachs - Digitalanzeige
-Spitzenweite 165mm
-Umlaufdurchmesser über Bett 300mm
-Spitzenweite 750mm
-Spindeldurchlass 40mm
-Spindeldrehzahlen 22-2800 U/min /32 Stück
-Automatische Längs / Planvorschübe
-Gewinde / Metrisch /Zoll / Diametral / Modulgewinde
-Spannzangen / Schnellspanneinrichtung incl. 22 Spannzangen
-Dreibackenfutter
-Futterschutz
-Multifix mit Einsätzen
-Bohrfutter
Vw7H7Uj
-Spänerückwand
-Zentalschmierung
-2xNOT/AUS
-Dokumentation
Abmaße:
LxBxH 1,9x0,9x1,5Meter / Gewicht 1100Kg
-Spitzenweite 165mm
-Umlaufdurchmesser über Bett 300mm
-Spitzenweite 750mm
-Spindeldurchlass 40mm
-Spindeldrehzahlen 22-2800 U/min /32 Stück
-Automatische Längs / Planvorschübe
-Gewinde / Metrisch /Zoll / Diametral / Modulgewinde
-Spannzangen / Schnellspanneinrichtung incl. 22 Spannzangen
-Dreibackenfutter
-Futterschutz
-Multifix mit Einsätzen
-Bohrfutter
Vw7H7Uj
-Spänerückwand
-Zentalschmierung
-2xNOT/AUS
-Dokumentation
Abmaße:
LxBxH 1,9x0,9x1,5Meter / Gewicht 1100Kg
5
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Motor power: 7 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Motor power: 7 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Motor power: 7 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
3
Metal working and machine toolsAccessories and spare parts
Lagernummer: 1077-Z01208Maschinenart: ErsatzteileFabrikat: SiemensTyp: 3UN9 102 SicherheitsrelaisBaujahr: -Steuerung: konventionellLagerort: DorstenUrsprungsland: -Lieferzeit: sofortFrachtbasis: ab StandortPreis: Auf Anfrage
Lagernummer: 1077-Z01208
Maschinenart: Ersatzteile
Fabrikat: Siemens
Typ: 3UN9 102 Sicherheitsrelais
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
Maschinenart: Ersatzteile
Fabrikat: Siemens
Typ: 3UN9 102 Sicherheitsrelais
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
4
Metal working and machine toolsAccessories and spare parts
Lagernummer: 1077-Z01222Maschinenart: ErsatzteileFabrikat: SiemensTyp: 3TF47 22-0AL2 SchützBaujahr: -Steuerung: konventionellLagerort: DorstenUrsprungsland: -Lieferzeit: sofortFrachtbasis: ab StandortPreis: Auf Anfrage
Lagernummer: 1077-Z01222
Maschinenart: Ersatzteile
Fabrikat: Siemens
Typ: 3TF47 22-0AL2 Schütz
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
Maschinenart: Ersatzteile
Fabrikat: Siemens
Typ: 3TF47 22-0AL2 Schütz
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
10
Metal working and machine toolsMachining centersMachining centers horizontal
x-Weg: 700 mmy-Weg: 700 mmz-Weg: 700 mmSteuerung: SiemensTyp: 840DslAnzahl der Spindeln: 2 St.Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 700 mm
y-Weg: 700 mm
z-Weg: 700 mm
Steuerung: Siemens
Typ: 840Dsl
Anzahl der Spindeln: 2 St.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 700 mm
z-Weg: 700 mm
Steuerung: Siemens
Typ: 840Dsl
Anzahl der Spindeln: 2 St.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
4
Food machinesAccessories and spare parts
Adam ABK32 scales, Stainless platform scale, 0.001Kg - 32Kgs, 1Ph, three in stock
Adam ABK32 scales, Stainless platform scale, 0.001Kg - 32Kgs, 1Ph, three in stock
4
Packaging machineryPacking machines
Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
6
Food machinesBeverage productionPumps
Packo FP2 Sanitary pump, 2 x Packo sanitary pumps, easily cleanable process pumps ideal for dairies, breweries, beverage industry, distilleries and more, 3Ph
Packo FP2 Sanitary pump, 2 x Packo sanitary pumps, easily cleanable process pumps ideal for dairies, breweries, beverage industry, distilleries and more, 3Ph
15
Printing machineryPost press machinesCollecting machines
Theisen en Bonitz Sprint B312 VP ( 2008)
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
Complete with QSM 304 stitching - folding- 3 side trimming unit
Equiped with hohner stithing heads
Loops stitching heads available
In mint condition !
Theisen en Bonitz Sprint B312 VP ( 2008)
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
Complete with QSM 304 stitching - folding- 3 side trimming unit
Equiped with hohner stithing heads
Loops stitching heads available
In mint condition !
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
Complete with QSM 304 stitching - folding- 3 side trimming unit
Equiped with hohner stithing heads
Loops stitching heads available
In mint condition !
9
Printing machineryPost press machinesCollecting machines
Mkw 30ut/12
12 stations collating
Stitching folding trimming machine
Hohner stitching heads
Possible with loop stitching heads
Mkw 30ut/12
12 stations collating
Stitching folding trimming machine
Hohner stitching heads
Possible with loop stitching heads
12 stations collating
Stitching folding trimming machine
Hohner stitching heads
Possible with loop stitching heads
5
Printing machineryPost press machinesCollecting machines
Theisen en Bonitz Sprint B312 VP ( 2008)
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
with Theisen en Bonitz 304 QSM
Theisen & Bonitz 304 QSM
Stitching and folding device:
– Motorized format setting
– 2 Hohner stitching heads
– Friction free Knife Fold (cloth system)
– Automatic layer thickness adjustment
– Front cutting device for cutting to 4 cm,
sections greater than 1.5 cm
– Head and foot trimming each from 3 to 20 mm at about 80 pages,
80 g / sqm.
– Power: 400 V, 50 Hz
Theisen en Bonitz Sprint B312 VP ( 2008)
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
with Theisen en Bonitz 304 QSM
Theisen & Bonitz 304 QSM
Stitching and folding device:
– Motorized format setting
– 2 Hohner stitching heads
– Friction free Knife Fold (cloth system)
– Automatic layer thickness adjustment
– Front cutting device for cutting to 4 cm,
sections greater than 1.5 cm
– Head and foot trimming each from 3 to 20 mm at about 80 pages,
80 g / sqm.
– Power: 400 V, 50 Hz
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
with Theisen en Bonitz 304 QSM
Theisen & Bonitz 304 QSM
Stitching and folding device:
– Motorized format setting
– 2 Hohner stitching heads
– Friction free Knife Fold (cloth system)
– Automatic layer thickness adjustment
– Front cutting device for cutting to 4 cm,
sections greater than 1.5 cm
– Head and foot trimming each from 3 to 20 mm at about 80 pages,
80 g / sqm.
– Power: 400 V, 50 Hz
2
Printing machineryPost press machinesCollecting machines
Theisen and Bonitz Sprint B312 VP (2008)
12 stations half pile + 304 QSM three-cutter
Year of construction 2008
Theisen and Bonitz Sprint B312 VP (2008)
12 stations half pile + 304 QSM three-cutter
Year of construction 2008
12 stations half pile + 304 QSM three-cutter
Year of construction 2008
6
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg
7
Metal working and machine toolsAccessories and spare partsBar stock carriers
Bar length: 3000
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
Bar length: 3000
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
10
Printing machineryPost press machinesDie cutter
Heidelberg SBB ( 56×82 cm) Gray cylinder
Very nice Heidelberg SBB cylinder
Fitted with safety covers with switches.
Electronics renewed.
Complete with 2 punch frames
Heidelberg SBB ( 56×82 cm) Gray cylinder
Very nice Heidelberg SBB cylinder
Fitted with safety covers with switches.
Electronics renewed.
Complete with 2 punch frames
7
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm
Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm
2 hydraulic core pull
Dimensions:
4960 x 3656 x 3360mm
Weight: 14500KG
Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm
Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm
2 hydraulic core pull
Dimensions:
4960 x 3656 x 3360mm
Weight: 14500KG
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm
Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm
2 hydraulic core pull
Dimensions:
4960 x 3656 x 3360mm
Weight: 14500KG
6
Plastic processing machinesHeating and cooling systems
Chiller INDUSTRIAL FRIGO type SIRE1 - 165/350 HP/Z/X With integrated energy saving system
Nominal cooling capacity: 164 KW - 141000 kcal/H
2 compressors 13,8 KW - max 24,5 KW
1 pump 10 KW - 470 L/min - 5,3 bars
Cooling capacity 175 KW - 151000 kcal/H
1 pump2 KW - 500 L/min - 1,7 bars
4 fans power of 1,3 KW - 65 000 m3/H
Internal capacity : 750 liters
Dimension : 3700 mm x 1100 mm x 2100 mm
Weight : 2300 KG
Chiller INDUSTRIAL FRIGO type SIRE1 - 165/350 HP/Z/X With integrated energy saving system
Nominal cooling capacity: 164 KW - 141000 kcal/H
2 compressors 13,8 KW - max 24,5 KW
1 pump 10 KW - 470 L/min - 5,3 bars
Cooling capacity 175 KW - 151000 kcal/H
1 pump2 KW - 500 L/min - 1,7 bars
4 fans power of 1,3 KW - 65 000 m3/H
Internal capacity : 750 liters
Dimension : 3700 mm x 1100 mm x 2100 mm
Weight : 2300 KG
Nominal cooling capacity: 164 KW - 141000 kcal/H
2 compressors 13,8 KW - max 24,5 KW
1 pump 10 KW - 470 L/min - 5,3 bars
Cooling capacity 175 KW - 151000 kcal/H
1 pump2 KW - 500 L/min - 1,7 bars
4 fans power of 1,3 KW - 65 000 m3/H
Internal capacity : 750 liters
Dimension : 3700 mm x 1100 mm x 2100 mm
Weight : 2300 KG
10
Metal working and machine toolsMilling machinesTravelling column milling machines
x-travel: 30000 mm
y-travel: 3600 mm
z-travel: 1900 mm
Control: Heidenhain
Type: TNC 530 i
Milling head - pivoting: CNC
Speed: 4000 rpm
Cone mount: DIN 69871+AD mm
Spindle motor: 46 kW
Feed: 10000mm/min
Rapid traverse: 25000 mm/min
Chip conveyor: 2 pcs.
Panel field: 30000x3000 mm
Total power requirement: 85 kW
Machine weight approx.: t
Space requirement approx.: m
x-travel: 30000 mm
y-travel: 3600 mm
z-travel: 1900 mm
Control: Heidenhain
Type: TNC 530 i
Milling head - pivoting: CNC
Speed: 4000 rpm
Cone mount: DIN 69871+AD mm
Spindle motor: 46 kW
Feed: 10000mm/min
Rapid traverse: 25000 mm/min
Chip conveyor: 2 pcs.
Panel field: 30000x3000 mm
Total power requirement: 85 kW
Machine weight approx.: t
Space requirement approx.: m
y-travel: 3600 mm
z-travel: 1900 mm
Control: Heidenhain
Type: TNC 530 i
Milling head - pivoting: CNC
Speed: 4000 rpm
Cone mount: DIN 69871+AD mm
Spindle motor: 46 kW
Feed: 10000mm/min
Rapid traverse: 25000 mm/min
Chip conveyor: 2 pcs.
Panel field: 30000x3000 mm
Total power requirement: 85 kW
Machine weight approx.: t
Space requirement approx.: m
7
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
8
Metal working and machine toolsSheet metal working machinesSlitting and cut-to-length lines
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
4
Metal working and machine toolsSawing
Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
3
Packaging machineryPacking machines
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
12
Woodworking machinerySawingBelt saws
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 saw blades, documentation
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 saw blades, documentation
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 saw blades, documentation
8
Commercial vehiclesTrailersLow loader trailer
Anzahl Achsen: 2 St.Länge: 7,7 mGesamtgewicht: 20 tAchslast vorne: 10 tAchslast hinten: 10 tBreite: 2,5 m
Anzahl Achsen: 2 St.
Länge: 7,7 m
Gesamtgewicht: 20 t
Achslast vorne: 10 t
Achslast hinten: 10 t
Breite: 2,5 m
Länge: 7,7 m
Gesamtgewicht: 20 t
Achslast vorne: 10 t
Achslast hinten: 10 t
Breite: 2,5 m
10
Commercial vehiclesTrailersLow loader trailer
Anzahl Achsen: 2 St.Gesamtgewicht: 32,5 tAchslast vorne: 9 tAchslast hinten: 9 tBereifung: 385/65R22,5 .
Anzahl Achsen: 2 St.
Gesamtgewicht: 32,5 t
Achslast vorne: 9 t
Achslast hinten: 9 t
Bereifung: 385/65R22,5 .
Gesamtgewicht: 32,5 t
Achslast vorne: 9 t
Achslast hinten: 9 t
Bereifung: 385/65R22,5 .
10
Metal working and machine toolsSheet metal working machinesPress brakes
Druck: 200 tAbkantlänge: 6050 mmStänderweite: 5500 mmSteuerung: CybelecTyp: ModEva 12 SGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Druck: 200 t
Abkantlänge: 6050 mm
Ständerweite: 5500 mm
Steuerung: Cybelec
Typ: ModEva 12 S
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Abkantlänge: 6050 mm
Ständerweite: 5500 mm
Steuerung: Cybelec
Typ: ModEva 12 S
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsMachining centersMachining centers horizontal
x-Weg: 800 mmy-Weg: 630 mmz-Weg: 710 mmSteuerung: SiemensTyp: 840DslAnzahl der Spindeln: 2 St.Drehzahl: 30-12000 U/minWerkzeugaufnahme: HSK 63Werkzeugwechsler: 80 Pos.Vorschub: 1-40.000 mm/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 800 mm
y-Weg: 630 mm
z-Weg: 710 mm
Steuerung: Siemens
Typ: 840Dsl
Anzahl der Spindeln: 2 St.
Drehzahl: 30-12000 U/min
Werkzeugaufnahme: HSK 63
Werkzeugwechsler: 80 Pos.
Vorschub: 1-40.000 mm/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 630 mm
z-Weg: 710 mm
Steuerung: Siemens
Typ: 840Dsl
Anzahl der Spindeln: 2 St.
Drehzahl: 30-12000 U/min
Werkzeugaufnahme: HSK 63
Werkzeugwechsler: 80 Pos.
Vorschub: 1-40.000 mm/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
7
Metal working and machine toolsLathesHeavy-duty lathes
Drehdurchmesser über Bett: 1070 mmDrehdurchmesser über Support: 710 mmDrehlänge: 11000 mmSteuerung: SiemensTyp: 840 DBettbreite: 710 mmGetriebestufen: 2Drehzahl: 3,55-710 U/minPinolendurchmesser: 200 mmPinolenhub: 350 mmSpindeldurchlass: 128 mmPlanscheibe: 1000 mmLünette: 800 mm offenRollenbock: 2 StHauptantriebsmotor: 71 kWGesamtleistungsbedarf: kWMaschinengewicht ca.: 27 tRaumbedarf ca.: m
Drehdurchmesser über Bett: 1070 mm
Drehdurchmesser über Support: 710 mm
Drehlänge: 11000 mm
Steuerung: Siemens
Typ: 840 D
Bettbreite: 710 mm
Getriebestufen: 2
Drehzahl: 3,55-710 U/min
Pinolendurchmesser: 200 mm
Pinolenhub: 350 mm
Spindeldurchlass: 128 mm
Planscheibe: 1000 mm
Lünette: 800 mm offen
Rollenbock: 2 St
Hauptantriebsmotor: 71 kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 27 t
Raumbedarf ca.: m
Drehdurchmesser über Support: 710 mm
Drehlänge: 11000 mm
Steuerung: Siemens
Typ: 840 D
Bettbreite: 710 mm
Getriebestufen: 2
Drehzahl: 3,55-710 U/min
Pinolendurchmesser: 200 mm
Pinolenhub: 350 mm
Spindeldurchlass: 128 mm
Planscheibe: 1000 mm
Lünette: 800 mm offen
Rollenbock: 2 St
Hauptantriebsmotor: 71 kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 27 t
Raumbedarf ca.: m
7
Food machinesBakery-, pastry equipmentCutting machines
Stainless, 12 station rotary slicer, suitable for tomatoes, eggs and other fruits, mobile, 3Ph
Stainless, 12 station rotary slicer, suitable for tomatoes, eggs and other fruits, mobile, 3Ph
6
Food machinesMixing machinery
2012 stainless cooking tumbler, capacity 60L, gas fired, tilting vessel, adjustable speed, temperature and timers, two direction rotation, ideal for rice, noodles, roasting seed and nuts, coating sweets, confectionery and jams etc
2012 stainless cooking tumbler, capacity 60L, gas fired, tilting vessel, adjustable speed, temperature and timers, two direction rotation, ideal for rice, noodles, roasting seed and nuts, coating sweets, confectionery and jams etc
9
Food machinesPackaging machinery
Otem H100 Flow wrapper 417-82 Stainless infeed 1500mm, 200mm jaw width, adjustable temperature jaw / fin seals, overall length 2500mm
Otem H100 Flow wrapper 417-82 Stainless infeed 1500mm, 200mm jaw width, adjustable temperature jaw / fin seals, overall length 2500mm
3
Food machinesOther
Lot 284 Apple 15 head depositor Model: CCP12 Stainless cantilever framed 15 head machine See video at: http://www.youtube.com/watch?v=tu7T0zSuov8
Lot 284 Apple 15 head depositor Model: CCP12 Stainless cantilever framed 15 head machine See video at: http://www.youtube.com/watch?v=tu7T0zSuov8
1
Construction machineryAccessories and spare parts
12 drawers, 10 of which are filled with tools
100 cm working height, 105 cm wide with wooden worktop.
new in box
12 drawers, 10 of which are filled with tools
100 cm working height, 105 cm wide with wooden worktop.
new in box
100 cm working height, 105 cm wide with wooden worktop.
new in box
2
Material handlingTransport equipment
GKS 5 ton Heavy duty jack, hydraulic lifting jack, 2 pieces
GKS Schwerlastheber V5
GKS-PERFEKT hydraulic lifting devices meet the highest quality standards. They have been tried and tested worldwide for decades, they are robust and particularly durable. Our lifting devices / machine jacks are 100% checked and tested before delivery. In this way we guarantee perfect functionality. The customer receives a
Practical device for universal use at any location, whether in the company, in the workshop, in the open or in production
GKS 5 ton Heavy duty jack, hydraulic lifting jack, 2 pieces
GKS Schwerlastheber V5
GKS-PERFEKT hydraulic lifting devices meet the highest quality standards. They have been tried and tested worldwide for decades, they are robust and particularly durable. Our lifting devices / machine jacks are 100% checked and tested before delivery. In this way we guarantee perfect functionality. The customer receives a
Practical device for universal use at any location, whether in the company, in the workshop, in the open or in production
GKS Schwerlastheber V5
GKS-PERFEKT hydraulic lifting devices meet the highest quality standards. They have been tried and tested worldwide for decades, they are robust and particularly durable. Our lifting devices / machine jacks are 100% checked and tested before delivery. In this way we guarantee perfect functionality. The customer receives a
Practical device for universal use at any location, whether in the company, in the workshop, in the open or in production