Please wait...

7
Cato PA160 Meat grinder, Serial: 327, Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph
Cato PA160 Meat grinder, Serial: 327, Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph
6
AMP Rose Coating pan Stainless, 500L coating pans, jacketed with test pressure 120Psi, with lids, 3Ph
AMP Rose Coating pan Stainless, 500L coating pans, jacketed with test pressure 120Psi, with lids, 3Ph
5
Food machinesFruit and vegetable machinesVacuum processing systems

Polar Tumbling drum 2017, Stainless, flavouring drum, overall length 2000mm, drum diameter 1000mm, 3Ph
Polar Tumbling drum 2017, Stainless, flavouring drum, overall length 2000mm, drum diameter 1000mm, 3Ph
5
Bigtem Stainless conveyor, Stainless, side guides, belt dimensions 5150mm x 530mm, 3Ph
Bigtem Stainless conveyor, Stainless, side guides, belt dimensions 5150mm x 530mm, 3Ph
6
Unitech Boot wash station, Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph
Unitech Boot wash station, Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph
6
NEH Engineering flighted elevator conveyor,Stainless, 50Kg hopper, elevates from 300mm to 2300mm, belt width 250mm, overall length 3200mm, mobile, 3Ph
NEH Engineering flighted elevator conveyor,Stainless, 50Kg hopper, elevates from 300mm to 2300mm, belt width 250mm, overall length 3200mm, mobile, 3Ph
6
Russell Finex 30048 separator, Serial: ML196, 2012, stainless decks and meshs, three deck sieve, diameter of deck 1150mm, 3Ph
Russell Finex 30048 separator, Serial: ML196, 2012, stainless decks and meshs, three deck sieve, diameter of deck 1150mm, 3Ph
5
Russell Finex 30510 separator, Serial: FS105, 2009, stainless decks and meshs, three deck sieve, diameter of deck 1150mm, 3Ph
Russell Finex 30510 separator, Serial: FS105, 2009, stainless decks and meshs, three deck sieve, diameter of deck 1150mm, 3Ph
6
GEA Niro NS2006P piston homogeniser, Serial: 12590, 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph
GEA Niro NS2006P piston homogeniser, Serial: 12590, 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph
6
GEA Niro NS2006P piston homogeniser, Serial: 6233, 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph
GEA Niro NS2006P piston homogeniser, Serial: 6233, 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph
12
Harland Sirius Mark 5 labeller, Serial: J31878, 2007, wrap around labeller, previously used for pots of tablets, belt dimensions 3500mm x 80mm, also has top mounted top labeller used for labelling the lids of pots, comes with Allen coder, HMI touch screen controls, 3Ph
Harland Sirius Mark 5 labeller, Serial: J31878, 2007, wrap around labeller, previously used for pots of tablets, belt dimensions 3500mm x 80mm, also has top mounted top labeller used for labelling the lids of pots, comes with Allen coder, HMI touch screen controls, 3Ph
11
Ram K60D Planetary mixer, Serial: 15099, 2015, 60L stainless bowl, with beater attachment, with adjustable timer and speed controls, safety guard, 3Ph
Ram K60D Planetary mixer, Serial: 15099, 2015, 60L stainless bowl, with beater attachment, with adjustable timer and speed controls, safety guard, 3Ph
5
Dust Check SFKJ20 Dust extractor, Serial: 7927, 2013, The Compact 120 series SFKJ is an extremely compact and versatile reverse jet cleaning dust collector, capable of handling high dust loads, with Nederman back pressure flap, Atex rated, 3Ph
Dust Check SFKJ20 Dust extractor, Serial: 7927, 2013, The Compact 120 series SFKJ is an extremely compact and versatile reverse jet cleaning dust collector, capable of handling high dust loads, with Nederman back pressure flap, Atex rated, 3Ph
10
DC Norris 2700 Industrial Wok, Serial: 2827, 2013, Stainless, 150L capacity, tilting, HMI Touch screen controls, tilting for discharge, comes with a thermal oil heater for the jacket, 3Ph
DC Norris 2700 Industrial Wok, Serial: 2827, 2013, Stainless, 150L capacity, tilting, HMI Touch screen controls, tilting for discharge, comes with a thermal oil heater for the jacket, 3Ph
12
The Baumann BSB 3 L is a jogger format machine that effectively manages air removal with its innovative design. Built in 1998, this machine is reliable and suitable for various printing and graphic tasks. Its format measures 80 X 114, making it versatile for different paper sizes. It features a side flap for efficient operation on the left side. Ideal for those looking for a used yet dependable printing solution.
The Baumann BSB 3 L is a jogger format machine that effectively manages air removal with its innovative design. Built in 1998, this machine is reliable and suitable for various printing and graphic tasks. Its format measures 80 X 114, making it versatile for different paper sizes. It features a side flap for efficient operation on the left side. Ideal for those looking for a used yet dependable printing solution.
6
Printing machineryOffset printing press5-color
The Ryobi 755 Wide is a 5-color printing machine manufactured in 2008. It has accumulated approximately 69 million impressions, making it a reliable choice for high-volume printing jobs. The machine features a sheet size of 788 x 600 mm, allowing for versatility in printing tasks. Additional equipment includes an automatic blanket and rollers, as well as impression cylinder washers and a Grafix powder device. This machine is ideal for businesses looking to enhance their printing capabilities with quality and efficiency.
The Ryobi 755 Wide is a 5-color printing machine manufactured in 2008. It has accumulated approximately 69 million impressions, making it a reliable choice for high-volume printing jobs. The machine features a sheet size of 788 x 600 mm, allowing for versatility in printing tasks. Additional equipment includes an automatic blanket and rollers, as well as impression cylinder washers and a Grafix powder device. This machine is ideal for businesses looking to enhance their printing capabilities with quality and efficiency.
8
The Ryobi 924 is a state-of-the-art printing machine known for its efficiency and quality. With automatic cleaning functions for ink and blanket rollers, it optimizes the printing process. It features a semi-automatic plate change and a precise control system. This machine is ideal for businesses looking to print large runs in a short time. The continuous dampening system ensures consistent print quality with every job.
The Ryobi 924 is a state-of-the-art printing machine known for its efficiency and quality. With automatic cleaning functions for ink and blanket rollers, it optimizes the printing process. It features a semi-automatic plate change and a precise control system. This machine is ideal for businesses looking to print large runs in a short time. The continuous dampening system ensures consistent print quality with every job.
12
The Ryobi 754 P Wide XL is a highly efficient printing machine manufactured in 2008, designed for perfecting capabilities. It has the ability to produce approximately 21 million prints and supports a maximum paper size of 788 X 600 mm. Key features include automatic blanket and ink roller cleaning devices, a Ryobi PCS-G Printing Control System, and a semiautomatic plate changer. Additionally, it is equipped with a preset feeder, delivery system, and dampening controlled with Technotrans technology. This machine is suitable for high-volume printing and offers advanced functionality for optimal production efficiency.
The Ryobi 754 P Wide XL is a highly efficient printing machine manufactured in 2008, designed for perfecting capabilities. It has the ability to produce approximately 21 million prints and supports a maximum paper size of 788 X 600 mm. Key features include automatic blanket and ink roller cleaning devices, a Ryobi PCS-G Printing Control System, and a semiautomatic plate changer. Additionally, it is equipped with a preset feeder, delivery system, and dampening controlled with Technotrans technology. This machine is suitable for high-volume printing and offers advanced functionality for optimal production efficiency.
1
Metal working and machine toolsMachining centersMachining centers horizontal
Ad-Description English 2. Line (long)
Ad-Description English
2. Line
(long)
11
Metal working and machine toolsPressesHydraulic presses
Kaiser-Presse 50to -Ausstellungsmaschine / Null Betriebsstunden -Elektrohydraulischer Antrieb -Betätigung: Fußpedale und Drucktaster am Bedienpult -Druckkraft max.: 50 Tonnen -Leistungsaufnahme: 0,75 kW -Spannung: 230 V -Gestellbreite: 930 mm -Maximale Gestellbreite inkl. Handkurbel und Elektroeinheit: 1300 mm -Gesamthöhe: 1900 mm -Hub des Zylinders: 145 mm plus 60 mm Gewindespindel -Nutzbare Breite – Arbeitsbereich innen: max. 750 mm -Nutzbare Höhe – Arbeitsbereich: 0 mm bis 780 mm -Tiefe des Gestells: 220 mm -Gesamttiefe mit Fuß: 535 mm (Befestigung am Boden möglich) -Auflagentiefe des höhenverstellbaren Arbeitstisches (Quertraverse): 245 mm -Quertraverse verstellbar in 6 Positionen (Lochabstand: 140 mm) -Höhenverstellung der Quertraverse über Handkurbel (kein manuelles Anheben notwendig) -Hydraulikeinheit seitlich verschiebbar: 300 mm (kugelgelagert im oberen Führungsbereich) -Inklusive 8 Druckstücke mit integrierter Halterung: -2t mit Ø9,8 mm -3t mit Ø11,7 mm -6t mit Ø15,7 mm -8t mit Ø17,7 mm -10t mit Ø19,8 mm -12t mit Ø21,8 mm -13t mit Ø24,8 mm -15t mit Ø30 mm -Geschweißte Ausführung -Inklusive Arbeitslampe zur Ausleuchtung des Arbeitsbereichs -Druckanzeige mittels Manometer -2 Prismenauflagen im Lieferumfang enthalten -Automatischer Kolbenrückzug -Integrierte Werkzeugschale im unteren Bereich der Presse Abmaße: LxBxH 0,9x0,3x1,9 Meter / Gewicht 255Kg
Kaiser-Presse 50to

-Ausstellungsmaschine / Null Betriebsstunden
-Elektrohydraulischer Antrieb
-Betätigung: Fußpedale und Drucktaster am Bedienpult
-Druckkraft max.: 50 Tonnen
-Leistungsaufnahme: 0,75 kW
-Spannung: 230 V
-Gestellbreite: 930 mm
-Maximale Gestellbreite inkl. Handkurbel und Elektroeinheit: 1300 mm
-Gesamthöhe: 1900 mm
-Hub des Zylinders: 145 mm plus 60 mm Gewindespindel
-Nutzbare Breite – Arbeitsbereich innen: max. 750 mm
-Nutzbare Höhe – Arbeitsbereich: 0 mm bis 780 mm
-Tiefe des Gestells: 220 mm
-Gesamttiefe mit Fuß: 535 mm (Befestigung am Boden möglich)
-Auflagentiefe des höhenverstellbaren Arbeitstisches (Quertraverse): 245 mm
-Quertraverse verstellbar in 6 Positionen (Lochabstand: 140 mm)
-Höhenverstellung der Quertraverse über Handkurbel (kein manuelles Anheben notwendig)
-Hydraulikeinheit seitlich verschiebbar: 300 mm (kugelgelagert im oberen Führungsbereich)
-Inklusive 8 Druckstücke mit integrierter Halterung:
-2t mit Ø9,8 mm
-3t mit Ø11,7 mm
-6t mit Ø15,7 mm
-8t mit Ø17,7 mm
-10t mit Ø19,8 mm
-12t mit Ø21,8 mm
-13t mit Ø24,8 mm
-15t mit Ø30 mm
-Geschweißte Ausführung
-Inklusive Arbeitslampe zur Ausleuchtung des Arbeitsbereichs
-Druckanzeige mittels Manometer
-2 Prismenauflagen im Lieferumfang enthalten
-Automatischer Kolbenrückzug
-Integrierte Werkzeugschale im unteren Bereich der Presse

Abmaße:
LxBxH 0,9x0,3x1,9 Meter / Gewicht 255Kg
15
Leit & Zugspindeldrehmaschine EXCELLO - DLZ 500 SL -Spitzenhöhe 250mm -Drehdurchmesser über Bett 500mm -Drehdurchmesser über Support 310mm -Spitzenweite 3000mm -Stangendurchlass 65mm -Drehzahlen 28-1400 U/min -Automatische Längs / Planvorschübe -Dreibackenfutter 250mm -Vierbackenfutter 250mm -Multifixgrundhalter mit Einsätzen -Lünette -Werkzeugschrank -Dokumentation Abmaße: LxBxH 5,5x1,4x1,6 Meter / Gewicht 3500Kg
Leit & Zugspindeldrehmaschine EXCELLO - DLZ 500 SL

-Spitzenhöhe 250mm
-Drehdurchmesser über Bett 500mm
-Drehdurchmesser über Support 310mm
-Spitzenweite 3000mm
-Stangendurchlass 65mm
-Drehzahlen 28-1400 U/min
-Automatische Längs / Planvorschübe
-Dreibackenfutter 250mm
-Vierbackenfutter 250mm
-Multifixgrundhalter mit Einsätzen
-Lünette
-Werkzeugschrank
-Dokumentation

Abmaße:
LxBxH 5,5x1,4x1,6 Meter / Gewicht 3500Kg
9
pressing capacity: 100 to Tonnage rating point: 4.5 mm Table length: 700 mm Table width: 1000 mm Hole in table: 210 mm Stroke: 1 - 132 mm Strokes: 58 1/min Ram guides: 6 Ram adjustment: 90 mm Ram hole: 60 mm Throat depth: 300 mm Daylight: 445 mm Motor: 7.5 kW Length: 1650 mm Width: 1545 mm Height: 3011 mm Weight: 7000 kg
pressing capacity: 100 to
Tonnage rating point: 4.5 mm
Table length: 700 mm
Table width: 1000 mm
Hole in table: 210 mm
Stroke: 1 - 132 mm
Strokes: 58 1/min
Ram guides: 6
Ram adjustment: 90 mm
Ram hole: 60 mm
Throat depth: 300 mm
Daylight: 445 mm
Motor: 7.5 kW
Length: 1650 mm
Width: 1545 mm
Height: 3011 mm
Weight: 7000 kg
15
JUNG D22 / Innenrundschleifmaschine -Maschine geeignet zum Innenrund + Planschleifen -Kleinste schleifbare Bohrung 14mm -Größte schleifbare Bohrung 150mm -Schleiflänge ohne Stirnschleifeinrichtung 250mm -Schleiflänge mit Stirnschleifeinrichtung -6x Werkstückdrehzahlen 46-270 U/min -Spindelkasten Rechts/Links schwenkbar 30 Grad -Abstand der Spindelachse über Tischmitte 250mm -Größter Abstand Werkstückspindel/Schleifsupport 935mm -Spindelkasten / Schrägstellung jeweils 30 Grad -Arbeitstisch / Schrägstellung nach vorne /hinten jeweils 5 Grad -Hand / Automatikbetrieb -Kegelschleifeinrichtung -Lünette -Dreibackenfutter -Ersatzschleifspindeln Abmaße: LxBxH 2,8x1,5x1,8 Meter / Gewicht 3500Kg
JUNG D22 / Innenrundschleifmaschine

-Maschine geeignet zum Innenrund + Planschleifen
-Kleinste schleifbare Bohrung 14mm
-Größte schleifbare Bohrung 150mm
-Schleiflänge ohne Stirnschleifeinrichtung 250mm
-Schleiflänge mit Stirnschleifeinrichtung
-6x Werkstückdrehzahlen 46-270 U/min
-Spindelkasten Rechts/Links schwenkbar 30 Grad
-Abstand der Spindelachse über Tischmitte 250mm
-Größter Abstand Werkstückspindel/Schleifsupport 935mm
-Spindelkasten / Schrägstellung jeweils 30 Grad
-Arbeitstisch / Schrägstellung nach vorne /hinten jeweils 5 Grad
-Hand / Automatikbetrieb
-Kegelschleifeinrichtung
-Lünette
-Dreibackenfutter
-Ersatzschleifspindeln

Abmaße:
LxBxH 2,8x1,5x1,8 Meter / Gewicht 3500Kg
6
Cutting length: 1350 mm Max. thickness - mild steel: 3 mm Strokes: 35 1/min Back gauge: 550 mm Motor power: 3 kW Support arms: 2 pcs. Table height: 850 mm Table width: 400 mm Length: 1900 mm Width: 1350 mm Height: 1260 mm Weight: 1060 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg
8
Metal working and machine toolsDrilling machines and boring millsPillar drilling machines
Gillardon GB16 Säulenbohrmaschine -Bohrleistung 22mm -Werkzeugaufnahme auf MK 3 Adaptiert -Pinolenhub 120mm -Ständer-Ausladung 250mm -Abstand Spindel-Tisch (min./max.) 30/380mm -Spindeldrehzahlen 400-2500 U/min -Leistung 0,37 kW -Bohrfutter Abmaße: LxBxH 0,7x0,7x1,8 Meter / Gewicht 400Kg
Gillardon GB16 Säulenbohrmaschine

-Bohrleistung 22mm
-Werkzeugaufnahme auf MK 3 Adaptiert
-Pinolenhub 120mm
-Ständer-Ausladung 250mm
-Abstand Spindel-Tisch (min./max.) 30/380mm
-Spindeldrehzahlen 400-2500 U/min
-Leistung 0,37 kW
-Bohrfutter

Abmaße:
LxBxH 0,7x0,7x1,8 Meter / Gewicht 400Kg
7
Metal working and machine toolsDrilling machines and boring millsPillar drilling machines
Gillardon GB16 Säulenbohrmaschine -Bohrleistung 22mm -Werkzeugaufnahme auf MK 3 Adaptiert -Pinolenhub 120mm -Ständer-Ausladung 250mm -Abstand Spindel-Tisch (min./max.) 30/380mm -Spindeldrehzahlen 400-2500 U/min -Leistung 0,37 kW Abmaße: LxBxH 0,7x0,7x1,8 Meter / Gewicht 400Kg
Gillardon GB16 Säulenbohrmaschine

-Bohrleistung 22mm
-Werkzeugaufnahme auf MK 3 Adaptiert
-Pinolenhub 120mm
-Ständer-Ausladung 250mm
-Abstand Spindel-Tisch (min./max.) 30/380mm
-Spindeldrehzahlen 400-2500 U/min
-Leistung 0,37 kW

Abmaße:
LxBxH 0,7x0,7x1,8 Meter / Gewicht 400Kg
8
Gleitschleifanlage / WALTHER CC315 incl. Steuerung -Modell CC315 -Drehzahlbereich 945-1445 U/min -Separate Steuerung / Ein - Aus / Timer etc. -Schallschutzdeckel -Abwasserdeckel Abmaße: LxBxH 2x1,6x1,6 Meter / Gewicht 850Kg
Gleitschleifanlage / WALTHER CC315 incl. Steuerung

-Modell CC315
-Drehzahlbereich 945-1445 U/min
-Separate Steuerung / Ein - Aus / Timer etc.
-Schallschutzdeckel
-Abwasserdeckel

Abmaße:
LxBxH 2x1,6x1,6 Meter / Gewicht 850Kg
11
LNS PB 80 / Stangen Anfasmaschine / Anspitzmaschine -CE-Kennung -Anfasdurchmesser - 30 Grad 8-80mm -Anfasdurchmesser - 45 Grad 8-60mm -Drehdurchmesser 10-60mm -Max Drehlänge 40mm -2xGeschwindigkeiten -Leistung 0,0-1,65 KW -Dreibackenfutter -Verstellbare Materialauflage -Dokumentation Abmaße: LxBxH 1x0,7x1,6 Meter / Gewicht 400 Kg
LNS PB 80 / Stangen Anfasmaschine / Anspitzmaschine

-CE-Kennung
-Anfasdurchmesser - 30 Grad 8-80mm
-Anfasdurchmesser - 45 Grad 8-60mm
-Drehdurchmesser 10-60mm
-Max Drehlänge 40mm
-2xGeschwindigkeiten
-Leistung 0,0-1,65 KW
-Dreibackenfutter
-Verstellbare Materialauflage
-Dokumentation

Abmaße:
LxBxH 1x0,7x1,6 Meter / Gewicht 400 Kg
12
RAUSCH 300 H Gratomat / Zahnkanten - Entgratmaschine -Max. Raddurchmesser 600 mm -Modul 1-10 -Schleifmotor 25000 U/min -Absaugung -Dreibackenfutter mit Wechselbacken -Diverse Ersatzschleifscheiben -Diverse Ersatzteile Abmaße: LxBxH 1,6x1,2x1,8 Meter / 800Kg
RAUSCH 300 H Gratomat / Zahnkanten - Entgratmaschine

-Max. Raddurchmesser 600 mm
-Modul 1-10
-Schleifmotor 25000 U/min
-Absaugung
-Dreibackenfutter mit Wechselbacken
-Diverse Ersatzschleifscheiben
-Diverse Ersatzteile

Abmaße:
LxBxH 1,6x1,2x1,8 Meter / 800Kg
1
Length: 835 mm
Length: 835 mm
2
Cutting length: 3100 mm Max. thickness - mild steel: 6 mm Max. thickness - stainless steel: 4 mm Gap in side frame: 50 mm Strokes: 15 1/min Cutting angle: 1 ° Number of downholders: 16 pcs. Pressure of downholder: 14 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 15 kW Oiltank: 200 l Support arms: 2 pcs. Table height: 865 mm Table width: 500 mm Table length: 3515 mm Length: 4110 mm Width: 2200 mm Total width with support arm und protection fence: 3700 mm Height: 2100 mm Weight: 7300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
5
Shaft diameter: 50 Rolls diameter: 155 mm Driven rolls: 2 Motor power: 1.5 kW Speed: 4 m/min Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm Length: 1050 mm Width: 750 mm Height: 1450 mm Weight: 390 kg
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
8
Cauhe IVA 120x160 Die Cutting Press – Automatic Die Cutter for Packaging & Print We are pleased to offer a Cauhe IVA die cutting press (format 120 x 160 cm) in excellent mechanical and electrical condition. This high-quality machine is designed for large-format die cutting applications in packaging, printing, and display production. 📹 Watch the machine in action: Video link Key Features Format size: 120 x 160 cm Equipped with automatic chase (closing frame) Automatic lubrication system for reduced maintenance Pneumatic clutch and brake Supplied with a Picard hardened die cutting plate Robust design – high-quality build, both mechanically and electrically Ideal for packaging, cardboard, rigid box and display production Why choose the Cauhe IVA? Proven Spanish engineering Reliable industrial-grade die cutting press Perfect for high-volume, precision cutting Suitable for board, paper, and specialty materials Ready to go into production Applications ✅ Folding cartons ✅ Rigid box production ✅ Luxury packaging ✅ Display and POS materials ✅ Industrial die cutting jobs
Cauhe IVA 120x160 Die Cutting Press – Automatic Die Cutter for Packaging & Print

We are pleased to offer a Cauhe IVA die cutting press (format 120 x 160 cm) in excellent mechanical and electrical condition. This high-quality machine is designed for large-format die cutting applications in packaging, printing, and display production.

📹 Watch the machine in action: Video link

Key Features

Format size: 120 x 160 cm

Equipped with automatic chase (closing frame)

Automatic lubrication system for reduced maintenance
Pneumatic clutch and brake
Supplied with a Picard hardened die cutting plate
Robust design – high-quality build, both mechanically and electrically
Ideal for packaging, cardboard, rigid box and display production

Why choose the Cauhe IVA?

Proven Spanish engineering
Reliable industrial-grade die cutting press
Perfect for high-volume, precision cutting
Suitable for board, paper, and specialty materials
Ready to go into production

Applications

✅ Folding cartons
✅ Rigid box production
✅ Luxury packaging
✅ Display and POS materials
✅ Industrial die cutting jobs
4
Shaft diameter: 30 Upper roll diameter: 148 mm Lower roll diameter: 118 mm Driven rolls: 2 Motor power: 0.7 / 0,85 kW Speed: 2/4 m/min Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm Length: 600 mm Width: 800 mm Height: 1450 mm Weight: 220 kg
Shaft diameter: 30
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg
10
Drehdurchmesser über Bett: 570Drehdurchmesser über Support: 365Drehlänge: 1000 mmSteuerung: Sinumerik 850Drehzahl: 2500 U/minSpindelbohrung: 62 mmMaschinengewicht ca.: 5,6 tRaumbedarf ca.: 6x2,5x2 m
Drehdurchmesser über Bett: 570
Drehdurchmesser über Support: 365
Drehlänge: 1000 mm
Steuerung: Sinumerik 850
Drehzahl: 2500 U/min
Spindelbohrung: 62 mm
Maschinengewicht ca.: 5,6 t
Raumbedarf ca.: 6x2,5x2 m
13
GDW LZ 350 incl. 3-Achs Digitalanzeige -Spitzenhöhe 175mm -Umlaufdurchmesser über Bett 310mm -Umlaufdurchmesser über Planschlitten 195mm -Spitzenweite 800mm -Spindeldurchlass 43mm -Drehzahlbereich 45-2000 U/min -Automatische Längs / Planvorschübe -Reitstock / Pinolenhub 110mm -Gewinde / Metrisch / Zoll etc. -Multifix mit Einsätzen -Dreibackenfutter 200mm -Spannzangeneinrichtung incl 22 xSpannzangen -2x Not/Aus -Kühlmitteleinrichtung -Diverse Wechselräder 5 Stück -Bohrfutter -Mitlaufende Spitze -Spänerückwand -Maschinenfüße -Diverses Werkzeug -Dokumentation Abmaße: LxBxH 1,85x0,9x1,5 Meter / Gewicht 850Kg
GDW LZ 350 incl. 3-Achs Digitalanzeige

-Spitzenhöhe 175mm
-Umlaufdurchmesser über Bett 310mm
-Umlaufdurchmesser über Planschlitten 195mm
-Spitzenweite 800mm
-Spindeldurchlass 43mm
-Drehzahlbereich 45-2000 U/min
-Automatische Längs / Planvorschübe
-Reitstock / Pinolenhub 110mm
-Gewinde / Metrisch / Zoll etc.
-Multifix mit Einsätzen
-Dreibackenfutter 200mm
-Spannzangeneinrichtung incl 22 xSpannzangen
-2x Not/Aus
-Kühlmitteleinrichtung
-Diverse Wechselräder 5 Stück
-Bohrfutter
-Mitlaufende Spitze
-Spänerückwand
-Maschinenfüße
-Diverses Werkzeug
-Dokumentation

Abmaße:
LxBxH 1,85x0,9x1,5 Meter / Gewicht 850Kg
8
Metal working and machine toolsMeasuring machinesOther
Lagernummer: 1077-Z01394Maschinenart: Messwerkzeug und MessmittelFabrikat: MITUTOYOTyp: StufenendmassBaujahr: -Steuerung: konventionellLagerort: DorstenUrsprungsland: JapanLieferzeit: sofortFrachtbasis: ab StandortPreis: Auf Anfrage
Lagernummer: 1077-Z01394
Maschinenart: Messwerkzeug und Messmittel
Fabrikat: MITUTOYO
Typ: Stufenendmass
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: Japan
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines

Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines

Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines

Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines

Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines

Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Kernbohrdurchmesser - max.: . mmBohrtiefe: . mmUmlaufdurchmesser: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: . mm
Bohrtiefe: . mm
Umlaufdurchmesser: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
11
Herzog Heymann Vacuum belt Herzog & Heymann suction belt section, with alignment section. 1 alignment ruler. 3 tool shafts diameter 30 mm, 4 suction and 2 conveyor belts (lenght 3.3m). Working width 72 cm, electrically height adjustable. Suction belt section length 3.30 m. Total machine length: ± 5.0m Total machine width 1.1 m Complete with HSS C 1100 gluing system, with 3 cold glue nozles Some tooling and spare parts

Herzog Heymann Vacuum belt

Herzog & Heymann suction belt section, with alignment section.

1 alignment ruler.
3 tool shafts diameter 30 mm,
4 suction and 2 conveyor belts (lenght 3.3m).

Working width 72 cm, electrically height adjustable.
Suction belt section length 3.30 m.

Total machine length: ± 5.0m
Total machine width 1.1 m

Complete with HSS C 1100 gluing system, with 3 cold glue nozles
Some tooling and spare parts
5
Polar 76 EM Chrome Table with air Knife change tools Spare knife Manual Bought from the first owner, very good condition.
Polar 76 EM

Chrome Table with air
Knife change tools
Spare knife
Manual
Bought from the first owner, very good condition.

Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.

Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !

Sign up now for free