13
Plastic processing machinesInjection molding machines
Ref. no.: 17540
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
Ref. no.: 17540
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18643
Manufacturer: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 4,6 x 1,6 x 2,1 m
Machine weight: 4850 kg
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.
The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards.
Key advantages of this series include:
* Robust and durable construction
* High process stability and repeatability
* Reliable ARBURG control system
* Good availability of spare parts
* Suitable for continuous industrial operation
The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market.
Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.
Ref. no.: 18643
Manufacturer: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 4,6 x 1,6 x 2,1 m
Machine weight: 4850 kg
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.
The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards.
Key advantages of this series include:
* Robust and durable construction
* High process stability and repeatability
* Reliable ARBURG control system
* Good availability of spare parts
* Suitable for continuous industrial operation
The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market.
Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.
Manufacturer: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 4,6 x 1,6 x 2,1 m
Machine weight: 4850 kg
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.
The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards.
Key advantages of this series include:
* Robust and durable construction
* High process stability and repeatability
* Reliable ARBURG control system
* Good availability of spare parts
* Suitable for continuous industrial operation
The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market.
Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18591
Manufacturer: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Ref. no.: 18591
Manufacturer: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Manufacturer: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.