Nebiolo Atena

Die cutting machine
Max format: 26x76 cm

105 cm width, 6 printing unit, Roll to Roll gravure press, Eltromat register systems, PLC upgraded electronics, 60 extra cylinders and 6 masters for sleeves, updated and upgraded pneumatics, Gas dryer

Heidelberg SM 74-8 P

Size 53 x 74 cm, CP 2000,
Alcolor vario dampening, Technotrans Combistar Beta C,
Autoplate, Blanket wash, Roller wash, Impression cylinder wash,
Heidelberg Alphatronic 200 powderspray, Perfecting 4-4 or 8-0

Impressions: 135 Mil.

pressing capacity: 400 to
Stroke: 500 mm
Table: 5.000 x 3.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 3050 mm
Horizontal movable cylinder: 2.2 mm
Hydraulicaly movable stand: 3.6 mm
Length: 4500 mm
Width: 5000 mm
Height: 2600 mm
Weight: 24000 kg

Heidelberg SM 52-5 LX Anicolor UV

Format: 36 x 52 cm, Anicolor, Prinect press center, Alcolor dampening, Technotrans cooling and recirculation device, Inking unit temp control, Watercooled machine, Autoplate, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x IST UV interdeck dryer, 1 x IST UV end dryer, Powderspray, Extended delivery.
Machine nr: GS000747, Impressions: 60 million

Heidelberg CX 102-4 sheetfed press

Format: 72 x 102 cm, CP 2000, Wallscreen, Impress control, Presscenter instant gate, Presscenter net profiler, Alcolor dampening, Preset Plus Feeder, Preset Plus delivery, Technotrans Combistar Beta 140 L air cooled, Heidelberg washstar for blanket and impression cylinder and rollers, Powderspray, Software version S15B.27.00
Machine nr: 550780, Impressions: 240 million

Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good

Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages

Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws

pressing capacity: 200 to
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg

pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg

pressing capacity: 300 to
Stroke: 500 mm
Table: 3.000 x 2.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1300 mm
Hydraulicaly movable stand: 2000 mm
Length: 3100 mm
Width: 3000 mm
Height: 2600 mm
Weight: 11500 kg

Complete with
Size 72 x 103 cm
Suction tape feeder
PQC-S
KHS-IA
KMS
AMR
PDC-SX Photo spectral measurement system
Wallscreen
A-APC Simultanious plate changers
Komorimatic dampening with Technotrans Beta C 280 L
Automatic Ink Roller wash
Impression cylinder wash device
Blanket cylinder wash device
Grafix 102-PowderMax CDB sprayer
Rilsan roller instead of copper rollers
Grafix powder extraction PRS 4102V.

Linde Cryoline MT1250 Freezing tunnel, Serial: 5-199, 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, o

Druckleistung: 150 l/min.
Tank: 150 l
Anzahl Zylinder: St.

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1020 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2350 mm
Weight: 1985 kg

pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg

In pursuit of efficient high quality printing machinery, Worldly develops machines featuring user friendly automatic operation and high stability of mechanical equipment made by specialized technology and deliberate design. Throughout the use of a central control system, including PLC control, human-machine touch screen interface and automatic alarm systems, technical operators can easily and accurately monitor the required printing quality. The splicing design is a collaboration of vertical and horizontal movement splicers, combined with tracking pressure rollers this design insures accurate and stable splicing. An Eco- Friendly Exhaust Heat Recycling system is specially built into the design, reducing high amounts of energy costs and also helps save the environmental at the same time.


Ink resistance material of furnishing roller optimized ink circulation, avoid cylinder cell ink stock and improve printing quality. The roller driven by motorized can manual or automatic mode synchronized with printing speed.


Quick change over doctor blade holder design
Doctor blade quick locking by tool-less. The group allows horizontal, vertical and angular adjustment for the doctor blade position on engraved cylinder.


Heating recycling energy saving
Heating recycling & energy saving : Exclusive energy-saving design to increase the recycling benefit of investment costs. The system is constructed of connection ducts, ventilation modules, hood drying chambers, and central exhaust system. Recycle waste hot air to save energy consumption.


Centralized control system allow man power saving
Centralized control system integrated operator HMI, web video monitor, and color registration panel for easy access working parameter and man power saving. Automatic longitudinal and side-lay register control system. High flexibility master mark setting. Also able to save various parameter conditions to job memory.


Latest E.L.S technology
All unwinder, in-feed unit, printing units, out-feed unit,, rewinder are individually driven by AC servo motors and drives. The cylinder has direct driven to optimized the ransmission with low mechanical loss. Whole machine automation and tension controlled by high performance PLC system.

Specifications
Model WRP-HI
Maximum Machine Speed 270 m/min
Printing Maximum Speed 250 m/min
Printing Width 1000 mm / 1200 mm / 1300 mm
Printing Cylinder 350 mm - 900 mm
Material Diameter Ø800 mm / Ø1000 mm
Applications
PET, CPP, PVC,OPP, PP, PE, Nylon, Aluminum Foil, Paper.

pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1000 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg

Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg

pressing capacity: 40 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 900 mm
Rapid speed: 29 mm/s
Working speed: 5 mm/s
Length: 1600 mm
Width: 700 mm
Height: 2050 mm
Weight: 430 kg

pressing capacity: 20 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 520 mm
Working speed: 4 mm/s
Retraction speed: 30 mm/s
Length: 1200 mm
Width: 500 mm
Height: 1800 mm
Weight: 210 kg

pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Daylight: 750 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2350 kg

pressing capacity: 30 to
Cylinder fix or moveable: horizontal moveable
Stroke: 200 mm
Distance between columns: 775 mm
Piston diameter: 125x80 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 1800 mm
Weight: 400 kg

pressing capacity: 400 to
Stroke: 500 mm
Table: 4.000 x 2.550 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2550 mm
Horizontal movable cylinder: 1.8 mm
Hydraulicaly movable stand: 2.9 mm
Length: 4000 mm
Width: 4000 mm
Height: 2600 mm
Weight: 20500 kg

pressing capacity: 120 to
Cylinder fix or moveable: horizontal moveable
Stroke: 400 mm
Daylight: 900 mm
Distance between columns: 1200 mm
Working speed: 5,8 / 9,5 mm/s
Retraction speed: 9.5 mm/s
Table: 1200 x 400 mm
Motor power: 4 kW
Length: 1900 mm
Width: 1000 mm
Height: 2450 mm
Weight: 1250 kg

Druck: 400 t
Ausladung: 1140 mm
Hub: 600 mm
Tischfläche: 2000x1000 mm
Platte: 4000x1000x300 mm
Stößelabmessungen: 2000x1040 mm
Zylinder: 300 mm
Einbauhöhe: 650
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 3,9x4x4,2 m

Pressure: 50 t
Working length: 2550 mm
Distance between columns: 2050 mm
Bending power: bei 1 m - bis 10 mm
Space requirement (W x D x H): 2,9 x 1,6 x 2,3 m
Weight of machine: 4200 kg
Total power: 4,5 kW
Condition: very good

hardly used, very good condition, all cylinders are tight, press control type PSSAS

Accessory: Various bending tools, documentation, stand for tools

pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 610 mm
Distance between columns: 1020 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2470 mm
Weight: 2450 kg

pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 610 mm
Distance between columns: 1520 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2470 mm
Weight: 3200 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 500 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Rapid speed: 25 mm/s
Working speed: 2 mm/s
Motor power: 2 kW
Horizontal movable cylinder: 650 mm
Length: 1900 mm
Width: 1000 mm
Height: 2400 mm
Weight: 1250 kg

Punching power: 130 ton
Throat depth: 600 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 50x18 mm
Stroke: 80 mm
Flat steel: 600x18 (max. 600x20 mit Deformation) mm
Angle steel: 120x120x11 (max. 150x150x15 mit Deformation) mm
Round / square steel: 45/40 mm
Notcher: 130x12 mm
Bending unit: 250x12 mm
Motor: 15 kW

Nilpeter FA 2500

Year 2002
6 color

Unwind,
Fife Web Guide Splice Table,
Versatec Web tension Control
6 x Flexo Print Units,
DPL UV Drying system,
Kelva Webcleaner K-15
Hot air dryers
Lamination Unwind,
3 x Rotary Die Slots,
Touch Screen Control,
Slitting Unit
Product Rewind
BST Powerscope digital 4000 Web Inspection Camera,

Tooling:
Print Cylinders
120 z x 6
117 z x 11
113 z x 6
110 z x 6
106 z x 6
102 z x 6
100 z x 6
96 z x 6
93 z x 6
90 z x 6
88 z x 6
84 z x 6
80 z x 6
76 z x 6
74 z x 6
72 z x 6
70 z x 6
68 z x 6
64 z x 6
62 z x 6
60 z x 6
58 z x 6

Mag Cylinders none

Heidelberg SBG 56×77 cm

With safety covers
Year 1964

Heidelberg Printmaster 52-2

Year 2008

Baldwin cooling system
Double-sheet control
Easyplate
Blanked washer
Total impressions: ± 21 mil. imp.

Heidelberg KSB Cilinder

Format 40x57 cm

BuschVacuum pumps, Three vac pumps, models: RA0255 / WV0500 / RA0250, can be bough as a package or individually

Ramon SC13 Sausage filler, 2009, 13L cylinder, comes with two nozzles, mobile, 1Ph

pressing capacity: 10 to
Cylinder fix or moveable: fix
Stroke: 150 mm
Daylight: 850 mm
Distance between columns: 520 mm
Weight: 170 kg

pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1250 mm
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 1500 mm
Rapid speed: 20 mm/s
Approaching speed with foot pedal mode: 10 mm/s
Working speed: 3 mm/s
Table: 1200x700 mm
Upper clamping plate: 1250x400 mm
Length: 2400 mm
Width: 1200 mm
Height: 2800 mm
Weight: 5200 kg

pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 835 mm
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 1050 mm
Rapid speed: 20 mm/s
Approaching speed with foot pedal mode: 10 mm/s
Working speed: 3 mm/s
Table: 1000x700 mm
Upper clamping plate: 1000x400 mm
Length: 2200 mm
Width: 1000 mm
Height: 2700 mm
Weight: 4100 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1250 mm
Stroke: 500 mm
Daylight: 780 mm
Distance between columns: 1500 mm
Rapid speed: 25 mm/s
Approaching speed with foot pedal mode: 10 mm/s
Working speed: 4 mm/s
Table: 1300x600 mm
Upper clamping plate: 1250x400 mm
Length: 2400 mm
Width: 1200 mm
Height: 2450 mm
Weight: 2450 kg

pressing capacity: 70 to
Cylinder fix or moveable: fix
Bending length: 1050 mm
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 900 mm
Rapid speed: 29 mm/s
Approaching speed with foot pedal mode: 10 mm/s
Working speed: 5 mm/s
Table: 800x600 mm
Upper clamping plate: 700x350 mm
Length: 1700 mm
Width: 1000 mm
Height: 2300 mm
Weight: 1400 kg

pressing capacity: 70 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Working speed: max. 9 mm/s
Motor power: 2 kW
Length: 1900 mm
Width: 850 mm
Height: 2250 mm
Weight: 1030 kg

pressing capacity: 50 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 900 mm
Working speed: max. 9 mm/s
Horizontal movable cylinder: 550 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 mm
Weight: 720 kg

pressing capacity: 50 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 900 mm
Working speed: max. 9 mm/s
Length: 1700 mm
Width: 700 mm
Height: 2100 mm
Weight: 650 kg

pressing capacity: 30 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Daylight: 920 mm
Distance between columns: 900 mm
Working speed: max. 9 mm/s
Length: 1600 mm
Width: 700 mm
Height: 2050 mm
Weight: 430 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 835 mm
Stroke: 500 mm
Daylight: 780 mm
Distance between columns: 1050 mm
Rapid speed: 25 mm/s
Approaching speed with foot pedal mode: 10 mm/s
Working speed: 4 mm/s
Table: 800 x 600 mm
Upper clamping plate: 700 x 350 mm
Length: 1800 mm
Width: 1000 mm
Height: 2400 mm
Weight: 2050 kg

pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Working speed: max. 9 mm/s
Motor power: 2 kW
Horizontal movable cylinder: 650 mm
Length: 1950 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1220 kg

Glass VSM150 Mixer, 150Kg glass mixer, tilting for discharge, stainless lid, with vac pump, For marinating and massaging the meat and mixing of liquid, semi-solid and powdery products, mobile, 3Ph

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2430 mm
Weight: 1500 kg

Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames