1
Metal working and machine toolsSheet metal working machines
pressing capacity: 160 to
Stroke: 400 mm
Ram: 1000x680 mm
Table: 1000x750 mm
Daylight: 765 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 22 kW
Length: 2400 mm
Width: 1525 mm
Height: 3900 mm
Weight: 10500 kg
pressing capacity: 160 to
Stroke: 400 mm
Ram: 1000x680 mm
Table: 1000x750 mm
Daylight: 765 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 22 kW
Length: 2400 mm
Width: 1525 mm
Height: 3900 mm
Weight: 10500 kg
Stroke: 400 mm
Ram: 1000x680 mm
Table: 1000x750 mm
Daylight: 765 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 22 kW
Length: 2400 mm
Width: 1525 mm
Height: 3900 mm
Weight: 10500 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 400 mm
Ram: 850x630 mm
Table: 850x640 mm
Daylight: 685 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 11 kW
Length: 2030 mm
Width: 1150 mm
Height: 3565 mm
Weight: 7700 kg
pressing capacity: 100 to
Stroke: 400 mm
Ram: 850x630 mm
Table: 850x640 mm
Daylight: 685 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 11 kW
Length: 2030 mm
Width: 1150 mm
Height: 3565 mm
Weight: 7700 kg
Stroke: 400 mm
Ram: 850x630 mm
Table: 850x640 mm
Daylight: 685 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 11 kW
Length: 2030 mm
Width: 1150 mm
Height: 3565 mm
Weight: 7700 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
pressing capacity: 150 to
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 260 to
Stroke: 500 mm
Table: 1400x1000 mm
Daylight: 600 mm
Rapid speed: 75 mm/s
Working speed: 5 mm/s
Retraction speed: 60 mm/s
Motor: 22 kW
Length: 2800 mm
Width: 1650 mm
Height: 2750 mm
pressing capacity: 260 to
Stroke: 500 mm
Table: 1400x1000 mm
Daylight: 600 mm
Rapid speed: 75 mm/s
Working speed: 5 mm/s
Retraction speed: 60 mm/s
Motor: 22 kW
Length: 2800 mm
Width: 1650 mm
Height: 2750 mm
Stroke: 500 mm
Table: 1400x1000 mm
Daylight: 600 mm
Rapid speed: 75 mm/s
Working speed: 5 mm/s
Retraction speed: 60 mm/s
Motor: 22 kW
Length: 2800 mm
Width: 1650 mm
Height: 2750 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 500 mm
Table: 1250x1000 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 23 mm/s
Working speed: 4 mm/s
Motor: 5.5 kW
Length: 1520 mm
Width: 1270 mm
Height: 2500 mm
pressing capacity: 150 to
Stroke: 500 mm
Table: 1250x1000 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 23 mm/s
Working speed: 4 mm/s
Motor: 5.5 kW
Length: 1520 mm
Width: 1270 mm
Height: 2500 mm
Stroke: 500 mm
Table: 1250x1000 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 23 mm/s
Working speed: 4 mm/s
Motor: 5.5 kW
Length: 1520 mm
Width: 1270 mm
Height: 2500 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 500 mm
Table: 1000x800 mm
Space between columns: 1000x800 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 5 mm/s
Motor: 4 kW
Length: 1260 mm
Width: 1060 mm
Height: 2400 mm
pressing capacity: 100 to
Stroke: 500 mm
Table: 1000x800 mm
Space between columns: 1000x800 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 5 mm/s
Motor: 4 kW
Length: 1260 mm
Width: 1060 mm
Height: 2400 mm
Stroke: 500 mm
Table: 1000x800 mm
Space between columns: 1000x800 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 5 mm/s
Motor: 4 kW
Length: 1260 mm
Width: 1060 mm
Height: 2400 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 300 to
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
pressing capacity: 300 to
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
pressing capacity: 200 to
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 70 to
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 24 mm/s
Working speed: 5 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 2100 kg
pressing capacity: 70 to
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 24 mm/s
Working speed: 5 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 2100 kg
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 24 mm/s
Working speed: 5 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 2100 kg
14
Metal working and machine toolsSheet metal working machines
pressing capacity: 40 to
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1500 kg
pressing capacity: 40 to
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1500 kg
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1500 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2050 mm
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1270 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1350 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1350 kg
Max. bending capacity - mild steel: 5
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1350 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1550 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1270 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1050 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
3
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 150 to
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
pressing capacity: 150 to
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
3
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 100 to
Bending length: 1500 mm
Stroke: 300 mm
Motor power: 7.5 kW
Die: 1
Distance between table and toolholder: 680 mm
Distance between columns: 1520 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 6 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg
pressing capacity: 100 to
Bending length: 1500 mm
Stroke: 300 mm
Motor power: 7.5 kW
Die: 1
Distance between table and toolholder: 680 mm
Distance between columns: 1520 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 6 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg
Bending length: 1500 mm
Stroke: 300 mm
Motor power: 7.5 kW
Die: 1
Distance between table and toolholder: 680 mm
Distance between columns: 1520 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 6 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg
8
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 1.5 °
Back gauge: 1000 mm
Motor power: 22 kW
Length: 3800 mm
Total width with support arm und protection fence: 3600 mm
Height: 2000 mm
Weight: 9800 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 1.5 °
Back gauge: 1000 mm
Motor power: 22 kW
Length: 3800 mm
Total width with support arm und protection fence: 3600 mm
Height: 2000 mm
Weight: 9800 kg
Max. thickness - mild steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 1.5 °
Back gauge: 1000 mm
Motor power: 22 kW
Length: 3800 mm
Total width with support arm und protection fence: 3600 mm
Height: 2000 mm
Weight: 9800 kg
 -1_thumb.jpeg "Show advert")
 -2_thumb.jpeg "Show advert")
 -3_thumb.jpeg "Show advert")
 -4_thumb.jpeg "Show advert")
 -5_thumb.jpeg "Show advert")
 -6 _thumb.jpg "Show advert")
7
Printing machineryStackers
Polar Mohr LW 1000-4 Paper Stack Lift
In very good condition.
Automatic hight adjustment controlled by a photocell or manual mode,.
Load capacity: 1000 kg.
Pallet dimensions: 1200 x 800
Polar Mohr LW 1000-4 Paper Stack Lift
In very good condition.
Automatic hight adjustment controlled by a photocell or manual mode,.
Load capacity: 1000 kg.
Pallet dimensions: 1200 x 800
In very good condition.
Automatic hight adjustment controlled by a photocell or manual mode,.
Load capacity: 1000 kg.
Pallet dimensions: 1200 x 800
7
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 610 mm
Distance between columns: 1020 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2470 mm
Weight: 2450 kg
pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 610 mm
Distance between columns: 1020 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2470 mm
Weight: 2450 kg
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 610 mm
Distance between columns: 1020 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2470 mm
Weight: 2450 kg
6
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 50
Upper roll diameter: 152 mm
Lower roll diameter: 162 mm
Driven rolls: 3
Motor power: 1.1 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 600 mm, 20x10 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 600 mm, 50 x 10 mm / 300 mm
Square bar (section / min. diameter): 35x35 mm / 600 mm, 15x15 mm / 300 mm
Round bar (section / min. diameter): 35 mm / 600 mm, Dm. 20 mm / 300 mm
Tube (section / min. diameter): 70x2 mm / 1200 mm, Dm. 25x1,5 mm / 400 mm, 2"x2,9 mm / 1000 mm, 1/2"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mm
Length: 810 mm
Width: 950 mm
Height: 1500 mm
Weight: 500 kg
Shaft diameter: 50
Upper roll diameter: 152 mm
Lower roll diameter: 162 mm
Driven rolls: 3
Motor power: 1.1 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 600 mm, 20x10 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 600 mm, 50 x 10 mm / 300 mm
Square bar (section / min. diameter): 35x35 mm / 600 mm, 15x15 mm / 300 mm
Round bar (section / min. diameter): 35 mm / 600 mm, Dm. 20 mm / 300 mm
Tube (section / min. diameter): 70x2 mm / 1200 mm, Dm. 25x1,5 mm / 400 mm, 2"x2,9 mm / 1000 mm, 1/2"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mm
Length: 810 mm
Width: 950 mm
Height: 1500 mm
Weight: 500 kg
Upper roll diameter: 152 mm
Lower roll diameter: 162 mm
Driven rolls: 3
Motor power: 1.1 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 600 mm, 20x10 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 600 mm, 50 x 10 mm / 300 mm
Square bar (section / min. diameter): 35x35 mm / 600 mm, 15x15 mm / 300 mm
Round bar (section / min. diameter): 35 mm / 600 mm, Dm. 20 mm / 300 mm
Tube (section / min. diameter): 70x2 mm / 1200 mm, Dm. 25x1,5 mm / 400 mm, 2"x2,9 mm / 1000 mm, 1/2"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mm
Length: 810 mm
Width: 950 mm
Height: 1500 mm
Weight: 500 kg
7
Metal working and machine toolsPressesWorkshop press
pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1020 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2350 mm
Weight: 1985 kg
pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1020 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2350 mm
Weight: 1985 kg
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1020 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2350 mm
Weight: 1985 kg
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 3
No. of driven linkage assemblies: 3
Sheet insertion depth: 1000 mm
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 3
No. of driven linkage assemblies: 3
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 3
No. of driven linkage assemblies: 3
Sheet insertion depth: 1000 mm
4
Metal working and machine toolsPressesEccentric presses
pressing capacity: 100 to
Tonnage rating point: 5 mm
Table length: 1000 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 140 mm
Strokes: 45 - 70 1/min
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 570 mm
Motor: 11 kW
Length: 1320 mm
Width: 2200 mm
Height: 3080 mm
Weight: 10000 kg
pressing capacity: 100 to
Tonnage rating point: 5 mm
Table length: 1000 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 140 mm
Strokes: 45 - 70 1/min
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 570 mm
Motor: 11 kW
Length: 1320 mm
Width: 2200 mm
Height: 3080 mm
Weight: 10000 kg
Tonnage rating point: 5 mm
Table length: 1000 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 140 mm
Strokes: 45 - 70 1/min
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 570 mm
Motor: 11 kW
Length: 1320 mm
Width: 2200 mm
Height: 3080 mm
Weight: 10000 kg
7
Metal working and machine toolsPressesEccentric presses
pressing capacity: 50 to
Tonnage rating point: 3.5 mm
Table length: 800 mm
Table width: 450 mm
Stroke: 22 - 110 mm
Strokes: 60 - 100 1/min
Ram: 70 mm
Ram guides: 8
Ram adjustment: 70 mm
Throat depth: 235 mm
Daylight: 290 mm
Motor: 5.5 kW
Length: 1330 mm
Width: 1000 mm
Height: 2650 mm
Weight: 4500 kg
pressing capacity: 50 to
Tonnage rating point: 3.5 mm
Table length: 800 mm
Table width: 450 mm
Stroke: 22 - 110 mm
Strokes: 60 - 100 1/min
Ram: 70 mm
Ram guides: 8
Ram adjustment: 70 mm
Throat depth: 235 mm
Daylight: 290 mm
Motor: 5.5 kW
Length: 1330 mm
Width: 1000 mm
Height: 2650 mm
Weight: 4500 kg
Tonnage rating point: 3.5 mm
Table length: 800 mm
Table width: 450 mm
Stroke: 22 - 110 mm
Strokes: 60 - 100 1/min
Ram: 70 mm
Ram guides: 8
Ram adjustment: 70 mm
Throat depth: 235 mm
Daylight: 290 mm
Motor: 5.5 kW
Length: 1330 mm
Width: 1000 mm
Height: 2650 mm
Weight: 4500 kg
1
Metal working and machine toolsPressesEccentric presses
pressing capacity: 130 to
Table length: 1000 mm
Table width: 640 mm
Hole in table: 210 mm
Stroke: 5 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 90 mm
Throat depth: 330 mm
Motor: 11 kW
Length: 2200 mm
Width: 1372 mm
Height: 3000 mm
Weight: 8200 kg
pressing capacity: 130 to
Table length: 1000 mm
Table width: 640 mm
Hole in table: 210 mm
Stroke: 5 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 90 mm
Throat depth: 330 mm
Motor: 11 kW
Length: 2200 mm
Width: 1372 mm
Height: 3000 mm
Weight: 8200 kg
Table length: 1000 mm
Table width: 640 mm
Hole in table: 210 mm
Stroke: 5 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 90 mm
Throat depth: 330 mm
Motor: 11 kW
Length: 2200 mm
Width: 1372 mm
Height: 3000 mm
Weight: 8200 kg
1
Metal working and machine toolsSheet metal working machinesNibbling machines
Punching power: 20 ton
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Height: 2310 mm
Weight: 11000 kg
Punching power: 20 ton
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Height: 2310 mm
Weight: 11000 kg
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Height: 2310 mm
Weight: 11000 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1250 mm
Max. thickness - mild steel: 1.5 mm
Back gauge: 500 mm
Length: 2250 mm
Width: 1000 mm
Height: 1150 mm
Weight: 460 kg
Cutting length: 1250 mm
Max. thickness - mild steel: 1.5 mm
Back gauge: 500 mm
Length: 2250 mm
Width: 1000 mm
Height: 1150 mm
Weight: 460 kg
Max. thickness - mild steel: 1.5 mm
Back gauge: 500 mm
Length: 2250 mm
Width: 1000 mm
Height: 1150 mm
Weight: 460 kg
 Nijmegen_thumb.jpg "Show advert")
 -6 _thumb.jpg "Show advert")
2
Printing machineryPost press machinesPile elevators
Polar LW 1000-4 Stack Lift
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
Polar LW 1000-4 Stack Lift
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
2
Metal working and machine toolsLathes
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
3
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 150 mm
Daylight: 780 mm
Distance between columns: 1000 mm
Length: 1900 mm
Width: 1200 mm
Height: 2450 (PSS: 2600) mm
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 150 mm
Daylight: 780 mm
Distance between columns: 1000 mm
Length: 1900 mm
Width: 1200 mm
Height: 2450 (PSS: 2600) mm
Cylinder fix or moveable: fix
Bending length: 150 mm
Daylight: 780 mm
Distance between columns: 1000 mm
Length: 1900 mm
Width: 1200 mm
Height: 2450 (PSS: 2600) mm
3
Metal working and machine toolsPressesWorkshop press
pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 1000 mm
Height: 2250 (PSS: 2400) mm
pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 1000 mm
Height: 2250 (PSS: 2400) mm
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 1000 mm
Height: 2250 (PSS: 2400) mm
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
12
Metal working and machine toolsMilling machinesHorizontal milling machines
RECKERMANN KOMBI 1300 - Heidenhain TNC 114B
-Konsolfräsmaschine mit Einfahrsteuerung TNC114 B (NC-Streckensteuerung)
-Baujahr 1987
-Sehr gepflegter Originalzustand
-Verfahrwege X/Y/Z 1020x320x450mm
-Arbeitstischgröße 1370x400mm
-Horizontal / Vertikalfräseinrichtung
-Vertikalkopf schwenkbar +/- 90 Grad
-Vertikalfräskopf mit Bohrpinole 80mm -Pinolenhub
-Drehzahlbereich - Vertikal 33 - 1800 U/min / 16 Stufen
-Drehzahlbereich - Horizontal 22 - 1200 U/min / 16 Stufen
-Werkzeugaufnahme ISO 50
-Automatische Vorschübe / Eilgänge in allen drei Achsen
-Vorschubgeschwindigkeit X-Achse 10-1000mm/min
-Vorschubgeschwindigkeit Y-Achse 10-1000mm/min
-Vorschubgeschwindigkeit Z-Achse 4-400mm/min
-Antriebsleistung 11KW
-Kühlmitteleinrichtung
-Arbeitsleuchte
-Diverse Fräsdorne + Maschinenbedingtes Zubehör
-Dokumentation
Abmaße:
LxBxH 3,3x2,6x2,1 Meter / Gewicht 4500KG
RECKERMANN KOMBI 1300 - Heidenhain TNC 114B
-Konsolfräsmaschine mit Einfahrsteuerung TNC114 B (NC-Streckensteuerung)
-Baujahr 1987
-Sehr gepflegter Originalzustand
-Verfahrwege X/Y/Z 1020x320x450mm
-Arbeitstischgröße 1370x400mm
-Horizontal / Vertikalfräseinrichtung
-Vertikalkopf schwenkbar +/- 90 Grad
-Vertikalfräskopf mit Bohrpinole 80mm -Pinolenhub
-Drehzahlbereich - Vertikal 33 - 1800 U/min / 16 Stufen
-Drehzahlbereich - Horizontal 22 - 1200 U/min / 16 Stufen
-Werkzeugaufnahme ISO 50
-Automatische Vorschübe / Eilgänge in allen drei Achsen
-Vorschubgeschwindigkeit X-Achse 10-1000mm/min
-Vorschubgeschwindigkeit Y-Achse 10-1000mm/min
-Vorschubgeschwindigkeit Z-Achse 4-400mm/min
-Antriebsleistung 11KW
-Kühlmitteleinrichtung
-Arbeitsleuchte
-Diverse Fräsdorne + Maschinenbedingtes Zubehör
-Dokumentation
Abmaße:
LxBxH 3,3x2,6x2,1 Meter / Gewicht 4500KG
-Konsolfräsmaschine mit Einfahrsteuerung TNC114 B (NC-Streckensteuerung)
-Baujahr 1987
-Sehr gepflegter Originalzustand
-Verfahrwege X/Y/Z 1020x320x450mm
-Arbeitstischgröße 1370x400mm
-Horizontal / Vertikalfräseinrichtung
-Vertikalkopf schwenkbar +/- 90 Grad
-Vertikalfräskopf mit Bohrpinole 80mm -Pinolenhub
-Drehzahlbereich - Vertikal 33 - 1800 U/min / 16 Stufen
-Drehzahlbereich - Horizontal 22 - 1200 U/min / 16 Stufen
-Werkzeugaufnahme ISO 50
-Automatische Vorschübe / Eilgänge in allen drei Achsen
-Vorschubgeschwindigkeit X-Achse 10-1000mm/min
-Vorschubgeschwindigkeit Y-Achse 10-1000mm/min
-Vorschubgeschwindigkeit Z-Achse 4-400mm/min
-Antriebsleistung 11KW
-Kühlmitteleinrichtung
-Arbeitsleuchte
-Diverse Fräsdorne + Maschinenbedingtes Zubehör
-Dokumentation
Abmaße:
LxBxH 3,3x2,6x2,1 Meter / Gewicht 4500KG
6
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 60
Rolls diameter: 177 mm
Driven rolls: 3
Motor power: 3.7 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 70x10 mm / 600 mm, 30x10 mm / 250 mm
Flat steel horizontal position (section / min. diameter): 90x25 mm / 500 mm, 50x5 mm / 250 mm
Square bar (section / min. diameter): 40x40 mm / 500 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø. 40 mm / 500 mm, Ø 20 mm / 300 mm
Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 20x1 / 250 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm
Form tube square (section / min. diameter): 60x60x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x5 mm / 1.000 mm, 30x4 mm / 350 mm
Angle leg inside (section / min. diameter): 50x5 mm / 500 mm, 30x3 mm / 250 mm
Length: 1160 mm
Width: 1000 mm
Height: 1175 mm
Weight: 1194 kg
Shaft diameter: 60
Rolls diameter: 177 mm
Driven rolls: 3
Motor power: 3.7 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 70x10 mm / 600 mm, 30x10 mm / 250 mm
Flat steel horizontal position (section / min. diameter): 90x25 mm / 500 mm, 50x5 mm / 250 mm
Square bar (section / min. diameter): 40x40 mm / 500 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø. 40 mm / 500 mm, Ø 20 mm / 300 mm
Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 20x1 / 250 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm
Form tube square (section / min. diameter): 60x60x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x5 mm / 1.000 mm, 30x4 mm / 350 mm
Angle leg inside (section / min. diameter): 50x5 mm / 500 mm, 30x3 mm / 250 mm
Length: 1160 mm
Width: 1000 mm
Height: 1175 mm
Weight: 1194 kg
Rolls diameter: 177 mm
Driven rolls: 3
Motor power: 3.7 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 70x10 mm / 600 mm, 30x10 mm / 250 mm
Flat steel horizontal position (section / min. diameter): 90x25 mm / 500 mm, 50x5 mm / 250 mm
Square bar (section / min. diameter): 40x40 mm / 500 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø. 40 mm / 500 mm, Ø 20 mm / 300 mm
Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 20x1 / 250 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm
Form tube square (section / min. diameter): 60x60x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x5 mm / 1.000 mm, 30x4 mm / 350 mm
Angle leg inside (section / min. diameter): 50x5 mm / 500 mm, 30x3 mm / 250 mm
Length: 1160 mm
Width: 1000 mm
Height: 1175 mm
Weight: 1194 kg
7
Metal working and machine toolsPressesWorkshop press
pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Working speed: max. 9 mm/s
Motor power: 2 kW
Horizontal movable cylinder: 650 mm
Length: 1950 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1220 kg
pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Working speed: max. 9 mm/s
Motor power: 2 kW
Horizontal movable cylinder: 650 mm
Length: 1950 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1220 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Working speed: max. 9 mm/s
Motor power: 2 kW
Horizontal movable cylinder: 650 mm
Length: 1950 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1220 kg
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
-6._thumb.jpeg "Show advert")
10
Printing machineryPost press machinesBinding machines
ang 470 PLC Ring Binder & Lever arch Assembly Line
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
ang 470 PLC Ring Binder & Lever arch Assembly Line
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
13
Food machinesMeat processing
Fryma Koruma MS65 Ball Mill, Serial: 102333, 2014, Stainless contact parts, 316 SS, double jacketed, previously running on nut butters at 1000 litres per hour, Siemens HMI touch screen controls, 3Ph
Fryma Koruma MS65 Ball Mill, Serial: 102333, 2014, Stainless contact parts, 316 SS, double jacketed, previously running on nut butters at 1000 litres per hour, Siemens HMI touch screen controls, 3Ph
5
Food machinesFruit and vegetable machinesVacuum processing systems
Polar Tumbling drum 2017, Stainless, flavouring drum, overall length 2000mm, drum diameter 1000mm, 3Ph
Polar Tumbling drum 2017, Stainless, flavouring drum, overall length 2000mm, drum diameter 1000mm, 3Ph
9
Metal working and machine toolsPressesEccentric presses
pressing capacity: 100 to
Tonnage rating point: 4.5 mm
Table length: 700 mm
Table width: 1000 mm
Hole in table: 210 mm
Stroke: 1 - 132 mm
Strokes: 58 1/min
Ram guides: 6
Ram adjustment: 90 mm
Ram hole: 60 mm
Throat depth: 300 mm
Daylight: 445 mm
Motor: 7.5 kW
Length: 1650 mm
Width: 1545 mm
Height: 3011 mm
Weight: 7000 kg
pressing capacity: 100 to
Tonnage rating point: 4.5 mm
Table length: 700 mm
Table width: 1000 mm
Hole in table: 210 mm
Stroke: 1 - 132 mm
Strokes: 58 1/min
Ram guides: 6
Ram adjustment: 90 mm
Ram hole: 60 mm
Throat depth: 300 mm
Daylight: 445 mm
Motor: 7.5 kW
Length: 1650 mm
Width: 1545 mm
Height: 3011 mm
Weight: 7000 kg
Tonnage rating point: 4.5 mm
Table length: 700 mm
Table width: 1000 mm
Hole in table: 210 mm
Stroke: 1 - 132 mm
Strokes: 58 1/min
Ram guides: 6
Ram adjustment: 90 mm
Ram hole: 60 mm
Throat depth: 300 mm
Daylight: 445 mm
Motor: 7.5 kW
Length: 1650 mm
Width: 1545 mm
Height: 3011 mm
Weight: 7000 kg
5
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
Saw frame: Double column
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
2
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 110 ton
Max. diameter at sheet thickness (mild steel): 4-30 mm
Punching power: 110 ton
Max. diameter at sheet thickness (mild steel): 4-30 mm
Max. diameter at sheet thickness (mild steel): 4-30 mm
2
Metal working and machine toolsSheet metal working machinesBending machines
Bending length: 350 - 2800 mm
Max. sheet length: 3050 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 500 to
Pressure force: 1000 to
Sheet thickness (420 N/mm²): 3.2 mm
Sheet thickness (600 N/mm²): 2.2 mm
Sheet thickness (260 N/mm²): 4 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Bending length: 350 - 2800 mm
Max. sheet length: 3050 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 500 to
Pressure force: 1000 to
Sheet thickness (420 N/mm²): 3.2 mm
Sheet thickness (600 N/mm²): 2.2 mm
Sheet thickness (260 N/mm²): 4 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Max. sheet length: 3050 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 500 to
Pressure force: 1000 to
Sheet thickness (420 N/mm²): 3.2 mm
Sheet thickness (600 N/mm²): 2.2 mm
Sheet thickness (260 N/mm²): 4 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
7
Metal working and machine toolsDeburring machines
Working width: 1300
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
Working width: 1300
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1030 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1030 mm
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1030 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 6080 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2,5 °
Number of downholders: 29 pcs.
Pressure of downholder: 58 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 400 l
Support arms: 6 pcs.
Table height: 950 mm
Table width: 650 mm
Table length: 6375 mm
Length: 7400 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2900 mm
Weight: 33820 kg
Cutting length: 6080 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2,5 °
Number of downholders: 29 pcs.
Pressure of downholder: 58 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 400 l
Support arms: 6 pcs.
Table height: 950 mm
Table width: 650 mm
Table length: 6375 mm
Length: 7400 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2900 mm
Weight: 33820 kg
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2,5 °
Number of downholders: 29 pcs.
Pressure of downholder: 58 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 400 l
Support arms: 6 pcs.
Table height: 950 mm
Table width: 650 mm
Table length: 6375 mm
Length: 7400 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2900 mm
Weight: 33820 kg