Planscheibendurchmesser: 4000 mm
Umlaufdurchmesser: 4300 mm
Drehhöhe: 1750 mm
Supportverstellung: 1000 mm
Tischbelastung: 18 t
Drehzahl: 1-92 U/min
Steuerung: Siemens
Typ: 840 D mm
Support: 2
Stößelabmessungen: 250x250 mm
Vorschub: 1-4000 mm/min
Hauptgetriebemotor: 55 kW
Gesamtleistungsbedarf: 85 KVA
Maschinengewicht ca.: 64 t
Raumbedarf ca.: 8x5,8x8 m

Planscheibendurchmesser: 3500 mm
Umlaufdurchmesser: 4100 mm
Drehhöhe: 3100 mm
Steuerung: Siemens
Typ: 840 D
Stößelabmessungen: 250x250 mm
Querbalken - Verstellung: 2000 mm
Stößelverstellung: 1745 mm
Antriebsleistung: 100 kW
Drehzahl: 34,6 U/min

Drehdurchmesser: 500 mm
Drehlänge: 1500 mm
Steuerung: Masturn CNC 50
Drehdurchmesser über Support: 380 mm
Drehzahl: 2-2400 U/min
Dreibackenfutter: SMW
Dreibackenfutter Durchmesser: 270 mm
Bettbreite: 320 mm
Gesamtleistungsbedarf: 53 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 3x1,5x1,5 m

Table size: 260 x 260 mm
Speed range: 380/725/960/1390/2080 rpm
Taper fixture: MK2
Quill ram: 70 mm
Drilling performance: 20 mm
Total power: 0,8 kW
Weight of machine: 105 kg
Space requirement (W x D x H): 1,0 x 0,3 x 1,0 m
Condition: sehr gut

Drill chuck - 16 mm, well-maintained machine, little used

Accessory: no additional accessories

X: 400 mm
Y: 500 mm
Z: 450 mm
Table size: 580 x 560 mm
Speed range: 9.000 / 16.000 rpm
Tool changer: 20 -station
Tool holder: HSK-A 63
Chip conveyor: yes
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Speed range main spindle: 16000 rpm
Feed force x/y axis: 3500 N
Rapid traverse X/Y axis: 35 mtr/min
Rapid traverse Z axis: 30 mtr/min
Feed range z axis: 4200 N
Control: Heidenhain TNC 426
Total power: 25 kW
Weight of machine: 5500 kg
Space requirement (W x D x H): 3,5 x 1,4 x 2,6 m

Punching power: 110 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg

Bending length: 1550 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 180 mm
Lower roll diameter: 180 mm
Lateral roll diameter: 150 mm
Bending speed: 1,5 / 6 m/min
Motor power: 5.5 kW
Length: 3900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 3250 kg

Length: 835 mm

Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 420 mm
Cutting capacity 0° square: 420 mm
Cutting capacity 0° flat: 420 x 420 mm
Working height: 805 mm
Hydraulic motor: 1.1 kW
Motor: 5.5 kW
Servomotor: 1 kW
Coolant pump motor: 0.12 kW
Length: 2860 mm
Width: 1980 mm
Height: 2100 mm
Weight: 3700 kg

Bending length: 2040 mm
Sheet thickness (420 N/mm²): 3 mm
Max. thickness - stainless steel: 2 mm
Max. thickness - aluminium: 4.5 mm
Antrieb: Motorized
Motor bending beam: 1.5 kW
Upper beam motor: 1.1 kW
Back gauge: 750 mm
Opening of upper beam: 140 mm
Bending speed: 50 °/sek
Length: 3060 mm
Width: 1650 mm
Height: 1500 mm
Weight: 2730 kg

Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm

Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 250 mm
Revs: 245 - 4000 r.p.m.
Tapping capacity: M25
max. drilling depth: 120 mm
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.195 mm
Table: 300 x 270 mm
Base dimensions: 600 x 380 mm
Length: 400 mm
Width: 655 mm
Height: 1185 mm
Weight: 280 kg

Saw frame: Double column
Band dimensions: 5000 x 34 x 1,1 mm mm
Band speed continous: 20 - 120 m/min
Cutting capacity 0° round: 330 mm
Cutting capacity 0° square: 330 mm
Cutting capacity 0° flat: 350 x 330 mm
Working height: 845 mm
Hydraulic motor: 1.1 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2815 mm
Width: 1935 mm
Height: 1855 mm
Weight: 2560 kg

Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 520 x 460 mm
Working height: 585 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1650 kg

Punching power: 55 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg

Punching power: 110 ton
Throat depth: 300 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x20 (28x28) mm
Stroke: 80 mm
Strokes: 17 1/min
Flat steel: 600x15 (400x20) mm
Blade length: 605 mm
Angle steel: 152x152x13 mm
Round / square steel: 50/50 mm
Notcher: 90x52x13 mm
Motor: 5 kW
Length: 2130 mm
Width: 1200 mm
Height: 2200 mm
Weight: 2500 kg

Saw frame: Pivot frame
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 610x440 mm
Cutting capacity 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity 60°: rund 320 mm, quadrat 250 mm, rechteck 250 x 440 mm
Cutting capacity - 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity - 60°: rund 320 mm, quadrat 285 mm, rechteck 285 x 440 mm
Working height: 860 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1540 kg

Sheet Thickness - mild steel: 0.6 - 4 mm
Max. sheet width: 300 mm
Max. cross-section: 900 mm
Feed roll diameter: 80 mm
Motor torque: 10 Nm
Motor: 2.62 kW
Length: 1000 mm
Width: 800 mm
Height: 1400 mm
Weight: 330 kg

Working width: 650
Sheet thickness range - mild steel: 0,5 - 170 mm
Grinding belt dimensions: 670 x 2200 mm
Suction capacity: 4000 m³/h
Connection for dust collector diam.: 120 mm
Air connection: 6 bar
Noise level: 83 dB
Motor: 22 kW
Length: 2600 mm
Width: 1350 mm
Height: 2100 mm
Weight: 1125 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg

Cutting length: 4100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg

Cutting length: 4100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg

Max. thickness - mild steel: 4 mm
Throat depth: 200 mm
Shaft length: 300 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Revs: 10 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 460 kg

Max. thickness - mild steel: 2.5 mm
Throat depth: 160 mm
Shaft length: 250 mm
Tools: 4 pcs.
Rolls diameter: 96 mm
Revs: 13 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 320 kg

Tube diameter: 1/4", 3/8", 1/2"
Weight: 4 kg

Tube diameter: 1½" 48,3 mm, 2" 60,3 mm
Max. wall thickness: 3 mm
Max. wall thickness stainless steel: 2.5 mm
Weight: 15 kg

Tube diameter: 1¼" 42,4, 1½" 48,3 mm
Max. wall thickness: 3 mm
Max. wall thickness stainless steel: 2.5 mm
Weight: 15 kg

Tube diameter: 3/4" 26,9 mm, 1" 33,7 mm, 1¼" 42,4 mm
Max. wall thickness: 3 mm
Max. wall thickness stainless steel: 2.5 mm
Weight: 8 kg

Tube diameter: 20 - 76,1
Max. wall thickness: 3 mm
Max. wall thickness stainless steel: 2.5 mm
Weight: 7 kg

Tube diameter: 3/4" 26,9 mm, 1" 33,7 mm, 1¼" 42,4 mm, 1½" 48,3 mm, 2" 60,3 mm
Max. wall thickness: 5 mm
Max. wall thickness stainless steel: 3 mm
Weight: 93 kg

Working area: 1250x2500 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: 1/10 mm
Volume water tray:: 470 lt
Max. weight on table: 500 kg/m²
Length: 3060 mm
Width: 1760 mm
Height: 1500 mm
Weight: 500 kg

Working area: 1000x2000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg

Working area: 2000x6000 mm
Plasma source: Hypertherm XPR 170 CORE
Max. thickness - mild steel: 60 mm
Max. thickness - stainless steel: 38 mm
Max. thickness - aluminium: 38 mm
Max. piercing thickness - mild steel: 35 mm
Max. piercing thickness - stainless steel: 22 mm
Max. piercing thickness - aluminium: 25 mm
Current: 170 A
Max. cutting speed: 12 m/min
Positioning speed: 35 m/min
Weight: 6000 kg

pressing capacity: 150 to
Stroke: 300 mm
Ram: 950x650 mm
Table: 1200x750 mm
Daylight: 550 mm
Rapid speed: 100 mm/s
Working speed: 5 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Length: 2200 mm
Width: 2200 mm
Height: 3250 mm
Weight: 8200 kg

Swing over bed: 1020 mm
Distance between centers: 2000 mm
Centre height: 510 mm
Spindle bore: 358 mm
swing over cross slide: 770 mm
Width of bed: 560 mm
Spindle taper: 361 M
Spindle speed steps: 12
Spindle revs: 6,3 - 315 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 505 mm
Top slide travel: 270 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 18 kW
Weight: 6400 kg

Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 260 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6000 kg

pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg

Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm

pressing capacity: 300 to
Stroke: 500 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 1750 mm
Width: 1500 mm
Height: 2800 mm

pressing capacity: 200 to
Stroke: 500 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 25 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 1550 mm
Width: 1300 mm
Height: 2700 mm

Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 315 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6100 kg

Weight of machine: 7 kg

Height adjustable, 3 pieces available, height 0.94 m

Weight of machine: 10 kg

Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg

Travel distances 1575 x 560, overhauled by Wema Service in 2012

Accessory: balancing device, 4 grinding wheels, 2 holders

Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg

little used, from a workshop for the disabled, travel distances 750 x 350

Accessory: balancing device, 1 grinding wheel, 2 holders

Schleifdurchmesser: 300 mm
Schleiflänge: 600 mm
Werkstückgewicht: 80 kg
Schleifscheibendurchmesser: 508 mm
Steuerung: Siemens
Typ: 840 C
Schleifspindeldrehzahl: 45 m/s
Antriebsleistung - Schleifmotor: 7,5 kW
z-Achse: 865 mm
x-Achse: 250 mm
Spitzenweite: 1000 mm
Spindelstockdrehzahl: 1-800 U/min
Gesamtleistungsbedarf: KVA
Maschinengewicht ca.: 4,85 t
Raumbedarf ca.: m

x-Weg: . mm
y-Weg: . mm
z-Weg: . mm
Steuerung: Siemens
Typ: 840 D
Palettengröße: mm
Drehtisch: °
Drehzahl: U/min
Tischbelastung: kg
Spindelaufnahme ISO: 50
Werkzeugwechsler: Pos.
Vorschub: mm/min
Kühlung durch die Spindel: bar
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: . mm
y-Weg: . mm
z-Weg: . mm
Steuerung: Siemens
Typ: 840 D
Palettengröße: mm
Drehtisch: °
Drehzahl: U/min
Tischbelastung: kg
Spindelaufnahme ISO: 50
Werkzeugwechsler: Pos.
Vorschub: mm/min
Kühlung durch die Spindel: bar
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m