G&N Kugelmüller MPS 1 Topfschleifmaschine

-Spindeldrehzahl 3150 U/min
-Schleifhöhe über Magnet 130mm
-Magnetplatte 200x100mm
-Seitliche Schleifscheibenabzieheinrichtung
-Feinzustellung
-Baujahr 1996
-Antriebsmotor 0,6KW
-Maschinenumhausung
-Gepflegter Originalzustand

Abmaße:
LxBxH 0,8x0,7x1,6 Meter / Gewicht 150Kg

FORTE SBA 240 - Bandsägevollautomat / 2x Säulengeführt

-Schnittdurchmesser 250mm
-Schnittgeschwindigkeit 10-70 M/min
-Mehrfachvorschub
-Sägebandlänge 3660x27x0,9mm
-Gesamtleistungsbedarf 3 KW
-Kühlmitteleinrichtung
-Maschinenfüße
-Dokumentation

Abmaße:
LxBxH 2x1,7x1,6 Meter / Gewicht 1000Kg

Flachschleifmaschine ELB SWB06-VAII

-Schleiflänge 600mm
-Schleifbreite 500mm
-Spindeldrehzahl 1400/2800 U/min
-Z - Zustellung / Automatisch / Manuell
-Y - Zustellung / Automatisch / Manuell
-Schleifbewegung / Automatisch / Manuell
-Magnetgröße 600x500mm
-Automatische Zustellung
-Schleifscheiben - Abzieheinrichtung
-Schleifscheibendurchmesser max. 300mm
-Kühlmitteleinrichtung
-Antriebsleitung ca. 6 KW

Abmaße:
LxBxH 2,6x2,2x2,5 Meter / Gewicht 3500Kg

ECKOLD KF 653 C - Kraftformer

-Ausladung - horizontal ca. 600mm
-Ausladung - vertikal ca. 480mm
-Arbeitshub 8mm
-Stößelverstellung ca. 80mm
-Fußschalter
-1xWerkzeug
-Umformbare Blechdicken:
-Stahl (400 N/mm2) max. 6mm
-Aluminium (250 N/mm2) 8mm
-Edelstahl ( 600 N/mm2) 4mm

Abmaße:
LxBxH 1,6x0,7x1,9 Meter / Gewicht 1770Kg

pressing capacity: 40 to
Tonnage rating point: 2.6 mm
Table length: 650 mm
Table width: 380 mm
Hole in table: 120 mm
Stroke: 8 - 78 mm
Strokes: 145 1/min
Ram guides: 6
Ram adjustment: 60 mm
Ram hole: 40 mm
Throat depth: 195 mm
Daylight: 297 mm
Table height: 800 mm
Motor: 3 kW
Length: 1450 mm
Width: 1150 mm
Height: 2150 mm
Weight: 2200 kg

. - basic machine - 15 stations gatherer - sheet control - transfer unit . - 1st sewing machine Aster 2000 - pre-loader - sheet control - opening unit 4+4 - sewing unit device - tread cutting device - stacker . - 2nd sewing machine Aster 2000 - pre-loader - sheet control - opening unit 4+4 - sewing unit device - tread cutting device - stacker - technical documentation

- basic machine
- in-feed (Vacubelt)
- Vacutable
- 4 pockets in 1st folding unit
- anti noise hood
- knife folding in second unit
- knife a...

- in feed
- pressing device
- jogging device
- banding device
- delivery table
- technical documentation

- in feed belt
- thickness measurement
- end sheet tipping stations
- cold glue side gluing
- hot melt spine gluing
- cold glue side gluing...

- set-up panel
- glue tanks
- glue rollers
- casing-in sword
- pressing unit
- set-up panel
- technical documentation

- in-feed
- milling station
- hotmelt side gluing
- hotmelt spine gluing
- cover feeder
- delivery
- technical documentation

- basic machine
- coloured touch screen
- Sistema pre-loading
- in-feed
- magazine
- transport device
- sewing device
- delivery
- stack...

- standard machine
- technical documentation

- standard machine with only 7,4 million imprints
- technical documentation
.
- incl. one pallet consumables.(not sorted!!!)

- basic machine
- coloured touch screen (new)
- magazine
- openings device
- transport chain
- sewing device
- thread cutting device
- de...

Shaft diameter: 50 - 60
Upper roll diameter: 180 mm
Rolls diameter: 180 mm
Lower roll diameter: 180 mm
Driven rolls: 3
Motor power: 3.75 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 20x5 mm / 250 mm
Flat steel horizontal position (section / min. diameter): 80x20 mm / 500 mm, 50x5 mm / 250 mm
Square bar (section / min. diameter): 32x32 mm / 400 mm, 12x12 mm / 250 mm
Round bar (section / min. diameter): Ø 35 mm / 350 mm, Ø 10 mm / 250 mm
Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 15x1,5 mm / 200 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x25x3 mm / 450 mm, 20x15x2 mm / 250 mm
Form tube square (section / min. diameter): 45x3 mm / 600 mm, 20x2 mm / 300 mm
Angle leg outside (Querschnitt / min. Durchmesser): 60x60x6 mm / 650 mm, 30x30x4 mm / 350 mm
Angle leg inside (section / min. diameter): 50x50x5 mm / 550 mm, 30x30x4 mm / 350 mm
UPN leg outside (section / min. diameter): UPN 80 / 600 mm, UPN30 / 250 mm
UPN leg inside (section / min. diameter): UPN 65 / 600 mm, UPN 30 / 250 mm
IPN horizontal position (section / min. diameter): IPN 80 / 600 mm
Length: 1200 mm
Width: 850 mm
Height: 1200 mm
Weight: 955 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2430 mm
Weight: 1500 kg

Punching power: 60 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg

Drilling capacy mild steel: 23 mm
Taper: 19 mm Weldon
Motor power: 1.15 kW
Max. drilling capacity: 23 mm
Max. core drill capacity: 50 mm
Max. cutting depth: 50 mm
Stroke: 160 mm
Motor speed: 240 / 480 rpm
Min. workpiece thickness: 6 mm
Length: 331 mm
Width: 254 mm
Height: 456 mm
Weight: 155 kg

Drilling capacy mild steel: 12 mm
Taper: 19 mm Weldon
Motor power: 1.1 kW
Max. drilling capacity: 12 mm
Max. core drill capacity: 40 mm
Max. cutting depth: 40 mm
Stroke: 45 mm
Motor speed: 370 rpm
Min. workpiece thickness: 6 mm
Length: 400 mm
Width: 126 mm
Height: 185 mm
Weight: 10 kg

Drilling capacy mild steel: 25 mm
Taper: 19 mm Weldon
Motor power: 1.6 kW
Tapping capacity: M20
Max. drilling capacity: 25 mm
Max. core drill capacity: 70 mm
Max. cutting depth: 75 mm
Stroke: 190 mm
Motor speed: 120-190 / 290-450 rpm
Min. workpiece thickness: 8 mm
Length: 266 mm
Width: 259 mm
Height: 505 mm
Weight: 18 kg

Drilling capacy mild steel: 23 mm
Taper: 19 mm Weldon
Motor power: 1.6 kW
Tapping capacity: M20
Max. drilling capacity: 23 mm
Max. core drill capacity: 50 mm
Max. cutting depth: 75 mm
Stroke: 190 mm
Motor speed: 160 - 250 / 390 - 580 rpm
Min. workpiece thickness: 8 mm
Length: 266 mm
Width: 259 mm
Height: 500 mm
Weight: 17 kg

Taper: 19 mm Weldon
Motor power: 1 kW
Max. core drill capacity: 36 mm
Max. cutting depth: 51 mm
Stroke: 70 mm
Motor speed: 350 rpm
Min. workpiece thickness: 6 mm
Length: 307 mm
Width: 221 mm
Height: 317 mm
Weight: 135 kg

Drilling capacy mild steel: 12 mm
Taper: 19 mm Weldon
Motor power: 0.4 kW
Max. drilling capacity: 12 mm
Max. core drill capacity: 36 mm
Max. cutting depth: 50 mm
Stroke: 70 mm
Motor speed: 260 rpm
Min. workpiece thickness: 6 mm
Length: 361 mm
Width: 238 mm
Height: 352 mm
Weight: 145 kg

Drilling capacy mild steel: 12 mm
Taper: 19 mm Weldon
Motor power: 0.1 kW
Max. drilling capacity: 12 mm
Max. core drill capacity: 36 mm
Max. cutting depth: 51 mm
Stroke: 70 mm
Motor speed: 350 rpm
Length: 175 mm
Width: 250 mm
Height: 312 mm
Weight: 10 kg

Drilling capacy mild steel: 12 mm
Taper: 19 mm Weldon
Motor power: 0.45 kW
Max. drilling capacity: 12 mm
Max. core drill capacity: 36 mm
Max. cutting depth: 50 mm
Stroke: 70 mm
Motor speed: 260 rpm
Min. workpiece thickness: 6 mm
Length: 316 mm
Width: 235 mm
Height: 328 mm
Weight: 115 kg

Jaw opening: 100 mm
jaw height: 40 mm
Opening of upper beam: 108 mm
Weight: 13 kg

Metal Bending Machine LVD PPEB 80/25 MNC 95 1998

Danobat R2-1500-CNC grinding machine 2000

Kodak NEXPRESS SX3300 Press long-sheet feeder, 2010

Cutting length: 3050 mm
Max. thickness - mild steel: 6 mm
Strokes: 11 - 25 1/min
Cutting angle: 0.5 - 3 °
Number of downholders: 18 pcs.
Back gauge: 750 mm
Motor power: 11 kW
Working height: 770 mm
Length: 3850 mm
Width: 1750 mm
Height: 1720 mm
Weight: 4600 kg