Woods 56JM/20/4/6/10-36 flow extract fan, Year 2021, 560mm fan diameter, 1420 rev/min, see plate for spec, 5 in stock, 3Ph

Hache 1720E Turbidimeter, Hach 1720E Continuous-reading Nephelometric Low Range Process Turbidimeter, Continuously flowing sample flows through the patented bubble removal system, which vents entrained air from the sample stream and eliminates the most significant interference in low level turbidity measurement. The 1720E Turbidimeter is not affected by variations in flow and pressure, The 1720E Turbidimeter uses the sc200 Controller to receive data from up to two sensors. A built-in data logger collects turbidity measurement at user selectable intervals (1-15 minutes), along with calibration and verification points, alarm history, and instrument setup changes for 6 months.

Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals

Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available

Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph

AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes

Kaeser SX3T Compressor, Serial: 2268, 2010, 2.2Kw, 11.0Bar, 3Ph

Kaeser SX3T Compressor, Serial: 2266, 2010, 2.2Kw, 11.0Bar, 3Ph

Hydrovane HV02 Air compressor, Air compressor, 11Bar, 2.2Kw, 75L tank, 3Ph

Protech three station sinks, Stainless, wall mounted sinks, knee operated, three available

NNP Stainless racking, Stainless racking, various sizes

NNP Stainless boot rack, Stainless boot rack station, 24 pairs per rack, two racks available, mobile

Alfa Laval TS6MFG Plate heat exchanger, Serial: 30107, 2011, see plate for full spec

Sondex S22FG10 Plate heat exchanger, Serial: DIR67234, 2015, stainless plate heat exchanger, normal capacity 600Kw, Max temp 100'C see plate for all spec

Hydrovane HV04 air compressor, Serial: 504020750, 2019, 4Kw, Max Bar 11, RPM 1455, 3Ph, comes with receiver and BEKO drypoint RA dryer,

Euroventilatori XTTRC801LG0 Centrifugal fan, High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph

Robuschi ES55/2P-RVP80-CAR Blower, Serial: 4001, Air blower, in box, 30Kw, 3Ph

Agnelli Automatic sheeter, Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph

Axtel GM-7L Rotary piston blower, Rotary piston blower, 5.5Kw motor, 3Ph

Aksar Hopper and screw feed, Stainless, 15Kg hopper with stainless screw, screw length 700mm, screw diameter 50mm, mobile, 1Ph

Advecto Handwash station, Stainless handwash station, knee operated, with sink

NNP Stainless rack Stainless rack, 7 tiers, 3 in stock

Syspal Stainless sinks, a variety of stainless sinks, freestanding, single station and two station with knee operated

AWE Boot scrubber 2021, Stainless boot scrubbing station, 1Ph

Fitzpatrick L1A Fitzmill, 2006, stainless, duel sided knives, 150mm rounded cutting chamber, for wet and dry produce, two boxes of spare parts, mounted on mobile frame

Dynomill Multilab Bead mill, 2006, 3.3Kw, tabletop bead mill, ideal for wet ultrafine grinding and dispersion, 3Ph

Redhill MDC11 Drum claw, Drum claw forklift attachment, safe working load 250Kgs

Redhill MDC1 Drum clamp, Drum handling clamp attachment for forklift, safe working load 500Kgs

Tricool SHK509A Thermal oil heater, Sheik Thermal oil heater, adjustable digital controls, up to 350'C, mobile

Nilfisk CTS40-LZ22 Industrial vacuum cleaner, 2008, industrial vac cleaner, 4Kw rated, mobile, 3Ph

Jungheinrich EFG216K Forklift truck, Serial: FN492262, Electric forklift, max lift 1500Kgs, treble mast, with charger

Jungheinrich EJE116 Electric pallet truck, Electric pallet truck, load capacity 1600Kgs, forks 1150mm, with spare battery

Nilfisk BA551D Floor scrubber, Walk behind scrubber dryer, perfect for floor cleaning,

Jungheinrich EFG216 Forklift truck, Serial: FN319410, 2005, Electric forklift, max lift 1500Kgs, treble mast

Jungheinrich EJC112RK electric pallet stacker, Serial: 91566647 Robust and handy pallet stacker, electric, narrow working width, easy charge 1Ph socket, lifts up to 1200Kgs, max left height 3200mm, with charger

Fluidair RPK47 Air compressor, Serial:41449, Rotary air compressor, working pressure 100PSI, Discharge pressure 8Bar, with fluidair rotastar control, 3Ph

Arsopi CH01-MP2C-72 Plate heat exchanger, Serial: 12641TH, 2015, See plate for full spec

Beko Clearpoint V carbon adsorber, 2017, Type - L225VWM, temp -10'C to 60'C, inlet pressure 0/16Bar, operating pressure 7Bar, max volume flow 380Nm3/h

Ingersoll Rand D480IN-A Refrigerated air dryer, 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Ingersoll Rand D480IN-A Refrigerated air dryer, 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Kaeser SK26 Air compressor, Serial: 2613172 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

Kaeser SK26 Air compressor, Serial: 265125, Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Kaeser SK26 Air compressor, Serial:2610493, Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

Kaeser SK26 Air compressor, Serial: 264957, Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Koppens BVE400HD Former, Stainless Koppens forming machine, comes with lots of different forming plates for different size products, previously used for hamburgers, belt 400mm, variable speed, up to 50 cycles per min, 3Ph

NNP Stainless trolleys 2 x stainless trolleys, platform 800mm x 500mm, mobile

NNP Hopper and screw feed, Stainless, 1000Kg hopper, discharge screw, screw diameter 200mm, screw length 2800mm

Kaeser SK26 Air compressor, serial: 2610494, Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph

This Gimret UHT system is a continuous installation for sterilizing by heating, to ensure that a prepared liquid mixture is free from bacterial endospores, the mixture is passed through a sterilizer prior to the drying process. To obtain a continuous flow in the sterilizer, the material is first accommodated in a buffer tank from which the sterilizer is fed by using a dosing pump (low pressure). To kill the bacterial endospores a temperature of at least 135°C is required for a period of 5-7 seconds. To reach this temperature, steam is injected into the mixture that is dosed from the dosing pump. A meandering pipe works then realizes the required residence time at a set temperature of minimum 135°C.

NNP Kibbler Stainless kibbler, 7.5Kw motor, 3Ph