7
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 6000 mmPlattenbreite: 2000 mmPlattenhöhe: 350 mmT-Nutenbreite: 36/60 mmT - Nutenabstand: 285 mmAnzahl der T-Nuten: 8Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 6000 mm
Plattenbreite: 2000 mm
Plattenhöhe: 350 mm
T-Nutenbreite: 36/60 mm
T - Nutenabstand: 285 mm
Anzahl der T-Nuten: 8
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 2000 mm
Plattenhöhe: 350 mm
T-Nutenbreite: 36/60 mm
T - Nutenabstand: 285 mm
Anzahl der T-Nuten: 8
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
1
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 6000 mmPlattenbreite: 2000 mmPlattenhöhe: 320 mmT-Nuten - Breite: mmT - Nutenabstand: mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 8 tRaumbedarf ca.: m
Plattenlänge: 6000 mm
Plattenbreite: 2000 mm
Plattenhöhe: 320 mm
T-Nuten - Breite: mm
T - Nutenabstand: mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8 t
Raumbedarf ca.: m
Plattenbreite: 2000 mm
Plattenhöhe: 320 mm
T-Nuten - Breite: mm
T - Nutenabstand: mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8 t
Raumbedarf ca.: m
6
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 5000 mmPlattenbreite: 2500 mmPlattenhöhe: 300 mmAnzahl der T-Nuten: 10T-Nuten - Breite: 36/47 mmT-Nuten - Abstand: 350 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 5000 mm
Plattenbreite: 2500 mm
Plattenhöhe: 300 mm
Anzahl der T-Nuten: 10
T-Nuten - Breite: 36/47 mm
T-Nuten - Abstand: 350 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 2500 mm
Plattenhöhe: 300 mm
Anzahl der T-Nuten: 10
T-Nuten - Breite: 36/47 mm
T-Nuten - Abstand: 350 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
3
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 5000 mmPlattenbreite: 2100 mmPlattenhöhe: 300 mmT-Nuten - Breite: 40/63 mmT-Nuten - Abstand: 300 mmAnzahl der T-Nuten: 6Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 5000 mm
Plattenbreite: 2100 mm
Plattenhöhe: 300 mm
T-Nuten - Breite: 40/63 mm
T-Nuten - Abstand: 300 mm
Anzahl der T-Nuten: 6
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 2100 mm
Plattenhöhe: 300 mm
T-Nuten - Breite: 40/63 mm
T-Nuten - Abstand: 300 mm
Anzahl der T-Nuten: 6
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
2
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 5000 mmPlattenbreite: 2000 mmPlattenhöhe: 300 mmAnzahl der T-Nuten: 8T-Nutenbreite: 28/48 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 5000 mm
Plattenbreite: 2000 mm
Plattenhöhe: 300 mm
Anzahl der T-Nuten: 8
T-Nutenbreite: 28/48 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 2000 mm
Plattenhöhe: 300 mm
Anzahl der T-Nuten: 8
T-Nutenbreite: 28/48 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
3
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 5000 mmPlattenbreite: 1800 mmPlattenhöhe: 290 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 5000 mm
Plattenbreite: 1800 mm
Plattenhöhe: 290 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 1800 mm
Plattenhöhe: 290 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 4200 mmPlattenbreite: 1500 mmPlattenhöhe: 300 mmAnzahl der T-Nuten: 2T-Nutenbreite: 36/62 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 4200 mm
Plattenbreite: 1500 mm
Plattenhöhe: 300 mm
Anzahl der T-Nuten: 2
T-Nutenbreite: 36/62 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 1500 mm
Plattenhöhe: 300 mm
Anzahl der T-Nuten: 2
T-Nutenbreite: 36/62 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
6
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 4000 mmPlattenbreite: 1600 mmPlattenhöhe: 300 mmT-Nuten - Abstand: 175 mmT-Nuten - Breite: 28/48 mmAnzahl der T-Nuten: 9Gesamtleistungsbedarf: kWMaschinengewicht ca.: 10 tRaumbedarf ca.: 4000x1600x250 m
Plattenlänge: 4000 mm
Plattenbreite: 1600 mm
Plattenhöhe: 300 mm
T-Nuten - Abstand: 175 mm
T-Nuten - Breite: 28/48 mm
Anzahl der T-Nuten: 9
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 10 t
Raumbedarf ca.: 4000x1600x250 m
Plattenbreite: 1600 mm
Plattenhöhe: 300 mm
T-Nuten - Abstand: 175 mm
T-Nuten - Breite: 28/48 mm
Anzahl der T-Nuten: 9
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 10 t
Raumbedarf ca.: 4000x1600x250 m
2
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 3740 mmPlattenbreite: 2400 mmPlattenhöhe: 300 mmT-Nutenbreite: 45/80 mmT-Nuten - Abstand: 300 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 3740 mm
Plattenbreite: 2400 mm
Plattenhöhe: 300 mm
T-Nutenbreite: 45/80 mm
T-Nuten - Abstand: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 2400 mm
Plattenhöhe: 300 mm
T-Nutenbreite: 45/80 mm
T-Nuten - Abstand: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
2
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 3740 mmPlattenbreite: 2400 mmPlattenhöhe: 300 mmT-Nutenbreite: 45/80 mmT-Nuten - Abstand: 300 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 3740 mm
Plattenbreite: 2400 mm
Plattenhöhe: 300 mm
T-Nutenbreite: 45/80 mm
T-Nuten - Abstand: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 2400 mm
Plattenhöhe: 300 mm
T-Nutenbreite: 45/80 mm
T-Nuten - Abstand: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
3
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 3740 mmPlattenbreite: 2400 mmPlattenhöhe: 300 mmT-Nutenbreite: 45/80 mmT - Nutenabstand: 300 mmAnzahl der T-Nuten: 8Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 3740 mm
Plattenbreite: 2400 mm
Plattenhöhe: 300 mm
T-Nutenbreite: 45/80 mm
T - Nutenabstand: 300 mm
Anzahl der T-Nuten: 8
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 2400 mm
Plattenhöhe: 300 mm
T-Nutenbreite: 45/80 mm
T - Nutenabstand: 300 mm
Anzahl der T-Nuten: 8
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 3500 mmPlattenbreite: 1750 mmPlattenhöhe: 400 mmT-Nuten - Breite: 340 mmT - Nutenabstand: 250 mmAnzahl der T-Nuten: 7Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 3500 mm
Plattenbreite: 1750 mm
Plattenhöhe: 400 mm
T-Nuten - Breite: 340 mm
T - Nutenabstand: 250 mm
Anzahl der T-Nuten: 7
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 1750 mm
Plattenhöhe: 400 mm
T-Nuten - Breite: 340 mm
T - Nutenabstand: 250 mm
Anzahl der T-Nuten: 7
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 3500 mmPlattenbreite: 1600 mmPlattenhöhe: 180 mmT-Nuten - Abstand: 175 mmT-Nuten - Breite: 30/50 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 7 tRaumbedarf ca.: 4000x1600x250 m
Plattenlänge: 3500 mm
Plattenbreite: 1600 mm
Plattenhöhe: 180 mm
T-Nuten - Abstand: 175 mm
T-Nuten - Breite: 30/50 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 7 t
Raumbedarf ca.: 4000x1600x250 m
Plattenbreite: 1600 mm
Plattenhöhe: 180 mm
T-Nuten - Abstand: 175 mm
T-Nuten - Breite: 30/50 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 7 t
Raumbedarf ca.: 4000x1600x250 m
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 3000 mmPlattenbreite: 2250 mmPlattenhöhe: 260 mmT-Nuten - Abstand: 250 mmT-Nuten - Breite: 28/47 mmT-Nuten: 9Tisch: Kante 930Stahl Regalfüße: 4
Plattenlänge: 3000 mm
Plattenbreite: 2250 mm
Plattenhöhe: 260 mm
T-Nuten - Abstand: 250 mm
T-Nuten - Breite: 28/47 mm
T-Nuten: 9
Tisch: Kante 930
Stahl Regalfüße: 4
Plattenbreite: 2250 mm
Plattenhöhe: 260 mm
T-Nuten - Abstand: 250 mm
T-Nuten - Breite: 28/47 mm
T-Nuten: 9
Tisch: Kante 930
Stahl Regalfüße: 4
4
Metal working and machine toolsAccessories and spare partsBolster plates
Länge: 3000 mmBreite: 2000 mmAnzahl der T-Nuten: 7
Länge: 3000 mm
Breite: 2000 mm
Anzahl der T-Nuten: 7
Breite: 2000 mm
Anzahl der T-Nuten: 7
3
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 2500 mmPlattenbreite: 1800 mmPlattenhöhe: 600 mm
Plattenlänge: 2500 mm
Plattenbreite: 1800 mm
Plattenhöhe: 600 mm
Plattenbreite: 1800 mm
Plattenhöhe: 600 mm
3
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 2000 mmPlattenbreite: 1500 mmPlattenhöhe: 260 mmT-Nuten: 22/40 mmAnzahl der T-Nuten: 7Abstand der T-Nuten längs: 200 mmAbstand der T-Nuten quer: 200 mmMaschinengewicht ca.: 1,50 t
Plattenlänge: 2000 mm
Plattenbreite: 1500 mm
Plattenhöhe: 260 mm
T-Nuten: 22/40 mm
Anzahl der T-Nuten: 7
Abstand der T-Nuten längs: 200 mm
Abstand der T-Nuten quer: 200 mm
Maschinengewicht ca.: 1,50 t
Plattenbreite: 1500 mm
Plattenhöhe: 260 mm
T-Nuten: 22/40 mm
Anzahl der T-Nuten: 7
Abstand der T-Nuten längs: 200 mm
Abstand der T-Nuten quer: 200 mm
Maschinengewicht ca.: 1,50 t
5
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 1800 mmPlattenbreite: 1600 mmPlattenhöhe: 160 mmT-Nutenbreite: 28/48 mmT - Nutenabstand: 200 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 1800 mm
Plattenbreite: 1600 mm
Plattenhöhe: 160 mm
T-Nutenbreite: 28/48 mm
T - Nutenabstand: 200 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 1600 mm
Plattenhöhe: 160 mm
T-Nutenbreite: 28/48 mm
T - Nutenabstand: 200 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
1
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 1200 mmPlattenbreite: 840 mmPlattenhöhe: 150 mmT-Nuten - Abstand: 100 mmT-Nuten - Breite: 38/22 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 0,5 tRaumbedarf ca.: m
Plattenlänge: 1200 mm
Plattenbreite: 840 mm
Plattenhöhe: 150 mm
T-Nuten - Abstand: 100 mm
T-Nuten - Breite: 38/22 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 0,5 t
Raumbedarf ca.: m
Plattenbreite: 840 mm
Plattenhöhe: 150 mm
T-Nuten - Abstand: 100 mm
T-Nuten - Breite: 38/22 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 0,5 t
Raumbedarf ca.: m
1
Metal working and machine toolsAccessories and spare partsMarking plates
Länge: 2400 mmBreite: 3100 mmTischhöhe: 660 mmDicke: 300 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 7 tRaumbedarf ca.: 2,4x3,1x0,66 m
Länge: 2400 mm
Breite: 3100 mm
Tischhöhe: 660 mm
Dicke: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 7 t
Raumbedarf ca.: 2,4x3,1x0,66 m
Breite: 3100 mm
Tischhöhe: 660 mm
Dicke: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 7 t
Raumbedarf ca.: 2,4x3,1x0,66 m
8
Metal working and machine toolsAccessories and spare partsMarking plates
Tischlänge: 12000 mmTischbreite: 8000 mmTischhöhe: 800 mmDicke der Platte: 300Gesamtleistungsbedarf: kWMaschinengewicht ca.: 82,5 tRaumbedarf ca.: 12x8 m
Tischlänge: 12000 mm
Tischbreite: 8000 mm
Tischhöhe: 800 mm
Dicke der Platte: 300
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 82,5 t
Raumbedarf ca.: 12x8 m
Tischbreite: 8000 mm
Tischhöhe: 800 mm
Dicke der Platte: 300
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 82,5 t
Raumbedarf ca.: 12x8 m
3
Metal working and machine toolsAccessories and spare partsMarking plates
Tischlänge: 1000 mmTischbreite: 1008 mmTischhöhe: 130 mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: . tRaumbedarf ca.: . m
Tischlänge: 1000 mm
Tischbreite: 1008 mm
Tischhöhe: 130 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
Tischbreite: 1008 mm
Tischhöhe: 130 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
6
Food machinesAccessories and spare parts
Sieveguard Vibratory sieve, Stainless vibratory compact sieve, 550mm diameter mesh, mobile, 3Ph
Sieveguard Vibratory sieve, Stainless vibratory compact sieve, 550mm diameter mesh, mobile, 3Ph
5
Food machinesAccessories and spare parts
Palamatic M7 Palpharmamove drum lifter tipper, Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load
Palamatic M7 Palpharmamove drum lifter tipper, Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load
3
Food machinesAccessories and spare parts
Gough Engineering GV1 Vibratory sieve, Stainless, 450mm mesh diameter, mobile, 3Ph
Gough Engineering GV1 Vibratory sieve, Stainless, 450mm mesh diameter, mobile, 3Ph
4
Food machinesAccessories and spare parts
Russell Finex 17300 Vibratory sieve, Stainless, 500mm diameter mesh, mobile, 3Ph
Russell Finex 17300 Vibratory sieve, Stainless, 500mm diameter mesh, mobile, 3Ph
5
Food machinesAccessories and spare parts
Markem Imaje 9410 Inkjet coders, 2018, stainless inkjet coders, three in stock, HMI Touch screen controls, 1Ph
Markem Imaje 9410 Inkjet coders, 2018, stainless inkjet coders, three in stock, HMI Touch screen controls, 1Ph
4
Food machinesAccessories and spare parts
Videojet 1580 Inkjet coder, Stainless inkjet coding machine, touch screen controls, 1Ph
Videojet 1580 Inkjet coder, Stainless inkjet coding machine, touch screen controls, 1Ph
4
Food machinesAccessories and spare parts
Sartorius Combics 3 platform scale, Stainless, platform scale with ramp, weigh range 1Kg to 300Kgs, platform 1000mm x 1000mm, 1Ph
Sartorius Combics 3 platform scale, Stainless, platform scale with ramp, weigh range 1Kg to 300Kgs, platform 1000mm x 1000mm, 1Ph
8
Food machinesAccessories and spare parts
Sartorius SYNUS10 Metal detector checkweigher, Stainless, overall belt dimensions 1700mm x 150mm, with Sartorius MDP Plus metal detector aperture 200mm W x 330mm H, checkweigher platform 260mm x 150mm, weight rang 100g to 2000g, two push arm rejects, previously used for jars of olives, 1Ph Password 1827
Sartorius SYNUS10 Metal detector checkweigher, Stainless, overall belt dimensions 1700mm x 150mm, with Sartorius MDP Plus metal detector aperture 200mm W x 330mm H, checkweigher platform 260mm x 150mm, weight rang 100g to 2000g, two push arm rejects, previously used for jars of olives, 1Ph Password 1827
1
Metal working and machine toolsAccessories and spare parts
Jaw opening: 100 mm
jaw height: 40 mm
Opening of upper beam: 108 mm
Weight: 13 kg
Jaw opening: 100 mm
jaw height: 40 mm
Opening of upper beam: 108 mm
Weight: 13 kg
jaw height: 40 mm
Opening of upper beam: 108 mm
Weight: 13 kg
13
Plastic processing machinesInjection molding machines
Ref. no.: 17540
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
Ref. no.: 17540
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
1
Metal working and machine toolsAccessories and spare parts
Jaw opening: 200 mm
jaw height: 63 mm
Opening of upper beam: 160 mm
Jaw opening: 200 mm
jaw height: 63 mm
Opening of upper beam: 160 mm
jaw height: 63 mm
Opening of upper beam: 160 mm
4
Metal working and machine toolsAccessories and spare parts
Jaw opening: 150 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
Jaw opening: 150 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
3
Metal working and machine toolsAccessories and spare parts
Length: 2010 mm
Width: 680 mm
Height: 880 mm
Weight: 150 kg
Length: 2010 mm
Width: 680 mm
Height: 880 mm
Weight: 150 kg
Width: 680 mm
Height: 880 mm
Weight: 150 kg
2
Metal working and machine toolsAccessories and spare parts
Jaw opening: 100 mm
jaw height: 32 mm
Weight: 12 kg
Jaw opening: 100 mm
jaw height: 32 mm
Weight: 12 kg
jaw height: 32 mm
Weight: 12 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18643
Manufacturer: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 4,6 x 1,6 x 2,1 m
Machine weight: 4850 kg
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.
The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards.
Key advantages of this series include:
* Robust and durable construction
* High process stability and repeatability
* Reliable ARBURG control system
* Good availability of spare parts
* Suitable for continuous industrial operation
The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market.
Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.
Ref. no.: 18643
Manufacturer: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 4,6 x 1,6 x 2,1 m
Machine weight: 4850 kg
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.
The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards.
Key advantages of this series include:
* Robust and durable construction
* High process stability and repeatability
* Reliable ARBURG control system
* Good availability of spare parts
* Suitable for continuous industrial operation
The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market.
Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.
Manufacturer: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 4,6 x 1,6 x 2,1 m
Machine weight: 4850 kg
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.
The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards.
Key advantages of this series include:
* Robust and durable construction
* High process stability and repeatability
* Reliable ARBURG control system
* Good availability of spare parts
* Suitable for continuous industrial operation
The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market.
Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.
2
Metal working and machine toolsAccessories and spare parts
Jaw opening: 200 mm
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
Jaw opening: 200 mm
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
4
Food machinesAccessories and spare parts
Southworth lifter, Stainless product lifter, SWL 40Kgs, mobile, 1Ph,
Southworth lifter, Stainless product lifter, SWL 40Kgs, mobile, 1Ph,
10
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18565
Manufacturer: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Further information:
The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control.
The machine is equipped with a Demag (Wittmann) DR721 linear robot.
Robot specifications:
Year of manufacture: 2005
X-axis: 550 mm
Y-axis: 1000 mm
Z-axis: 2000 mm
The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes.
In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies).
The machine was in running production and operating without problems until dismantling.
Ref. no.: 18565
Manufacturer: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Further information:
The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control.
The machine is equipped with a Demag (Wittmann) DR721 linear robot.
Robot specifications:
Year of manufacture: 2005
X-axis: 550 mm
Y-axis: 1000 mm
Z-axis: 2000 mm
The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes.
In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies).
The machine was in running production and operating without problems until dismantling.
Manufacturer: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Further information:
The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control.
The machine is equipped with a Demag (Wittmann) DR721 linear robot.
Robot specifications:
Year of manufacture: 2005
X-axis: 550 mm
Y-axis: 1000 mm
Z-axis: 2000 mm
The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes.
In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies).
The machine was in running production and operating without problems until dismantling.
5
Metal working and machine toolsAccessories and spare parts
Jaw opening: 120 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
Jaw opening: 120 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
5
Metal working and machine toolsAccessories and spare parts
Jaw opening: 100 mm
jaw height: 32 mm
Opening of upper beam: 135 mm
Weight: 13 kg
Jaw opening: 100 mm
jaw height: 32 mm
Opening of upper beam: 135 mm
Weight: 13 kg
jaw height: 32 mm
Opening of upper beam: 135 mm
Weight: 13 kg
6
Metal working and machine toolsAccessories and spare parts
Jaw opening: 80 mm
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
Jaw opening: 80 mm
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
2
Metal working and machine toolsAccessories and spare parts
Jaw opening: 80 mm
jaw height: 28 mm
Weight: 12 kg
Jaw opening: 80 mm
jaw height: 28 mm
Weight: 12 kg
jaw height: 28 mm
Weight: 12 kg
2
Metal working and machine toolsAccessories and spare parts
Jaw opening: 150 mm
jaw height: 40 mm
Weight: 33 kg
Jaw opening: 150 mm
jaw height: 40 mm
Weight: 33 kg
jaw height: 40 mm
Weight: 33 kg
8
Metal working and machine toolsAccessories and spare partsOther
Durchmesser: . mmAnzahl der Schneiden: .Aufnahme: .
Durchmesser: . mm
Anzahl der Schneiden: .
Aufnahme: .
Anzahl der Schneiden: .
Aufnahme: .
5
Metal working and machine toolsAccessories and spare partsOther
Durchmesser: . mmAnzahl der Schneiden: .Aufnahme: .
Durchmesser: . mm
Anzahl der Schneiden: .
Aufnahme: .
Anzahl der Schneiden: .
Aufnahme: .
5
Metal working and machine toolsAccessories and spare partsOther
Aufnahme: SK50Gewicht: . kgMaterial: .
Aufnahme: SK50
Gewicht: . kg
Material: .
Gewicht: . kg
Material: .
5
Metal working and machine toolsAccessories and spare partsToolcupboards
Anzahl der Böden: 7 EinsätzeBreite der Böden: 1000 mmTiefe der Böden: . mmHöhe: 1950 mmTiefe: 600 mmBreite: 1050 mm
Anzahl der Böden: 7 Einsätze
Breite der Böden: 1000 mm
Tiefe der Böden: . mm
Höhe: 1950 mm
Tiefe: 600 mm
Breite: 1050 mm
Breite der Böden: 1000 mm
Tiefe der Böden: . mm
Höhe: 1950 mm
Tiefe: 600 mm
Breite: 1050 mm
5
Metal working and machine toolsAccessories and spare partsToolcupboards
Anzahl der Schubladen: 3 St.Abmessung HxBxT: 1000x710x700 mmEigengewicht: . kg
Anzahl der Schubladen: 3 St.
Abmessung HxBxT: 1000x710x700 mm
Eigengewicht: . kg
Abmessung HxBxT: 1000x710x700 mm
Eigengewicht: . kg