_thumb.jpeg "Show advert")
-2_thumb.jpeg "Show advert")
-3_thumb.jpeg "Show advert")
-4_thumb.jpeg "Show advert")
-5_thumb.jpeg "Show advert")
6
Cutting machines
Schneider Senator 76 e-line
Complete with spare knife and knife change tools
Air table
Year 1996
Schneider Senator 76 e-line
Complete with spare knife and knife change tools
Air table
Year 1996
Complete with spare knife and knife change tools
Air table
Year 1996
 Nijmegen_thumb.jpg "Show advert")
 -6 _thumb.jpg "Show advert")
2
Post press machinesPile elevators
Polar LW 1000-4 Stack Lift
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
Polar LW 1000-4 Stack Lift
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
2
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
olihnzvodiudzfoihndfoin
olihnzvodiudzfoihndfoin
3
Pescha round cornering
Radius of knige ± 5 mm
Pescha round cornering
Radius of knige ± 5 mm
Radius of knige ± 5 mm
9
Sheet metal working machinesPipe-bending machines
Round tube: 42 x 2,5 mm
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
Round tube: 42 x 2,5 mm
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
4
Drilling machines and boring mills
Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 180 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 50 mm
Distance spindle - table: 105 - 245 mm
Table: 300 x 200 mm
Column diameter: 50 mm
Length: 400 mm
Width: 248 mm
Height: 460 mm
Weight: 30 kg
Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 180 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 50 mm
Distance spindle - table: 105 - 245 mm
Table: 300 x 200 mm
Column diameter: 50 mm
Length: 400 mm
Width: 248 mm
Height: 460 mm
Weight: 30 kg
Taper: B 16
Distance spindle - column: 180 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 50 mm
Distance spindle - table: 105 - 245 mm
Table: 300 x 200 mm
Column diameter: 50 mm
Length: 400 mm
Width: 248 mm
Height: 460 mm
Weight: 30 kg
2
Accessories and spare parts
Jaw opening: 100 mm
jaw height: 32 mm
Weight: 12 kg
Jaw opening: 100 mm
jaw height: 32 mm
Weight: 12 kg
jaw height: 32 mm
Weight: 12 kg
11
Injection molding machinesPlastic injection molding machines
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
3
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 150 mm
Daylight: 780 mm
Distance between columns: 1000 mm
Length: 1900 mm
Width: 1200 mm
Height: 2450 (PSS: 2600) mm
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 150 mm
Daylight: 780 mm
Distance between columns: 1000 mm
Length: 1900 mm
Width: 1200 mm
Height: 2450 (PSS: 2600) mm
Cylinder fix or moveable: fix
Bending length: 150 mm
Daylight: 780 mm
Distance between columns: 1000 mm
Length: 1900 mm
Width: 1200 mm
Height: 2450 (PSS: 2600) mm
3
pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 1000 mm
Height: 2250 (PSS: 2400) mm
pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 1000 mm
Height: 2250 (PSS: 2400) mm
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 1000 mm
Height: 2250 (PSS: 2400) mm
3
pressing capacity: 100 to
Cylinder fix or moveable: fix
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 850 mm
Height: 2250 (PSS: 2400) mm
pressing capacity: 100 to
Cylinder fix or moveable: fix
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 850 mm
Height: 2250 (PSS: 2400) mm
Cylinder fix or moveable: fix
Daylight: 900 mm
Distance between columns: 1050 mm
Length: 1900 mm
Width: 850 mm
Height: 2250 (PSS: 2400) mm
3
pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 900 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 (PSS: 2300) mm
pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 900 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 (PSS: 2300) mm
Cylinder fix or moveable: horizontal moveable
Daylight: 900 mm
Distance between columns: 900 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 (PSS: 2300) mm
3
pressing capacity: 70 to
Cylinder fix or moveable: fix
Daylight: 900 mm
Distance between columns: 900 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 (PSS: 2300) mm
pressing capacity: 70 to
Cylinder fix or moveable: fix
Daylight: 900 mm
Distance between columns: 900 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 (PSS: 2300) mm
Cylinder fix or moveable: fix
Daylight: 900 mm
Distance between columns: 900 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 (PSS: 2300) mm
3
pressing capacity: 20 to
Cylinder fix or moveable: fix
Daylight: 825 mm
Distance between columns: 520 mm
Length: 1150 mm
Width: 500 mm
Height: 1800 (PSS: 1950) mm
pressing capacity: 20 to
Cylinder fix or moveable: fix
Daylight: 825 mm
Distance between columns: 520 mm
Length: 1150 mm
Width: 500 mm
Height: 1800 (PSS: 1950) mm
Cylinder fix or moveable: fix
Daylight: 825 mm
Distance between columns: 520 mm
Length: 1150 mm
Width: 500 mm
Height: 1800 (PSS: 1950) mm
4
Drilling machines and boring mills
Drilling capacy mild steel: 23 mm
Taper: MK 2
Distance spindle - column: 260 mm
Revs: 20 - 2000 r.p.m.
Motor: 1.5 kW
Tapping capacity: M16x1
Feeds: manual mm/r
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Quill travel: 100 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
Drilling capacy mild steel: 23 mm
Taper: MK 2
Distance spindle - column: 260 mm
Revs: 20 - 2000 r.p.m.
Motor: 1.5 kW
Tapping capacity: M16x1
Feeds: manual mm/r
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Quill travel: 100 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
Taper: MK 2
Distance spindle - column: 260 mm
Revs: 20 - 2000 r.p.m.
Motor: 1.5 kW
Tapping capacity: M16x1
Feeds: manual mm/r
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Quill travel: 100 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
2
Sheet metal working machinesPlate shears
Cutting length: 2050 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Back gauge: 750 mm
Motor power: 7.5 kW
Table height: 800 mm
Table width: 450 mm
Length: 2700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 2800 kg
Cutting length: 2050 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Back gauge: 750 mm
Motor power: 7.5 kW
Table height: 800 mm
Table width: 450 mm
Length: 2700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 2800 kg
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Back gauge: 750 mm
Motor power: 7.5 kW
Table height: 800 mm
Table width: 450 mm
Length: 2700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 2800 kg
2
Working width: 1350
Sheet thickness range - mild steel: 0,6 - 170 mm
Grinding belt dimensions: 1120 x 2200 mm
Suction capacity: 4000 m³/h
Connection for dust collector diam.: 200 mm
Air connection: 6 bar
Noise level: 78 (+/-2) dB
Length: 1750 mm
Width: 2100 mm
Height: 2180 mm
Weight: 2000 kg
Working width: 1350
Sheet thickness range - mild steel: 0,6 - 170 mm
Grinding belt dimensions: 1120 x 2200 mm
Suction capacity: 4000 m³/h
Connection for dust collector diam.: 200 mm
Air connection: 6 bar
Noise level: 78 (+/-2) dB
Length: 1750 mm
Width: 2100 mm
Height: 2180 mm
Weight: 2000 kg
Sheet thickness range - mild steel: 0,6 - 170 mm
Grinding belt dimensions: 1120 x 2200 mm
Suction capacity: 4000 m³/h
Connection for dust collector diam.: 200 mm
Air connection: 6 bar
Noise level: 78 (+/-2) dB
Length: 1750 mm
Width: 2100 mm
Height: 2180 mm
Weight: 2000 kg
3
Accessories and spare parts
Length: 835 mm
Length: 835 mm
2
Accessories and spare parts
Jaw opening: 200 mm
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
Jaw opening: 200 mm
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
7
PressesWorkshop press
pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Working speed: max. 9 mm/s
Motor power: 2 kW
Horizontal movable cylinder: 650 mm
Length: 1950 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1220 kg
pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Working speed: max. 9 mm/s
Motor power: 2 kW
Horizontal movable cylinder: 650 mm
Length: 1950 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1220 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 1050 mm
Working speed: max. 9 mm/s
Motor power: 2 kW
Horizontal movable cylinder: 650 mm
Length: 1950 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1220 kg
6
Sheet metal working machinesPipe-bending machines
Flexion modulus: 19 cm³
Standard steel tube: 38 x 1,5 mm
Furniture tube: 38 x 1,5 mm
FE35 (for hydraulic tubes): 35 x 3 mm
Stainless steel AISI304-318: 30 x 2 mm
Stainless steel AISI308 (food industry): 35 x 1,5 mm
Brass soft: 42 x 1,5 mm
Hard copper and aluminium: 42 x 1,5 mm
Soft copper: 50 x 2 mm
Conduit tube (TAZ): 50 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 20 mm
Squarebar solid (S275JO): 10 x 25 mm
Flatsteel solid (S275JO): 25 x 20 (stehend), 25 x 16 (stehend) mm
Max. bending radius: 180 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 2 r/min
Motor: 0.9 kW
Length: 245 mm
Width: 300 mm
Height: 320 mm
Weight: 23 kg
Flexion modulus: 19 cm³
Standard steel tube: 38 x 1,5 mm
Furniture tube: 38 x 1,5 mm
FE35 (for hydraulic tubes): 35 x 3 mm
Stainless steel AISI304-318: 30 x 2 mm
Stainless steel AISI308 (food industry): 35 x 1,5 mm
Brass soft: 42 x 1,5 mm
Hard copper and aluminium: 42 x 1,5 mm
Soft copper: 50 x 2 mm
Conduit tube (TAZ): 50 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 20 mm
Squarebar solid (S275JO): 10 x 25 mm
Flatsteel solid (S275JO): 25 x 20 (stehend), 25 x 16 (stehend) mm
Max. bending radius: 180 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 2 r/min
Motor: 0.9 kW
Length: 245 mm
Width: 300 mm
Height: 320 mm
Weight: 23 kg
Standard steel tube: 38 x 1,5 mm
Furniture tube: 38 x 1,5 mm
FE35 (for hydraulic tubes): 35 x 3 mm
Stainless steel AISI304-318: 30 x 2 mm
Stainless steel AISI308 (food industry): 35 x 1,5 mm
Brass soft: 42 x 1,5 mm
Hard copper and aluminium: 42 x 1,5 mm
Soft copper: 50 x 2 mm
Conduit tube (TAZ): 50 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 20 mm
Squarebar solid (S275JO): 10 x 25 mm
Flatsteel solid (S275JO): 25 x 20 (stehend), 25 x 16 (stehend) mm
Max. bending radius: 180 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 2 r/min
Motor: 0.9 kW
Length: 245 mm
Width: 300 mm
Height: 320 mm
Weight: 23 kg
4
Drilling machines and boring mills
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg
-1_thumb.jpeg "Show advert")
-2_thumb.jpeg "Show advert")
-3_thumb.jpeg "Show advert")
-4_thumb.jpeg "Show advert")
-5_thumb.jpeg "Show advert")
-6_thumb.jpeg "Show advert")
-7_thumb.jpeg "Show advert")
8
Binding machines
Horauf BDM Universal
Max cover dimensions:410 x 720 mm
Min cover dimenions: 170 x 105 mm
Cardboard thickiness min 1 mm to max 4 mm
Cover paper material: 80-120 g/m2
Horauf BDM Universal
Max cover dimensions:410 x 720 mm
Min cover dimenions: 170 x 105 mm
Cardboard thickiness min 1 mm to max 4 mm
Cover paper material: 80-120 g/m2
Max cover dimensions:410 x 720 mm
Min cover dimenions: 170 x 105 mm
Cardboard thickiness min 1 mm to max 4 mm
Cover paper material: 80-120 g/m2
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
-6._thumb.jpeg "Show advert")
10
Post press machinesBinding machines
ang 470 PLC Ring Binder & Lever arch Assembly Line
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
ang 470 PLC Ring Binder & Lever arch Assembly Line
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
5
Beverage productionPumps
Grundfos CRNE19NFGJAEHHQ Vertical multistage centrifugal pump, Vertical multistage centrifugal pump with sensor, with inlet and outlet ports on the same level (inline) high grade stainless steel in contact with liquid, 0.75Kw, 2.2 M3/h, see plate for more spec, never been used in box, two in stock
Grundfos CRNE19NFGJAEHHQ Vertical multistage centrifugal pump, Vertical multistage centrifugal pump with sensor, with inlet and outlet ports on the same level (inline) high grade stainless steel in contact with liquid, 0.75Kw, 2.2 M3/h, see plate for more spec, never been used in box, two in stock
5
Beverage productionPumps
MDM D32.2K Centrifugal pump, 2.2Kw centrifugal pump, MDM hygienic pump, 2870RPM, 35mm inlet,
MDM D32.2K Centrifugal pump, 2.2Kw centrifugal pump, MDM hygienic pump, 2870RPM, 35mm inlet,
4
Accessories and spare parts
Southworth lifter, Stainless product lifter, SWL 40Kgs, mobile, 1Ph,
Southworth lifter, Stainless product lifter, SWL 40Kgs, mobile, 1Ph,
6
Meat processing
Comefri NPA710200IE3 Centrifugal fan, 2017, 30Kw, see plates for spec, two in stock
Comefri NPA710200IE3 Centrifugal fan, 2017, 30Kw, see plates for spec, two in stock
7
Meat processing
Comefri NPA630RD Centrifugal fan, 2017, 7.5Kw, see plates for spec, two in stock
Comefri NPA630RD Centrifugal fan, 2017, 7.5Kw, see plates for spec, two in stock
2
Meat processing
Teknomek Stainless cabinets, Various stainless cabinets on wheels
Teknomek Stainless cabinets, Various stainless cabinets on wheels
3
Meat processing
Teknomek Stainless bins, Various stainless bins
Teknomek Stainless bins, Various stainless bins
2
Meat processing
Teknomek stainless trolleys, Various sizes of stainless trolleys on wheels
Teknomek stainless trolleys, Various sizes of stainless trolleys on wheels
4
Meat processing
Teknomek stainless tables, Various sizes of stainless tables on wheels
Teknomek stainless tables, Various sizes of stainless tables on wheels
6
Cooling technologyRefrigerators
Daikin EWAQ040BAWHBH Water chiller, Serial: 3400103, 2014, Air cooled mini inverter scroll water chiller, 41.Kw, with Daikin EKBT 200L buffer tank with cabinet, 3Ph
Daikin EWAQ040BAWHBH Water chiller, Serial: 3400103, 2014, Air cooled mini inverter scroll water chiller, 41.Kw, with Daikin EKBT 200L buffer tank with cabinet, 3Ph
9
Guttridge Easyflo Mobile screw elevator, Serial: 326493, 2007, elevated screw conveyor, 100Kg stainless hopper, discharge height 1700mm, mobile
Guttridge Easyflo Mobile screw elevator, Serial: 326493, 2007, elevated screw conveyor, 100Kg stainless hopper, discharge height 1700mm, mobile
7
Guttridge Easyflo Mobile screw elevator, Serial: 58493811, 2014, Stainless, elevated screw conveyor, 100Kg stainless hopper, discharge height 1700mm, mobile
Guttridge Easyflo Mobile screw elevator, Serial: 58493811, 2014, Stainless, elevated screw conveyor, 100Kg stainless hopper, discharge height 1700mm, mobile
6
Guttridge Easyflo Mobile screw elevator, Elevated screw conveyor, 100Kg stainless hopper, discharge height 1620mm, mobile
Guttridge Easyflo Mobile screw elevator, Elevated screw conveyor, 100Kg stainless hopper, discharge height 1620mm, mobile
6
Guttridge Easyflo Mobile screw elevator, Serial: 59961811, 2017, Stainless, elevated screw conveyor, 100Kg stainless hopper, with stainless dust free booth on hopper, discharge height 1700mm, mobile
Guttridge Easyflo Mobile screw elevator, Serial: 59961811, 2017, Stainless, elevated screw conveyor, 100Kg stainless hopper, with stainless dust free booth on hopper, discharge height 1700mm, mobile
9
Meat processing
KEK Kibbler, Serial: 11818KIB, Stainless, Kek Kibbler pre breaker mill, ideal for coarse grinding, mounted on stainless frame, 7.5Kw motor, 80Kg stainless hopper, variable speed, comes with wheels, 3Ph
KEK Kibbler, Serial: 11818KIB, Stainless, Kek Kibbler pre breaker mill, ideal for coarse grinding, mounted on stainless frame, 7.5Kw motor, 80Kg stainless hopper, variable speed, comes with wheels, 3Ph
Polar Stainless conveyor 2017, stainless elevator conveyor, elevates from 250mm to 900mm, belt width 300mm, overall length 4000mm, with 50Kg hopper and side guides,
Polar Stainless conveyor 2017, stainless elevator conveyor, elevates from 250mm to 900mm, belt width 300mm, overall length 4000mm, with 50Kg hopper and side guides,
7
Meat processing
Cato PA160 Meat grinder, Serial: 327, Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph
Cato PA160 Meat grinder, Serial: 327, Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph
5
Fruit and vegetable machinesVacuum processing systems
Polar Tumbling drum 2017, Stainless, flavouring drum, overall length 2000mm, drum diameter 1000mm, 3Ph
Polar Tumbling drum 2017, Stainless, flavouring drum, overall length 2000mm, drum diameter 1000mm, 3Ph
6
Catering technologyWashing machines
Unitech Boot wash station, Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph
Unitech Boot wash station, Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph
6
Meat processing
GEA Niro NS2006P piston homogeniser, Serial: 12590, 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph
GEA Niro NS2006P piston homogeniser, Serial: 12590, 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph
6
Meat processing
GEA Niro NS2006P piston homogeniser, Serial: 6233, 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph
GEA Niro NS2006P piston homogeniser, Serial: 6233, 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph
12
Accessories and spare parts
Harland Sirius Mark 5 labeller, Serial: J31878, 2007, wrap around labeller, previously used for pots of tablets, belt dimensions 3500mm x 80mm, also has top mounted top labeller used for labelling the lids of pots, comes with Allen coder, HMI touch screen controls, 3Ph
Harland Sirius Mark 5 labeller, Serial: J31878, 2007, wrap around labeller, previously used for pots of tablets, belt dimensions 3500mm x 80mm, also has top mounted top labeller used for labelling the lids of pots, comes with Allen coder, HMI touch screen controls, 3Ph
11
Bakery-, pastry equipmentMixers
Ram K60D Planetary mixer, Serial: 15099, 2015, 60L stainless bowl, with beater attachment, with adjustable timer and speed controls, safety guard, 3Ph
Ram K60D Planetary mixer, Serial: 15099, 2015, 60L stainless bowl, with beater attachment, with adjustable timer and speed controls, safety guard, 3Ph
1
Sheet metal working machinesBending machines
Blechbreite: 1250 mmBlechstärke: 2 mmAnbiegung: .Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Blechbreite: 1250 mm
Blechstärke: 2 mm
Anbiegung: .
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Blechstärke: 2 mm
Anbiegung: .
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
1
Sheet metal working machinesPress brakes
Druck: 100 tAbkantlänge: 3000 mmStänderweite: 2550 mmHub: 150 mmGesamtleistungsbedarf: kWBetriebsstunden: . hMaschinengewicht ca.: 8,3 tRaumbedarf ca.: m
Druck: 100 t
Abkantlänge: 3000 mm
Ständerweite: 2550 mm
Hub: 150 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: . h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
Abkantlänge: 3000 mm
Ständerweite: 2550 mm
Hub: 150 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: . h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m