4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 175 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 12780 kg
pressing capacity: 175 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 12780 kg
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 12780 kg
3
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg
pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg
5
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 100 to
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
pressing capacity: 100 to
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
1
Metal working and machine toolsSheet metal working machinesFeed straighteners
Sheet Thickness - mild steel: 0.4 - 3.5 mm
Max. sheet width: 200 mm
Max. cross-section: 200 x 3 mm
Feed roll diameter: 80 mm
Feeding speed: 75 m/min
Feeding acceleration: 10 m/s²
Motor torque: 10 Nm
Sheet Thickness - mild steel: 0.4 - 3.5 mm
Max. sheet width: 200 mm
Max. cross-section: 200 x 3 mm
Feed roll diameter: 80 mm
Feeding speed: 75 m/min
Feeding acceleration: 10 m/s²
Motor torque: 10 Nm
Max. sheet width: 200 mm
Max. cross-section: 200 x 3 mm
Feed roll diameter: 80 mm
Feeding speed: 75 m/min
Feeding acceleration: 10 m/s²
Motor torque: 10 Nm
7
Metal working and machine toolsSheet metal working machinesBeading machines
Max. thickness - mild steel: 1.2 mm
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 8 pcs.
Rolls diameter: 62 mm
Motor: 0.75 kW
Revs: 32 1/min
Length: 900 mm
Width: 450 mm
Height: 1350 mm
Weight: 135 kg
Max. thickness - mild steel: 1.2 mm
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 8 pcs.
Rolls diameter: 62 mm
Motor: 0.75 kW
Revs: 32 1/min
Length: 900 mm
Width: 450 mm
Height: 1350 mm
Weight: 135 kg
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 8 pcs.
Rolls diameter: 62 mm
Motor: 0.75 kW
Revs: 32 1/min
Length: 900 mm
Width: 450 mm
Height: 1350 mm
Weight: 135 kg
2
Metal working and machine toolsSheet metal working machinesOther
Tube diameter: 3/4" 26,9 mm, 1" 33,7 mm, 1¼" 42,4 mm, 1½" 48,3 mm, 2" 60,3 mm
Max. wall thickness: 5 mm
Max. wall thickness stainless steel: 3 mm
Weight: 87 kg
Tube diameter: 3/4" 26,9 mm, 1" 33,7 mm, 1¼" 42,4 mm, 1½" 48,3 mm, 2" 60,3 mm
Max. wall thickness: 5 mm
Max. wall thickness stainless steel: 3 mm
Weight: 87 kg
Max. wall thickness: 5 mm
Max. wall thickness stainless steel: 3 mm
Weight: 87 kg
8
Metal working and machine toolsSheet metal working machinesSlitting and cut-to-length lines
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
2
Metal working and machine toolsSheet metal working machinesBending machines
Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
2
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1050 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg
Max. bending capacity - mild steel: 5
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg
2
Metal working and machine toolsSheet metal working machines
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 14 mm
Bevel angle: 30 °
Spindle speed (load-free): 9 rpm
Plate thickness: 6 - 40 mm
Min. plate width: 55 mm
Min. tube inner diameter: 100 mm
Feed speed: 2600 mm/min
Motor: 2.2 kW
Length: 589 mm
Width: 541 mm
Height: 320 mm
Weight: 65 kg
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 14 mm
Bevel angle: 30 °
Spindle speed (load-free): 9 rpm
Plate thickness: 6 - 40 mm
Min. plate width: 55 mm
Min. tube inner diameter: 100 mm
Feed speed: 2600 mm/min
Motor: 2.2 kW
Length: 589 mm
Width: 541 mm
Height: 320 mm
Weight: 65 kg
Suitable for tubes: 1
Max. bevel width: 14 mm
Bevel angle: 30 °
Spindle speed (load-free): 9 rpm
Plate thickness: 6 - 40 mm
Min. plate width: 55 mm
Min. tube inner diameter: 100 mm
Feed speed: 2600 mm/min
Motor: 2.2 kW
Length: 589 mm
Width: 541 mm
Height: 320 mm
Weight: 65 kg
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18138
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Ref. no.: 18138
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
13
Plastic processing machinesInjection molding machinesMulti-component injection molding machines
Ref. no.: 18092
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Ref. no.: 18092
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 17514
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
Ref. no.: 17514
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 17507
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Ref. no.: 17507
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
2
Metal working and machine toolsLathesOther
punch set
punch set
1
Metal working and machine toolsSanding machinesAccessories and spare parts
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
9
Metal working and machine toolsAccessories and spare partsOther
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
4
Metal working and machine toolsMilling machinesAccessories and spare parts
Working Area: 560 x 400 x 32 mm
Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
Working Area: 560 x 400 x 32 mm
Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
6
Metal working and machine toolsMilling machinesAccessories and spare parts
Rotary table: 360 °
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
Rotary table: 360 °
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
5
Metal working and machine toolsAccessories and spare partsMeasuring technology
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
8
Woodworking machinerySawingBelt saws
Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
8
Metal working and machine toolsSawing
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
4
Packaging machineryPacking machines
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
5
Metal working and machine toolsMilling machinesOther
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
7
Packaging machineryPacking machines
Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
12
Metal working and machine toolsDrilling machines and boring millsTapping machines
Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
4
Packaging machineryPacking machines
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
3
Packaging machineryPacking machines
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
6
Metal working and machine toolsSheet metal working machinesPunching machines
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
4
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
10
Metal working and machine toolsCutting machines and equipmentLaser cutting machines
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
4
Packaging machineryPacking machines
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
6
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
1
Solar module Maysun Solar, MSE-07 370 Wp - full black, mono PU module, 1755 mm x 1038 mm x 30 mm, length of connection cable 110 cm, collection only
Solar module Maysun Solar, MSE-07 370 Wp - full black, mono PU module, 1755 mm x 1038 mm x 30 mm, length of connection cable 110 cm, collection only
11
Metal working and machine toolsMilling machinesOther
X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
10
Metal working and machine toolsWelding machinesOther
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
9
Metal working and machine toolsWelding machinesRobots
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
14
Metal working and machine toolsMilling machines
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
13
Metal working and machine toolsSurface finishing
Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good
mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good
mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good
mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
11
Food machinesPackaging machinery
Flexipak rotary pot sealer, 2013, stainless rotary pot sealer, twin station sealer, previously used to seal a 60mm diameter pot, also comes with plate for an 80mm square pot, adjustable temp controls, with foot pedal, 1Ph
Flexipak rotary pot sealer, 2013, stainless rotary pot sealer, twin station sealer, previously used to seal a 60mm diameter pot, also comes with plate for an 80mm square pot, adjustable temp controls, with foot pedal, 1Ph
4
Food machinesPackaging machinery
Serial: 13007 Case taper, top and bottom tape heads, side grip belts, max box width 450mm, max box height 500mm, 3Ph
Serial: 13007 Case taper, top and bottom tape heads, side grip belts, max box width 450mm, max box height 500mm, 3Ph