Alfred Feldmann Werkzeugmaschinen
Member since 20.02.2023
Company description:
Alfred Feldmann Werkzeugmaschinen, an international midsized trading company based in Michelstadt, has been active in the machine trade for 20 years. Our main focus are used metal working machines.In our warehouses in Michelstadt (800 m²) and Freigericht (700 m²) we present CNC machines from different manufacturers. Our used machinery warehouses are about an hour's drive away from Frankfurt, Würzburg, Mannheim, Heidelberg and Heilbronn.
All machines are expertly tested by our service technicians and can be demonstrated with enabled power. Of course, also test runs on the machines are possible.
We are also interested in buying used machines. We are happy to make a fair offer for your used machine. Our competent service technicians ensure smooth operation of disassembling, loading and transport.
Höhenstraße 4
64720 Michelstadt
+49 60614410
+49 60614131
+49 60614131
All adverts of the company 60
14
Außenmaße 7,46 x 3,4 m, Die Räume bestehen aus Container für Umkleide, Container in der Mitte ist der Technik-Container mit Verteilung Strom, Durchlauferhitzer, Alle Wasseranschlüsse, Abwasser Bad, Spüle Teeküche, Der Raum mit der Teeküche besteht aus Boden und Decke, Wand vorne und hinten, sowie Wand rechts. Boden und Decke sind geteilt, so daß die auf 2,4 m LKW gefahren werden können. Alles Fertigbauweise, so daß die Räume an einem Tag wieder aufgebaut werden können.
Außenmaße 7,46 x 3,4 m, Die Räume bestehen aus Container für Umkleide, Container in der Mitte ist der Technik-Container mit Verteilung Strom, Durchlauferhitzer, Alle Wasseranschlüsse, Abwasser Bad, Spüle Teeküche, Der Raum mit der Teeküche besteht aus Boden und Decke, Wand vorne und hinten, sowie Wand rechts. Boden und Decke sind geteilt, so daß die auf 2,4 m LKW gefahren werden können. Alles Fertigbauweise, so daß die Räume an einem Tag wieder aufgebaut werden können.
The advert was translated automatically and some translation errors may have occurred.
7
Drilling machines and boring mills
Table size: 260 x 260 mm
Speed range: 380/725/960/1390/2080 rpm
Taper fixture: MK2
Quill ram: 70 mm
Drilling performance: 20 mm
Total power: 0,8 kW
Weight of machine: 105 kg
Space requirement (W x D x H): 1,0 x 0,3 x 1,0 m
Condition: sehr gut
Drill chuck - 16 mm, well-maintained machine, little used
Accessory: no additional accessories
Table size: 260 x 260 mm
Speed range: 380/725/960/1390/2080 rpm
Taper fixture: MK2
Quill ram: 70 mm
Drilling performance: 20 mm
Total power: 0,8 kW
Weight of machine: 105 kg
Space requirement (W x D x H): 1,0 x 0,3 x 1,0 m
Condition: sehr gut
Drill chuck - 16 mm, well-maintained machine, little used
Accessory: no additional accessories
Speed range: 380/725/960/1390/2080 rpm
Taper fixture: MK2
Quill ram: 70 mm
Drilling performance: 20 mm
Total power: 0,8 kW
Weight of machine: 105 kg
Space requirement (W x D x H): 1,0 x 0,3 x 1,0 m
Condition: sehr gut
Drill chuck - 16 mm, well-maintained machine, little used
Accessory: no additional accessories
9
Milling machinesOther
X: 400 mm
Y: 500 mm
Z: 450 mm
Table size: 580 x 560 mm
Speed range: 9.000 / 16.000 rpm
Tool changer: 20 -station
Tool holder: HSK-A 63
Chip conveyor: yes
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Speed range main spindle: 16000 rpm
Feed force x/y axis: 3500 N
Rapid traverse X/Y axis: 35 mtr/min
Rapid traverse Z axis: 30 mtr/min
Feed range z axis: 4200 N
Control: Heidenhain TNC 426
Total power: 25 kW
Weight of machine: 5500 kg
Space requirement (W x D x H): 3,5 x 1,4 x 2,6 m
X: 400 mm
Y: 500 mm
Z: 450 mm
Table size: 580 x 560 mm
Speed range: 9.000 / 16.000 rpm
Tool changer: 20 -station
Tool holder: HSK-A 63
Chip conveyor: yes
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Speed range main spindle: 16000 rpm
Feed force x/y axis: 3500 N
Rapid traverse X/Y axis: 35 mtr/min
Rapid traverse Z axis: 30 mtr/min
Feed range z axis: 4200 N
Control: Heidenhain TNC 426
Total power: 25 kW
Weight of machine: 5500 kg
Space requirement (W x D x H): 3,5 x 1,4 x 2,6 m
Y: 500 mm
Z: 450 mm
Table size: 580 x 560 mm
Speed range: 9.000 / 16.000 rpm
Tool changer: 20 -station
Tool holder: HSK-A 63
Chip conveyor: yes
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Speed range main spindle: 16000 rpm
Feed force x/y axis: 3500 N
Rapid traverse X/Y axis: 35 mtr/min
Rapid traverse Z axis: 30 mtr/min
Feed range z axis: 4200 N
Control: Heidenhain TNC 426
Total power: 25 kW
Weight of machine: 5500 kg
Space requirement (W x D x H): 3,5 x 1,4 x 2,6 m
1
SawingOther
Weight of machine: 7 kg
Height adjustable, 3 pieces available, height 0.94 m
Weight of machine: 7 kg
Height adjustable, 3 pieces available, height 0.94 m
Height adjustable, 3 pieces available, height 0.94 m
1
SawingOther
Weight of machine: 10 kg
Weight of machine: 10 kg
5
Sanding machinesSurface grinding machines
Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
8
Sanding machinesSurface grinding machines
Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
4
Packing machines
Weight of machine: 18 kg
Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m
was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm
Weight of machine: 18 kg
Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m
was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm
Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m
was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm
8
Packing machines
Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
14
LathesCNC lathes
Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
9
Sanding machinesSurface grinding machines
Grinding length: 400 mm
Grinding width: 200 mm
Table size: 450 x 200 mm
Table speed: 1 - 25
Magnetic table: 450 x 200 mm
Grinding wheel dimensions: 250 x 25 mm
Spindle speed: 1.300 / 2.600 rpm
Coolant system: ja
Total power: 4,5 kW
Weight of machine: 1900 kg
Space requirement (W x D x H): 1,9 x 1,5 x 2,45 m
Condition: einsatzbereit
no automatic delivery
Accessory: Documentation, circuit diagram
Grinding length: 400 mm
Grinding width: 200 mm
Table size: 450 x 200 mm
Table speed: 1 - 25
Magnetic table: 450 x 200 mm
Grinding wheel dimensions: 250 x 25 mm
Spindle speed: 1.300 / 2.600 rpm
Coolant system: ja
Total power: 4,5 kW
Weight of machine: 1900 kg
Space requirement (W x D x H): 1,9 x 1,5 x 2,45 m
Condition: einsatzbereit
no automatic delivery
Accessory: Documentation, circuit diagram
Grinding width: 200 mm
Table size: 450 x 200 mm
Table speed: 1 - 25
Magnetic table: 450 x 200 mm
Grinding wheel dimensions: 250 x 25 mm
Spindle speed: 1.300 / 2.600 rpm
Coolant system: ja
Total power: 4,5 kW
Weight of machine: 1900 kg
Space requirement (W x D x H): 1,9 x 1,5 x 2,45 m
Condition: einsatzbereit
no automatic delivery
Accessory: Documentation, circuit diagram
8
Milling machinesOther
X: 760 mm
Y: 530 mm
Z: 560 mm
Table size: 1200 x 500 mm
Speed range: 12.000 rpm
Taper fixture: SK 40
Internal coolant: 20 bar
Tool changer: 30 -station
Electrical hand wheel: yes
Chip conveyor: yes
Control: Siemens 828 D
Exhaust unit: yes
Working hour: 17.500 h
Total power: 25 kW
Weight of machine: 8000 kg
Space requirement (W x D x H): 2,4 × 2,0 × 2,8 m
Condition: good, few operating hours
4th axis, swivel table
Accessory: documentation, no further accessories
X: 760 mm
Y: 530 mm
Z: 560 mm
Table size: 1200 x 500 mm
Speed range: 12.000 rpm
Taper fixture: SK 40
Internal coolant: 20 bar
Tool changer: 30 -station
Electrical hand wheel: yes
Chip conveyor: yes
Control: Siemens 828 D
Exhaust unit: yes
Working hour: 17.500 h
Total power: 25 kW
Weight of machine: 8000 kg
Space requirement (W x D x H): 2,4 × 2,0 × 2,8 m
Condition: good, few operating hours
4th axis, swivel table
Accessory: documentation, no further accessories
Y: 530 mm
Z: 560 mm
Table size: 1200 x 500 mm
Speed range: 12.000 rpm
Taper fixture: SK 40
Internal coolant: 20 bar
Tool changer: 30 -station
Electrical hand wheel: yes
Chip conveyor: yes
Control: Siemens 828 D
Exhaust unit: yes
Working hour: 17.500 h
Total power: 25 kW
Weight of machine: 8000 kg
Space requirement (W x D x H): 2,4 × 2,0 × 2,8 m
Condition: good, few operating hours
4th axis, swivel table
Accessory: documentation, no further accessories
14
Sanding machinesInternal grinding machines
Internal grinding diameter min.: 1 mm
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good
Well-maintained machine from a German automobile manufacturer
Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
Internal grinding diameter min.: 1 mm
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good
Well-maintained machine from a German automobile manufacturer
Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good
Well-maintained machine from a German automobile manufacturer
Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
10
Packing machines
Dimensions of the bars: Ø 35 mm - 2.200
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
Dimensions of the bars: Ø 35 mm - 2.200
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
3
Accessories and spare partsOther
Diameter: 200 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
Diameter: 200 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
3
Packing machines
Working height: 820 mm
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
Working height: 820 mm
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
8
SawingVertical band saws
Troath: 500 mm
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
Troath: 500 mm
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
11
Packing machines
Processing diameter: 320 mm
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
Processing diameter: 320 mm
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
12
Milling machinesOther
X: 750 mm
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
X: 750 mm
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
14
Milling machines
X: 560 mm
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
X: 560 mm
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
4
Packing machines
Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
14
LathesCNC lathes
Turning diameter: 284 mm
Turning length: 406 mm
X: 218 mm
Z: 406 mm
Speed range: 6.000 rpm
Spindle bore: 45 mm
Turret: 12 -station
Driven tools: yes
Tool holder: VDI 30
Control: Siemens 810 D
Electrical hand wheel: yes
Chip conveyor: yes
Total power: 25 kW
Weight of machine: 2.694 kg
Space requirement (W x D x H): 3,0 x 1,55 x 1,8 m
Spindle re-stored in 2024, Siemens options: Shopturn, peripheral connection, ShopTurn Work Step programming, transmit and shell surface transformation
Accessory: Documentation, no other accessories
Turning diameter: 284 mm
Turning length: 406 mm
X: 218 mm
Z: 406 mm
Speed range: 6.000 rpm
Spindle bore: 45 mm
Turret: 12 -station
Driven tools: yes
Tool holder: VDI 30
Control: Siemens 810 D
Electrical hand wheel: yes
Chip conveyor: yes
Total power: 25 kW
Weight of machine: 2.694 kg
Space requirement (W x D x H): 3,0 x 1,55 x 1,8 m
Spindle re-stored in 2024, Siemens options: Shopturn, peripheral connection, ShopTurn Work Step programming, transmit and shell surface transformation
Accessory: Documentation, no other accessories
Turning length: 406 mm
X: 218 mm
Z: 406 mm
Speed range: 6.000 rpm
Spindle bore: 45 mm
Turret: 12 -station
Driven tools: yes
Tool holder: VDI 30
Control: Siemens 810 D
Electrical hand wheel: yes
Chip conveyor: yes
Total power: 25 kW
Weight of machine: 2.694 kg
Space requirement (W x D x H): 3,0 x 1,55 x 1,8 m
Spindle re-stored in 2024, Siemens options: Shopturn, peripheral connection, ShopTurn Work Step programming, transmit and shell surface transformation
Accessory: Documentation, no other accessories
14
Packing machines
Air pressure: 6 bar
Transport speed: 3 - 30 mtr/min.
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m
Condition: good
Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils
Accessory: no other accessories, documentation
Air pressure: 6 bar
Transport speed: 3 - 30 mtr/min.
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m
Condition: good
Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils
Accessory: no other accessories, documentation
Transport speed: 3 - 30 mtr/min.
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m
Condition: good
Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils
Accessory: no other accessories, documentation
14
Milling machines
X: 300 mm
Y: 160 mm
Z: 340 mm
Speed range: 40 - 2000 rpm
Mounting table: 600 x 210 mm
Taper fixture: SK 40
Control: TNC 113 Digitalanzeige
Total power: 1,5 / 1,9 kW
Weight of machine: 1050 kg
Space requirement (W x D x H): 1,2 x 1,0 x 1,9 m
Condition: good
Rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head on spindle head movable 100 mm
Accessory: machine feet, documentation, counterholder, no other accessories
X: 300 mm
Y: 160 mm
Z: 340 mm
Speed range: 40 - 2000 rpm
Mounting table: 600 x 210 mm
Taper fixture: SK 40
Control: TNC 113 Digitalanzeige
Total power: 1,5 / 1,9 kW
Weight of machine: 1050 kg
Space requirement (W x D x H): 1,2 x 1,0 x 1,9 m
Condition: good
Rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head on spindle head movable 100 mm
Accessory: machine feet, documentation, counterholder, no other accessories
Y: 160 mm
Z: 340 mm
Speed range: 40 - 2000 rpm
Mounting table: 600 x 210 mm
Taper fixture: SK 40
Control: TNC 113 Digitalanzeige
Total power: 1,5 / 1,9 kW
Weight of machine: 1050 kg
Space requirement (W x D x H): 1,2 x 1,0 x 1,9 m
Condition: good
Rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head on spindle head movable 100 mm
Accessory: machine feet, documentation, counterholder, no other accessories
14
Milling machines
X: 300 mm
Y: 150 mm
Z: 340 mm
Mounting table: 600 x 210 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 1,7 kW
Digital display: 3-Achs DITRON Digital
Total power: 1,7 kW
Weight of machine: 830 kg
Space requirement (W x D x H): 1,2 x 0,9 x 1,7 m
Condition: good
good condition, ready for use
Accessory: Counterholder, dividing device
X: 300 mm
Y: 150 mm
Z: 340 mm
Mounting table: 600 x 210 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 1,7 kW
Digital display: 3-Achs DITRON Digital
Total power: 1,7 kW
Weight of machine: 830 kg
Space requirement (W x D x H): 1,2 x 0,9 x 1,7 m
Condition: good
good condition, ready for use
Accessory: Counterholder, dividing device
Y: 150 mm
Z: 340 mm
Mounting table: 600 x 210 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 1,7 kW
Digital display: 3-Achs DITRON Digital
Total power: 1,7 kW
Weight of machine: 830 kg
Space requirement (W x D x H): 1,2 x 0,9 x 1,7 m
Condition: good
good condition, ready for use
Accessory: Counterholder, dividing device
7
Accessories and spare partsBar stock carriers
Bar length: 3000
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
Bar length: 3000
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
14
Other
Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
2
LathesOther
punch set
punch set
The advert was translated automatically and some translation errors may have occurred.
1
Sanding machinesAccessories and spare parts
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
9
Accessories and spare partsOther
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
4
Milling machinesAccessories and spare parts
Working Area: 560 x 400 x 32 mm
Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
Working Area: 560 x 400 x 32 mm
Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
6
Milling machinesAccessories and spare parts
Rotary table: 360 °
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
Rotary table: 360 °
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
5
Accessories and spare partsMeasuring technology
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
14
LathesTurret lathes
Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
8
SawingBelt saws
Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
8
Sawing
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
4
Packing machines
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
5
Milling machinesOther
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
7
Packing machines
Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
12
Drilling machines and boring millsTapping machines
Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
4
Packing machines
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
3
Packing machines
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
6
Sheet metal working machinesPunching machines
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
4
Sheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
5
Sheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
5
Sheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
10
Cutting machines and equipmentLaser cutting machines
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
4
Packing machines
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
6
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
5
Sheet metal working machinesStamping and bending machines
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter