2
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Flexion modulus: 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1.5 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
Flexion modulus: 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1.5 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1.5 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
6
Metal working and machine toolsSawingCircular saws
Saw blade diameter: 500 mm
Saw blade speed: 2800 rpm
Cutting capacity 0°: Rund 180 mm, Quadratprofil 160 mm, Rechteckprofil 250 x 120 mm
Cutting capacity 45° right: Rund 120 mm, Quadratprofil 120 mm, Rechteckprofil 210 x 100 mm
Width: 1100 mm
Depth: 1450 mm
Height: 1350 mm
Weight: 490 kg
Saw blade diameter: 500 mm
Saw blade speed: 2800 rpm
Cutting capacity 0°: Rund 180 mm, Quadratprofil 160 mm, Rechteckprofil 250 x 120 mm
Cutting capacity 45° right: Rund 120 mm, Quadratprofil 120 mm, Rechteckprofil 210 x 100 mm
Width: 1100 mm
Depth: 1450 mm
Height: 1350 mm
Weight: 490 kg
Saw blade speed: 2800 rpm
Cutting capacity 0°: Rund 180 mm, Quadratprofil 160 mm, Rechteckprofil 250 x 120 mm
Cutting capacity 45° right: Rund 120 mm, Quadratprofil 120 mm, Rechteckprofil 210 x 100 mm
Width: 1100 mm
Depth: 1450 mm
Height: 1350 mm
Weight: 490 kg
5
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
5
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 8020 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1000 mm
Bending length: 8020 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 5010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Bending length: 5010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 3
No. of driven linkage assemblies: 3
Sheet insertion depth: 1000 mm
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 3
No. of driven linkage assemblies: 3
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 3
No. of driven linkage assemblies: 3
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 10
No. of driven linkage assemblies: 10
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 6550 mm
Length with electrical shear: 7200 mm
Width: 1435 mm
Height: 1460 mm
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 10
No. of driven linkage assemblies: 10
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 6550 mm
Length with electrical shear: 7200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 10
No. of driven linkage assemblies: 10
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 6550 mm
Length with electrical shear: 7200 mm
Width: 1435 mm
Height: 1460 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 4 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3800 kg
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 4 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3800 kg
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 4 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3800 kg
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 5020 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending length: 5020 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending capacity steel 400 N/mm²: 3 mm
Bending capacity Alu 190 N/mm²: 4 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Bending capacity steel 400 N/mm²: 3 mm
Bending capacity Alu 190 N/mm²: 4 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Bending capacity Alu 190 N/mm²: 4 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
5
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
1
Metal working and machine toolsSanding machinesAccessories and spare parts
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
5
Metal working and machine toolsAccessories and spare partsMeasuring technology
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
10
Metal working and machine toolsCutting machines and equipmentLaser cutting machines
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
4
Food machinesBakery-, pastry equipmentMixers
Ideal for medium-scale operations in both food and pharmaceutical manufacture, the L45IV will cut, mix and homogenize a variety of materials efficiently, reliably and fast. Variable speed controls allow for greater process flexibility. And a hardy stainless steel design makes for a long-lasting and hygienic machine that will be an invaluable asset to your production line for years to come. Technical Details Capacity: 45 lt. Speed: 600-3000rpm Power: 7.5Kw kW Dimensions: 69 x 55 x 124 cm Capacity/ Batch: 15 kg. Capacity/ Hour: 225 kg. Key Features - variable speed controls, Hygienic, heavy-duty design, Includes 45 lt. stainless steel bowl, Includes 4-knife blade, Transparent lid for visibility ? Cut, mix and homogenize, Stainless steel chassis This machine is available with a wall mounted control panel for easier cleaning and maintenance. Our four-knife blades come in a variety of shapes
Ideal for medium-scale operations in both food and pharmaceutical manufacture, the L45IV will cut, mix and homogenize a variety of materials efficiently, reliably and fast. Variable speed controls allow for greater process flexibility. And a hardy stainless steel design makes for a long-lasting and hygienic machine that will be an invaluable asset to your production line for years to come. Technical Details Capacity: 45 lt. Speed: 600-3000rpm Power: 7.5Kw kW Dimensions: 69 x 55 x 124 cm Capacity/ Batch: 15 kg. Capacity/ Hour: 225 kg. Key Features - variable speed controls, Hygienic, heavy-duty design, Includes 45 lt. stainless steel bowl, Includes 4-knife blade, Transparent lid for visibility ? Cut, mix and homogenize, Stainless steel chassis This machine is available with a wall mounted control panel for easier cleaning and maintenance. Our four-knife blades come in a variety of shapes
3
Food machinesBakery-, pastry equipmentMixers
Ideal for medium-scale operations in both food and pharmaceutical manufacture, the L65IV will cut, mix and homogenize a variety of materials efficiently, reliably and fast. Variable speed controls allow for greater process flexibility. And a hardy stainless steel design makes for a long-lasting and hygienic machine that will be an invaluable asset to your production line for years to come. Technical Details Capacity: 65 lt. Speed: 600-3000rpm Power: 11 kW Dimensions: 69 x 55 x 124 cm Capacity/ Batch: 22 kg. Capacity/ Hour: 330 kg. Key Features - variable speed controls, Hygienic, heavy-duty design, Includes 65 lt. stainless steel bowl, Includes 4-knife blade, Transparent lid for visibility ? Cut, mix and homogenize, Stainless steel chassis This machine is available with a wall mounted control panel for easier cleaning and maintenance. Our four-knife blades come in a variety of shapes
Ideal for medium-scale operations in both food and pharmaceutical manufacture, the L65IV will cut, mix and homogenize a variety of materials efficiently, reliably and fast. Variable speed controls allow for greater process flexibility. And a hardy stainless steel design makes for a long-lasting and hygienic machine that will be an invaluable asset to your production line for years to come. Technical Details Capacity: 65 lt. Speed: 600-3000rpm Power: 11 kW Dimensions: 69 x 55 x 124 cm Capacity/ Batch: 22 kg. Capacity/ Hour: 330 kg. Key Features - variable speed controls, Hygienic, heavy-duty design, Includes 65 lt. stainless steel bowl, Includes 4-knife blade, Transparent lid for visibility ? Cut, mix and homogenize, Stainless steel chassis This machine is available with a wall mounted control panel for easier cleaning and maintenance. Our four-knife blades come in a variety of shapes
7
Food machinesFruit and vegetable machines
Ideal for medium-scale operations in both food and pharmaceutical manufacture, the L65IV will cut, mix and homogonise a variety of materials efficiently, reliably and fast. Variable speed controls allow for greater process flexibility. And a hardy stainless steel design makes for a long-lasting and hygienic machine that will be an invaluable asset to your production line for years to come. Technical Details Capacity: 65 lt. Speed: 600-3000rpm Power: 11 kW Dimensions: 69 x 55 x 124 cm Capacity/ Batch: 22 kg. Capacity/ Hour: 330 kg. Key Features ? Stepless variable speed controls ? Hygienic, heavy-duty design ? Includes 65 lt. stainless steel bowl ? Includes 4-knife blade ? Transparent lid for visibility ? Cut, mix and homogonise ? Stainless steel chassis This machine is available with a wall mounted control panel for easier cleaning and maintenance. Our four-knife blades come in a variety of shapes and distribute the cutting action to
Ideal for medium-scale operations in both food and pharmaceutical manufacture, the L65IV will cut, mix and homogonise a variety of materials efficiently, reliably and fast. Variable speed controls allow for greater process flexibility. And a hardy stainless steel design makes for a long-lasting and hygienic machine that will be an invaluable asset to your production line for years to come. Technical Details Capacity: 65 lt. Speed: 600-3000rpm Power: 11 kW Dimensions: 69 x 55 x 124 cm Capacity/ Batch: 22 kg. Capacity/ Hour: 330 kg. Key Features ? Stepless variable speed controls ? Hygienic, heavy-duty design ? Includes 65 lt. stainless steel bowl ? Includes 4-knife blade ? Transparent lid for visibility ? Cut, mix and homogonise ? Stainless steel chassis This machine is available with a wall mounted control panel for easier cleaning and maintenance. Our four-knife blades come in a variety of shapes and distribute the cutting action to
8
Food machinesOther
stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins
stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins
1
Material handlingLighting technology
<p>60 watts</p><p>Light color 2700K</p><p>6000lm</p><p>230V</p><p>IP65</p><p>Tiltable also wall support wall mounting and pole mounting 60mm</p><p>Replaces: approx. 500W</p><p>Beam angle: 120°</p><p>Material: Aluminium</p><p>Estimated burning hours: 30,000 hours</p>
<p>60 watts</p>
<p>Light color 2700K</p>
<p>6000lm</p>
<p>230V</p>
<p>IP65</p>
<p>Tiltable also wall support wall mounting and pole mounting 60mm</p>
<p>Replaces: approx. 500W</p>
<p>Beam angle: 120°</p>
<p>Material: Aluminium</p>
<p>Estimated burning hours: 30,000 hours</p>
<p>Light color 2700K</p>
<p>6000lm</p>
<p>230V</p>
<p>IP65</p>
<p>Tiltable also wall support wall mounting and pole mounting 60mm</p>
<p>Replaces: approx. 500W</p>
<p>Beam angle: 120°</p>
<p>Material: Aluminium</p>
<p>Estimated burning hours: 30,000 hours</p>
1
Construction machineryPower generators
Gasoline generator
Output 2x220V, 1x 12VDC
new in box
Max 3000watts, rated 2.7KVA
Gasoline generator
Output 2x220V, 1x 12VDC
new in box
Max 3000watts, rated 2.7KVA
Output 2x220V, 1x 12VDC
new in box
Max 3000watts, rated 2.7KVA
1
Commercial vehiclesSemi-trailers and tractor unitsAccessories and spare parts
Total 1800kg carrying capacity
Total 1800kg carrying capacity
1
Agricultural machineryTires, rims and axles
Digital readout for easy reading of the set speed or spindle stroke
Smooth running through cast steel pulleysQuality ball bearings ensure high accuracy
<div>Oversized drilling table with T-grooves and coolant chutes
<div>Drilling table swivels (45o), height adjustment via rack</div>
<div>Powerful aluminum motor according to IP54</div>
<div>Accurate keyless chuck supplied as standard</div>
<div>Standard with T-grooves in the ground bottom plate</div>
<div>Ergonomic handles for comfortable working</div>
<div>Keyless chuck 1 - 16 mm /B 18</div>
<div>Drill chuck pin MK 2 / B 18</div>
<div>Right and left rotation switch</div>
<div>Digital drilling depth readout</div>
<div>Digital speed readout</div>
<div>Cross line laser device</div>
<div>Height-adjustable protective cover</div>
Digital readout for easy reading of the set speed or spindle stroke
Smooth running through cast steel pulleysQuality ball bearings ensure high accuracy
<div>Oversized drilling table with T-grooves and coolant chutes
<div>Drilling table swivels (45o), height adjustment via rack</div>
<div>Powerful aluminum motor according to IP54</div>
<div>Accurate keyless chuck supplied as standard</div>
<div>Standard with T-grooves in the ground bottom plate</div>
<div>Ergonomic handles for comfortable working</div>
<div>Keyless chuck 1 - 16 mm /B 18</div>
<div>Drill chuck pin MK 2 / B 18</div>
<div>Right and left rotation switch</div>
<div>Digital drilling depth readout</div>
<div>Digital speed readout</div>
<div>Cross line laser device</div>
<div>Height-adjustable protective cover</div>
Smooth running through cast steel pulleysQuality ball bearings ensure high accuracy
<div>Oversized drilling table with T-grooves and coolant chutes
<div>Drilling table swivels (45o), height adjustment via rack</div>
<div>Powerful aluminum motor according to IP54</div>
<div>Accurate keyless chuck supplied as standard</div>
<div>Standard with T-grooves in the ground bottom plate</div>
<div>Ergonomic handles for comfortable working</div>
<div>Keyless chuck 1 - 16 mm /B 18</div>
<div>Drill chuck pin MK 2 / B 18</div>
<div>Right and left rotation switch</div>
<div>Digital drilling depth readout</div>
<div>Digital speed readout</div>
<div>Cross line laser device</div>
<div>Height-adjustable protective cover</div>
1
Generators and MotorsAccessories and spare parts
5 core drills (38, 52, 91, 117 and 127 mm) all 170mm long2 x short and 2 x long collets (SDS-Plus and hex)Guide drillEjector pinThe set comes in an aluminum case.
5 core drills (38, 52, 91, 117 and 127 mm) all 170mm long
2 x short and 2 x long collets (SDS-Plus and hex)
Guide drill
Ejector pin
The set comes in an aluminum case.
2 x short and 2 x long collets (SDS-Plus and hex)
Guide drill
Ejector pin
The set comes in an aluminum case.