7
Food machinesOther
Larkap DMB50-0 vibratory feeder conveyor 000101-6 2000, stainless vibratory feed conveyors, adjustable vibration for product control, on stainless frame. 1Ph.
Larkap DMB50-0 vibratory feeder conveyor 000101-6 2000, stainless vibratory feed conveyors, adjustable vibration for product control, on stainless frame. 1Ph.
7
Food machinesBakery-, pastry equipmentMixers
NNP Tumbler 1000L stainless steel tumbler on frame, side discharge door, forward/reverse motion
NNP Tumbler 1000L stainless steel tumbler on frame, side discharge door, forward/reverse motion
6
Food machinesPackaging machinery
Production processes simple and easy to perform • Can seal atmospheric and vacuum packs for retort and autoclave • Can seal gas flush packs for extended shelf life purposes • Speeds of up to 12 cycles per minute • Can seal up to 4 trays at a time • Can produce packs with a contoured film cut and seal • Complete with integrated vacuum pump For all spec visit http://www.pal.co.uk/sites/default/files/PA2016MAP-V%20A4%20AW.pdf
Production processes simple and easy to perform • Can seal atmospheric and vacuum packs for retort and autoclave • Can seal gas flush packs for extended shelf life purposes • Speeds of up to 12 cycles per minute • Can seal up to 4 trays at a time • Can produce packs with a contoured film cut and seal • Complete with integrated vacuum pump For all spec visit http://www.pal.co.uk/sites/default/files/PA2016MAP-V%20A4%20AW.pdf
7
Food machinesMeat processing
Lot 431 Turbo Systems Lobe Pump Model: Obrut Serial: P238487 Stainless, mobile unit with 40mm Lobe pump and 100L Hopper See video at: https://www.youtube.com/watch?v=Rulpf6XFAP8
Lot 431 Turbo Systems Lobe Pump Model: Obrut Serial: P238487 Stainless, mobile unit with 40mm Lobe pump and 100L Hopper See video at: https://www.youtube.com/watch?v=Rulpf6XFAP8
9
Food machinesMeat processing
Lot 323 Treif Portion cutter Model: 1943 Stainless, infeed chamber 600mm length x 180mm width x 140mm depth, up to 300 cuts a minute, it is possible to cut large bone-in as well as boneless products, such as bacon, spare ribs, chops and "T-bone" steaks, or dairy products, such as cheese, either fresh, chilled or deep-frozen to - 4°C. See video at: http://www.youtube.com/watch?v=JdZeW8gCBiU
Lot 323 Treif Portion cutter Model: 1943 Stainless, infeed chamber 600mm length x 180mm width x 140mm depth, up to 300 cuts a minute, it is possible to cut large bone-in as well as boneless products, such as bacon, spare ribs, chops and "T-bone" steaks, or dairy products, such as cheese, either fresh, chilled or deep-frozen to - 4°C. See video at: http://www.youtube.com/watch?v=JdZeW8gCBiU
5
Food machinesAccessories and spare parts
Lot 86 Combina Side labeller Model: 01-120RH Pneu Wipe Serial: 0004-12 Automatic side self adhesive label applicator with pneumatic wipe on arm conveyor
Lot 86 Combina Side labeller Model: 01-120RH Pneu Wipe Serial: 0004-12 Automatic side self adhesive label applicator with pneumatic wipe on arm conveyor
5
Food machinesOther
10 KW stainless oven goes with lot number
10 KW stainless oven goes with lot number
1
Process engineeringPumps
max 20 M3 per hour
with float
220 volts
cast iron pump housing
max 20 M3 per hour
with float
220 volts
cast iron pump housing
with float
220 volts
cast iron pump housing
1
Process engineeringPumps
max 20 M3 per hour
with float
220 volts
cast iron pump housing
max 20 M3 per hour
with float
220 volts
cast iron pump housing
with float
220 volts
cast iron pump housing
1
Process engineeringPumps
max 20 M3 per hour
with float
220 volts
cast iron pump housing
max 20 M3 per hour
with float
220 volts
cast iron pump housing
with float
220 volts
cast iron pump housing
1
Process engineeringPumps
max 20 M3 per hour
with float
220 volts
cast iron pump housing
max 20 M3 per hour
with float
220 volts
cast iron pump housing
with float
220 volts
cast iron pump housing
1
Material handlingLighting technology
Led lamp 100 watt floodlight
Led lamp 100 watt floodlight
1
Generators and MotorsAccessories and spare parts
Diesel pump set with counter, filling and suction hose, automatic shut-off gun
Diesel pump set with counter, filling and suction hose, automatic shut-off gun
1
Agricultural machineryTires, rims and axles
4
Plastic processing machinesInjection molding machinesPlastic injection molding machines
KRAUSS MAFFEI KM CX 420-4300
Number of operating hours: 37,589 hours
Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN
Oil tank capacity: 1075 L
KRAUSS MAFFEI KM CX 420-4300
Number of operating hours: 37,589 hours
Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN
Oil tank capacity: 1075 L
Number of operating hours: 37,589 hours
Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN
Oil tank capacity: 1075 L
1
Conveyor technologyConveyor belts
USED CONVEYOR BELT MB
Width : 450 mm
Straight part : 700 mm band with brackets
Inclined part : 1700 mm
USED CONVEYOR BELT MB
Width : 450 mm
Straight part : 700 mm band with brackets
Inclined part : 1700 mm
Width : 450 mm
Straight part : 700 mm band with brackets
Inclined part : 1700 mm
2
Plastic processing machinesHeating and cooling systems
Year 2021
Type: RC2E 20
Rated cooling capacity: 18.8 kW - 16,200 kcal/h
Pump flow: 55 L /min
Mint condition - 6 month warranty.
Year 2021
Type: RC2E 20
Rated cooling capacity: 18.8 kW - 16,200 kcal/h
Pump flow: 55 L /min
Mint condition - 6 month warranty.
Type: RC2E 20
Rated cooling capacity: 18.8 kW - 16,200 kcal/h
Pump flow: 55 L /min
Mint condition - 6 month warranty.
4
Plastic processing machinesBlow molding machines
BLOW MOULDING MACHINE KAUTEX KBS2 – 61/60
Year 1998
Tonnage: 60 tons
Tray dimensions: 700 x 1000 mm
Max mold height: 1250 mm
Max mold width: 800 mm
Minimum mold thickness: 620 mm
Max mold opening stroke: 675 mm
Screw diameter: 100 mm
L/D ratio: 20
Maximum extrudable weight in PE: 9000 Gr
Maximum injectable volume: 12 liters
Number of parison regulation points: 64
Die Min/max diameter: 100/230
BLOW MOULDING MACHINE KAUTEX KBS2 – 61/60
Year 1998
Tonnage: 60 tons
Tray dimensions: 700 x 1000 mm
Max mold height: 1250 mm
Max mold width: 800 mm
Minimum mold thickness: 620 mm
Max mold opening stroke: 675 mm
Screw diameter: 100 mm
L/D ratio: 20
Maximum extrudable weight in PE: 9000 Gr
Maximum injectable volume: 12 liters
Number of parison regulation points: 64
Die Min/max diameter: 100/230
Year 1998
Tonnage: 60 tons
Tray dimensions: 700 x 1000 mm
Max mold height: 1250 mm
Max mold width: 800 mm
Minimum mold thickness: 620 mm
Max mold opening stroke: 675 mm
Screw diameter: 100 mm
L/D ratio: 20
Maximum extrudable weight in PE: 9000 Gr
Maximum injectable volume: 12 liters
Number of parison regulation points: 64
Die Min/max diameter: 100/230
3
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
4
Plastic processing machinesBlow molding machines
BATTENFELD FISCHER – VK 1-4
FISCHER BATTENFELD
Reference: VK 1-4
Number Of Heads: 2
Screw diameter: 60mm
L/D: 24
Thickness control: MOOG 32 point
Center distance: 100 mm
Year: 1997
In good working order
BATTENFELD FISCHER – VK 1-4
FISCHER BATTENFELD
Reference: VK 1-4
Number Of Heads: 2
Screw diameter: 60mm
L/D: 24
Thickness control: MOOG 32 point
Center distance: 100 mm
Year: 1997
In good working order
FISCHER BATTENFELD
Reference: VK 1-4
Number Of Heads: 2
Screw diameter: 60mm
L/D: 24
Thickness control: MOOG 32 point
Center distance: 100 mm
Year: 1997
In good working order
4
Plastic processing machinesInjection molding machinesPlastic injection molding machines
USED Engel Duo 940M/940H/650 combi M
Year: 2010
USED Engel Duo 940M/940H/650 combi M
Year: 2010
Year: 2010
4
Plastic processing machinesInjection molding machinesPlastic injection molding machines
In working conditions
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
In working conditions
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
_thumb.jpg "Show advert")
5
Plastic processing machinesInjection molding machinesPlastic injection molding machines
-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808
-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808