Ref. no.: 18482
Hersteller: KRAUSS MAFFEI
Year of construction: 2010

Clamping unit
Clamping force: 300 ton
Opening stroke: 820 mm
Distance between tie bars: 810 X 720 mm
Mould height min.: 480 mm
Opening width: 1300 mm

Injection unit
Screw diameter: 60 mm
Injection volume: 792 cm³
Shot weight: 720 g
Injection pressure: 2420 bar

Measurements and weight
Dimensions: 6,7 X 2,1 X 2,4 m
Machine weight: 16400 kg

Additional information & extras
Accumulator: 1 pcs

Robot
Producer: Krauss Maffei
Type: KM LRX S 250
Year: 2010

Ref. no.: 18481
Hersteller: ARBURG
Year of construction: 2004

Clamping unit
Clamping force: 60 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 200 mm
Platen size (h x v): 446 X 446 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 45 cm³
Shot weight: 40 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,5 X 1,5 X 1,7 m
Machine weight: 2330 kg

Ref. no.: 18395
Hersteller: DEMAG
Year of construction: 2007

Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 X 500 mm
Mould height min.: 250 mm
Mould height max.: 560 mm
Platen size (h x v): 750 X 750 mm

Injection unit
Screw diameter: 40 mm
Injection volume: 255 cm³
Shot weight: 230 g
Injection pressure: 2418 bar

Measurements and weight
Dimensions: 5,2 X 1,6 X 2,1 m
Machine weight: 7500 kg

Robot
Producer: Wittmann
Type: W711-1776 (doppelter x-Greifer)
Year: 2008

Ref. no.: 18244
Hersteller: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 200 ton
Opening stroke: 575 mm
Distance between tie bars: 580 X 580 mm
Mould height min.: 340 mm
Mould height max.: 790 mm
Opening width: 1365 mm
Platen size (h x v): 860 X 860 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 442 cm³
Shot weight: 400 g
Injection pressure: 1946 bar

Measurements and weight
Dimensions: 5,4 X 1,7 X 2,1 m
Machine weight: 8200 kg

Ref. no.: 18333
Hersteller: DEMAG
Year of construction: 1998

Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar

Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14300 kg

Ref. no.: 18331
Hersteller: ARBURG
Year of construction: 2001

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg

Ref. no.: 18330
Hersteller: ARBURG
Year of construction: 2003

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm

Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar

Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg

Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001

Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar

Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg

Additional information & extras
Core pull: 1 pcs

Ref. no.: 18383
Hersteller: DEMAG
Year of construction: 2008

Clamping unit
Clamping force: 420 ton
Opening stroke: 770 mm
Distance between tie bars: 820 X 820 mm
Mould height min.: 380 mm
Mould height max.: 825 mm
Platen size (h x v): 1200 X 1100 mm

Injection unit
Screw diameter: 60 mm
Injection volume: 890 cm³
Shot weight: 810 g
Injection pressure: 2420 bar

Measurements and weight
Dimensions: 8,2 X 2,2 X 2,4 m
Machine weight: 22300 kg

Additional information & extras
Core pull: 4 pcs
Air valve: 7 pcs
Hot runner systems: 8 pcs.

Ref. no.: 18368
Hersteller: ARBURG
Year of construction: 1997

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 300 mm
Mould height max.: 550 mm
Platen size (h x v): 446 X 446 mm

Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 75 g
Injection pressure: 2200 bar

Measurements and weight
Dimensions: 3,25 x 1.15 x 2,0 m
Machine weight: 2250 kg

Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar

Measurements and weight
Machine weight: 13500 kg

Robot
Producer: Wittman
Type: W743
Year: 2009

Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm

Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm

2 hydraulic core pull

Dimensions:
4960 x 3656 x 3360mm

Weight: 14500KG

Vertical injection moulding machine REP super Sancar
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm

Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot

Billion 200 T injection molding machine
Model : H780 / 200
Year : 1998
Screw diameter: 50mm
Injectable volume : 422 cm3
Injection pressure: 1843 bars
L / D: 22.3
Clamping force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Distance between tie bars (h x v): 610mm x 610mm
Ejection stroke: 150mm
Dimension : 6,1 m x 1,9m x 2,35m
Weight : 9.5 t

Injection moulding machine SANDRETTO serie 9
Clamping force : 230 T
Year : 2001
Screw diameter is 50 mm.
Volume injectable : 475 cm3
Platen dimensions : 860 x 860 mm
Distance between tie bar is : 570 x 570 mm
Dimension are : 6,67 m x 2,22 m x 1,82 m
Weight of the machine : 10 200 KG

Billion 140 T HERCULE injection molding machine
Model : H780 / 140
Year : 2000
Screw diameter: 45mm
Injectable volume : 220 cm3
Injection pressure: 2100 bars
Clamping force: 1400 KN
Platen dimension : 650 x 650 mm
Distance between tie bar : 430 x 430 mm
Platen dimensions (h x v): 610mm x 610mm
Dimension : 5,1 m x 1,8 m x 2,20m
Weight : 7 T

SANDRETTO serie 8 790-200
Clamping force : 200 T
Distance between tie bar : 510 x 510 mm
Mould thickness min / max : 210 - 630 mm
Opening strocke : 550 mm
Injectable volume : 546 cm3
Presure on the plastic material max : 1450 bars
Screw diameter : 55 mm

Injection moulding machine in good condition BM BIRAGHI sintesi 150
Screw diameter : 50 mm
Clamping force : 150 T
Distance between tie bar : 460 x 460 mm
470 mm opening stroke
150 mm min opening mould

Injection moulding machine KRAUSS MAFFEI KM 65-1350
Clamping force : 65 T
Year 1996
Screw diameter : 30 mm
With EUROMAP 12

INJECTION MOULDING MACHINE KRAUSS MAFFEI 500 H 3500 C1
Working hours : 51 850 hours
Clamping force : 500 T
Year : 2000
Screw diameter : 90 mm
Miximum injection volume : 1953 cm3
Injection pressure max : 1742 bars
Platen dimension : 1270 x 1200 mm
Distance between tie bar : 900 x 800 mm
Mould min thickness : 480 mm
Opening strocke max : 1170 mm
Distance max between platen : 1650 mm
Ejection stroke : 250 mm
Equipement :
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen

HMI / new control unit
New metering motor
Locking unit redone
Machine calibration done
New hydraulic hoses

NEGRI BOSSI 480 T
Clamping Force: 480T
reference : 4800 H 3800
Screw diameter: 90 mm
L/D ratio: 20
Maximum material pressure: 1500 bar
Injection volume : 2160 cm3
Injection capacity: 2270 g
Injection speed: 500mm/s
Plastification: 105 g/s
Clearence between tie bars (H x V): 710 x 800
Platen dimensions (H x V): 1190 x 1150
Max mold thickness: 850mm
Minimum mold thickness: 200mm
Ejection stroke: 300mm
Air cores: 2
Hydraulic cores: 2
+ 1 Wittmann Robot
Working hours : 70 000 h

Sandretto injection moulding machine MEGA T 610 T
Reference : 4435 - 610
Command : SEF 100

year :1996
Working hours : 47 200 h
Screw diameter : 80 mm
Volume injectable : 2237 cm3
Injection pressure : 1960 bars
Distance between tie bar : 850 x 850 mm
Platen dimensions : 1260 x 1260 mm
Mould thickness : min : 300 – max : 1000 mm

Interface robot
2 core pull
2 air valve

Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997

Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar

Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg

Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006

Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm

Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar

Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg

Ref. no.: 18138
Hersteller: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm

Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar

Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg

Ref. no.: 17514
Hersteller: BILLION
Year of construction: 2011

Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar

Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg

Additional information & extras
Hot runner systems: 6 pcs.

Ref. no.: 17507
Hersteller: DEMAG
Year of construction: 1998

Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar

Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg

Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005

Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm

Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar

Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg

KRAUSS MAFFEI KM CX 420-4300

Number of operating hours: 37,589 hours

Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN

Oil tank capacity: 1075 L

Injection moulding machine BILLION 200T Hercule
Year: 1998
Model: H780/200
Screw diameter: 50mm
Injection volume: 422 cm3
Injection pressure: 1843 bars
L/D: 22.3
Max locking force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Between vertical and horizontal columns: 610mm x 610mm
Column diameter: 100 mm
Maximum ejection stroke: 150 mm
Dimensions: 6.10 x 1.90 x 2.35m
Weight: 9.5T

BILLION 50 T PROXIMA press
Year: 2001
Model: H200/50
Screw diameter: 30 mm
Injection volume: 106 cm3
Injection pressure: 1910 bar
Maximum locking force: 500 KN
Dimensions of the trays: 580 mm x 520 mm
Min/max mold thickness: 180/360 mm
Dimensions: 3.52 x 1.17 x 1.72m
Weight: 3.5T

BILLION HERCULES H2000/320 - 320T

Year August 1999
Screw diameter: 80 mm
Injection volume: 1433 cm3
Passage between columns: 735 x 735 mm
Mold thickness: 330 to 680 mm
Weight: 16.5T
Dimensions: 7.88 x 2.02 x 2.60m
Sold with a Robot SEPRO 4030 stroke of 5500 mm visual 1 / year 2007

Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg

USED Engel ​D​uo 940M/940H/650 combi M

Year: 2010

BILLION 200 TONS H1300/200 Injection molding machine

For specifications see attached PDF

ARBURG 130 TONS.

- Year 2001
- Type : 470 C - 1300 - 675
- Screw diameter : 40 mm
- 1 corepuller
- Interface robot
- In between columns : 470 x 470 mm

SUMITOMO ELECTRICAL 75 TONS

- Year : 2000
- Type : SE75S
- In between columns : 360 x 360 mm
- Opening stroke : 300 mm
- Screw diameter :25 mm
- Injection volume : 56 cm3

KRAUSSMAFFEI 200 T -

- Type : KM700-200
- Year : 1998
- In between columns : 560 x 560 mm
- Screw diameter : 45 mm
- Ijnection volume : 305 cm3
- 3 core
- Interface robot
- Equiped with a peak cons
- 1 accumulator
- 8 heating zones

NEGRI-BOSSI 370 TONS

Type: 3700H-2200

Specifications see attached PDF

USED NESTAL 150 TONS

N580/150-MP

See attached PDF

BILLION Bi material H6860/2000-550 TONS

Working hours: 32000
Very good condition

INJECTION 1: H6860

Screw diameter: 105 mm
Ration L/D - 20
Injectable volume: Cm3 4546
Injection pressure: 1509 BAR
Max injection ration: 2160 Cm3/s
Max speed screw rotation Min-1 150

INJECTION 2: H200

Screw diameter: 70mm
ration L/D - 23,1
Injectable volume: 1097 Cm3
Injection pressure :1822 BAR
Max injection ration: 845 Cm3/s
Max speed screw rotation Min-1 200

CLAMPING
Clamping force: 550 Tons
MinimumThickness mould: 300 mm
Maximun Thickness mould: 1000 mm
Opening stroke: 1100 mm
Plates dimensions H x V: 1350 x 1350 mm
In between columns H x V : 930 x 930 mm
Maximun distance between pltes : 2100 mm

Weight
Total weight kg: 26500
Clamping weight kg:15000
Injection weight kg: 14800

In working conditions
Working hours: 12.022

Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN

Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN

GENERAL INFORMATIONS

Dimensions: 6200 x 2150 x Ht.2400 mm
Weight: 13500 kg
Engine power: 75 kw

- INJECTION UNIT
Plasticising capacity: (PS) 682 gr
Ration length diameter: 23,7
Injection pressure: 2000 bar
Scew diametre: 60 mm

- CLOSING UNIT
Plates dimensions: 995 x 1050 mm
In between columns: 630 x 630 mm
Clamping force: 280 TONS

COMMENTS
workings hours: 37000
Interface robot - 1 core