13
Metal working and machine toolsLathesCNC lathes
Swing diameter over bed: 430 mm
Workpiece weight: max. 30 kg
Swing diameter over cross slide: 210 mm
Length between centres: 700 mm
Turning length: max. 510 mm
Speed range: 6.300 rpm
Collet chuck: for 173 E collets
Spindle bore: 45 mm
Jaw chuck Ø max.: 160
Turret: 12 -station
Driven tools: no
Tailstock: yes
Control: Siemens 810 D
Chip conveyor: no
Total power: 17 kW
Weight of machine: 2.600 kg
Space requirement (W x D x H): 2,7 x 2,0 x 2,0 m
Condition: very good
Hours of operation: 24.602 h
Well-maintained machine, rarely used, from a workshop for the disabled, the arm in the parts catcher machine has been removed. This was sent to us via DHL and got lost. Search request with DHL is still ongoing
Accessory: Documentation
Swing diameter over bed: 430 mm
Workpiece weight: max. 30 kg
Swing diameter over cross slide: 210 mm
Length between centres: 700 mm
Turning length: max. 510 mm
Speed range: 6.300 rpm
Collet chuck: for 173 E collets
Spindle bore: 45 mm
Jaw chuck Ø max.: 160
Turret: 12 -station
Driven tools: no
Tailstock: yes
Control: Siemens 810 D
Chip conveyor: no
Total power: 17 kW
Weight of machine: 2.600 kg
Space requirement (W x D x H): 2,7 x 2,0 x 2,0 m
Condition: very good
Hours of operation: 24.602 h
Well-maintained machine, rarely used, from a workshop for the disabled, the arm in the parts catcher machine has been removed. This was sent to us via DHL and got lost. Search request with DHL is still ongoing
Accessory: Documentation
Workpiece weight: max. 30 kg
Swing diameter over cross slide: 210 mm
Length between centres: 700 mm
Turning length: max. 510 mm
Speed range: 6.300 rpm
Collet chuck: for 173 E collets
Spindle bore: 45 mm
Jaw chuck Ø max.: 160
Turret: 12 -station
Driven tools: no
Tailstock: yes
Control: Siemens 810 D
Chip conveyor: no
Total power: 17 kW
Weight of machine: 2.600 kg
Space requirement (W x D x H): 2,7 x 2,0 x 2,0 m
Condition: very good
Hours of operation: 24.602 h
Well-maintained machine, rarely used, from a workshop for the disabled, the arm in the parts catcher machine has been removed. This was sent to us via DHL and got lost. Search request with DHL is still ongoing
Accessory: Documentation
7
Metal working and machine toolsAccessories and spare partsBar stock carriers
Bar length: 3000
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
Bar length: 3000
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m
Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242
Accessory: Documentation
14
Metal working and machine toolsMilling machinesOther
X: 420 mm
Y: 330 mm
Z: 400 mm
Table size: 850 x 325 mm
Speed range: 0 - 5000 rpm
Taper fixture: SK 40
Rapid: 12 m/min
Tool changer: 12 -station
Tool holder: 40 SK
Max. weight tool: 5 kg
Max. length tool: 220 mm
Tool diameter: 63 mm
Control: Sinumerik 810 M
Hours of operation: 40484 h
Total power: 15 kW
Weight of machine: 3200 kg
Space requirement (W x D x H): 2,4 x 2,3 x 2,45 m
Condition: good, ready for use
one tool station is currently defective, nice compact machine, can be used immediately
Accessory: HILMA SM 125 machine vice, various holders in the magazine, documentation, machine feet
X: 420 mm
Y: 330 mm
Z: 400 mm
Table size: 850 x 325 mm
Speed range: 0 - 5000 rpm
Taper fixture: SK 40
Rapid: 12 m/min
Tool changer: 12 -station
Tool holder: 40 SK
Max. weight tool: 5 kg
Max. length tool: 220 mm
Tool diameter: 63 mm
Control: Sinumerik 810 M
Hours of operation: 40484 h
Total power: 15 kW
Weight of machine: 3200 kg
Space requirement (W x D x H): 2,4 x 2,3 x 2,45 m
Condition: good, ready for use
one tool station is currently defective, nice compact machine, can be used immediately
Accessory: HILMA SM 125 machine vice, various holders in the magazine, documentation, machine feet
Y: 330 mm
Z: 400 mm
Table size: 850 x 325 mm
Speed range: 0 - 5000 rpm
Taper fixture: SK 40
Rapid: 12 m/min
Tool changer: 12 -station
Tool holder: 40 SK
Max. weight tool: 5 kg
Max. length tool: 220 mm
Tool diameter: 63 mm
Control: Sinumerik 810 M
Hours of operation: 40484 h
Total power: 15 kW
Weight of machine: 3200 kg
Space requirement (W x D x H): 2,4 x 2,3 x 2,45 m
Condition: good, ready for use
one tool station is currently defective, nice compact machine, can be used immediately
Accessory: HILMA SM 125 machine vice, various holders in the magazine, documentation, machine feet
6
Metal working and machine toolsMilling machines
Revs: 63 - 3150 (18) r.p.m.
Working area: 700 x 500 x 500 mm
Table: 900 x 500 mm
Motor: 6.6 kW
Maximal table load: 500 kg
Quill travel: 100 mm
Length: 2150 mm
Width: 2220 mm
Height: 2120 mm
Weight: 2550 kg
Revs: 63 - 3150 (18) r.p.m.
Working area: 700 x 500 x 500 mm
Table: 900 x 500 mm
Motor: 6.6 kW
Maximal table load: 500 kg
Quill travel: 100 mm
Length: 2150 mm
Width: 2220 mm
Height: 2120 mm
Weight: 2550 kg
Working area: 700 x 500 x 500 mm
Table: 900 x 500 mm
Motor: 6.6 kW
Maximal table load: 500 kg
Quill travel: 100 mm
Length: 2150 mm
Width: 2220 mm
Height: 2120 mm
Weight: 2550 kg