Please wait...

1
Cutting length: 6080 mm Max. thickness - mild steel: 13 mm Max. thickness - stainless steel: 10 mm Gap in side frame: 350 mm Strokes: 10 1/min Cutting angle: 0,5 - 2,5 ° Number of downholders: 29 pcs. Pressure of downholder: 58 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 37 kW Oiltank: 400 l Support arms: 6 pcs. Table height: 950 mm Table width: 650 mm Table length: 6375 mm Length: 7400 mm Width: 2200 mm Total width with support arm und protection fence: 3700 mm Height: 2900 mm Weight: 33820 kg
Cutting length: 6080 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2,5 °
Number of downholders: 29 pcs.
Pressure of downholder: 58 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 400 l
Support arms: 6 pcs.
Table height: 950 mm
Table width: 650 mm
Table length: 6375 mm
Length: 7400 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2900 mm
Weight: 33820 kg
1
Cutting length: 6080 mm Max. thickness - mild steel: 6 mm Max. thickness - stainless steel: 4 mm Gap in side frame: 350 mm Strokes: 10 1/min Cutting angle: 0,5 - 2 ° Number of downholders: 29 pcs. Pressure of downholder: 20 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 22 kW Oiltank: 200 l Support arms: 5 pcs. Table height: 900 mm Table width: 630 mm Table length: 6370 mm Length: 7300 mm Width: 2150 mm Total width with support arm und protection fence: 3400 mm Height: 2750 mm Weight: 25500 kg
Cutting length: 6080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
1
Cutting length: 3080 mm Max. thickness - mild steel: 6 mm Max. thickness - stainless steel: 4 mm Gap in side frame: 350 mm Strokes: 20 1/min Cutting angle: 0,5 - 2 ° Number of downholders: 16 pcs. Pressure of downholder: 20 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 11 kW Oiltank: 125 l Support arms: 3 pcs. Table height: 820 mm Table width: 494 mm Table length: 3280 mm Length: 4100 mm Width: 2050 mm Total width with support arm und protection fence: 3650 mm Height: 1950 mm Weight: 7980 kg
Cutting length: 3080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 20 1/min
Cutting angle: 0,5 - 2 °
Number of downholders: 16 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 11 kW
Oiltank: 125 l
Support arms: 3 pcs.
Table height: 820 mm
Table width: 494 mm
Table length: 3280 mm
Length: 4100 mm
Width: 2050 mm
Total width with support arm und protection fence: 3650 mm
Height: 1950 mm
Weight: 7980 kg
2
Swing over bed: 500 mm Distance between centers: 1500 mm Centre height: 250 mm Spindle bore: 80 mm swing over cross slide: 300 mm Width of bed: 400 mm Spindle nose / DIN55027: 8 Spindle taper: 80 M Spindle speed steps: 21 Spindle revs: Array rpm Number of feeds: 120 Longitudinal feed range: 0.04 - 12 mm/r Cross feed range: 0.02 - 6 mm/r Number of threads: 64 Metric thread range: 0.5 - 120 mm Inch thread range: Array Tpi Module thread range: 0.125 - 30 DP thread range: Array Cross slide travel: 315 mm Top slide travel: 130 mm Tailstock quill diameter: 90 mm Tailstock quill taper: 5 MK Tailstock travel: 230 mm Motor power: 7 kW Length: 3100 mm Width: 1250 mm Height: 1400 mm Weight: 2820 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
2
Cutting length: 3100 mm Max. thickness - mild steel: 16 mm Max. thickness - stainless steel: 10 mm Gap in side frame: 350 mm Strokes: 10 1/min Cutting angle: 2 ° Number of downholders: 14 pcs. Pressure of downholder: 61 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 37 kW Oiltank: 410 l Support arms: 2 pcs. Table height: 818 mm Table width: 550 mm Table length: 3580 mm Length: 4550 mm Width: 2250 mm Total width with support arm und protection fence: 3825 mm Height: 2250 mm Weight: 15000 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
2
Cutting length: 4100 mm Max. thickness - mild steel: 13 mm Max. thickness - stainless steel: 8 mm Gap in side frame: 350 mm Strokes: 8 1/min Cutting angle: 1.75 ° Number of downholders: 18 pcs. Pressure of downholder: 62 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 30 kW Oiltank: 330 l Support arms: 3 pcs. Table height: 818 mm Table width: 550 mm Table length: 4520 mm Length: 5350 mm Width: 2250 mm Total width with support arm und protection fence: 3650 mm Height: 2250 mm Weight: 16300 kg
Cutting length: 4100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg
2
Cutting length: 3100 mm Max. thickness - mild steel: 13 mm Max. thickness - stainless steel: 8 mm Gap in side frame: 50 mm Strokes: 13 1/min Cutting angle: 1.75 ° Number of downholders: 16 pcs. Pressure of downholder: 37 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 30 kW Oiltank: 330 l Support arms: 2 pcs. Table height: 840 mm Table width: 600 mm Table length: 3550 mm Length: 4280 mm Width: 2300 mm Total width with support arm und protection fence: 3600 mm Height: 2350 mm Weight: 12500 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
2
Cutting length: 3100 mm Max. thickness - mild steel: 10 mm Max. thickness - stainless steel: 6 mm Gap in side frame: 50 mm Strokes: 13 1/min Cutting angle: 1.5 ° Number of downholders: 16 pcs. Pressure of downholder: 22 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 22 kW Oiltank: 200 l Support arms: 2 pcs. Table height: 865 mm Table width: 580 mm Table length: 3515 mm Length: 4200 mm Width: 2250 mm Total width with support arm und protection fence: 3600 mm Height: 2100 mm Weight: 9300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
2
Cutting length: 4100 mm Max. thickness - mild steel: 6 mm Max. thickness - stainless steel: 4 mm Gap in side frame: 50 mm Strokes: 12 1/min Cutting angle: 1.5 ° Number of downholders: 20 pcs. Pressure of downholder: 17 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 15 kW Oiltank: 200 l Support arms: 3 pcs. Table height: 865 mm Table width: 580 mm Table length: 4510 mm Length: 5230 mm Width: 2300 mm Total width with support arm und protection fence: 3600 mm Height: 2150 mm Weight: 11460 kg
Cutting length: 4100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg
6
Max. thickness - mild steel: 4 mm Throat depth: 200 mm Shaft length: 300 mm Tools: 4 pcs. Rolls diameter: 126 mm Motor: 2.2 kW Revs: 10 1/min Length: 1475 mm Width: 550 mm Height: 1200 mm Weight: 460 kg
Max. thickness - mild steel: 4 mm
Throat depth: 200 mm
Shaft length: 300 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Motor: 2.2 kW
Revs: 10 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 460 kg
4
Max. thickness - mild steel: 2.5 mm Throat depth: 160 mm Shaft length: 250 mm Tools: 4 pcs. Rolls diameter: 96 mm Motor: 1.5 kW Revs: 13 1/min Length: 1475 mm Width: 550 mm Height: 1200 mm Weight: 320 kg
Max. thickness - mild steel: 2.5 mm
Throat depth: 160 mm
Shaft length: 250 mm
Tools: 4 pcs.
Rolls diameter: 96 mm
Motor: 1.5 kW
Revs: 13 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 320 kg
2
Metal working and machine toolsSheet metal working machinesBeading machines
Max. thickness - mild steel: 1.2 mm Throat depth: 100 mm Shaft length: 140 mm Tools: 7 pcs. Rolls diameter: 62 mm Length: 560 mm Width: 220 mm Height: 500 mm Weight: 50 kg
Max. thickness - mild steel: 1.2 mm
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 7 pcs.
Rolls diameter: 62 mm
Length: 560 mm
Width: 220 mm
Height: 500 mm
Weight: 50 kg
2
Metal working and machine toolsSheet metal working machinesOther
Tube diameter: 20 - 76,1 Max. wall thickness: 3 mm Max. wall thickness stainless steel: 2.5 mm Weight: 7 kg
Tube diameter: 20 - 76,1
Max. wall thickness: 3 mm
Max. wall thickness stainless steel: 2.5 mm
Weight: 7 kg
5
Metal working and machine toolsSheet metal working machinesPlasma cutting machines
Working area: 1000x2000 mm Plasma source: HYPERTHERM Powermax 45 Max. thickness - mild steel: 6 mm Max. piercing thickness - mild steel: 12 mm Max. tickness for separating cut: 25 mm Recommended thickness (unalloyed steel):: 4 mm Current: 45 A Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A Rapid speed: 24 m/min Repeat accuracy: unter 1/10 mm Volume water tray:: 300 lt Max. weight on table: 400 kg/m² Length: 2560 mm Width: 1460 mm Height: 1500 mm Weight: 400 kg
Working area: 1000x2000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
4
Working area: 2000x6000 mm Plasma source: Hypertherm XPR 170 CORE Max. thickness - mild steel: 60 mm Max. thickness - stainless steel: 38 mm Max. thickness - aluminium: 38 mm Max. piercing thickness - mild steel: 35 mm Max. piercing thickness - stainless steel: 22 mm Max. piercing thickness - aluminium: 25 mm Current: 170 A Max. cutting speed: 12 m/min Positioning speed: 35 m/min Weight: 6000 kg
Working area: 2000x6000 mm
Plasma source: Hypertherm XPR 170 CORE
Max. thickness - mild steel: 60 mm
Max. thickness - stainless steel: 38 mm
Max. thickness - aluminium: 38 mm
Max. piercing thickness - mild steel: 35 mm
Max. piercing thickness - stainless steel: 22 mm
Max. piercing thickness - aluminium: 25 mm
Current: 170 A
Max. cutting speed: 12 m/min
Positioning speed: 35 m/min
Weight: 6000 kg
1
pressing capacity: 150 to Stroke: 300 mm Ram: 950x650 mm Table: 1200x750 mm Daylight: 550 mm Rapid speed: 100 mm/s Working speed: 5 mm/s Retraction speed: 165 mm/s Motor: 11 kW Length: 2200 mm Width: 2200 mm Height: 3250 mm Weight: 8200 kg
pressing capacity: 150 to
Stroke: 300 mm
Ram: 950x650 mm
Table: 1200x750 mm
Daylight: 550 mm
Rapid speed: 100 mm/s
Working speed: 5 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Length: 2200 mm
Width: 2200 mm
Height: 3250 mm
Weight: 8200 kg
1
pressing capacity: 160 to Stroke: 400 mm Ram: 1000x680 mm Table: 1000x750 mm Daylight: 765 mm Rapid speed: 250 mm/s Working speed: 10-20 mm/s Motor: 22 kW Length: 2400 mm Width: 1525 mm Height: 3900 mm Weight: 10500 kg
pressing capacity: 160 to
Stroke: 400 mm
Ram: 1000x680 mm
Table: 1000x750 mm
Daylight: 765 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 22 kW
Length: 2400 mm
Width: 1525 mm
Height: 3900 mm
Weight: 10500 kg
1
pressing capacity: 100 to Stroke: 400 mm Ram: 850x630 mm Table: 850x640 mm Daylight: 685 mm Rapid speed: 250 mm/s Working speed: 10-20 mm/s Motor: 11 kW Length: 2030 mm Width: 1150 mm Height: 3565 mm Weight: 7700 kg
pressing capacity: 100 to
Stroke: 400 mm
Ram: 850x630 mm
Table: 850x640 mm
Daylight: 685 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 11 kW
Length: 2030 mm
Width: 1150 mm
Height: 3565 mm
Weight: 7700 kg
6
Swing over bed: 1020 mm Distance between centers: 2000 mm Centre height: 510 mm Spindle bore: 358 mm swing over cross slide: 770 mm Width of bed: 560 mm Spindle taper: 361 M Spindle speed steps: 12 Spindle revs: 6,3 - 315 rpm Number of feeds: 152 Longitudinal feed range: 0.039 - 15 mm/r Cross feed range: 0.02 - 7.5 mm/r Number of threads: 76 Metric thread range: 0.5 - 150 mm Inch thread range: 60 - 1/5 Tpi Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 505 mm Top slide travel: 270 mm Tailstock quill diameter: 105 mm Tailstock quill taper: 6 MK Tailstock travel: 225 mm Motor power: 18 kW Weight: 6400 kg
Swing over bed: 1020 mm
Distance between centers: 2000 mm
Centre height: 510 mm
Spindle bore: 358 mm
swing over cross slide: 770 mm
Width of bed: 560 mm
Spindle taper: 361 M
Spindle speed steps: 12
Spindle revs: 6,3 - 315 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 505 mm
Top slide travel: 270 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 18 kW
Weight: 6400 kg
5
Swing over bed: 800 mm Distance between centers: 2000 mm Centre height: 400 mm Spindle bore: 260 mm swing over cross slide: 560 mm Width of bed: 560 mm Spindle taper: 318 M Spindle speed steps: 12 Spindle revs: 8 - 400 rpm Number of feeds: 152 Longitudinal feed range: 0.039 - 15 mm/r Cross feed range: 0.02 - 7.5 mm/r Number of threads: 76 Metric thread range: 0.5 - 150 mm Inch thread range: 60 - 1/5 Tpi Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock quill taper: 6 MK Tailstock travel: 225 mm Motor power: 11 kW Weight: 6000 kg
Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 260 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6000 kg
5
pressing capacity: 150 to Bending length: 1520 mm Stroke: 300 mm rapid speed Y-axis: 9 mm/s Working speed Y-axis: 5 Retraction speed: 10 mm/s Max. bending capacity (mild steel): 10 mm Hole in table: 100 mm Hole distance: 190 mm Length: 2630 mm Width: 1000 mm Height: 2450 mm Weight: 3270 kg
pressing capacity: 150 to
Bending length: 1520 mm
Stroke: 300 mm
rapid speed Y-axis: 9 mm/s
Working speed Y-axis: 5
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
3
Metal working and machine toolsSheet metal working machinesFeed straighteners
Min. coil inner diameter: 400 mm Max. Coil inner diameter: 700 Max. coil width: 1500 mm Length: 2050 mm Width: 820 mm Height: 1000 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
1
pressing capacity: 200 to Stroke: 500 mm Space between columns: 1250x1000 mm Daylight: 600 mm Rapid speed: 25 mm/s Working speed: 3 mm/s Motor: 7.5 kW Length: 1550 mm Width: 1300 mm Height: 2700 mm
pressing capacity: 200 to
Stroke: 500 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 25 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 1550 mm
Width: 1300 mm
Height: 2700 mm
9
Saw frame: Pivot frame Band dimensions: 3160x27x0,9 mm Band speed continous: 20-100 m/min Cutting capacity 0° round: 270 mm Cutting capacity 0° square: 270 mm Cutting capacity 0° flat: 340 x 220 mm Cutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mm Cutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mm Cutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mm Working height: 910 mm Hydraulic motor: 0.37 kW Motor: 1.5 kW Coolant pump motor: 0.12 kW Length: 1730 mm Width: 770 mm Height: 1460 mm Weight: 476 kg
Saw frame: Pivot frame
Band dimensions: 3160x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 270 mm
Cutting capacity 0° square: 270 mm
Cutting capacity 0° flat: 340 x 220 mm
Cutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mm
Cutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mm
Cutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mm
Working height: 910 mm
Hydraulic motor: 0.37 kW
Motor: 1.5 kW
Coolant pump motor: 0.12 kW
Length: 1730 mm
Width: 770 mm
Height: 1460 mm
Weight: 476 kg
6
Saw frame: Pivot frame Band dimensions: 2730x27x0,9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 230 mm Cutting capacity 0° square: 230 mm Cutting capacity 0° flat: 320x130 mm Cutting capacity 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160 mm Cutting capacity 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100 mm Cutting capacity - 45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100 mm Working height: 760 mm Hydraulic motor: 0.37 kW Motor: 1.3 kW Coolant pump motor: 0.12 kW Length: 1350 mm Width: 700 mm Height: 1300 mm Weight: 430 kg
Saw frame: Pivot frame
Band dimensions: 2730x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 230 mm
Cutting capacity 0° square: 230 mm
Cutting capacity 0° flat: 320x130 mm
Cutting capacity 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160 mm
Cutting capacity 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100 mm
Cutting capacity - 45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100 mm
Working height: 760 mm
Hydraulic motor: 0.37 kW
Motor: 1.3 kW
Coolant pump motor: 0.12 kW
Length: 1350 mm
Width: 700 mm
Height: 1300 mm
Weight: 430 kg
5
Swing over bed: 800 mm Distance between centers: 2000 mm Centre height: 400 mm Spindle bore: 315 mm swing over cross slide: 560 mm Width of bed: 560 mm Spindle taper: 318 M Spindle speed steps: 12 Spindle revs: 8 - 400 rpm Number of feeds: 152 Longitudinal feed range: 0.039 - 15 mm/r Cross feed range: 0.02 - 7.5 mm/r Number of threads: 76 Metric thread range: 0.5 - 150 mm Inch thread range: 60 - 1/5 Tpi Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock quill taper: 6 MK Tailstock travel: 225 mm Motor power: 11 kW Weight: 6100 kg
Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 315 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6100 kg
1
Weight of machine: 7 kg Height adjustable, 3 pieces available, height 0.94 m
Weight of machine: 7 kg

Height adjustable, 3 pieces available, height 0.94 m
1
Weight of machine: 10 kg
Weight of machine: 10 kg
10
Metal working and machine toolsLathesCenter lathes and spindle lathes

WEILER COMMODOR L&Z Spindeldrehmaschine-Drehlänge 1000mm-Drehdurchmesser max. 160mmStangendurchlass 56mm-Drehzahlbereich 25-2000 U/min-Automatische Längs / Planvorschübe-Gewinde Metrisch / Zoll /usw.-Reitstock Mk4-Dreibackenfutter ca. 250mm-Multifixgrundhalter mit Einsatz-Kühlmitteleinrichtung-Elektrischer Futterschutz-Spänerückwand-Maschinendokumentation-Guter betriebsbereiter ZustandAbmaße:GpdpzgLxBxH 2,5x1,3x1,7 Meter / Gewicht 1500Kg
WEILER COMMODOR L&Z Spindeldrehmaschine


-Drehlänge 1000mm
-Drehdurchmesser max. 160mm
Stangendurchlass 56mm
-Drehzahlbereich 25-2000 U/min
-Automatische Längs / Planvorschübe
-Gewinde Metrisch / Zoll /usw.
-Reitstock Mk4
-Dreibackenfutter ca. 250mm
-Multifixgrundhalter mit Einsatz
-Kühlmitteleinrichtung
-Elektrischer Futterschutz
-Spänerückwand
-Maschinendokumentation
-Guter betriebsbereiter Zustand

Abmaße:
Gpdpzg
LxBxH 2,5x1,3x1,7 Meter / Gewicht 1500Kg
8
Grinding length: 1500 mm Grinding width: 600 mm Grinding hight: 400 mm Table load: 950 kg Table size: 1900 x 550 mm Magnetic table: 1500 x 600 mm Grinding wheel dimensions: 400 x 100 x 127 mm Spindle speed: 1000 - 3450 rpm Spindle drive: 10 - 34 kW Weight of machine: 6.700 kg Travel distances 1575 x 560, overhauled by Wema Service in 2012 Accessory: balancing device, 4 grinding wheels, 2 holders
Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg

Travel distances 1575 x 560, overhauled by Wema Service in 2012

Accessory: balancing device, 4 grinding wheels, 2 holders
8
Grinding length: 600 mm Grinding width: 375 mm Magnetic table: 600 x 350 mm Workpiece hight: 375 mm Weight of machine: 3000 kg little used, from a workshop for the disabled, travel distances 750 x 350 Accessory: balancing device, 1 grinding wheel, 2 holders
Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg

little used, from a workshop for the disabled, travel distances 750 x 350

Accessory: balancing device, 1 grinding wheel, 2 holders
4
Weight of machine: 18 kg Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm
Weight of machine: 18 kg
Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m

was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm
10
Metal working and machine toolsMachining centersMachining centers horizontal
x-Weg: . mmy-Weg: . mmz-Weg: . mmSteuerung: SiemensTyp: 840 DPalettengröße: mmDrehtisch: °Drehzahl: U/minTischbelastung: kgSpindelaufnahme ISO: 50Werkzeugwechsler: Pos.Vorschub: mm/minKühlung durch die Spindel: barGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: . mm
y-Weg: . mm
z-Weg: . mm
Steuerung: Siemens
Typ: 840 D
Palettengröße: mm
Drehtisch: °
Drehzahl: U/min
Tischbelastung: kg
Spindelaufnahme ISO: 50
Werkzeugwechsler: Pos.
Vorschub: mm/min
Kühlung durch die Spindel: bar
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsSanding machinesCylindrical grinding machines
Schleifdurchmesser: . mmSchleiflänge: 2500 mmWerkstückgewicht: . kgSchleifscheibendurchmesser: mmSpannung: VGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Schleifdurchmesser: . mm
Schleiflänge: 2500 mm
Werkstückgewicht: . kg
Schleifscheibendurchmesser: mm
Spannung: V
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
3
Metal working and machine toolsWelding machinesOther
Länge: . mmHöhe: . mmVolt: U0 20-66 VAmpere: I1 40-52
Länge: . mm
Höhe: . mm
Volt: U0 20-66 V
Ampere: I1 40-52
2
Metal working and machine toolsWelding machinesOther
Länge: . mmHöhe: . mmVolt: U0 20-66 VAmpere: I1 35-52 A
Länge: . mm
Höhe: . mm
Volt: U0 20-66 V
Ampere: I1 35-52 A
3
Metal working and machine toolsWelding machinesOther
Länge: . mmHöhe: . mmVolt: U1 220-500- 50 HZ VAmpere: I1 29-94 A
Länge: . mm
Höhe: . mm
Volt: U1 220-500- 50 HZ V
Ampere: I1 29-94 A
3
Metal working and machine toolsWelding machinesOther
Länge: . mmHöhe: . mmVolt: U0 20 VAmpere: I1 20-16 A
Länge: . mm
Höhe: . mm
Volt: U0 20 V
Ampere: I1 20-16 A
4
Metal working and machine toolsWelding machinesOther
Länge: . mmHöhe: . mmVolt: U2 20-36 VAmpere: i2 250-400
Länge: . mm
Höhe: . mm
Volt: U2 20-36 V
Ampere: i2 250-400
6
Metal working and machine toolsWelding machinesOther
Länge: . mmHöhe: . mmVolt: U1 400 - 50 HZ VAmpere: 32
Länge: . mm
Höhe: . mm
Volt: U1 400 - 50 HZ V
Ampere: 32
3
Metal working and machine toolsWelding machinesOther
Länge: . mmHöhe: . mmVolt: U0 20-66 VAmpere: I1 35-52 A
Länge: . mm
Höhe: . mm
Volt: U0 20-66 V
Ampere: I1 35-52 A
10
Metal working and machine toolsMilling machinesPlaner-type milling M/C - double column
x-Weg: . mmy-Weg: . mmz-Weg: . mmDrehzahl: U/minSpindelaufnahme ISO: 50Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: . mm
y-Weg: . mm
z-Weg: . mm
Drehzahl: U/min
Spindelaufnahme ISO: 50
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesCNC lathes
Drehdurchmesser: . mmDrehlänge: . mmSteuerung: SiemensTyp: 840DSpindeldurchlass: mmWerkzeugwechsler: Pos.Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser: . mm
Drehlänge: . mm
Steuerung: Siemens
Typ: 840D
Spindeldurchlass: mm
Werkzeugwechsler: Pos.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
6
Hubert Cloix PC120FA Pastocooker, Serial: 1464, 2012, Stainless, 120L Pastocooker, with agitation and scrape surface, refrigerated water cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph
Hubert Cloix PC120FA Pastocooker, Serial: 1464, 2012, Stainless, 120L Pastocooker, with agitation and scrape surface, refrigerated water cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph
7
Hubert Cloix PC60FA Pastocooker, Serial: 1053, 2012, Stainless, 60L Pastocooker, with agitation and scrape surface, refrigerated air cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph
Hubert Cloix PC60FA Pastocooker, Serial: 1053, 2012, Stainless, 60L Pastocooker, with agitation and scrape surface, refrigerated air cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph
7
Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph
Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph
5
Kaeser SX3T Compressor, Serial: 2268, 2010, 2.2Kw, 11.0Bar, 3Ph
Kaeser SX3T Compressor, Serial: 2268, 2010, 2.2Kw, 11.0Bar, 3Ph
5
Kaeser SX3T Compressor, Serial: 2266, 2010, 2.2Kw, 11.0Bar, 3Ph
Kaeser SX3T Compressor, Serial: 2266, 2010, 2.2Kw, 11.0Bar, 3Ph
8
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 2050 mm Sheet thickness (420 N/mm²): 3 mm Max. thickness - stainless steel: 2 mm Max. thickness - aluminium: 4 mm Antrieb: Motorized Back gauge: 1000 mm Length: 3350 mm Width: 2200 mm Height: 1900 mm Weight: 3800 kg
Bending length: 2050 mm
Sheet thickness (420 N/mm²): 3 mm
Max. thickness - stainless steel: 2 mm
Max. thickness - aluminium: 4 mm
Antrieb: Motorized
Back gauge: 1000 mm
Length: 3350 mm
Width: 2200 mm
Height: 1900 mm
Weight: 3800 kg
8
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 2550 mm Sheet thickness (420 N/mm²): 2.5 mm Max. thickness - stainless steel: 1.5 mm Max. thickness - aluminium: 3.5 mm Antrieb: Motorized Back gauge: 1000 mm Length: 3830 mm Width: 2200 mm Height: 1900 mm Weight: 4050 kg
Bending length: 2550 mm
Sheet thickness (420 N/mm²): 2.5 mm
Max. thickness - stainless steel: 1.5 mm
Max. thickness - aluminium: 3.5 mm
Antrieb: Motorized
Back gauge: 1000 mm
Length: 3830 mm
Width: 2200 mm
Height: 1900 mm
Weight: 4050 kg

Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.

Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !

Sign up now for free