Moody Centrifugal pump, serial: MPP01006 2001, stainless centrifugal pump, 2.2Kw, 3Ph

Moody Centrifugal pump, serial: MPP01007 2001, stainless centrifugal pump, 2.2Kw, 3Ph

Frampton conveyor grill, Stainless, two tier conveyor oven, belt dimensions 2800mm x 450mm, variable speed, digital temp controls, 20Kw, mobile, 3Ph

Spindle diameter: 120mm
x-travel: 1200 mm
y-travel: 600 mm
z-travel: 600 mm
Speed: 19-1900 rpm
Table size: 600x1200 mm
Table load: 2000 kg
Spindle mount ISO: 50
Feed: 0.042-1.46 mm/rev
Machine weight approx.: . t
Space requirement approx.: . m

Drehdurchmesser über Bett: 1450 mm
Drehdurchmesser über Support: 1070 mm
Drehlänge: 7000 mm
Drehzahl: 2,24-450 U/min
Steuerung: Siemens
Planscheibe: 1400 mm
Spindeldurchlass: 160 mm
Lünette: 400 mm
Antriebsleistung - Werkstück: 63 kW
Reitstock:: elektr.
Pinolendurchmesser: 200 mm
Bettbreite: 950 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Bar length: 3000
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m

Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242

Accessory: Documentation

Posiweigh Triple200 Three lane linear weighing line, Serial: 3054, 2015, never been in production, weighing capacity up to 1000grams, suitable for dry, free flowing granular or piece type products, hopper capacity 120l, weighpan capacity 5l, two different discharge chutes for single drop of treble drop, comes with vibratory conveyor with 500kg hopper then feeds onto flighted elevator conveyor that feeds into the linear weigher and finally discharges onto a 3m indexing conveyor, supplied with a set of stainless steps, 1Ph

Easyroast ERL02 mini roasting oven, Serial: 932, 2014, 9.5Kw, capacity up to 20Kgs per hour, ideal for sunflower seeds, peanuts, chickpeas, cashews, almonds, hazelnuts and pistachio, comes with 25l salting unit

Easyroast ERL02 mini roasting oven, Serial: 933, 2014, 9.5Kw, capacity up to 20Kgs per hour, ideal for sunflower seeds, peanuts, chickpeas, cashews, almonds, hazelnuts and pistachio, comes with 25l salting unit

Fuyi DL999 Quantitive filling machine, Stainless auto weighing and filling machine, 10g - 999g, filling speed up to 15pcs per min, filling error +or- 2g, mobile, 1Ph

2008, Lsealer, sealing bars 560mm x 450mm, digital controls, mobile, 1Ph

Pentavac Penta2100 VFFS bagger, 2007, vertical form fill and seal machine, 300mm jaw width, adjustable temperature controls, with printer, touch screen controls, with outfeed conveyor, belt width 280mm, belt height 950mm, with four different forming sets, with manual and box of spares, 3Ph

Auriol M500VBEX cooking kettle, 3429 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Auriol M500VBEX cooking kettle, 3430 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Auriol cooking kettle, Stainless, 400l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Syspal 600HA2 Eurobin wash frame, 2021, stainless, SWL 50Kgs, 3Ph

Cryovac STE96-600 hot water shrink tunnel, Serial: SN00422, 2014, Stainless hot water shrink tunnel, steam, belt dimensions 1300mm x 600mm, max product height 220mm, HMI touch screen control, 3Ph

SMIpack SL55 Lsealer Serial: 52137 2015, sealing bar 560mm x 430mm, max pack height 260mm, up to 300 products per hour, mobile, 3Ph

Groen Tdb/7-20 heated tilting kettle Stainless, heated mixing kettle, two 20l removable bowls, scrape surface, tilt to discharge, 3Ph

Clarke Air compressor Serial: 135969 2018, Air compressor, 200L, 5.5Hp, 3Ph

Clarke Air compressor Serial: 136106 2018, Air compressor, 270L, 7.5Kw, 3Ph

2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)

Stainless, 50Kg hopper, belt dimensions 2200mm x 110mm, height of flights 30mm, missing motor and legs

Hobart 20l Planetary mixer, tabletop, with whisk attachment, variable speed, 1Ph

width of rolls: 400 mm
diameter of rolls: 60 mm
number of rolls: 29
Length: 3000 mm

Punching power: 55 ton
Throat depth: 500 mm
Max. diameter at sheet thickness (mild steel): 40 x 10 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1550 mm
Width: 1200 mm
Height: 1950 mm
Weight: 1150 kg

Schnittdurchmesser: 540 mm
Sägebandlänge: 6700 mm
Schnittbreite: 610 mm
Hub: 1000 mm
Steuerung: NC
Bandgeschwindigkeit: 20-116 m/min
Säulendurchmesser: 150 mm
Gesamtleistungsbedarf: 11 kW
Maschinengewicht ca.: 3,6 t
Raumbedarf ca.: m

Faceplate diameter: 1200 mm
Swing diameter: 1500 mm
Turning height: 1300 mm
Support adjustment: 800 mm
Side support - horizontal adjustment: 550 mm
Digital display: Heidenhain
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Turning diameter: 820 mm
Turning length: 300mm
Turning diameter over support: 465 mm
Spindle torque: 3000 Nm
Speed: 5.6-1120 rpm
Feed: 1-5000mm/min
Rapid traverse: 5000 mm/min
Tailstock quill mount MK: 6
Three-jaw chuck Forckrath: mm
Bezel: mm
Main drive motor: 50 kW
Main spindle diameter: 170 mm
Spindle passage: 128 mm
Tailstock quill diameter: 125 mm
Tailstock quill stroke: 250 mm
z-axis: 3000 mm
x-axis: 550 mm
Total power requirement: 52 kW
Machine weight approx.: 7.1 t
Space requirement approx.: m

Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar

Measurements and weight
Machine weight: 13500 kg

Robot
Producer: Wittman
Type: W743
Year: 2009

Pokomat P16/320 Injector, Stainless, 16 needle injector, capacity 800Kgs/h, with two sets of needles, belt dimensions 1300mm x 300mm, 3Ph

Bizerba S121 Meat tenderizer Serial: 11437855 2017, can be used as a strip cutter or tenderizing of meat. Ideal for turning fresh meat and cold cuts as well as fruit and veg into fine salads, tabletop, 1Ph

Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph

Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good

High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.

2007, Stainless mixer aerator, 500L, mobile frame, see link for all spec http://www.shufflemix.com/en/aerators/shufflemixer-250-1000/

2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Shuffle-mix 250 mixer / aerator, Serial: 200-103 Stainless mixer, 250L, mobile frame, see http://www.shufflemix.com/en/aerators/shufflemixer-250-1000/ for all spec

Bending length: 3200 mm
Sheet thickness (420 N/mm²): 1 mm
Max. thickness - stainless steel: 0.6 mm
Max. thickness - aluminium: 15 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 4500 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2900 kg

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2500 kg

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 1000 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2350 mm
Height: 1650 mm
Weight: 2500 kg

pressing capacity: 600 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 3100 mm
Gap in side frame: 410 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 280 l
Motor power: 2 x 11 kW
Length: 5750 mm
Width: 2500 mm
Height: 4000 mm
Weight: 40500 kg

x-travel: 3500 mm
y-travel: 1600 mm
z-travel: 900 mm
Speed: 20-2000 rpm
Spindle mount ISO: SK50
Table dimension: 5000x1000 mm
Control: Heidenhain TNC 426
Spindle drive motor: 22 kW
Rapid traverse: 5000 mm/min
Machine weight approx.: 16 t

Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP

Year: 2003

x-Weg: 6300 mm
y-Weg: 2200 mm
Werkstückhöhe: 1835 mm
Tischfläche: 6000x1835 mm
Support: 2
Seitensupport: 2
Anzahl der T-Nuten: 7
T-Nuten - Abstand: 240 mm
T-Nuten - Breite: 28 mm
Bettlänge: 14650 mm
Ständerdurchgang: 2075 mm
Vorschub: 5-60 m/min
Werkstückgewicht: 15000 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 55 t
Raumbedarf ca.: 14,65x4,37x4,05 m

Rundtisch-Durchmesser: . mm
Schleifscheiben-Durchmesser max.: . mm
mit Handlauf: . 0
Handauflage: . 0

Druck: 630 KN
Ständerweite: 800 mm
Hub: 150 mm
Tischfläche: 720x550 mm
Stößelfläche: 720x520 mm
Einbauhöhe: 420 mm
Eilsenkgeschwindigkeit: 394 mm/sec
Arbeitsgeschwindigkeit: 71/17 mm/sec
Rücklaufgeschwindigkeit: 390 mm/sec
Verstellwege der Hublage: 120 mm
Gesamtleistungsbedarf: 15 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Temperatur max.: 300 Grad
Größe der Öffnung: . mm
Tiefe der Kammer: 750 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 1200x750x1620 m

Revs: 40 -3200 r.p.m.
Taper: ISO 40
Working area: 600 x 500 x 400 mm
Table: 1000 x 500 mm
Motor: 3.75 kW
Rapid feed in all 3 axes: 1000 mm/min
Clamping slots: 8
Width x Distance: 14 x 63 mm
Maximal table load: 300 kg
Travel longitudinal: 600 mm
Travel cross: 500 mm
Travel vertical: 400 mm
Feeds stepless X,Y range: 0 - 600 mm/min.
Feeds stepless Z range: 0 - 600 mm/min.
Horizontal spindle number of rates: 40 - 3200
Vertical spindle number of rates: 40 - 3200
Spindle swivelling: +/- 90° °
Quill travel: 100 mm
Clamping of tools: manuell
Spindle motor: 3 kW
vertical table: 1200 x 250 mm
Distance vertical milling spindle - milling table: 160 - 660 mm
Distance horizontal milling spindle - milling table: 95 - 495 (2. T-Nut), 180 - 580 (3. T-Nut) mm
Weight: 1814 kg

Revs: 65 - 2600 r.p.m.
Taper: ISO 40
Working area: 420 x 220 x 380 mm
Table: 840 x 390 mm
Motor: 2.2 kW
Working table clamping surface: 840 x 390 mm
Rapid feed in all 3 axes: 1000 mm/min
Clamping slots: 5
Width x Distance: 14 x 63 mm
Maximal table load: 200 kg
Travel longitudinal: 420 mm
Travel cross: 220 mm
Travel vertical: 380 mm
Feeds stepless X,Y range: 0 - 600 mm/min.
Feeds stepless Z range: 0 - 600 mm/min.
Horizontal spindle number of rates: 65 - 2600
Distance of spindle axis from frame guide ways: 90 - 310 mm
Vertical spindle number of rates: 65 - 2600
Spindle swivelling: +/- 90° °
Quill travel: 100 mm
Clamping of tools: manuell
Spindle motor: 2 kW
vertical table: 950 x 250 mm
Distance vertical milling spindle - milling table: 90 - 310 mm
Distance horizontal milling spindle - milling table: 100 - 480 mm
Length: 1600 mm
Width: 1700 mm
Height: 2000 mm
Weight: 1145 kg

pressing capacity: 100 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X Achse
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Table height: 900 mm
Table width: 104 mm
Motor power: 11 kW
Length: 4200 mm
Width: 1670 mm
Height: 2850 mm
Weight: 8500 kg