2
Metal working and machine toolsLathes
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 4100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg
Cutting length: 4100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 4100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg
Cutting length: 4100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg
3
Metal working and machine toolsSheet metal working machinesBeading machines
Max. thickness - mild steel: 4 mm
Throat depth: 200 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Motor: 2.2 kW
Revs: 16 1/min
Length: 1700 mm
Width: 570 mm
Height: 1200 mm
Weight: 500 kg
Max. thickness - mild steel: 4 mm
Throat depth: 200 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Motor: 2.2 kW
Revs: 16 1/min
Length: 1700 mm
Width: 570 mm
Height: 1200 mm
Weight: 500 kg
Throat depth: 200 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Motor: 2.2 kW
Revs: 16 1/min
Length: 1700 mm
Width: 570 mm
Height: 1200 mm
Weight: 500 kg
5
Metal working and machine toolsSheet metal working machinesPlasma cutting machines
Working area: 1000x2000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
Working area: 1000x2000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
4
Metal working and machine toolsSheet metal working machinesPlasma cutting machines
Working area: 2000x6000 mm
Plasma source: Hypertherm XPR 170 CORE
Max. thickness - mild steel: 60 mm
Max. thickness - stainless steel: 38 mm
Max. thickness - aluminium: 38 mm
Max. piercing thickness - mild steel: 35 mm
Max. piercing thickness - stainless steel: 22 mm
Max. piercing thickness - aluminium: 25 mm
Current: 170 A
Max. cutting speed: 12 m/min
Positioning speed: 35 m/min
Weight: 6000 kg
Working area: 2000x6000 mm
Plasma source: Hypertherm XPR 170 CORE
Max. thickness - mild steel: 60 mm
Max. thickness - stainless steel: 38 mm
Max. thickness - aluminium: 38 mm
Max. piercing thickness - mild steel: 35 mm
Max. piercing thickness - stainless steel: 22 mm
Max. piercing thickness - aluminium: 25 mm
Current: 170 A
Max. cutting speed: 12 m/min
Positioning speed: 35 m/min
Weight: 6000 kg
Plasma source: Hypertherm XPR 170 CORE
Max. thickness - mild steel: 60 mm
Max. thickness - stainless steel: 38 mm
Max. thickness - aluminium: 38 mm
Max. piercing thickness - mild steel: 35 mm
Max. piercing thickness - stainless steel: 22 mm
Max. piercing thickness - aluminium: 25 mm
Current: 170 A
Max. cutting speed: 12 m/min
Positioning speed: 35 m/min
Weight: 6000 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 300 mm
Ram: 950x650 mm
Table: 1200x750 mm
Daylight: 550 mm
Rapid speed: 100 mm/s
Working speed: 5 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Length: 2225 mm
Width: 1600 mm
Height: 3650 mm
Weight: 8200 kg
pressing capacity: 150 to
Stroke: 300 mm
Ram: 950x650 mm
Table: 1200x750 mm
Daylight: 550 mm
Rapid speed: 100 mm/s
Working speed: 5 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Length: 2225 mm
Width: 1600 mm
Height: 3650 mm
Weight: 8200 kg
Stroke: 300 mm
Ram: 950x650 mm
Table: 1200x750 mm
Daylight: 550 mm
Rapid speed: 100 mm/s
Working speed: 5 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Length: 2225 mm
Width: 1600 mm
Height: 3650 mm
Weight: 8200 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 30 to
Stroke: 200 mm
Ram: 500x380 mm
Table: 700x450 mm
Daylight: 400 mm
Rapid speed: 54 mm/s
Working speed: 18 mm/s
Retraction speed: 90 mm/s
Motor: 7.5 kW
Length: 1680 mm
Width: 850 mm
Height: 250 mm
Weight: 2950 kg
pressing capacity: 30 to
Stroke: 200 mm
Ram: 500x380 mm
Table: 700x450 mm
Daylight: 400 mm
Rapid speed: 54 mm/s
Working speed: 18 mm/s
Retraction speed: 90 mm/s
Motor: 7.5 kW
Length: 1680 mm
Width: 850 mm
Height: 250 mm
Weight: 2950 kg
Stroke: 200 mm
Ram: 500x380 mm
Table: 700x450 mm
Daylight: 400 mm
Rapid speed: 54 mm/s
Working speed: 18 mm/s
Retraction speed: 90 mm/s
Motor: 7.5 kW
Length: 1680 mm
Width: 850 mm
Height: 250 mm
Weight: 2950 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 170 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
pressing capacity: 170 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 125 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm
pressing capacity: 125 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 500 mm
Table: 800x600 mm
Daylight: 630 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 1800 mm
Width: 1200 mm
Height: 2400 mm
Weight: 4500 kg
pressing capacity: 150 to
Stroke: 500 mm
Table: 800x600 mm
Daylight: 630 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 1800 mm
Width: 1200 mm
Height: 2400 mm
Weight: 4500 kg
Stroke: 500 mm
Table: 800x600 mm
Daylight: 630 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 1800 mm
Width: 1200 mm
Height: 2400 mm
Weight: 4500 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 40 to
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg
pressing capacity: 40 to
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 300 to
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
pressing capacity: 300 to
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
pressing capacity: 200 to
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg
pressing capacity: 150 to
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg
9
Printing machineryPrinting machines
Format: 52 x 72 cm,
Alcohol dampening, Ink and register remote control, Autoplate, Grafix powderspray, Absolute new condition
Extras: | Autoplate | Ink Remote Control | Touch-screen Control
Format: 52 x 72 cm,
Alcohol dampening, Ink and register remote control, Autoplate, Grafix powderspray, Absolute new condition
Extras: | Autoplate | Ink Remote Control | Touch-screen Control
Alcohol dampening, Ink and register remote control, Autoplate, Grafix powderspray, Absolute new condition
Extras: | Autoplate | Ink Remote Control | Touch-screen Control
6
Metal working and machine toolsSanding machines
Distance spindle - table: 610 mm
Table: 600 x 300 mm
Grinding area: 610 x 305 x 610 mm
Grinding lenght: 610 mm
Magnetic table: 300 x 600 mm
Table movement hydraulic: 650 mm
Table movement manual: 700 mm
Table speed: 5 - 25 m/min
Cross feed: 0 - 2,250 m/min
Cross feed incremental: 3 - 32 mm
Max. cross feed: 320 mm
Spindle motor: 3.7 kW
Hydraulic motor: 0.74 kW
Cross feed motor: 1 kW
Feed motor grinding wheel: 1 kW
Total power: 5 kW
Grinding wheel dimensions: 355 x 50 x 127 mm
Spindle speed: 1.45 U/min
Length: 2950 mm
Width: 1490 mm
Height: 2080 mm
Weight: 2200 kg
Distance spindle - table: 610 mm
Table: 600 x 300 mm
Grinding area: 610 x 305 x 610 mm
Grinding lenght: 610 mm
Magnetic table: 300 x 600 mm
Table movement hydraulic: 650 mm
Table movement manual: 700 mm
Table speed: 5 - 25 m/min
Cross feed: 0 - 2,250 m/min
Cross feed incremental: 3 - 32 mm
Max. cross feed: 320 mm
Spindle motor: 3.7 kW
Hydraulic motor: 0.74 kW
Cross feed motor: 1 kW
Feed motor grinding wheel: 1 kW
Total power: 5 kW
Grinding wheel dimensions: 355 x 50 x 127 mm
Spindle speed: 1.45 U/min
Length: 2950 mm
Width: 1490 mm
Height: 2080 mm
Weight: 2200 kg
Table: 600 x 300 mm
Grinding area: 610 x 305 x 610 mm
Grinding lenght: 610 mm
Magnetic table: 300 x 600 mm
Table movement hydraulic: 650 mm
Table movement manual: 700 mm
Table speed: 5 - 25 m/min
Cross feed: 0 - 2,250 m/min
Cross feed incremental: 3 - 32 mm
Max. cross feed: 320 mm
Spindle motor: 3.7 kW
Hydraulic motor: 0.74 kW
Cross feed motor: 1 kW
Feed motor grinding wheel: 1 kW
Total power: 5 kW
Grinding wheel dimensions: 355 x 50 x 127 mm
Spindle speed: 1.45 U/min
Length: 2950 mm
Width: 1490 mm
Height: 2080 mm
Weight: 2200 kg
2
Printing machineryPost press machinesDie cutter
Polar Autocut AC25-XT Diecutter
For inline production of die-cut labels, buffering strips, label cutting, die-cutting, banding,
The system containes:
Polar Autocut AC25-XT, Polar Diecutter DC-11, Polar Bundler BD Bander,
More specs on request
Polar Autocut AC25-XT Diecutter
For inline production of die-cut labels, buffering strips, label cutting, die-cutting, banding,
The system containes:
Polar Autocut AC25-XT, Polar Diecutter DC-11, Polar Bundler BD Bander,
More specs on request
For inline production of die-cut labels, buffering strips, label cutting, die-cutting, banding,
The system containes:
Polar Autocut AC25-XT, Polar Diecutter DC-11, Polar Bundler BD Bander,
More specs on request
8
Printing machineryFlexographic and gravure printing
Format 430 mm, Auto tension winder, Servo driven infeed, Servo driven outfeed, Operator interface with color touchscreen, Omet automatic register control, Motorised Video camera, Single drive Coraona treatment, Rotary die cutting / embossing system, 3 x Shaftless and gearsless Flexo printing unitswith sleeve system plate change over, 5 x offset printing units with sleeve technology, 1 x coldfoil unit, 8 x single lamp UV E2C system, Omet Arcs Register control,
Format 430 mm, Auto tension winder, Servo driven infeed, Servo driven outfeed, Operator interface with color touchscreen, Omet automatic register control, Motorised Video camera, Single drive Coraona treatment, Rotary die cutting / embossing system, 3 x Shaftless and gearsless Flexo printing unitswith sleeve system plate change over, 5 x offset printing units with sleeve technology, 1 x coldfoil unit, 8 x single lamp UV E2C system, Omet Arcs Register control,
3
Printing machineryPrinting machines
Heidelberg SM 52-5 LX Anicolor UV
Format: 36 x 52 cm, Anicolor, Prinect press center, Alcolor dampening, Technotrans cooling and recirculation device, Inking unit temp control, Watercooled machine, Autoplate, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x IST UV interdeck dryer, 1 x IST UV end dryer, Powderspray, Extended delivery.
Machine nr: GS000747, Impressions: 60 million
Heidelberg SM 52-5 LX Anicolor UV
Format: 36 x 52 cm, Anicolor, Prinect press center, Alcolor dampening, Technotrans cooling and recirculation device, Inking unit temp control, Watercooled machine, Autoplate, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x IST UV interdeck dryer, 1 x IST UV end dryer, Powderspray, Extended delivery.
Machine nr: GS000747, Impressions: 60 million
Format: 36 x 52 cm, Anicolor, Prinect press center, Alcolor dampening, Technotrans cooling and recirculation device, Inking unit temp control, Watercooled machine, Autoplate, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x IST UV interdeck dryer, 1 x IST UV end dryer, Powderspray, Extended delivery.
Machine nr: GS000747, Impressions: 60 million
10
Printing machineryPrinting machines
Heidelberg CX 102-4 sheetfed press
Format: 72 x 102 cm, CP 2000, Wallscreen, Impress control, Presscenter instant gate, Presscenter net profiler, Alcolor dampening, Preset Plus Feeder, Preset Plus delivery, Technotrans Combistar Beta 140 L air cooled, Heidelberg washstar for blanket and impression cylinder and rollers, Powderspray, Software version S15B.27.00
Machine nr: 550780, Impressions: 240 million
Heidelberg CX 102-4 sheetfed press
Format: 72 x 102 cm, CP 2000, Wallscreen, Impress control, Presscenter instant gate, Presscenter net profiler, Alcolor dampening, Preset Plus Feeder, Preset Plus delivery, Technotrans Combistar Beta 140 L air cooled, Heidelberg washstar for blanket and impression cylinder and rollers, Powderspray, Software version S15B.27.00
Machine nr: 550780, Impressions: 240 million
Format: 72 x 102 cm, CP 2000, Wallscreen, Impress control, Presscenter instant gate, Presscenter net profiler, Alcolor dampening, Preset Plus Feeder, Preset Plus delivery, Technotrans Combistar Beta 140 L air cooled, Heidelberg washstar for blanket and impression cylinder and rollers, Powderspray, Software version S15B.27.00
Machine nr: 550780, Impressions: 240 million
14
Metal working and machine toolsLathesCNC lathes
Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg
1
Metal working and machine toolsSheet metal working machinesNibbling machines
Punching power: 30 ton
Working area: 3000x1500 mm
X-axis movement (+repositioning): 3000 mm
Y-axis movement: 1500 mm
speed of X-axis: 70 m/Min
speed of Y-axis: 60 m/min
speed combined X+Y: 120 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 325 1/min
Max. strokes at marking: 2800 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 28
Positioning accuracy: 0.1 mm
Repeat accuracy: 0.05 mm
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 200 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Oiltank: 180 l
Height: 2310 mm
Width without light barrier: 6300 mm
Width with light barrier: 8300 mm
Length without light barrier: 6650 mm
Length with light barrier: 7650 mm
Weight: 18250 kg
Punching power: 30 ton
Working area: 3000x1500 mm
X-axis movement (+repositioning): 3000 mm
Y-axis movement: 1500 mm
speed of X-axis: 70 m/Min
speed of Y-axis: 60 m/min
speed combined X+Y: 120 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 325 1/min
Max. strokes at marking: 2800 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 28
Positioning accuracy: 0.1 mm
Repeat accuracy: 0.05 mm
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 200 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Oiltank: 180 l
Height: 2310 mm
Width without light barrier: 6300 mm
Width with light barrier: 8300 mm
Length without light barrier: 6650 mm
Length with light barrier: 7650 mm
Weight: 18250 kg
Working area: 3000x1500 mm
X-axis movement (+repositioning): 3000 mm
Y-axis movement: 1500 mm
speed of X-axis: 70 m/Min
speed of Y-axis: 60 m/min
speed combined X+Y: 120 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 325 1/min
Max. strokes at marking: 2800 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 28
Positioning accuracy: 0.1 mm
Repeat accuracy: 0.05 mm
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 200 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Oiltank: 180 l
Height: 2310 mm
Width without light barrier: 6300 mm
Width with light barrier: 8300 mm
Length without light barrier: 6650 mm
Length with light barrier: 7650 mm
Weight: 18250 kg
_1_thumb.jpeg "Show advert")
_2_thumb.jpeg "Show advert")
_3_thumb.jpeg "Show advert")
_4_thumb.jpeg "Show advert")
_5_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
8
Printing machineryCutting machines
Josting EFS 2800 big size cutter
Cutting width 2800 cm
Year: 2006 –
Chrome back table with air.
–Knife chage tools
Josting EFS 2800 big size cutter
Cutting width 2800 cm
Year: 2006 –
Chrome back table with air.
–Knife chage tools
Cutting width 2800 cm
Year: 2006 –
Chrome back table with air.
–Knife chage tools
5
Food machinesAccessories and spare parts
Anritsu SV Checkweigher, Serial: 4600060685, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph
Anritsu SV Checkweigher, Serial: 4600060685, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph
6
Food machinesBakery-, pastry equipmentCutting machines
Doyon FC2E Pizza oven, Serial: 7096, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
Doyon FC2E Pizza oven, Serial: 7096, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
6
Food machinesBakery-, pastry equipmentCutting machines
Doyon FC2E Pizza oven, Serial: 7097, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
Doyon FC2E Pizza oven, Serial: 7097, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
6
Food machinesBakery-, pastry equipmentCutting machines
Doyon FC2E Pizza oven, Serial: 7092, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
Doyon FC2E Pizza oven, Serial: 7092, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
11
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Opening of upper beam: 180 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 7200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 2000 kg
Bending length: 6010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Opening of upper beam: 180 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 7200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 2000 kg
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Opening of upper beam: 180 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 7200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 2000 kg
2
Metal working and machine toolsSanding machines
Distance spindle - table: 600 mm
Table: 600 x 300 mm
Grinding lenght: 610 mm
Magnetic table: 600 x 300 mm
Table speed: 0 - 20 m/min
Cross feed: 0 - 3000 m/min
Max. cross feed: 350 mm
Automatic vertical feed: 440 mm
Vertical feed: 0 - 3000 mm/min
Vertical feed incremental: 0.001 mm
Spindle revs: 500 - 1800 rpm
Spindle motor: 11 kW
Table height: 975 mm
Max. workpiece weight on magnetic table: 195 kg
Max. workpiece weight on t-slot table: 370 kg
Grinding wheel dimensions: 355 x 50 x 127 mm
Servo-axis motors Y/Z: 1,1 / 1,1
Servo-axis motor X: 3.9 kW
Length: 3160 mm
Width: 2450 mm
Height: 2080 mm
Transport dimensions: 3400 x 2200 x 2530 mm
Weight: 4000 kg
Distance spindle - table: 600 mm
Table: 600 x 300 mm
Grinding lenght: 610 mm
Magnetic table: 600 x 300 mm
Table speed: 0 - 20 m/min
Cross feed: 0 - 3000 m/min
Max. cross feed: 350 mm
Automatic vertical feed: 440 mm
Vertical feed: 0 - 3000 mm/min
Vertical feed incremental: 0.001 mm
Spindle revs: 500 - 1800 rpm
Spindle motor: 11 kW
Table height: 975 mm
Max. workpiece weight on magnetic table: 195 kg
Max. workpiece weight on t-slot table: 370 kg
Grinding wheel dimensions: 355 x 50 x 127 mm
Servo-axis motors Y/Z: 1,1 / 1,1
Servo-axis motor X: 3.9 kW
Length: 3160 mm
Width: 2450 mm
Height: 2080 mm
Transport dimensions: 3400 x 2200 x 2530 mm
Weight: 4000 kg
Table: 600 x 300 mm
Grinding lenght: 610 mm
Magnetic table: 600 x 300 mm
Table speed: 0 - 20 m/min
Cross feed: 0 - 3000 m/min
Max. cross feed: 350 mm
Automatic vertical feed: 440 mm
Vertical feed: 0 - 3000 mm/min
Vertical feed incremental: 0.001 mm
Spindle revs: 500 - 1800 rpm
Spindle motor: 11 kW
Table height: 975 mm
Max. workpiece weight on magnetic table: 195 kg
Max. workpiece weight on t-slot table: 370 kg
Grinding wheel dimensions: 355 x 50 x 127 mm
Servo-axis motors Y/Z: 1,1 / 1,1
Servo-axis motor X: 3.9 kW
Length: 3160 mm
Width: 2450 mm
Height: 2080 mm
Transport dimensions: 3400 x 2200 x 2530 mm
Weight: 4000 kg
1
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg
6
Metal working and machine toolsMachining centersVertical machining centers
KIRA (Japan) KN 30 VS 2-Fach Palettenbearbeitungszentrum / Vertikal-Baujahr 1992 ( Maschine aus Erstbesitz sehr gepflegt)-2-Fach Palettenwechsel / Rundpalettenwechsel-Fanuc OM - Mate-Palettengröße 300x300mmBojvthe00tv-Verfahrwege X400 Y300 Z280mm-Werkzeugwechsel 12 fach-Spindeldrehzahlen 200 - 4500U/min-Antriebsleistung 7,5 KW-Späneförder / Spüleinrichtung / ArbeitsraumbeleuchtungAbmaße:LxBxH 2,4x1,7x2,3 Meter / Gewicht 3500Kg
KIRA (Japan) KN 30 VS 2-Fach Palettenbearbeitungszentrum / Vertikal
-Baujahr 1992 ( Maschine aus Erstbesitz sehr gepflegt)
-2-Fach Palettenwechsel / Rundpalettenwechsel
-Fanuc OM - Mate
-Palettengröße 300x300mm
Bojvthe00tv
-Verfahrwege X400 Y300 Z280mm
-Werkzeugwechsel 12 fach
-Spindeldrehzahlen 200 - 4500U/min
-Antriebsleistung 7,5 KW
-Späneförder / Spüleinrichtung / Arbeitsraumbeleuchtung
Abmaße:
LxBxH 2,4x1,7x2,3 Meter / Gewicht 3500Kg
-Baujahr 1992 ( Maschine aus Erstbesitz sehr gepflegt)
-2-Fach Palettenwechsel / Rundpalettenwechsel
-Fanuc OM - Mate
-Palettengröße 300x300mm
Bojvthe00tv
-Verfahrwege X400 Y300 Z280mm
-Werkzeugwechsel 12 fach
-Spindeldrehzahlen 200 - 4500U/min
-Antriebsleistung 7,5 KW
-Späneförder / Spüleinrichtung / Arbeitsraumbeleuchtung
Abmaße:
LxBxH 2,4x1,7x2,3 Meter / Gewicht 3500Kg
3
Metal working and machine toolsDrilling machines and boring millsRadial drilling machines
DONAU DR 40z Schnellradialbohrmaschine<br /><br />Technische Daten:<br />- Bohrleistung ins volle Stahl ST 60: 40 mm<br />- Bohrleistung GG 25: 50 mm<br />- Gewindeschneiden ST60: M 33<br />- Gewindeschneiden GG 25: M 45<br />- Bohrspindelaufnahme: MK<br />- Spindeldurchmesser: 55 mm<br />- Pinolenhub: 200 mm<br />- 18 Bohrspindeldrehzahlen 35-1800 U/min<br />- Bohrvorschübe 0,075 - 0,60 mm/U<br />- Höhenverstellung der Bohrsäule: 450 mm<br />- Bohrradius min/max: 305 / 1005 mm<br />- Tischgröße: 1200 x 600 mm<br />- Antrieb 400 V / 6 kW<br />- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm<br />- Gewicht: ca.1800 kg
DONAU DR 40z Schnellradialbohrmaschine<br /><br />Technische Daten:<br />- Bohrleistung ins volle Stahl ST 60: 40 mm<br />- Bohrleistung GG 25: 50 mm<br />- Gewindeschneiden ST60: M 33<br />- Gewindeschneiden GG 25: M 45<br />- Bohrspindelaufnahme: MK<br />- Spindeldurchmesser: 55 mm<br />- Pinolenhub: 200 mm<br />- 18 Bohrspindeldrehzahlen 35-1800 U/min<br />- Bohrvorschübe 0,075 - 0,60 mm/U<br />- Höhenverstellung der Bohrsäule: 450 mm<br />- Bohrradius min/max: 305 / 1005 mm<br />- Tischgröße: 1200 x 600 mm<br />- Antrieb 400 V / 6 kW<br />- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm<br />- Gewicht: ca.1800 kg
1
Metal working and machine toolsMilling machinesTool milling machines
DECKEL FP2 Werkzeugfräsmaschinex-Weg: 400 mmy-Weg: 200 mmz-Weg: 400 mmTischaufspannfläche 800x 285 mmSpindelaufnahme ISO 40Spindeldrehzahlen 40 - 2000 U/minPinolenhub 70mmB7XiqgjjziGesamtleistungsbedrf 2,2 kWMaschinengewicht ca. 1,1tRaumbedarf ca. 1,3 x 1,2 1,8 mWerkzeugfräsmaschine mit:3-Achsen Digitalanzeige- Universalfräskopf- Stahlabdeckung für Z-Achse- externer Schaltschrank
DECKEL FP2 Werkzeugfräsmaschine
x-Weg: 400 mm
y-Weg: 200 mm
z-Weg: 400 mm
Tischaufspannfläche 800x 285 mm
Spindelaufnahme ISO 40
Spindeldrehzahlen 40 - 2000 U/min
Pinolenhub 70mm
B7Xiqgjjzi
Gesamtleistungsbedrf 2,2 kW
Maschinengewicht ca. 1,1t
Raumbedarf ca. 1,3 x 1,2 1,8 m
Werkzeugfräsmaschine mit:
3-Achsen Digitalanzeige
- Universalfräskopf
- Stahlabdeckung für Z-Achse
- externer Schaltschrank
x-Weg: 400 mm
y-Weg: 200 mm
z-Weg: 400 mm
Tischaufspannfläche 800x 285 mm
Spindelaufnahme ISO 40
Spindeldrehzahlen 40 - 2000 U/min
Pinolenhub 70mm
B7Xiqgjjzi
Gesamtleistungsbedrf 2,2 kW
Maschinengewicht ca. 1,1t
Raumbedarf ca. 1,3 x 1,2 1,8 m
Werkzeugfräsmaschine mit:
3-Achsen Digitalanzeige
- Universalfräskopf
- Stahlabdeckung für Z-Achse
- externer Schaltschrank
6
Metal working and machine toolsOther
Hydraulische Tafelschere WEIKA 3200x10mm<br /><br />Schnittlänge 3200mm<br />Max. Schnittstärke /Stahl 10mm<br />Max. Schnittstärke /Edelstahl 5mm<br />Max. Schnittstärke/ Alu 10-12mm<br />Elekrischer Hinteranschlag<br />Lichtschranke<br />Frontauflage mit Kugelrollen<br />Antriebsleistung: 11KW<br /><br /><br />Abmaße:<br />Cl3Zr3H0Wi<br />LxBxH ca. 3,9x2x1,95 Meter<br />Gewicht 8000Kg
Hydraulische Tafelschere WEIKA 3200x10mm<br /><br />Schnittlänge 3200mm<br />Max. Schnittstärke /Stahl 10mm<br />Max. Schnittstärke /Edelstahl 5mm<br />Max. Schnittstärke/ Alu 10-12mm<br />Elekrischer Hinteranschlag<br />Lichtschranke<br />Frontauflage mit Kugelrollen<br />Antriebsleistung: 11KW<br /><br /><br />Abmaße:<br />Cl3Zr3H0Wi<br />LxBxH ca. 3,9x2x1,95 Meter<br />Gewicht 8000Kg
8
Metal working and machine toolsLathesCenter lathes and spindle lathes
Leit u. Zugspindeldrehmaschine / WEILER COMMODOR 180 GSD (Vorführmaschine)Begf9Au-Spitzenweite 1000mm-Spitzenhöhe 180mm-Stangendurchlass 56mm-Umlauf. über Bett 380mm-Umlauf. über Planschieber 215mm-Drehzahlbereich / Getriebemaschine 25-2000U/min-Automatische Längs/Planvorschübe-Gewinde /Metrisch /Zoll/Diametral-Pinolenkegel MK4-Pinolenhub 150mm-3 - Achsdigitalanzeige-Kühlmitteleinrichtung-Multifix mit Einsätzen-Dreibackenfutter - 200mm-Arbeitslicht-Spänerückwand-DokumentationAbmaße:LxBxH 2,6x1,4x1,7Meter /Gewicht: 1900Kg
Leit u. Zugspindeldrehmaschine / WEILER COMMODOR 180 GSD (Vorführmaschine)
Begf9Au
-Spitzenweite 1000mm
-Spitzenhöhe 180mm
-Stangendurchlass 56mm
-Umlauf. über Bett 380mm
-Umlauf. über Planschieber 215mm
-Drehzahlbereich / Getriebemaschine 25-2000U/min
-Automatische Längs/Planvorschübe
-Gewinde /Metrisch /Zoll/Diametral
-Pinolenkegel MK4
-Pinolenhub 150mm
-3 - Achsdigitalanzeige
-Kühlmitteleinrichtung
-Multifix mit Einsätzen
-Dreibackenfutter - 200mm
-Arbeitslicht
-Spänerückwand
-Dokumentation
Abmaße:
LxBxH 2,6x1,4x1,7Meter /Gewicht: 1900Kg
Begf9Au
-Spitzenweite 1000mm
-Spitzenhöhe 180mm
-Stangendurchlass 56mm
-Umlauf. über Bett 380mm
-Umlauf. über Planschieber 215mm
-Drehzahlbereich / Getriebemaschine 25-2000U/min
-Automatische Längs/Planvorschübe
-Gewinde /Metrisch /Zoll/Diametral
-Pinolenkegel MK4
-Pinolenhub 150mm
-3 - Achsdigitalanzeige
-Kühlmitteleinrichtung
-Multifix mit Einsätzen
-Dreibackenfutter - 200mm
-Arbeitslicht
-Spänerückwand
-Dokumentation
Abmaße:
LxBxH 2,6x1,4x1,7Meter /Gewicht: 1900Kg
7
Metal working and machine toolsLathesCenter lathes and spindle lathes
WEILER COMMODOR 230 / Heidenhain-Digitalanzeige / GS-Kennung<br /><br />-Spitzenhöhe 230mm<br />-Spitzenweite 1000mm<br />-Spindelbohrung 56mm<br />-Drehdurchmesser über Bett 475mm<br />-Umlaufdurchmesser über Planschieber 270mm<br />-Drehzahlbereich 25-2000 U/min<br />-Automatische Längs/Planvorschübe<br />-Gewinde / Metrisch /Zoll<br />-Reitstock MK 4<br />-Dreibackenfutter 200mm<br />-Schnellwechselhalter mit Einsatz<br />-Kühlmitteleinrichtung<br />-Futterschutz<br />Mrzflskk<br />-Spänerückwand<br />-Arbeitsleuchte<br />-2xNOT/AUS<br />-Maschinenfüße<br />-Dokumentation<br /><br /><br />Abmaße:<br />LxBxH 2,5x1,5x1,7 Meter<br />Gewicht:1800Kg<br />
WEILER COMMODOR 230 / Heidenhain-Digitalanzeige / GS-Kennung<br /><br />-Spitzenhöhe 230mm<br />-Spitzenweite 1000mm<br />-Spindelbohrung 56mm<br />-Drehdurchmesser über Bett 475mm<br />-Umlaufdurchmesser über Planschieber 270mm<br />-Drehzahlbereich 25-2000 U/min<br />-Automatische Längs/Planvorschübe<br />-Gewinde / Metrisch /Zoll<br />-Reitstock MK 4<br />-Dreibackenfutter 200mm<br />-Schnellwechselhalter mit Einsatz<br />-Kühlmitteleinrichtung<br />-Futterschutz<br />Mrzflskk<br />-Spänerückwand<br />-Arbeitsleuchte<br />-2xNOT/AUS<br />-Maschinenfüße<br />-Dokumentation<br /><br /><br />Abmaße:<br />LxBxH 2,5x1,5x1,7 Meter<br />Gewicht:1800Kg<br />
9
Metal working and machine toolsOther
MUBEA BFL 350 - ProfistahlschereKomplette Technische Daten siehe DatenblattAbmessung: LxBxH1,2x0,8x1,8 Meter / Gewicht 1200KGBeg7303
MUBEA BFL 350 - Profistahlschere
Komplette Technische Daten siehe Datenblatt
Abmessung: LxBxH
1,2x0,8x1,8 Meter / Gewicht 1200KG
Beg7303
Komplette Technische Daten siehe Datenblatt
Abmessung: LxBxH
1,2x0,8x1,8 Meter / Gewicht 1200KG
Beg7303
6
Metal working and machine toolsSanding machinesCylindrical grinding machines
WMW - Rundschleifmaschine Typ SA 200x800-Schleifdurchmesser ca. 220mm-Schleiflänge ca. 800mmF97Pfyt-Stufenlose Drehzahlregulierung / Spindelstock-Kühlmitteleinrichtung-Diverse Schleifscheiben / Scheibenflansche-Schleifscheibenabzieher-ArbeitsleuchteAbmaße:LxBxH ca. 3x1,5x1,7 MeterGewicht ca. 3000Kg
WMW - Rundschleifmaschine Typ SA 200x800
-Schleifdurchmesser ca. 220mm
-Schleiflänge ca. 800mm
F97Pfyt
-Stufenlose Drehzahlregulierung / Spindelstock
-Kühlmitteleinrichtung
-Diverse Schleifscheiben / Scheibenflansche
-Schleifscheibenabzieher
-Arbeitsleuchte
Abmaße:
LxBxH ca. 3x1,5x1,7 Meter
Gewicht ca. 3000Kg
-Schleifdurchmesser ca. 220mm
-Schleiflänge ca. 800mm
F97Pfyt
-Stufenlose Drehzahlregulierung / Spindelstock
-Kühlmitteleinrichtung
-Diverse Schleifscheiben / Scheibenflansche
-Schleifscheibenabzieher
-Arbeitsleuchte
Abmaße:
LxBxH ca. 3x1,5x1,7 Meter
Gewicht ca. 3000Kg
7
Metal working and machine toolsLathesCenter lathes and spindle lathes
WEILER COMMODOR incl. 3-Achsdigitalanzeige-Führungen einwandfrei-GS Kennung-Drehlänge 1000mm-Drehdurchmesser max. 360mm-Stangendurchlass 56mm-Drehzahlbereich 25 - 2000 U/min-Automatische Längs / Planvorschübe-Gewinde / Metrisch / Zoll / usw.-Reitstock Mk4-Dreibackenfutter - Röhm ca. 200mm-Multifixgrundhalter mit Einsätzen-Bettanschlag-Kühlmitteleinrichtung-Futterschutz-2x NOT / AUS-Spänerückwand-MaschinendokumentationAbmaße:Ojvk9GrsLxBxH 2,7x1,5x1,7 Meter / Gewicht 1,6 to
WEILER COMMODOR incl. 3-Achsdigitalanzeige
-Führungen einwandfrei
-GS Kennung
-Drehlänge 1000mm
-Drehdurchmesser max. 360mm
-Stangendurchlass 56mm
-Drehzahlbereich 25 - 2000 U/min
-Automatische Längs / Planvorschübe
-Gewinde / Metrisch / Zoll / usw.
-Reitstock Mk4
-Dreibackenfutter - Röhm ca. 200mm
-Multifixgrundhalter mit Einsätzen
-Bettanschlag
-Kühlmitteleinrichtung
-Futterschutz
-2x NOT / AUS
-Spänerückwand
-Maschinendokumentation
Abmaße:
Ojvk9Grs
LxBxH 2,7x1,5x1,7 Meter / Gewicht 1,6 to
-Führungen einwandfrei
-GS Kennung
-Drehlänge 1000mm
-Drehdurchmesser max. 360mm
-Stangendurchlass 56mm
-Drehzahlbereich 25 - 2000 U/min
-Automatische Längs / Planvorschübe
-Gewinde / Metrisch / Zoll / usw.
-Reitstock Mk4
-Dreibackenfutter - Röhm ca. 200mm
-Multifixgrundhalter mit Einsätzen
-Bettanschlag
-Kühlmitteleinrichtung
-Futterschutz
-2x NOT / AUS
-Spänerückwand
-Maschinendokumentation
Abmaße:
Ojvk9Grs
LxBxH 2,7x1,5x1,7 Meter / Gewicht 1,6 to
3
Metal working and machine toolsDrilling machines and boring millsHighspeed radial drilling machines
DONAU DR 23 / Schnellradialbohrmaschine-Bohrleistung / Stahl ca. 28mm-Ausladung 700mm-Spindelkonus MK3-Drehzahlbereich 70-1550 U/min / Getriebeschaltung-Vorschubbereich 0,075 - 0,3mm-Bohrtiefe 130mm-Gewindeschneideinrichtung-Hydraulische Klemmung-Seitliche Aufspannfläche für grössere Werkstücke-Bohrfutter-DokumentationAbmaße:LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
DONAU DR 23 / Schnellradialbohrmaschine
-Bohrleistung / Stahl ca. 28mm
-Ausladung 700mm
-Spindelkonus MK3
-Drehzahlbereich 70-1550 U/min / Getriebeschaltung
-Vorschubbereich 0,075 - 0,3mm
-Bohrtiefe 130mm
-Gewindeschneideinrichtung
-Hydraulische Klemmung
-Seitliche Aufspannfläche für grössere Werkstücke
-Bohrfutter
-Dokumentation
Abmaße:
LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
-Bohrleistung / Stahl ca. 28mm
-Ausladung 700mm
-Spindelkonus MK3
-Drehzahlbereich 70-1550 U/min / Getriebeschaltung
-Vorschubbereich 0,075 - 0,3mm
-Bohrtiefe 130mm
-Gewindeschneideinrichtung
-Hydraulische Klemmung
-Seitliche Aufspannfläche für grössere Werkstücke
-Bohrfutter
-Dokumentation
Abmaße:
LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
6
Metal working and machine toolsLathesCenter lathes and spindle lathes
WEILER COMMODOR 230 AC / CE-Kennung / 3-Achsdigital-Spitzenhöhe 230mm-Spitzenweite 1000mm-Stangendurchlass 56mm-Drehdurchmesser über Bett 475mm-Umlaufdurchmesser über Planschieber 270mm-Drehzahlbereich 25-2000 U/min (stufenlos über Poti)-Automatische Längs / Planvorschübe-Gewinde / Metrisch / Zoll / Pitch-Reitstock MK 4-Schnellwechselhalter mit Einsatz-Kühlmitteleinrichtung-Spänerückwand-Futterschutz elektrisch-Dreibackenfutter 200mm-2x Not / Aus-DokumentationCdlgflglAbmaße:LxBxH 2,6x1,5x1,7Meter / Gewicht 1800 Kg
WEILER COMMODOR 230 AC / CE-Kennung / 3-Achsdigital
-Spitzenhöhe 230mm
-Spitzenweite 1000mm
-Stangendurchlass 56mm
-Drehdurchmesser über Bett 475mm
-Umlaufdurchmesser über Planschieber 270mm
-Drehzahlbereich 25-2000 U/min (stufenlos über Poti)
-Automatische Längs / Planvorschübe
-Gewinde / Metrisch / Zoll / Pitch
-Reitstock MK 4
-Schnellwechselhalter mit Einsatz
-Kühlmitteleinrichtung
-Spänerückwand
-Futterschutz elektrisch
-Dreibackenfutter 200mm
-2x Not / Aus
-Dokumentation
Cdlgflgl
Abmaße:
LxBxH 2,6x1,5x1,7Meter / Gewicht 1800 Kg
-Spitzenhöhe 230mm
-Spitzenweite 1000mm
-Stangendurchlass 56mm
-Drehdurchmesser über Bett 475mm
-Umlaufdurchmesser über Planschieber 270mm
-Drehzahlbereich 25-2000 U/min (stufenlos über Poti)
-Automatische Längs / Planvorschübe
-Gewinde / Metrisch / Zoll / Pitch
-Reitstock MK 4
-Schnellwechselhalter mit Einsatz
-Kühlmitteleinrichtung
-Spänerückwand
-Futterschutz elektrisch
-Dreibackenfutter 200mm
-2x Not / Aus
-Dokumentation
Cdlgflgl
Abmaße:
LxBxH 2,6x1,5x1,7Meter / Gewicht 1800 Kg
10
Metal working and machine toolsOther
ERCOLINA - TOP BENDER mit Werkzeugen-CE Kennung-Baujahr 2005-Technische Daten siehe Datenblätter-Diverse Werkzeuge samt Gleitschienen(Aufstellung)-Fußschalter-DokumentationFzilbrsAbmaße:LxBxH 0,8x0,6x1,2 Meter / Gewicht 350 Kg
ERCOLINA - TOP BENDER mit Werkzeugen
-CE Kennung
-Baujahr 2005
-Technische Daten siehe Datenblätter
-Diverse Werkzeuge samt Gleitschienen(Aufstellung)
-Fußschalter
-Dokumentation
Fzilbrs
Abmaße:
LxBxH 0,8x0,6x1,2 Meter / Gewicht 350 Kg
-CE Kennung
-Baujahr 2005
-Technische Daten siehe Datenblätter
-Diverse Werkzeuge samt Gleitschienen(Aufstellung)
-Fußschalter
-Dokumentation
Fzilbrs
Abmaße:
LxBxH 0,8x0,6x1,2 Meter / Gewicht 350 Kg
7
Metal working and machine toolsOther
ERCOLINA - Topbender / TB050 T-Technische Daten siehe Datenbläter-CE - Kennung-Fußschalter-1x Werkzeug + Gleitschiene / R100 - 1-1/4GGfhd7QtxvAbmaße:LxBxH 0,8x0,6x1,2 Meter / Gewicht 200Kg
ERCOLINA - Topbender / TB050 T
-Technische Daten siehe Datenbläter
-CE - Kennung
-Fußschalter
-1x Werkzeug + Gleitschiene / R100 - 1-1/4G
Gfhd7Qtxv
Abmaße:
LxBxH 0,8x0,6x1,2 Meter / Gewicht 200Kg
-Technische Daten siehe Datenbläter
-CE - Kennung
-Fußschalter
-1x Werkzeug + Gleitschiene / R100 - 1-1/4G
Gfhd7Qtxv
Abmaße:
LxBxH 0,8x0,6x1,2 Meter / Gewicht 200Kg
3
Metal working and machine toolsOther
Gleitschleifanlage / KROMAS VM 200 ED-Volumen 200LiterDpers7-Steuerung - An / Aus - Timer - Drehzahl-Max. Beladung 800Kg-Drehzahl 1500 U/min-Schmutzwasserentleerung-Beschichtung in OrdnungAbmaße:LxBxH 1,1x1,2x1,4 Meter / Gewicht 500Kg
Gleitschleifanlage / KROMAS VM 200 ED
-Volumen 200Liter
Dpers7
-Steuerung - An / Aus - Timer - Drehzahl
-Max. Beladung 800Kg
-Drehzahl 1500 U/min
-Schmutzwasserentleerung
-Beschichtung in Ordnung
Abmaße:
LxBxH 1,1x1,2x1,4 Meter / Gewicht 500Kg
-Volumen 200Liter
Dpers7
-Steuerung - An / Aus - Timer - Drehzahl
-Max. Beladung 800Kg
-Drehzahl 1500 U/min
-Schmutzwasserentleerung
-Beschichtung in Ordnung
Abmaße:
LxBxH 1,1x1,2x1,4 Meter / Gewicht 500Kg