Plattenlänge: 3740 mm
Plattenbreite: 2400 mm
Plattenhöhe: 300 mm
T-Nutenbreite: 45/80 mm
T-Nuten - Abstand: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Plattenlänge: 3740 mm
Plattenbreite: 2400 mm
Plattenhöhe: 300 mm
T-Nutenbreite: 45/80 mm
T - Nutenabstand: 300 mm
Anzahl der T-Nuten: 8
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Plattenlänge: 3500 mm
Plattenbreite: 1750 mm
Plattenhöhe: 400 mm
T-Nuten - Breite: 340 mm
T - Nutenabstand: 250 mm
Anzahl der T-Nuten: 7
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Plattenlänge: 3500 mm
Plattenbreite: 1600 mm
Plattenhöhe: 180 mm
T-Nuten - Abstand: 175 mm
T-Nuten - Breite: 30/50 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 7 t
Raumbedarf ca.: 4000x1600x250 m

Plattenlänge: 3000 mm
Plattenbreite: 2250 mm
Plattenhöhe: 260 mm
T-Nuten - Abstand: 250 mm
T-Nuten - Breite: 28/47 mm
T-Nuten: 9
Tisch: Kante 930
Stahl Regalfüße: 4

Länge: 3000 mm
Breite: 2000 mm
Anzahl der T-Nuten: 7

Plattenlänge: 2500 mm
Plattenbreite: 1800 mm
Plattenhöhe: 600 mm

Plattenlänge: 2000 mm
Plattenbreite: 1500 mm
Plattenhöhe: 260 mm
T-Nuten: 22/40 mm
Anzahl der T-Nuten: 7
Abstand der T-Nuten längs: 200 mm
Abstand der T-Nuten quer: 200 mm
Maschinengewicht ca.: 1,50 t

Plattenlänge: 1800 mm
Plattenbreite: 1600 mm
Plattenhöhe: 160 mm
T-Nutenbreite: 28/48 mm
T - Nutenabstand: 200 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Plattenlänge: 1200 mm
Plattenbreite: 840 mm
Plattenhöhe: 150 mm
T-Nuten - Abstand: 100 mm
T-Nuten - Breite: 38/22 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 0,5 t
Raumbedarf ca.: m

Länge: 2400 mm
Breite: 3100 mm
Tischhöhe: 660 mm
Dicke: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 7 t
Raumbedarf ca.: 2,4x3,1x0,66 m

Tischlänge: 12000 mm
Tischbreite: 8000 mm
Tischhöhe: 800 mm
Dicke der Platte: 300
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 82,5 t
Raumbedarf ca.: 12x8 m

Tischlänge: 1000 mm
Tischbreite: 1008 mm
Tischhöhe: 130 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m

Grote 16L Heated butter pump, 2013, stainless, 16L heated butter pump, agitated hopper, discharge screw, mobile, 3Ph

Vortex Robopop Mark IV, popcorn machine 2016, stainless, hot air popper for making popcorn, up to 28Kgs per hour, 3Ph

Saw blade diameter: 360 mm
Saw blade dimensions: Ø360 x 40 mm
Saw blade speed: 40 - 280 rpm
Cutting capacity 0°: round: 20 - 100 mm, square: 20 - 60 mm
Min. rest piece length: 60 mm
Feeding length: 10 - 9999 mm
Working height: 900 mm
Motor: 15 kW
Total power: 21 kW
Width: 3400 mm
Depth: 2675 mm
Height: 2750 mm
Weight: 3450 kg

Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.55 kW
Length: 1400 mm
Width: 1200 mm
Height: 1550 mm
Weight: 190 kg

Macmon M100 Universalfräsmaschine mit Vertikalkopf

-Frässpindel
-Anzahl der Spindeldrehzahlen: 16
-Spindeldrehzahlen: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 U/min
-Spindel-Innenkegel: ISO 40
-Spannzangenbohrung bis: 25 mm Ø
-Spindelblock
-Spindelblockverschiebung von Hand: 170 mm
-Senkrechtfrästisch
-Größe der Aufspannfläche: 640 × 195 mm
-2 T-Nuten, Breite/Abstand: 12 / 90 mm
-Längsbewegung selbsttätig/von Hand: 290 / 310 mm
-Senkrechtbewegung selbsttätig/von Hand: 310 / 340 mm
-Vorschubgetriebe
-Anzahl der Vorschübe: 16
-Größe der Vorschübe (mm/min): 9, 14, 18, 22,4, 28, 35,5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450
-Bewegungsspindeln
-Längsbewegung des Tisches (1 Umdrehung): 5 mm
-Senkrechtbewegung des Tisches (1 Umdrehung): 2,5 mm
-Spindelblockbewegung (1 Umdrehung): 2 mm
-1 Teilstrich (längs u. senkrecht): 0,02 mm
-1 Teilstrich (quer): 0,01 mm
-Antriebsmotor
-Leistung: 1,3 / 1,8 kW
-Drehzahl: 700 / 1400 U/min
-Übertragungselemente
-2 Keilriemen DIN 2215: 13 × 8 × 1500 mm (Innenlänge)

Abmaße:
LxBxH 1,0x1,0x1,3 Meter / Gewicht 700Kg

Werkzeugfräsmaschine Deckel FP 2 / 3-Achsdigitalanzeige Heidenhain ND 780

-Verfahrwege X/Y/Z: 450 x 200 x 400 mm
-Tischaufspannfläche 700 x 350/Kipp-Schwenk-Drehtisch
-Drehzahlbereich: 40–2000 U/min
-Vorschübe & Eilgänge in allen drei Achsen
-Werkzeugaufnahme: ISO 40
-Vertikal/Horizontalfräseinrichtung mit Vertikal-Schiebekopf
-Kühlmitteleinrichtung
-3-Achsdigitalanzeige: Heidenhain ND 780
-Dokumentation
-Spänewanne
-Diverse Werkzeugaufnahmen
-Spannzangen

Abmaße:
LxB xH 1,5x1,7x1,8 Meter / Gewicht 1600Kg

Universalfräsmaschine HERMLE UWF 802 M mit Streckensteuerung HS 401

-HS 401- Streckensteuerung
-Verfahrwege X / Y / Z 500x430x400mm
-Starrer Winkeltisch
-Drehzahlbereich 18-3550 U/min
-Vorschub stufenlos in allen drei Achsen 0-1600 mm/min
-Eilgänge 0-1,6 M/min in allen drei Achsen
-Vertikal - Horizontalfräseinrichtung
-Werkzeugaufnahme ISO 40
-Hydraulische Werkzeugspannung
-Zentralschmierung
-Spänewanne
-Antriebsleistung 6 KW
-Arbeitsleuchte
-Spindelschutz
-Dokumentation

Abmaße LxBxH 1,9x1,8x1,9 Meter / Gewicht: 1800Kg

Weiler Condor B mit Heidenhain 3 - Achs Digitalanzeige

-Umlaufdurchmesser über Bett 330mm
-Drehdurchmesser über dem Planschlitten 185mm
-Spitzenhöhe 165mm
-Drehlänge 750mm
-Spindeldrehzahlen 22-2800 U/min
-Spindeldurchlass 40mm
-Reitstock-Pinolenaufnahme MK 3
-Pinolenhub 110mm
-Gesamtleistungsbedarf 3kW
-Heidenhain 3 - Achs Digitalanzeige
-Multifix Halter
-Multifix Kasette 3 Stück
-3 Backenfutter Forkardt
-div. Maschinenschlüssel
-Maschinenfüsse
-LED Arbeitsleuchte
-Futterschutz mit elektrischer Abschaltung
-Revolveranschlag
-Doku/Bedienungsanleitung

Abmaße:
LxBxH 1,8x0,8x1,2 Meter / 1040Kg

Saw frame: Double column
Band dimensions: 3270x27x0,9 mm
Band speed: 40/80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 350x260 mm
Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm
Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm
Working height: 830 mm
Motor: 1.5 kW
Length: 1500 mm
Width: 1600 mm
Height: 1900 mm
Weight: 590 kg

Ref. no.: 18657
Manufacturer: ENGEL
Year of construction: 2016

Clamping unit
Clamping force: 160 ton
Opening stroke: 900 mm
Mould height min.: 300 mm
Mould height max.: 600 mm
Platen size (h x v): 750 X 750 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 151 g
Injection pressure: 2400 bar

Measurements and weight
Dimensions: 5,7 X 1,8 X 2,2 m
Machine weight: 10200 kg

Further information:
Tie-bar-less + electric injection = maximum flexibility and precision

ENGEL e-victory 440/160:
This is a hybrid machine (servo-hydraulic + electric)
How it works

Electric part:

* Injection unit (screw movement)
* Ensures very high precision and process stability

Hydraulic part:

* Clamping unit (mould closing)
* Maintains clamping force efficiently without continuous energy consumption

This system combines:

* The precision of an all-electric machine
* With the power and efficiency of a hydraulic system

This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design.

The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing.

Key features:

* Tie-bar-less design for maximum mould flexibility
* Servo-hydraulic drive for high energy efficiency
* Precise and stable processing performance
* Compact footprint with a large mould installation area
* Modern ENGEL control system

The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures.

Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.

Drilling capacy mild steel: 25 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg

Drilling capacy mild steel: 25 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg

Saw frame: Pivot frame
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 610x440 mm
Cutting capacity 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity 60°: rund 320 mm, quadrat 250 mm, rechteck 250 x 440 mm
Cutting capacity - 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity - 60°: rund 320 mm, quadrat 285 mm, rechteck 285 x 440 mm
Working height: 860 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1540 kg

Saw frame: Pivot frame
Band dimensions: 3160x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 270 mm
Cutting capacity 0° square: 270 mm
Cutting capacity 0° flat: 340 x 220 mm
Cutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mm
Cutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mm
Cutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mm
Working height: 910 mm
Hydraulic motor: 0.37 kW
Motor: 1.5 kW
Coolant pump motor: 0.12 kW
Length: 1730 mm
Width: 770 mm
Height: 1460 mm
Weight: 476 kg

Saw frame: Pivot frame
Band dimensions: 2730x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 230 mm
Cutting capacity 0° square: 230 mm
Cutting capacity 0° flat: 320x130 mm
Cutting capacity 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160 mm
Cutting capacity 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100 mm
Cutting capacity - 45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100 mm
Working height: 760 mm
Hydraulic motor: 0.37 kW
Motor: 1.3 kW
Coolant pump motor: 0.12 kW
Length: 1350 mm
Width: 700 mm
Height: 1300 mm
Weight: 430 kg

Drilling capacy mild steel: 20 mm
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg

Drilling capacy mild steel: 23 mm
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 20 - 2000 r.p.m.
Motor: 1 kW
Tapping capacity: M16x1
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg

Drilling capacy mild steel: 20 mm
Taper: MK 2
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 100 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg

Drilling capacy mild steel: 15 mm
Taper: MK 2
Distance spindle - column: 220 mm
Revs: 40 - 4000 r.p.m.
Tapping capacity: M12
Quill travel: 70 mm
Distance spindle - table: 85 - 370 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 400 mm
Width: 520 mm
Height: 850 mm
Weight: 65 kg

Drilling capacy mild steel: 6 mm
Taper: B 12
Distance spindle - column: 220 mm
Revs: 100 - 10000 r.p.m.
Tapping capacity: M5
Quill travel: 60 mm
Distance spindle - table: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 452 mm
Width: 700 mm
Height: 1130 mm
Weight: 44 kg

Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 220 mm
Revs: 60 - 6000 r.p.m.
Quill travel: 60 mm
Distance spindle - table: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 350 mm
Width: 520 mm
Height: 820 mm
Weight: 44 kg

Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 220 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 60 mm
Distance spindle-base: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 320 mm
Width: 520 mm
Height: 820 mm
Weight: 44 kg

Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 220 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 60 mm
Distance spindle - table: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 320 mm
Width: 520 mm
Height: 820 mm
Weight: 44 kg

pressing capacity: 100 to
Tonnage rating point: 4.5 mm
Table length: 700 mm
Table width: 1000 mm
Hole in table: 210 mm
Stroke: 1 - 132 mm
Strokes: 58 1/min
Ram guides: 6
Ram adjustment: 90 mm
Ram hole: 60 mm
Throat depth: 300 mm
Daylight: 445 mm
Motor: 7.5 kW
Length: 1650 mm
Width: 1545 mm
Height: 3011 mm
Weight: 7000 kg

Delfin Auriga 500 Flow wrapper, Serial: 11110, 2016, flow wrapper, jaw width 230mm, up to 120 cycles per min, infeed length 2100mm, overall length 3700mm, HMI touch screen controls, reel holder up to 500mm film, 3Ph

Flexion modulus: 4 cm³
Standard steel tube: 42 x 3 mm
Furniture tube: 48 x 1,5 mm
FE35 (for hydraulic tubes): 42 x 4 mm
Stainless steel AISI304-318: 42 x 3 mm
Stainless steel AISI308 (food industry): 42 x 2,5 mm
Brass soft: 50 x 3 mm
Hard copper and aluminium: 54 x 2 mm
Soft copper: 60 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 30 mm
Flatsteel solid (S275JO): 40x20 (liegend), 40x12 (stehend) mm
Max. bending radius: 260 mm
Min. bending radius: 10 mm
Max. bending speed: 4 r/min
Motor: 1.1 kW
Length: 400 mm
Width: 570 mm
Height: 1000 mm
Weight: 80 kg

Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg

Length: 585 mm
Width: 700 mm
Height: 170 mm
Weight: 240 kg

Bending length: 1050 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 75 mm
Motor power: 1.5 kW
Length: 1610 mm
Width: 700 mm
Height: 1160 mm
Weight: 385 kg

Saw blade diameter: 300 mm
Saw blade dimensions: 300 x (2)2,5 x 32 mm
Saw blade speed: Array rpm
Mitre left: 45 °
Mitre right: 45 °
Cutting capacity 0°: rund 102 mm, Quadratprofil 90 mm, Rechteckprofil 120 x 80 mm
Cutting capacity 45° right: rund 90 mm, Quadratprofil 80 mm, Rechteckprofil 90 x 70 mm
Cutting capacity 45° left: rund 80 mm, Quadratprofil 70 mm, Rechteckprofil 85 x 70 mm
Width: 500 mm
Depth: 1050 mm
Height: 990 mm
Weight: 135 kg

pressing capacity: 100 to
Tonnage rating point: 5 mm
Table length: 1000 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 140 mm
Strokes: 45 - 70 1/min
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 570 mm
Motor: 11 kW
Length: 1320 mm
Width: 2200 mm
Height: 3080 mm
Weight: 10000 kg

Ref. no.: 18597
Manufacturer: ENGEL
Year of construction: 2007

Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar

Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg

Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.

One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.

Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.

The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.

The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.

The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.

The ENGEL INSERT series is particularly suitable for:

* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products

With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

pressing capacity: 160 to
Stroke: 400 mm
Ram: 1000x680 mm
Table: 1000x750 mm
Daylight: 765 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 22 kW
Length: 2400 mm
Width: 1525 mm
Height: 3900 mm
Weight: 10500 kg

pressing capacity: 100 to
Stroke: 400 mm
Ram: 850x630 mm
Table: 850x640 mm
Daylight: 685 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 11 kW
Length: 2030 mm
Width: 1150 mm
Height: 3565 mm
Weight: 7700 kg

pressing capacity: 63 to
Stroke: 400 mm
Ram: 750x570 mm
Table: 750x625 mm
Daylight: 630 mm
Rapid speed: 300 mm/s
Working speed: 10-25 mm/s
Motor: 7.5 kW
Length: 1710 mm
Width: 1150 mm
Height: 3170 mm
Weight: 4900 kg

pressing capacity: 150 to
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg

pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 17.5 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1850 mm
Width: 1400 mm
Height: 2650 mm
Weight: 5400 kg