Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 220 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 60 mm
Distance spindle-base: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 320 mm
Width: 520 mm
Height: 820 mm
Weight: 44 kg

Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 220 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 60 mm
Distance spindle - table: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 320 mm
Width: 520 mm
Height: 820 mm
Weight: 44 kg

pressing capacity: 100 to
Tonnage rating point: 4.5 mm
Table length: 700 mm
Table width: 1000 mm
Hole in table: 210 mm
Stroke: 1 - 132 mm
Strokes: 58 1/min
Ram guides: 6
Ram adjustment: 90 mm
Ram hole: 60 mm
Throat depth: 300 mm
Daylight: 445 mm
Motor: 7.5 kW
Length: 1650 mm
Width: 1545 mm
Height: 3011 mm
Weight: 7000 kg

Delfin Auriga 500 Flow wrapper, Serial: 11110, 2016, flow wrapper, jaw width 230mm, up to 120 cycles per min, infeed length 2100mm, overall length 3700mm, HMI touch screen controls, reel holder up to 500mm film, 3Ph

Flexion modulus: 4 cm³
Standard steel tube: 42 x 3 mm
Furniture tube: 48 x 1,5 mm
FE35 (for hydraulic tubes): 42 x 4 mm
Stainless steel AISI304-318: 42 x 3 mm
Stainless steel AISI308 (food industry): 42 x 2,5 mm
Brass soft: 50 x 3 mm
Hard copper and aluminium: 54 x 2 mm
Soft copper: 60 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 30 mm
Flatsteel solid (S275JO): 40x20 (liegend), 40x12 (stehend) mm
Max. bending radius: 260 mm
Min. bending radius: 10 mm
Max. bending speed: 4 r/min
Motor: 1.1 kW
Length: 400 mm
Width: 570 mm
Height: 1000 mm
Weight: 80 kg

Length: 585 mm
Width: 700 mm
Height: 170 mm
Weight: 240 kg

Bending length: 1050 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 75 mm
Motor power: 1.5 kW
Length: 1610 mm
Width: 700 mm
Height: 1160 mm
Weight: 385 kg

Saw blade diameter: 300 mm
Saw blade dimensions: 300 x (2)2,5 x 32 mm
Saw blade speed: Array rpm
Mitre left: 45 °
Mitre right: 45 °
Cutting capacity 0°: rund 102 mm, Quadratprofil 90 mm, Rechteckprofil 120 x 80 mm
Cutting capacity 45° right: rund 90 mm, Quadratprofil 80 mm, Rechteckprofil 90 x 70 mm
Cutting capacity 45° left: rund 80 mm, Quadratprofil 70 mm, Rechteckprofil 85 x 70 mm
Width: 500 mm
Depth: 1050 mm
Height: 990 mm
Weight: 135 kg

pressing capacity: 100 to
Tonnage rating point: 5 mm
Table length: 1000 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 140 mm
Strokes: 45 - 70 1/min
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 570 mm
Motor: 11 kW
Length: 1320 mm
Width: 2200 mm
Height: 3080 mm
Weight: 10000 kg

Ref. no.: 18597
Manufacturer: ENGEL
Year of construction: 2007

Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar

Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg

Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.

One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.

Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.

The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.

The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.

The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.

The ENGEL INSERT series is particularly suitable for:

* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products

With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

pressing capacity: 160 to
Stroke: 400 mm
Ram: 1000x680 mm
Table: 1000x750 mm
Daylight: 765 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 22 kW
Length: 2400 mm
Width: 1525 mm
Height: 3900 mm
Weight: 10500 kg

pressing capacity: 100 to
Stroke: 400 mm
Ram: 850x630 mm
Table: 850x640 mm
Daylight: 685 mm
Rapid speed: 250 mm/s
Working speed: 10-20 mm/s
Motor: 11 kW
Length: 2030 mm
Width: 1150 mm
Height: 3565 mm
Weight: 7700 kg

pressing capacity: 63 to
Stroke: 400 mm
Ram: 750x570 mm
Table: 750x625 mm
Daylight: 630 mm
Rapid speed: 300 mm/s
Working speed: 10-25 mm/s
Motor: 7.5 kW
Length: 1710 mm
Width: 1150 mm
Height: 3170 mm
Weight: 4900 kg

pressing capacity: 150 to
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg

pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 17.5 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1850 mm
Width: 1400 mm
Height: 2650 mm
Weight: 5400 kg

pressing capacity: 60 to
Stroke: 250 mm
Ram: 500x430 mm
Table: 750x500 mm
Daylight: 450 mm
Rapid speed: 26 mm/s
Working speed: 85 mm/s
Retraction speed: 47 mm/s
Motor: 7.5 kW
Length: 1820 mm
Width: 960 mm
Height: 2400 mm
Weight: 4000 kg

pressing capacity: 30 to
Stroke: 200 mm
Ram: 500x380 mm
Table: 700x450 mm
Daylight: 400 mm
Rapid speed: 54 mm/s
Working speed: 18 mm/s
Retraction speed: 90 mm/s
Motor: 7.5 kW
Length: 1680 mm
Width: 850 mm
Height: 250 mm
Weight: 2950 kg

pressing capacity: 260 to
Stroke: 500 mm
Table: 1400x1000 mm
Daylight: 600 mm
Rapid speed: 75 mm/s
Working speed: 5 mm/s
Retraction speed: 60 mm/s
Motor: 22 kW
Length: 2800 mm
Width: 1650 mm
Height: 2750 mm

pressing capacity: 170 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm

pressing capacity: 125 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm

pressing capacity: 85 to
Stroke: 500 mm
Table: 900x600 mm
Daylight: 600 mm
Rapid speed: 105 mm/s
Working speed: 7 mm/s
Retraction speed: 58 mm/s
Motor: 7.5 kW
Length: 2250 mm
Width: 1150 mm
Height: 2400 mm

pressing capacity: 60 to
Stroke: 500 mm
Table: 800x500 mm
Daylight: 600 mm
Rapid speed: 120 mm/s
Working speed: 8 mm/s
Retraction speed: 58 mm/s
Motor: 5.5 kW
Length: 1100 mm
Width: 1100 mm
Height: 2350 mm

pressing capacity: 35 to
Stroke: 500 mm
Table: 800x500 mm
Daylight: 600 mm
Rapid speed: 125 mm/s
Working speed: 9 mm/s
Retraction speed: 68 mm/s
Motor: 4 kW
Length: 1100 mm
Width: 1100 mm
Height: 2300 mm

pressing capacity: 150 to
Stroke: 500 mm
Table: 1250x1000 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 23 mm/s
Working speed: 4 mm/s
Motor: 5.5 kW
Length: 1520 mm
Width: 1270 mm
Height: 2500 mm

pressing capacity: 100 to
Stroke: 500 mm
Table: 1000x800 mm
Space between columns: 1000x800 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 5 mm/s
Motor: 4 kW
Length: 1260 mm
Width: 1060 mm
Height: 2400 mm

pressing capacity: 70 to
Stroke: 500 mm
Table: 900x700 mm
Space between columns: 900x700 mm
Daylight: 600 mm
Rapid speed: 25 mm/s
Working speed: 6 mm/s
Motor: 4 kW
Length: 1140 mm
Width: 940 mm
Height: 2350 mm

Universalfräsmaschine HERMLE UWF 802 M mit Streckensteuerung HS 401<br /><br />-HS 401- Streckensteuerung<br />-Verfahrwege X / Y / Z 500x430x400mm<br />-Starrer Winkeltisch<br />-Drehzahlbereich 18-3550 U/min<br />-Vorschub stufenlos in allen drei Achsen 0-1600 mm/min<br />-Eilgänge 0-1,6 M/min in allen drei Achsen<br />-Vertikal - Horizontalfräseinrichtung<br />-Werkzeugaufnahme ISO 40<br />-Hydraulische Werkzeugspannung<br />-Zentralschmierung<br />-Spänewanne<br />-Antriebsleistung 6 KW<br />-Arbeitsleuchte<br />-Spindelschutz<br />-Dokumentation<br /><br />Abmaße LxBxH 1,9x1,8x1,9 Meter / Gewicht: 1800Kg

Bending length: 1250 mm
Sheet thickness (420 N/mm²): 1.25 mm
Max. thickness - stainless steel: 0.8 mm
Max. thickness - aluminium: 2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: geteilt, 45°
Bending flange: adjustment 35 mm
Length: 1500 mm
Width: 750 mm
Height: 1715 mm
Weight: 315 kg

Cutting length: 1250 mm
Max. thickness - mild steel: 1.5 mm
Back gauge: 500 mm
Length: 2250 mm
Width: 1000 mm
Height: 1150 mm
Weight: 460 kg

Cutting length: 1020 mm
Max. thickness - mild steel: 1.5 mm
Back gauge: 500 mm
Length: 1950 mm
Width: 1000 mm
Height: 1150 mm
Weight: 420 kg

Max. thickness - mild steel: 1.2 mm
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 8 pcs.
Rolls diameter: 62 mm
Motor: 0.75 kW
Revs: 32 1/min
Length: 900 mm
Width: 450 mm
Height: 1350 mm
Weight: 135 kg

Cutting length: 2050 mm
Max. thickness - mild steel: 6 mm
Strokes: 30 1/min
Cutting angle: 2.3 °
Back gauge: 750 mm
Motor power: 7.5 kW
Table height: 800 mm
Table width: 530 mm
Table length: 2355 mm
Length: 2720 mm
Width: 1630 mm
Height: 1230 mm
Weight: 3200 kg

Polin K160D Planetary mixer, 2018, two 160L stainless mobile bowls, stainless beater attachment, variable speed, with safety guard, 3Ph

Dietz flighted elevator conveyor, elevates from 200mm and discharges at 1300mm, 100Kg hopper, belt width 300mm, overall length 1600mm, 3Ph

Secomak Shrink tunnel, Serial: 6905, 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph

NSR Flighted elevator conveyor, 2016, stainless, elevates from 200mm to 1300mm, belt width 300mm, with stainless side guides

Bibby 5000L Holding tank, 316 Stainless, 5000L holding tank, central bottom discharge with level sensor

Copeland ZB21KCE-TFD551 Refrigeration pack, 2016, unused, refrigeration pack with Copeland scroll compressor and condensing unit, mounted on enclosed skid, two in stock

ITT Pureflo 600L holding tank, 316 Stainless horizontal jacketed, holding tank, 600L capacity, design temp 150'C, with level detectors

ITT Pureflo 1000L holding tank, 316 Stainless horizontal jacketed, holding tank, insulated, 1000L capacity, design temp 150'C

Webomatic DU60 Dryer, Stainless, Used to dry shrink packaging products thoroughly and gently, Meaning the product is immediately ready for weighing and labelling and cartoning etc, HMI touch screen control, conveyor length 1600mm, max product size 550mm x 270mm, max product weight 70Kg, 3Ph

Siat S26-S Case taper, 2019, semi automatic top and bottom case taper, bottom conveyors and side guides, 3Ph

Inoxpa ESTAMPINOX EFI3 Centrifugal pump, 2016, The EFI pump is a stainless steel centrifugal pump ideal for the transfer of water and other low viscosity liquids, services used in food processing, chemical, pharmaceutical, wine making and more, 4Kw, 3Ph, two in stock

Lowara NSCE50160 Centrifugal pump, Brand new in box, centrifugal pump, 9.2Kw, see plates for full spec

Ziehl-Abegg ER63C4DN Centrifugal fan 2016, 6.3Kw, see plates for spec,

Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage.

Applikon Pilot System 50L fermentation system, Stainless, 50L pilot fermentation system

Viking S2S Lobe pump, Stainless, 4Kw ABB Motor, 35mm inlet and outlet, 3Ph

Inoxpa S20C Centrifugal pump, Stainless, 2.2Kw, 3000RPM, two in stock

Ritai 800L holding vessel, Stainless, 800L capacity, jacketed vessel, holding tank, central bottom discharge