Atlas Copco AQ37VSD compressor, 2017, 13Bar, 37Kw, with Atlas Copco BD100 air dryer and Lohenner 1000L air receiver tank, two lots available

Atlas Copco ZT30 compressor, 2003, 30Kw, 7.5Bar, with Ultrafilter dryer HL-ALD0300M and air receiver tank, two sets in stock

Bohrerdurchmesser: . mm
Bohrerlänge: . mm
Spitzenwinkel: . °

Punching power: 30 ton
Working area: 3000x1500 mm
X-axis movement (+repositioning): 3000 mm
Y-axis movement: 1500 mm
speed of X-axis: 70 m/Min
speed of Y-axis: 60 m/min
speed combined X+Y: 120 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 325 1/min
Max. strokes at marking: 2800 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 28
Positioning accuracy: 0.1 mm
Repeat accuracy: 0.05 mm
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 200 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Oiltank: 180 l
Length without light barrier: 6650 mm
Length with light barrier: 7650 mm
Width without light barrier: 6300 mm
Width with light barrier: 8300 mm
Height: 2310 mm
Weight: 18250 kg

Linde Cryoflex CTFA4-60 Cryogenic Freezer, Serial 3002097/2, 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Hache 1720E Turbidimeter, Hach 1720E Continuous-reading Nephelometric Low Range Process Turbidimeter, Continuously flowing sample flows through the patented bubble removal system, which vents entrained air from the sample stream and eliminates the most significant interference in low level turbidity measurement. The 1720E Turbidimeter is not affected by variations in flow and pressure, The 1720E Turbidimeter uses the sc200 Controller to receive data from up to two sensors. A built-in data logger collects turbidity measurement at user selectable intervals (1-15 minutes), along with calibration and verification points, alarm history, and instrument setup changes for 6 months.

Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,

Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 30 mm
Bevel angle: 60 °
Spindle speed (load-free): 500-2920 rpm
Bevel of tube outer edge: 50 - 150 m/min
Feed speed: 3 mm/min
Work piece height: 100 mm
Motor: 7.5 kW
Length: 1216 mm
Width: 1275 mm
Weight: 850 kg

Weight of machine: 7 kg

Height adjustable, 3 pieces available, height 0.94 m

Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg

little used, from a workshop for the disabled, travel distances 750 x 350

Accessory: balancing device, 1 grinding wheel, 2 holders

Hydrovane HV04 air compressor, Serial: 504020750, 2019, 4Kw, Max Bar 11, RPM 1455, 3Ph, comes with receiver and BEKO drypoint RA dryer,

Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 3220 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg

Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Motor: 1.5 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg

Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg

Polar LW 1000-4 EV lift

Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)

The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.

Customer benefits

Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures

Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant

Substantial reduction of occupational diseases

Technical data

Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)

Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)

Stroke : max.850 mm (33.46 in)

Lifting height : max. 85 cm

Carrying capacity : max.1,000 kg (2,205 lbs)

Net weight : 550 kg

Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)

Power : 0,75 kW

Aksar AFM-BFM Rasgulla Gulabjamun making machine, Rasgulla Gulabjamun making machine, ball forming machine is used for cutting and rounding various types of sweets and food products like rasgulla, gulabjamun, rasmalia, chumchum, peda, chocolate, coconut laddu, sweet balls, kachori, dates balls, riceball and various types of bakery, confectionery and indian snacks, 15L hopper, 10,000 pieces per hour, 1g to 100g, variable speed, mobile, 1Ph

Troath: 500 mm
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m

Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting

Accessory: Work light, belt welding device

Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m

Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.

Accessory: options: more trunk supports

Urschel RA dicer, RA dicer is a centrifugal type dicer, with its capability to cut product into clean cut, uniform pieces in the small to intermediate size range, fruits / vegs / certain cheese and nuts. With two spare boxes of knives, blades, belts cutting heads and more, mobile, 3Ph

Kaeser 2000L Air receiver tank, 2000L air receiver tank, 11Bar, temp 50'C

Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 310x240 mm
Cutting capacity 45°: rund 230 mm, quadrat 230 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Min. rest piece length: 240 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Motor: 1.5 kW
Coolant pump motor: 0.12 kW
Torque feeding carriage motor: 1.95 Nm
Torque motor for automatic bow rotation: 1.95 Nm
Length: 2800 mm
Width: 2000 mm
Height: 1820 mm
Weight: 1200 kg

pressing capacity: 30 to
Tonnage rating point: 2 mm
Table length: 400 mm
Table width: 600 mm
Hole in table: 150 mm
Stroke: 1 - 60 mm
Strokes: 140 1/min
Ram guides: 4
Ram adjustment: 60 mm
Ram hole: 40 mm
Throat depth: 200 mm
Daylight: 300 mm
Motor: 3 kW
Length: 1300 mm
Width: 1150 mm
Height: 2050 mm
Weight: 1670 kg

Lennox PU-06D L02 Condenser Neostar range, Twin fan system, with Tecnac liquid receiver

OKS Air receiver tank, Serial: 575531, 2012, 500L tank, 11Bar

OKS Air receiver tank, Serial: 581851, 2013, 300l air receiver tank, working 11Bar,

x-travel: 1250 mm
y-travel: 910 mm
z-travel: 875 mm
Control: Siemens
Type: 840 D
Pallet size: 800x800 mm
Number of pallets: 2
Speed: 16.5 rpm
Gear stages: 2
Feed: 1-32000 mm/min
Rotary table: 360x1 °
Table load: 1150 kg
Spindle mount ISO: 50
Tool changer: 165 positions.
Total power requirement: kW
Machine weight approx.: 18.5 t
Space requirement approx.: m

Face plate diameter: 3500 mm
Swing diameter: 4000 mm
Turning height: 3150 mm
Support adjustment: 1700 mm
Table load: 25 t
Speed: rpm
Feed: mm/rev
Digital display: Heidenhain
Support: 2
Total power requirement: 90 kW
Machine weight approx.: 95 t
Space requirement approx.: m

Load capacity: 2000kg
Gripping range: 1050-1200 mm
Suspension / size WxL: . 0
Own weight: 180 kg
Load capacity: 2 t
Span: . mm
Total power requirement: . kW
Machine weight approx.: . t
Space requirement approx.: . m

Load capacity: . kg
Gripping range: . mm
Suspension / size WxL: . 0
Own weight: . kg
Load capacity: . t
Span: . mm
Total power requirement: . kW
Machine weight approx.: . t
Space requirement approx.: . m

Throat: 8000 mm
Total column height: 4000 mm
Load capacity in kg: 3000 kg
Height: 4300mm
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Spindle diameter: 120mm
x-travel: 1200 mm
y-travel: 600 mm
z-travel: 600 mm
Speed: 19-1900 rpm
Table size: 600x1200 mm
Table load: 2000 kg
Spindle mount ISO: 50
Feed: 0.042-1.46 mm/rev
Machine weight approx.: . t
Space requirement approx.: . m

Posiweigh Triple200 Three lane linear weighing line, Serial: 3054, 2015, never been in production, weighing capacity up to 1000grams, suitable for dry, free flowing granular or piece type products, hopper capacity 120l, weighpan capacity 5l, two different discharge chutes for single drop of treble drop, comes with vibratory conveyor with 500kg hopper then feeds onto flighted elevator conveyor that feeds into the linear weigher and finally discharges onto a 3m indexing conveyor, supplied with a set of stainless steps, 1Ph

Outreach: 3500 mm
Load capacity in kg: 1000 kg
Pan range: at least 160 degrees
Height: 3000mm
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Load capacity in kg: 2500 kg
Stroke: 2900mm
Fork length: . mm
Total power requirement: kW
Machine weight approx.: 3310 t
Space requirement approx.: m

Faceplate diameter: 1400 mm
Swing diameter: 1600 mm
Turning height: 1500 mm
Control: Siemens
Type: 840D
Workpiece weight: 6500 kg
Support displacement vertical: 1000 mm
Speed: 10-315 rpm
Feed: 3600mm/min
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Faceplate diameter: 1250 mm
Swing diameter: 1500 mm
Turning height: 1250 mm
Control: Siemens
Type: 840 DSl
Tool holder: 4 pos.
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Faceplate diameter: 1200 mm
Swing diameter: 1500 mm
Turning height: 1300 mm
Support adjustment: 800 mm
Side support - horizontal adjustment: 550 mm
Digital display: Heidenhain
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Turning diameter: 820 mm
Turning length: 300mm
Turning diameter over support: 465 mm
Spindle torque: 3000 Nm
Speed: 5.6-1120 rpm
Feed: 1-5000mm/min
Rapid traverse: 5000 mm/min
Tailstock quill mount MK: 6
Three-jaw chuck Forckrath: mm
Bezel: mm
Main drive motor: 50 kW
Main spindle diameter: 170 mm
Spindle passage: 128 mm
Tailstock quill diameter: 125 mm
Tailstock quill stroke: 250 mm
z-axis: 3000 mm
x-axis: 550 mm
Total power requirement: 52 kW
Machine weight approx.: 7.1 t
Space requirement approx.: m

BLOW MOLDING MACHINE BILLION P300
3 liters
Clamping force: 2 x 3.3 T
Closing stroke: 2 x 150 mm
Min mold thickness: 150mm
Platen Dimensions: Horizontal: 310mm x Vertical: 310mm
Screw diameter: 50mm
Screw stroke: 170 mm
Capacity per shot: 333 cm3
Pressure on the material: 1000 kg/cm2
L/D screw ratio: 15
Many spare parts supplied with the machine + several control cabinets + 1 set of molds

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 200
This injection blow molding machine PROCREA REV 200 can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 4 liters and weight of 5 gr. at 200 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 200 is very simple thanks to the automatic extraction system applied to the revolver.

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 150
This PROCREA REV 150 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 1500 cc and weight of 5 gr. at 150 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 150 is very simple thanks to the automatic extraction system applied to the revolver.

PIOVAN RPA 800 mould dryer
Total power : 7,8 KW
Weight : 210 KG
Dimensions: 600 x 750 x 1500 mm
Year 2015 , in perfect condition , only 7000 working hours.

From 700 to 800 m3/h

For ambient temperature up to 45°C and humidity up to 90%
Easy maintenance
Compact footprint for installation close to primary machine on mezanine or floor.

Piovan Mould Dryers is ideal to prevent condensation in the mould area. They can operate in open or closed loop and for single or multiple machines.
Consistent dew point is assured by the PID control. Designed for fast start-up, do not need settings by operators.

They are ideally suited for:
• Mould enclosures of fast-cycle IMM’s
• Mould enclosures of blow moulding machines
• Mould enclosures and robot area of PET IMM’s

SEGHERS SMC 220 L thermal stripping system
Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters.
The combustion chamber is heated to approximately 420 degrees.
The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber.
Perfect cleaning for a cycle time of 90 to 150 min.
Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm
Dimensions of the basket: diameter 210 mm and length: 260 mm

x-travel: 30000 mm
y-travel: 3600 mm
z-travel: 1900 mm
Control: Heidenhain
Type: TNC 530 i
Milling head - pivoting: CNC
Speed: 4000 rpm
Cone mount: DIN 69871+AD mm
Spindle motor: 46 kW
Feed: 10000mm/min
Rapid traverse: 25000 mm/min
Chip conveyor: 2 pcs.
Panel field: 30000x3000 mm
Total power requirement: 85 kW
Machine weight approx.: t
Space requirement approx.: m

Frampton FR1-3 Flash roaster, Stainless flash roaster, used when pre cooked meats need to have a roast finish, allows products such as hams to be roasted in under 3mins and still cool enough to be packed, ideal for meats, fish, veg and more, belt dimensions 2100mm x 140mm, variable speed, adjustable temp control, mobile, 3Ph

Length: . mm
Height: . mm
Total power requirement: . kW
Machine weight approx.: . t
Space requirement approx.: . m

Cutting diameter: 150 mm
Saw blade length: . mm
Hub: . mm
Saw band length: . mm
Table height: . mm
Total power requirement: 0.5 kW
Machine weight approx.: . t
Space requirement approx.: . m

Spindle passage: 12 mm
Controller: Fanuc
Type: LB 2
Bar Feeder: FMB
Total power requirement: kW
Machine weight approx.: 1.4 t
Space requirement approx.: m

Diameter: mm
Cutting (count): 0
Weight: kg
Groove width: . mm
x-path: . mm
y-path: . mm
Total power requirement: . kW
Machine weight approx.: .. t
Space requirement approx.: . m

Length: 3100 mm
Width: 90 mm
Height: 25 mm