8
Metal working and machine toolsPressesPress brakes
ATLANTIC HPA 30-135 / Guter Zustand unter Strom-Druckkraft 135 Tonnen-Abkantlänge 3050mm-Durchgang zwischen den Ständern 2550mm-Komplette Oberwange/Werkzeuge u. separate Segmente in verschiedenen Längen-Zwei Matritzen-Motorische Höhenverstellung-Hinteranschlag manuell-Frontauflage 2x-Fußschalter / Handschalter-unter Strom vorführbereitGxb82NmAbmaße:LxBxH 4x1,8x2,4Meter / Gewicht ca. 8,5 tonnen
ATLANTIC HPA 30-135 / Guter Zustand unter Strom
-Druckkraft 135 Tonnen
-Abkantlänge 3050mm
-Durchgang zwischen den Ständern 2550mm
-Komplette Oberwange/Werkzeuge u. separate Segmente in verschiedenen Längen
-Zwei Matritzen
-Motorische Höhenverstellung
-Hinteranschlag manuell
-Frontauflage 2x
-Fußschalter / Handschalter
-unter Strom vorführbereit
Gxb82Nm
Abmaße:
LxBxH 4x1,8x2,4Meter / Gewicht ca. 8,5 tonnen
-Druckkraft 135 Tonnen
-Abkantlänge 3050mm
-Durchgang zwischen den Ständern 2550mm
-Komplette Oberwange/Werkzeuge u. separate Segmente in verschiedenen Längen
-Zwei Matritzen
-Motorische Höhenverstellung
-Hinteranschlag manuell
-Frontauflage 2x
-Fußschalter / Handschalter
-unter Strom vorführbereit
Gxb82Nm
Abmaße:
LxBxH 4x1,8x2,4Meter / Gewicht ca. 8,5 tonnen
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 55 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg
Punching power: 55 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 165 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
Punching power: 165 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 45 ton
Throat depth: 175 mm
Number of stations: 4
Max. diameter at sheet thickness (mild steel): 27 x 12 mm
Stroke: 15 mm
Strokes: 16 1/min
Flat steel: 300x10 / 200x13 mm
Angle steel: 80x80x8 mm
Notcher: 7 mm
Motor: 2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Punching power: 45 ton
Throat depth: 175 mm
Number of stations: 4
Max. diameter at sheet thickness (mild steel): 27 x 12 mm
Stroke: 15 mm
Strokes: 16 1/min
Flat steel: 300x10 / 200x13 mm
Angle steel: 80x80x8 mm
Notcher: 7 mm
Motor: 2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Throat depth: 175 mm
Number of stations: 4
Max. diameter at sheet thickness (mild steel): 27 x 12 mm
Stroke: 15 mm
Strokes: 16 1/min
Flat steel: 300x10 / 200x13 mm
Angle steel: 80x80x8 mm
Notcher: 7 mm
Motor: 2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
1
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 55 ton
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 9 kW
Length: 1930 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1885 kg
Punching power: 55 ton
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 9 kW
Length: 1930 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1885 kg
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 9 kW
Length: 1930 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1885 kg
6
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 35 ton
Throat depth: 60 mm
Max. hole diameter: 27 mm
Max. oblong hole: 25x18 mm
Punching time: 5 s
Max. sheet thickness - mild steel: 13 mm
Working pressure: 700 bar
Length: 379 mm
Width: 148 mm
Height: 335 mm
Weight: 20 kg
Punching power: 35 ton
Throat depth: 60 mm
Max. hole diameter: 27 mm
Max. oblong hole: 25x18 mm
Punching time: 5 s
Max. sheet thickness - mild steel: 13 mm
Working pressure: 700 bar
Length: 379 mm
Width: 148 mm
Height: 335 mm
Weight: 20 kg
Throat depth: 60 mm
Max. hole diameter: 27 mm
Max. oblong hole: 25x18 mm
Punching time: 5 s
Max. sheet thickness - mild steel: 13 mm
Working pressure: 700 bar
Length: 379 mm
Width: 148 mm
Height: 335 mm
Weight: 20 kg
11
Metal working and machine toolsSheet metal working machinesPress brakes
Pressure: 225 t
Bending length: 3600 mm
Stand width: 3100 mm
Control: CNC
Type: M9101 Controller
Total power requirement: kW
Machine weight approx.: 13 t
Space requirement approx.: m
Pressure: 225 t
Bending length: 3600 mm
Stand width: 3100 mm
Control: CNC
Type: M9101 Controller
Total power requirement: kW
Machine weight approx.: 13 t
Space requirement approx.: m
Bending length: 3600 mm
Stand width: 3100 mm
Control: CNC
Type: M9101 Controller
Total power requirement: kW
Machine weight approx.: 13 t
Space requirement approx.: m
3
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 55 ton
Throat depth: 500 mm
Max. diameter at sheet thickness (mild steel): 40 x 10 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1550 mm
Width: 1200 mm
Height: 1950 mm
Weight: 1150 kg
Punching power: 55 ton
Throat depth: 500 mm
Max. diameter at sheet thickness (mild steel): 40 x 10 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1550 mm
Width: 1200 mm
Height: 1950 mm
Weight: 1150 kg
Throat depth: 500 mm
Max. diameter at sheet thickness (mild steel): 40 x 10 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1550 mm
Width: 1200 mm
Height: 1950 mm
Weight: 1150 kg
10
Construction machineryTelescopic loaders
Load capacity: 3.5 t
Lifting height: 7000mm
Weight: 7070 kg
Motor power: 77 kW
Permitted Total weight: 9.2T
All-wheel steering: 0
Tires: 400/80-24
Operating hours: 9250 h
Engine: Perkins Diesel
Load capacity: 3.5 t
Lifting height: 7000mm
Weight: 7070 kg
Motor power: 77 kW
Permitted Total weight: 9.2T
All-wheel steering: 0
Tires: 400/80-24
Operating hours: 9250 h
Engine: Perkins Diesel
Lifting height: 7000mm
Weight: 7070 kg
Motor power: 77 kW
Permitted Total weight: 9.2T
All-wheel steering: 0
Tires: 400/80-24
Operating hours: 9250 h
Engine: Perkins Diesel
3
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 55 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
Punching power: 55 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
3
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 85 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
Punching power: 85 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
2
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 85 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
Punching power: 85 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
7
Conveyor technologyCranes
Tragkraft: 5 tHub: . mmSpannweite: 18000 mmHöhe: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Tragkraft: 5 t
Hub: . mm
Spannweite: 18000 mm
Höhe: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Hub: . mm
Spannweite: 18000 mm
Höhe: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
2
Material handlingTransport equipment
GKS 5 ton Heavy duty jack, hydraulic lifting jack, 2 pieces
GKS Schwerlastheber V5
GKS-PERFEKT hydraulic lifting devices meet the highest quality standards. They have been tried and tested worldwide for decades, they are robust and particularly durable. Our lifting devices / machine jacks are 100% checked and tested before delivery. In this way we guarantee perfect functionality. The customer receives a
Practical device for universal use at any location, whether in the company, in the workshop, in the open or in production
GKS 5 ton Heavy duty jack, hydraulic lifting jack, 2 pieces
GKS Schwerlastheber V5
GKS-PERFEKT hydraulic lifting devices meet the highest quality standards. They have been tried and tested worldwide for decades, they are robust and particularly durable. Our lifting devices / machine jacks are 100% checked and tested before delivery. In this way we guarantee perfect functionality. The customer receives a
Practical device for universal use at any location, whether in the company, in the workshop, in the open or in production
GKS Schwerlastheber V5
GKS-PERFEKT hydraulic lifting devices meet the highest quality standards. They have been tried and tested worldwide for decades, they are robust and particularly durable. Our lifting devices / machine jacks are 100% checked and tested before delivery. In this way we guarantee perfect functionality. The customer receives a
Practical device for universal use at any location, whether in the company, in the workshop, in the open or in production