USED Injection moulding machine BILLION 200T
BILLION 200T Hercule
Advert data
Machine designation
USED Injection moulding machine BILLION 200T
Manufacturer
BILLION
Type
200T Hercule
Year of manufacture
1998
Condition
used
Location of the advert
227 Rue Champ Du Pommier - Alex, 01100 Groissiat, France
Description
Injection moulding machine BILLION 200T Hercule
Year: 1998
Model: H780/200
Screw diameter: 50mm
Injection volume: 422 cm3
Injection pressure: 1843 bars
L/D: 22.3
Max locking force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Between vertical and horizontal columns: 610mm x 610mm
Column diameter: 100 mm
Maximum ejection stroke: 150 mm
Dimensions: 6.10 x 1.90 x 2.35m
Weight: 9.5T
Year: 1998
Model: H780/200
Screw diameter: 50mm
Injection volume: 422 cm3
Injection pressure: 1843 bars
L/D: 22.3
Max locking force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Between vertical and horizontal columns: 610mm x 610mm
Column diameter: 100 mm
Maximum ejection stroke: 150 mm
Dimensions: 6.10 x 1.90 x 2.35m
Weight: 9.5T
These adverts may also interest you
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpeg "Show advert")
Injection molding machinesPlastic injection molding machines
Ref. no.: 18552
Hersteller: BOY
Year of construction: 1997
Clamping unit
Clamping force: 22 ton
Opening stroke: 200 mm
Distance between tie bars: 254 mm
Mould height min.: 200 mm
Mould height max.: 400 mm
Platen size (h x v): 425 x 400 mm
Injection unit
Screw diameter: 28 mm
Injection volume: 49 cm³
Shot weight: 44 g
Injection pressure: 1069 bar
Measurements and weight
Dimensions: 2.3 x 0.81 x 1.63 m
Machine weight: 760 kg
Ref. no.: 18552
Hersteller: BOY
Year of construction: 1997
Clamping unit
Clamping force: 22 ton
Opening stroke: 200 mm
Distance between tie bars: 254 mm
Mould height min.: 200 mm
Mould height max.: 400 mm
Platen size (h x v): 425 x 400 mm
Injection unit
Screw diameter: 28 mm
Injection volume: 49 cm³
Shot weight: 44 g
Injection pressure: 1069 bar
Measurements and weight
Dimensions: 2.3 x 0.81 x 1.63 m
Machine weight: 760 kg
Hersteller: BOY
Year of construction: 1997
Clamping unit
Clamping force: 22 ton
Opening stroke: 200 mm
Distance between tie bars: 254 mm
Mould height min.: 200 mm
Mould height max.: 400 mm
Platen size (h x v): 425 x 400 mm
Injection unit
Screw diameter: 28 mm
Injection volume: 49 cm³
Shot weight: 44 g
Injection pressure: 1069 bar
Measurements and weight
Dimensions: 2.3 x 0.81 x 1.63 m
Machine weight: 760 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 18542
Hersteller: ENGEL
Year of construction: 2017
Clamping unit
Clamping force: 110 ton
Opening stroke: 500 mm
Mould height min.: 300 mm
Opening width: 800 mm
Platen size (h x v): 740 x 680 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 251 cm³
Shot weight: 225 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,9 x 1,5 x 2,0 m
Machine weight: 7,4 kg
Additional information & extras
Core pull: 4 pcs
Air valve: 1 pcs
Robot
Producer: Sepro
Type: S5-15
Year: 2016
Weight: 430 kg
Ref. no.: 18542
Hersteller: ENGEL
Year of construction: 2017
Clamping unit
Clamping force: 110 ton
Opening stroke: 500 mm
Mould height min.: 300 mm
Opening width: 800 mm
Platen size (h x v): 740 x 680 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 251 cm³
Shot weight: 225 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,9 x 1,5 x 2,0 m
Machine weight: 7,4 kg
Additional information & extras
Core pull: 4 pcs
Air valve: 1 pcs
Robot
Producer: Sepro
Type: S5-15
Year: 2016
Weight: 430 kg
Hersteller: ENGEL
Year of construction: 2017
Clamping unit
Clamping force: 110 ton
Opening stroke: 500 mm
Mould height min.: 300 mm
Opening width: 800 mm
Platen size (h x v): 740 x 680 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 251 cm³
Shot weight: 225 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,9 x 1,5 x 2,0 m
Machine weight: 7,4 kg
Additional information & extras
Core pull: 4 pcs
Air valve: 1 pcs
Robot
Producer: Sepro
Type: S5-15
Year: 2016
Weight: 430 kg
_thumb.jpg "Show advert")
Injection molding machinesPlastic injection molding machines
Ref. no.: 18496
Hersteller: ARBURG
Year of construction: 2011
Clamping unit
Clamping force: 200 ton
Opening stroke: 520 mm
Distance between tie bars: 570 X570 mm
Mould height min.: 300 mm
Opening width: 950 mm
Platen size (h x v): 795 X795 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 291 g
Injection pressure: 2470 bar
Measurements and weight
Dimensions: 5,6 X 1,8 X 2,3 m
Machine weight: 7450 kg
Ref. no.: 18496
Hersteller: ARBURG
Year of construction: 2011
Clamping unit
Clamping force: 200 ton
Opening stroke: 520 mm
Distance between tie bars: 570 X570 mm
Mould height min.: 300 mm
Opening width: 950 mm
Platen size (h x v): 795 X795 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 291 g
Injection pressure: 2470 bar
Measurements and weight
Dimensions: 5,6 X 1,8 X 2,3 m
Machine weight: 7450 kg
Hersteller: ARBURG
Year of construction: 2011
Clamping unit
Clamping force: 200 ton
Opening stroke: 520 mm
Distance between tie bars: 570 X570 mm
Mould height min.: 300 mm
Opening width: 950 mm
Platen size (h x v): 795 X795 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 291 g
Injection pressure: 2470 bar
Measurements and weight
Dimensions: 5,6 X 1,8 X 2,3 m
Machine weight: 7450 kg
_thumb.jpg "Show advert")
Injection molding machinesPlastic injection molding machines
Ref. no.: 18482
Hersteller: KRAUSS MAFFEI
Year of construction: 2010
Clamping unit
Clamping force: 300 ton
Opening stroke: 820 mm
Distance between tie bars: 810 X 720 mm
Mould height min.: 480 mm
Opening width: 1300 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 792 cm³
Shot weight: 720 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 6,7 X 2,1 X 2,4 m
Machine weight: 16400 kg
Additional information & extras
Accumulator: 1 pcs
Robot
Producer: Krauss Maffei
Type: KM LRX S 250
Year: 2010
Ref. no.: 18482
Hersteller: KRAUSS MAFFEI
Year of construction: 2010
Clamping unit
Clamping force: 300 ton
Opening stroke: 820 mm
Distance between tie bars: 810 X 720 mm
Mould height min.: 480 mm
Opening width: 1300 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 792 cm³
Shot weight: 720 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 6,7 X 2,1 X 2,4 m
Machine weight: 16400 kg
Additional information & extras
Accumulator: 1 pcs
Robot
Producer: Krauss Maffei
Type: KM LRX S 250
Year: 2010
Hersteller: KRAUSS MAFFEI
Year of construction: 2010
Clamping unit
Clamping force: 300 ton
Opening stroke: 820 mm
Distance between tie bars: 810 X 720 mm
Mould height min.: 480 mm
Opening width: 1300 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 792 cm³
Shot weight: 720 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 6,7 X 2,1 X 2,4 m
Machine weight: 16400 kg
Additional information & extras
Accumulator: 1 pcs
Robot
Producer: Krauss Maffei
Type: KM LRX S 250
Year: 2010
Injection molding machinesPlastic injection molding machines
Ref. no.: 18481
Hersteller: ARBURG
Year of construction: 2004
Clamping unit
Clamping force: 60 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 200 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 45 cm³
Shot weight: 40 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 X 1,5 X 1,7 m
Machine weight: 2330 kg
Ref. no.: 18481
Hersteller: ARBURG
Year of construction: 2004
Clamping unit
Clamping force: 60 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 200 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 45 cm³
Shot weight: 40 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 X 1,5 X 1,7 m
Machine weight: 2330 kg
Hersteller: ARBURG
Year of construction: 2004
Clamping unit
Clamping force: 60 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 200 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 45 cm³
Shot weight: 40 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 X 1,5 X 1,7 m
Machine weight: 2330 kg
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
Injection molding machinesPlastic injection molding machines
Ref. no.: 18333
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar
Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14300 kg
Ref. no.: 18333
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar
Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14300 kg
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar
Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14300 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 18331
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg
Ref. no.: 18331
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 18330
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar
Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg
Ref. no.: 18330
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar
Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar
Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar
Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg
Additional information & extras
Core pull: 1 pcs
Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar
Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg
Additional information & extras
Core pull: 1 pcs
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar
Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg
Additional information & extras
Core pull: 1 pcs
Injection molding machinesPlastic injection molding machines
Ref. no.: 18383
Hersteller: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 420 ton
Opening stroke: 770 mm
Distance between tie bars: 820 X 820 mm
Mould height min.: 380 mm
Mould height max.: 825 mm
Platen size (h x v): 1200 X 1100 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 890 cm³
Shot weight: 810 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 8,2 X 2,2 X 2,4 m
Machine weight: 22300 kg
Additional information & extras
Core pull: 4 pcs
Air valve: 7 pcs
Hot runner systems: 8 pcs.
Ref. no.: 18383
Hersteller: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 420 ton
Opening stroke: 770 mm
Distance between tie bars: 820 X 820 mm
Mould height min.: 380 mm
Mould height max.: 825 mm
Platen size (h x v): 1200 X 1100 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 890 cm³
Shot weight: 810 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 8,2 X 2,2 X 2,4 m
Machine weight: 22300 kg
Additional information & extras
Core pull: 4 pcs
Air valve: 7 pcs
Hot runner systems: 8 pcs.
Hersteller: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 420 ton
Opening stroke: 770 mm
Distance between tie bars: 820 X 820 mm
Mould height min.: 380 mm
Mould height max.: 825 mm
Platen size (h x v): 1200 X 1100 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 890 cm³
Shot weight: 810 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 8,2 X 2,2 X 2,4 m
Machine weight: 22300 kg
Additional information & extras
Core pull: 4 pcs
Air valve: 7 pcs
Hot runner systems: 8 pcs.
Injection molding machinesPlastic injection molding machines
Ref. no.: 18368
Hersteller: ARBURG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 300 mm
Mould height max.: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 75 g
Injection pressure: 2200 bar
Measurements and weight
Dimensions: 3,25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Ref. no.: 18368
Hersteller: ARBURG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 300 mm
Mould height max.: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 75 g
Injection pressure: 2200 bar
Measurements and weight
Dimensions: 3,25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Hersteller: ARBURG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 300 mm
Mould height max.: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 75 g
Injection pressure: 2200 bar
Measurements and weight
Dimensions: 3,25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar
Measurements and weight
Machine weight: 13500 kg
Robot
Producer: Wittman
Type: W743
Year: 2009
Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar
Measurements and weight
Machine weight: 13500 kg
Robot
Producer: Wittman
Type: W743
Year: 2009
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar
Measurements and weight
Machine weight: 13500 kg
Robot
Producer: Wittman
Type: W743
Year: 2009
Injection molding machinesPlastic injection molding machines
Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm
Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm
2 hydraulic core pull
Dimensions:
4960 x 3656 x 3360mm
Weight: 14500KG
Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm
Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm
2 hydraulic core pull
Dimensions:
4960 x 3656 x 3360mm
Weight: 14500KG
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm
Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm
2 hydraulic core pull
Dimensions:
4960 x 3656 x 3360mm
Weight: 14500KG
Injection molding machinesPlastic injection molding machines
Vertical injection moulding machine REP super Sancar
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm
Vertical injection moulding machine REP super Sancar
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm
Injection molding machinesPlastic injection molding machines
Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot
Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot
Injection molding machinesPlastic injection molding machines
Billion 200 T injection molding machine
Model : H780 / 200
Year : 1998
Screw diameter: 50mm
Injectable volume : 422 cm3
Injection pressure: 1843 bars
L / D: 22.3
Clamping force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Distance between tie bars (h x v): 610mm x 610mm
Ejection stroke: 150mm
Dimension : 6,1 m x 1,9m x 2,35m
Weight : 9.5 t
Billion 200 T injection molding machine
Model : H780 / 200
Year : 1998
Screw diameter: 50mm
Injectable volume : 422 cm3
Injection pressure: 1843 bars
L / D: 22.3
Clamping force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Distance between tie bars (h x v): 610mm x 610mm
Ejection stroke: 150mm
Dimension : 6,1 m x 1,9m x 2,35m
Weight : 9.5 t
Model : H780 / 200
Year : 1998
Screw diameter: 50mm
Injectable volume : 422 cm3
Injection pressure: 1843 bars
L / D: 22.3
Clamping force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Distance between tie bars (h x v): 610mm x 610mm
Ejection stroke: 150mm
Dimension : 6,1 m x 1,9m x 2,35m
Weight : 9.5 t
Injection molding machinesPlastic injection molding machines
Injection moulding machine SANDRETTO serie 9
Clamping force : 230 T
Year : 2001
Screw diameter is 50 mm.
Volume injectable : 475 cm3
Platen dimensions : 860 x 860 mm
Distance between tie bar is : 570 x 570 mm
Dimension are : 6,67 m x 2,22 m x 1,82 m
Weight of the machine : 10 200 KG
Injection moulding machine SANDRETTO serie 9
Clamping force : 230 T
Year : 2001
Screw diameter is 50 mm.
Volume injectable : 475 cm3
Platen dimensions : 860 x 860 mm
Distance between tie bar is : 570 x 570 mm
Dimension are : 6,67 m x 2,22 m x 1,82 m
Weight of the machine : 10 200 KG
Clamping force : 230 T
Year : 2001
Screw diameter is 50 mm.
Volume injectable : 475 cm3
Platen dimensions : 860 x 860 mm
Distance between tie bar is : 570 x 570 mm
Dimension are : 6,67 m x 2,22 m x 1,82 m
Weight of the machine : 10 200 KG
Injection molding machinesPlastic injection molding machines
Billion 140 T HERCULE injection molding machine
Model : H780 / 140
Year : 2000
Screw diameter: 45mm
Injectable volume : 220 cm3
Injection pressure: 2100 bars
Clamping force: 1400 KN
Platen dimension : 650 x 650 mm
Distance between tie bar : 430 x 430 mm
Platen dimensions (h x v): 610mm x 610mm
Dimension : 5,1 m x 1,8 m x 2,20m
Weight : 7 T
Billion 140 T HERCULE injection molding machine
Model : H780 / 140
Year : 2000
Screw diameter: 45mm
Injectable volume : 220 cm3
Injection pressure: 2100 bars
Clamping force: 1400 KN
Platen dimension : 650 x 650 mm
Distance between tie bar : 430 x 430 mm
Platen dimensions (h x v): 610mm x 610mm
Dimension : 5,1 m x 1,8 m x 2,20m
Weight : 7 T
Model : H780 / 140
Year : 2000
Screw diameter: 45mm
Injectable volume : 220 cm3
Injection pressure: 2100 bars
Clamping force: 1400 KN
Platen dimension : 650 x 650 mm
Distance between tie bar : 430 x 430 mm
Platen dimensions (h x v): 610mm x 610mm
Dimension : 5,1 m x 1,8 m x 2,20m
Weight : 7 T
Injection molding machinesPlastic injection molding machines
SANDRETTO serie 8 790-200
Clamping force : 200 T
Distance between tie bar : 510 x 510 mm
Mould thickness min / max : 210 - 630 mm
Opening strocke : 550 mm
Injectable volume : 546 cm3
Presure on the plastic material max : 1450 bars
Screw diameter : 55 mm
SANDRETTO serie 8 790-200
Clamping force : 200 T
Distance between tie bar : 510 x 510 mm
Mould thickness min / max : 210 - 630 mm
Opening strocke : 550 mm
Injectable volume : 546 cm3
Presure on the plastic material max : 1450 bars
Screw diameter : 55 mm
Clamping force : 200 T
Distance between tie bar : 510 x 510 mm
Mould thickness min / max : 210 - 630 mm
Opening strocke : 550 mm
Injectable volume : 546 cm3
Presure on the plastic material max : 1450 bars
Screw diameter : 55 mm
Injection molding machinesPlastic injection molding machines
Injection moulding machine in good condition BM BIRAGHI sintesi 150
Screw diameter : 50 mm
Clamping force : 150 T
Distance between tie bar : 460 x 460 mm
470 mm opening stroke
150 mm min opening mould
Injection moulding machine in good condition BM BIRAGHI sintesi 150
Screw diameter : 50 mm
Clamping force : 150 T
Distance between tie bar : 460 x 460 mm
470 mm opening stroke
150 mm min opening mould
Screw diameter : 50 mm
Clamping force : 150 T
Distance between tie bar : 460 x 460 mm
470 mm opening stroke
150 mm min opening mould
Injection molding machinesPlastic injection molding machines
Injection moulding machine KRAUSS MAFFEI KM 65-1350
Clamping force : 65 T
Year 1996
Screw diameter : 30 mm
With EUROMAP 12
Injection moulding machine KRAUSS MAFFEI KM 65-1350
Clamping force : 65 T
Year 1996
Screw diameter : 30 mm
With EUROMAP 12
Clamping force : 65 T
Year 1996
Screw diameter : 30 mm
With EUROMAP 12
_thumb.jpg "Show advert")
Injection molding machinesPlastic injection molding machines
INJECTION MOULDING MACHINE KRAUSS MAFFEI 500 H 3500 C1
Working hours : 51 850 hours
Clamping force : 500 T
Year : 2000
Screw diameter : 90 mm
Miximum injection volume : 1953 cm3
Injection pressure max : 1742 bars
Platen dimension : 1270 x 1200 mm
Distance between tie bar : 900 x 800 mm
Mould min thickness : 480 mm
Opening strocke max : 1170 mm
Distance max between platen : 1650 mm
Ejection stroke : 250 mm
Equipement :
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen
HMI / new control unit
New metering motor
Locking unit redone
Machine calibration done
New hydraulic hoses
INJECTION MOULDING MACHINE KRAUSS MAFFEI 500 H 3500 C1
Working hours : 51 850 hours
Clamping force : 500 T
Year : 2000
Screw diameter : 90 mm
Miximum injection volume : 1953 cm3
Injection pressure max : 1742 bars
Platen dimension : 1270 x 1200 mm
Distance between tie bar : 900 x 800 mm
Mould min thickness : 480 mm
Opening strocke max : 1170 mm
Distance max between platen : 1650 mm
Ejection stroke : 250 mm
Equipement :
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen
HMI / new control unit
New metering motor
Locking unit redone
Machine calibration done
New hydraulic hoses
Working hours : 51 850 hours
Clamping force : 500 T
Year : 2000
Screw diameter : 90 mm
Miximum injection volume : 1953 cm3
Injection pressure max : 1742 bars
Platen dimension : 1270 x 1200 mm
Distance between tie bar : 900 x 800 mm
Mould min thickness : 480 mm
Opening strocke max : 1170 mm
Distance max between platen : 1650 mm
Ejection stroke : 250 mm
Equipement :
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen
HMI / new control unit
New metering motor
Locking unit redone
Machine calibration done
New hydraulic hoses
Injection molding machinesPlastic injection molding machines
NEGRI BOSSI 480 T
Clamping Force: 480T
reference : 4800 H 3800
Screw diameter: 90 mm
L/D ratio: 20
Maximum material pressure: 1500 bar
Injection volume : 2160 cm3
Injection capacity: 2270 g
Injection speed: 500mm/s
Plastification: 105 g/s
Clearence between tie bars (H x V): 710 x 800
Platen dimensions (H x V): 1190 x 1150
Max mold thickness: 850mm
Minimum mold thickness: 200mm
Ejection stroke: 300mm
Air cores: 2
Hydraulic cores: 2
+ 1 Wittmann Robot
Working hours : 70 000 h
NEGRI BOSSI 480 T
Clamping Force: 480T
reference : 4800 H 3800
Screw diameter: 90 mm
L/D ratio: 20
Maximum material pressure: 1500 bar
Injection volume : 2160 cm3
Injection capacity: 2270 g
Injection speed: 500mm/s
Plastification: 105 g/s
Clearence between tie bars (H x V): 710 x 800
Platen dimensions (H x V): 1190 x 1150
Max mold thickness: 850mm
Minimum mold thickness: 200mm
Ejection stroke: 300mm
Air cores: 2
Hydraulic cores: 2
+ 1 Wittmann Robot
Working hours : 70 000 h
Clamping Force: 480T
reference : 4800 H 3800
Screw diameter: 90 mm
L/D ratio: 20
Maximum material pressure: 1500 bar
Injection volume : 2160 cm3
Injection capacity: 2270 g
Injection speed: 500mm/s
Plastification: 105 g/s
Clearence between tie bars (H x V): 710 x 800
Platen dimensions (H x V): 1190 x 1150
Max mold thickness: 850mm
Minimum mold thickness: 200mm
Ejection stroke: 300mm
Air cores: 2
Hydraulic cores: 2
+ 1 Wittmann Robot
Working hours : 70 000 h
Injection molding machinesPlastic injection molding machines
Sandretto injection moulding machine MEGA T 610 T
Reference : 4435 - 610
Command : SEF 100
year :1996
Working hours : 47 200 h
Screw diameter : 80 mm
Volume injectable : 2237 cm3
Injection pressure : 1960 bars
Distance between tie bar : 850 x 850 mm
Platen dimensions : 1260 x 1260 mm
Mould thickness : min : 300 – max : 1000 mm
Interface robot
2 core pull
2 air valve
Sandretto injection moulding machine MEGA T 610 T
Reference : 4435 - 610
Command : SEF 100
year :1996
Working hours : 47 200 h
Screw diameter : 80 mm
Volume injectable : 2237 cm3
Injection pressure : 1960 bars
Distance between tie bar : 850 x 850 mm
Platen dimensions : 1260 x 1260 mm
Mould thickness : min : 300 – max : 1000 mm
Interface robot
2 core pull
2 air valve
Reference : 4435 - 610
Command : SEF 100
year :1996
Working hours : 47 200 h
Screw diameter : 80 mm
Volume injectable : 2237 cm3
Injection pressure : 1960 bars
Distance between tie bar : 850 x 850 mm
Platen dimensions : 1260 x 1260 mm
Mould thickness : min : 300 – max : 1000 mm
Interface robot
2 core pull
2 air valve
Injection molding machinesPlastic injection molding machines
Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 18138
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Ref. no.: 18138
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 17514
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
Ref. no.: 17514
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
Injection molding machinesPlastic injection molding machines
Ref. no.: 17507
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Ref. no.: 17507
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Injection molding machinesPlastic injection molding machines
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Injection molding machinesPlastic injection molding machines
KRAUSS MAFFEI KM CX 420-4300
Number of operating hours: 37,589 hours
Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN
Oil tank capacity: 1075 L
KRAUSS MAFFEI KM CX 420-4300
Number of operating hours: 37,589 hours
Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN
Oil tank capacity: 1075 L
Number of operating hours: 37,589 hours
Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN
Oil tank capacity: 1075 L
Injection molding machinesPlastic injection molding machines
BILLION 50 T PROXIMA press
Year: 2001
Model: H200/50
Screw diameter: 30 mm
Injection volume: 106 cm3
Injection pressure: 1910 bar
Maximum locking force: 500 KN
Dimensions of the trays: 580 mm x 520 mm
Min/max mold thickness: 180/360 mm
Dimensions: 3.52 x 1.17 x 1.72m
Weight: 3.5T
BILLION 50 T PROXIMA press
Year: 2001
Model: H200/50
Screw diameter: 30 mm
Injection volume: 106 cm3
Injection pressure: 1910 bar
Maximum locking force: 500 KN
Dimensions of the trays: 580 mm x 520 mm
Min/max mold thickness: 180/360 mm
Dimensions: 3.52 x 1.17 x 1.72m
Weight: 3.5T
Year: 2001
Model: H200/50
Screw diameter: 30 mm
Injection volume: 106 cm3
Injection pressure: 1910 bar
Maximum locking force: 500 KN
Dimensions of the trays: 580 mm x 520 mm
Min/max mold thickness: 180/360 mm
Dimensions: 3.52 x 1.17 x 1.72m
Weight: 3.5T
Injection molding machinesPlastic injection molding machines
BILLION HERCULES H2000/320 - 320T
Year August 1999
Screw diameter: 80 mm
Injection volume: 1433 cm3
Passage between columns: 735 x 735 mm
Mold thickness: 330 to 680 mm
Weight: 16.5T
Dimensions: 7.88 x 2.02 x 2.60m
Sold with a Robot SEPRO 4030 stroke of 5500 mm visual 1 / year 2007
BILLION HERCULES H2000/320 - 320T
Year August 1999
Screw diameter: 80 mm
Injection volume: 1433 cm3
Passage between columns: 735 x 735 mm
Mold thickness: 330 to 680 mm
Weight: 16.5T
Dimensions: 7.88 x 2.02 x 2.60m
Sold with a Robot SEPRO 4030 stroke of 5500 mm visual 1 / year 2007
Year August 1999
Screw diameter: 80 mm
Injection volume: 1433 cm3
Passage between columns: 735 x 735 mm
Mold thickness: 330 to 680 mm
Weight: 16.5T
Dimensions: 7.88 x 2.02 x 2.60m
Sold with a Robot SEPRO 4030 stroke of 5500 mm visual 1 / year 2007
Injection molding machinesPlastic injection molding machines
Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg
Injection molding machinesPlastic injection molding machines
USED Engel Duo 940M/940H/650 combi M
Year: 2010
USED Engel Duo 940M/940H/650 combi M
Year: 2010
Year: 2010
Injection molding machinesPlastic injection molding machines
BILLION 200 TONS H1300/200 Injection molding machine
For specifications see attached PDF
BILLION 200 TONS H1300/200 Injection molding machine
For specifications see attached PDF
For specifications see attached PDF
1
Injection molding machinesPlastic injection molding machines
ARBURG 130 TONS.
- Year 2001
- Type : 470 C - 1300 - 675
- Screw diameter : 40 mm
- 1 corepuller
- Interface robot
- In between columns : 470 x 470 mm
ARBURG 130 TONS.
- Year 2001
- Type : 470 C - 1300 - 675
- Screw diameter : 40 mm
- 1 corepuller
- Interface robot
- In between columns : 470 x 470 mm
- Year 2001
- Type : 470 C - 1300 - 675
- Screw diameter : 40 mm
- 1 corepuller
- Interface robot
- In between columns : 470 x 470 mm
Injection molding machinesPlastic injection molding machines
SUMITOMO ELECTRICAL 75 TONS
- Year : 2000
- Type : SE75S
- In between columns : 360 x 360 mm
- Opening stroke : 300 mm
- Screw diameter :25 mm
- Injection volume : 56 cm3
SUMITOMO ELECTRICAL 75 TONS
- Year : 2000
- Type : SE75S
- In between columns : 360 x 360 mm
- Opening stroke : 300 mm
- Screw diameter :25 mm
- Injection volume : 56 cm3
- Year : 2000
- Type : SE75S
- In between columns : 360 x 360 mm
- Opening stroke : 300 mm
- Screw diameter :25 mm
- Injection volume : 56 cm3
Injection molding machinesPlastic injection molding machines
KRAUSSMAFFEI 200 T -
- Type : KM700-200
- Year : 1998
- In between columns : 560 x 560 mm
- Screw diameter : 45 mm
- Ijnection volume : 305 cm3
- 3 core
- Interface robot
- Equiped with a peak cons
- 1 accumulator
- 8 heating zones
KRAUSSMAFFEI 200 T -
- Type : KM700-200
- Year : 1998
- In between columns : 560 x 560 mm
- Screw diameter : 45 mm
- Ijnection volume : 305 cm3
- 3 core
- Interface robot
- Equiped with a peak cons
- 1 accumulator
- 8 heating zones
- Type : KM700-200
- Year : 1998
- In between columns : 560 x 560 mm
- Screw diameter : 45 mm
- Ijnection volume : 305 cm3
- 3 core
- Interface robot
- Equiped with a peak cons
- 1 accumulator
- 8 heating zones
Injection molding machinesPlastic injection molding machines
NEGRI-BOSSI 370 TONS
Type: 3700H-2200
Specifications see attached PDF
NEGRI-BOSSI 370 TONS
Type: 3700H-2200
Specifications see attached PDF
Type: 3700H-2200
Specifications see attached PDF
Injection molding machinesPlastic injection molding machines
USED NESTAL 150 TONS
N580/150-MP
See attached PDF
USED NESTAL 150 TONS
N580/150-MP
See attached PDF
N580/150-MP
See attached PDF
Injection molding machinesPlastic injection molding machines
BILLION Bi material H6860/2000-550 TONS
Working hours: 32000
Very good condition
INJECTION 1: H6860
Screw diameter: 105 mm
Ration L/D - 20
Injectable volume: Cm3 4546
Injection pressure: 1509 BAR
Max injection ration: 2160 Cm3/s
Max speed screw rotation Min-1 150
INJECTION 2: H200
Screw diameter: 70mm
ration L/D - 23,1
Injectable volume: 1097 Cm3
Injection pressure :1822 BAR
Max injection ration: 845 Cm3/s
Max speed screw rotation Min-1 200
CLAMPING
Clamping force: 550 Tons
MinimumThickness mould: 300 mm
Maximun Thickness mould: 1000 mm
Opening stroke: 1100 mm
Plates dimensions H x V: 1350 x 1350 mm
In between columns H x V : 930 x 930 mm
Maximun distance between pltes : 2100 mm
Weight
Total weight kg: 26500
Clamping weight kg:15000
Injection weight kg: 14800
BILLION Bi material H6860/2000-550 TONS
Working hours: 32000
Very good condition
INJECTION 1: H6860
Screw diameter: 105 mm
Ration L/D - 20
Injectable volume: Cm3 4546
Injection pressure: 1509 BAR
Max injection ration: 2160 Cm3/s
Max speed screw rotation Min-1 150
INJECTION 2: H200
Screw diameter: 70mm
ration L/D - 23,1
Injectable volume: 1097 Cm3
Injection pressure :1822 BAR
Max injection ration: 845 Cm3/s
Max speed screw rotation Min-1 200
CLAMPING
Clamping force: 550 Tons
MinimumThickness mould: 300 mm
Maximun Thickness mould: 1000 mm
Opening stroke: 1100 mm
Plates dimensions H x V: 1350 x 1350 mm
In between columns H x V : 930 x 930 mm
Maximun distance between pltes : 2100 mm
Weight
Total weight kg: 26500
Clamping weight kg:15000
Injection weight kg: 14800
Working hours: 32000
Very good condition
INJECTION 1: H6860
Screw diameter: 105 mm
Ration L/D - 20
Injectable volume: Cm3 4546
Injection pressure: 1509 BAR
Max injection ration: 2160 Cm3/s
Max speed screw rotation Min-1 150
INJECTION 2: H200
Screw diameter: 70mm
ration L/D - 23,1
Injectable volume: 1097 Cm3
Injection pressure :1822 BAR
Max injection ration: 845 Cm3/s
Max speed screw rotation Min-1 200
CLAMPING
Clamping force: 550 Tons
MinimumThickness mould: 300 mm
Maximun Thickness mould: 1000 mm
Opening stroke: 1100 mm
Plates dimensions H x V: 1350 x 1350 mm
In between columns H x V : 930 x 930 mm
Maximun distance between pltes : 2100 mm
Weight
Total weight kg: 26500
Clamping weight kg:15000
Injection weight kg: 14800
Injection molding machinesPlastic injection molding machines
In working conditions
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
In working conditions
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
Working hours: 12.022
Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN
Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN
Injection molding machinesPlastic injection molding machines
GENERAL INFORMATIONS
Dimensions: 6200 x 2150 x Ht.2400 mm
Weight: 13500 kg
Engine power: 75 kw
- INJECTION UNIT
Plasticising capacity: (PS) 682 gr
Ration length diameter: 23,7
Injection pressure: 2000 bar
Scew diametre: 60 mm
- CLOSING UNIT
Plates dimensions: 995 x 1050 mm
In between columns: 630 x 630 mm
Clamping force: 280 TONS
COMMENTS
workings hours: 37000
Interface robot - 1 core
GENERAL INFORMATIONS
Dimensions: 6200 x 2150 x Ht.2400 mm
Weight: 13500 kg
Engine power: 75 kw
- INJECTION UNIT
Plasticising capacity: (PS) 682 gr
Ration length diameter: 23,7
Injection pressure: 2000 bar
Scew diametre: 60 mm
- CLOSING UNIT
Plates dimensions: 995 x 1050 mm
In between columns: 630 x 630 mm
Clamping force: 280 TONS
COMMENTS
workings hours: 37000
Interface robot - 1 core
Dimensions: 6200 x 2150 x Ht.2400 mm
Weight: 13500 kg
Engine power: 75 kw
- INJECTION UNIT
Plasticising capacity: (PS) 682 gr
Ration length diameter: 23,7
Injection pressure: 2000 bar
Scew diametre: 60 mm
- CLOSING UNIT
Plates dimensions: 995 x 1050 mm
In between columns: 630 x 630 mm
Clamping force: 280 TONS
COMMENTS
workings hours: 37000
Interface robot - 1 core
_thumb.jpg "Show advert")
Injection molding machinesPlastic injection molding machines
-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808
-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:
Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm
COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808
