Please wait...

2
Metal working and machine toolsSawingBelt saws

Semiautomatic band saw HESSE by BEKAMAK BMSY 360 DGH ECO

HESSE by BEKAMAK BMSY 360 DGH ECO
Saw frame: Pivot frame Band dimensions: 4800x34x1,1 mm Band speed continous: 15 - 120 m/min Cutting capacity 0° round: 360 mm Cutting capacity 0° square: 360 mm Cutting capacity 0° flat: 510x360 mm Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 390 x 360 mm Cutting capacity 60°: rund 250 mm, quadrat 220 mm, rechteck 220 x 360 mm Cutting capacity - 60°: rund 280 mm, quadrat 260 mm, rechteck 260 x 360 mm Working height: 860 mm Hydraulic motor: 0.37 kW Motor: 3 kW Coolant pump motor: 0.12 kW Length: 2650 mm Width: 1210 mm Height: 1870 mm Weight: 1450 kg
Saw frame: Pivot frame
Band dimensions: 4800x34x1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 360 mm
Cutting capacity 0° square: 360 mm
Cutting capacity 0° flat: 510x360 mm
Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 390 x 360 mm
Cutting capacity 60°: rund 250 mm, quadrat 220 mm, rechteck 220 x 360 mm
Cutting capacity - 60°: rund 280 mm, quadrat 260 mm, rechteck 260 x 360 mm
Working height: 860 mm
Hydraulic motor: 0.37 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2650 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1450 kg
4
Metal working and machine toolsPressesEccentric presses

C-frame eccentric press HESSE by FRESAN FP 60 P

HESSE by FRESAN FP 60 P
pressing capacity: 60 to Tonnage rating point: 3.5 mm Table length: 500 mm Table width: 700 mm Hole in table: 190 mm Stroke: 1 - 100 mm Strokes: 65 1/min Ram guides: 4 Ram adjustment: 70 mm Ram hole: 45 mm Throat depth: 260 mm Daylight: 340 mm Motor: 5.5 kW Length: 1250 mm Width: 1350 mm Height: 2400 mm Weight: 3500 kg
pressing capacity: 60 to
Tonnage rating point: 3.5 mm
Table length: 500 mm
Table width: 700 mm
Hole in table: 190 mm
Stroke: 1 - 100 mm
Strokes: 65 1/min
Ram guides: 4
Ram adjustment: 70 mm
Ram hole: 45 mm
Throat depth: 260 mm
Daylight: 340 mm
Motor: 5.5 kW
Length: 1250 mm
Width: 1350 mm
Height: 2400 mm
Weight: 3500 kg
1
Metal working and machine toolsSheet metal working machinesFeed straighteners

Decoiler HESSE by COILTECH CMC P3 1250 400 M D1300

HESSE by COILTECH CMC P3 1250 400 M D1300
Coil weight: 1250 kg Coil outer diameter: 1300 mm Min. coil inner diameter: 450 - 550 mm Max. coil width: 400 mm Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. coil width for version with pneumatic downholder: 80 mm
6
Metal working and machine toolsSheet metal working machinesPlate shears

Motorized plate shear UMS Comfort 1506

UMS Comfort 1506
Cutting length: 1550 mm Max. thickness - mild steel: 6 mm Strokes: 30 1/min Cutting angle: 2.3 ° Back gauge: 750 mm Motor power: 7 kW Table height: 800 mm Table width: 530 mm Table length: 1855 mm Length: 2220 mm Width: 1630 mm Height: 1230 mm Weight: 2900 kg
Cutting length: 1550 mm
Max. thickness - mild steel: 6 mm
Strokes: 30 1/min
Cutting angle: 2.3 °
Back gauge: 750 mm
Motor power: 7 kW
Table height: 800 mm
Table width: 530 mm
Table length: 1855 mm
Length: 2220 mm
Width: 1630 mm
Height: 1230 mm
Weight: 2900 kg
6
Metal working and machine toolsSheet metal working machinesPlate shears

Motorized plate shear UMS Comfort 2006

UMS Comfort 2006
Cutting length: 2050 mm Max. thickness - mild steel: 6 mm Strokes: 30 1/min Cutting angle: 2.3 ° Back gauge: 750 mm Motor power: 7.5 kW Table height: 800 mm Table width: 530 mm Table length: 2355 mm Length: 2720 mm Width: 1630 mm Height: 1230 mm Weight: 3200 kg
Cutting length: 2050 mm
Max. thickness - mild steel: 6 mm
Strokes: 30 1/min
Cutting angle: 2.3 °
Back gauge: 750 mm
Motor power: 7.5 kW
Table height: 800 mm
Table width: 530 mm
Table length: 2355 mm
Length: 2720 mm
Width: 1630 mm
Height: 1230 mm
Weight: 3200 kg
2
Metal working and machine toolsSawingBelt saws

Conventional band saw BIANCO 370 M SA

BIANCO 370 M SA
Saw frame: Pivot frame Band dimensions: 3120x27x0,9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 280 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 370x140 mm Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm Working height: 830 mm Length: 1550 mm Width: 1400 mm Height: 1900 mm Weight: 353 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 370x140 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1900 mm
Weight: 353 kg
4
Metal working and machine toolsSawingBelt saws

Fully automatic band saw BIANCO 330 AE PLC

BIANCO 330 AE PLC
Saw frame: Pivot frame Band dimensions: 3010x27x0,9 mm Band speed: 35/70 (PLC) m/min Band speed continous: 20-100 (CNC/Touch) m/min Cutting capacity 0° round: 260 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 330x120 mm Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm Min. rest piece length: 220 mm Working height: 835 mm Hydraulic motor: 0.37 kW Coolant pump motor: 0.12 kW Length: 2800 mm Width: 2050 mm Height: 1900 mm Weight: 1090 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
8
Metal working and machine toolsSawingBelt saws

Fully automatic band saw HESSE by BEKAMAK BMSO 440 CGH NC

HESSE by BEKAMAK BMSO 440 CGH NC
Saw frame: Double column Band dimensions: 5400x41x1,3 mm Band speed continous: 20-100 m/min Cutting capacity 0° round: 440 mm Cutting capacity 0° square: 440 mm Cutting capacity 0° flat: 610x425 mm Cutting capacity 30°: rund 440 mm, quadrat 440 mm, rechteck 570 x 440 mm Cutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mm Cutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 260 x 425 mm Working height: 735 mm Hydraulic motor: 1.1 kW Motor: 4 kW Coolant pump motor: 0.12 kW Length: 2850 mm Width: 2350 mm Height: 2000 mm Weight: 3600 kg
Saw frame: Double column
Band dimensions: 5400x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 610x425 mm
Cutting capacity 30°: rund 440 mm, quadrat 440 mm, rechteck 570 x 440 mm
Cutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mm
Cutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 260 x 425 mm
Working height: 735 mm
Hydraulic motor: 1.1 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 2350 mm
Height: 2000 mm
Weight: 3600 kg
4
Metal working and machine toolsSawingBelt saws

Fully automatic band saw HESSE by BEKAMAK BMSO 360 C

HESSE by BEKAMAK BMSO 360 C
Saw frame: Double column Band dimensions: 4800x34x1,1 mm Band speed continous: 20-100 m/min Cutting capacity 0° round: 380 mm Cutting capacity 0° square: 380 mm Cutting capacity 0° flat: 430x380 mm Working height: 590 mm Hydraulic motor: 0.55 kW Motor: 3 kW Coolant pump motor: 0.12 kW Length: 2900 mm Width: 950 mm Height: 1660 mm Weight: 1342 kg
Saw frame: Double column
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 430x380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2900 mm
Width: 950 mm
Height: 1660 mm
Weight: 1342 kg
9
Metal working and machine toolsSawingBelt saws

Fully automatic band saw HESSE by BEKAMAK BMSO 360 CGH NC

HESSE by BEKAMAK BMSO 360 CGH NC
Saw frame: Double column Band dimensions: 5200x34x1,1 mm Band speed continous: 20-100 m/min Cutting capacity 0° round: 360 mm Cutting capacity 0° square: 360 mm Cutting capacity 0° flat: 610x360 mm Cutting capacity 30°: rund 360 mm, quadrat 360 mm, rechteck 570 x 360 mm Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 450 x 360 mm Cutting capacity 60°: rund 325 mm, quadrat 290 mm, rechteck 280 x 360 mm Working height: 735 mm Hydraulic motor: 1.5 kW Motor: 3 kW Coolant pump motor: 0.12 kW Length: 2850 mm Width: 2250 mm Height: 1870 mm Weight: 2400 kg
Saw frame: Double column
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 360 mm
Cutting capacity 0° square: 360 mm
Cutting capacity 0° flat: 610x360 mm
Cutting capacity 30°: rund 360 mm, quadrat 360 mm, rechteck 570 x 360 mm
Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 450 x 360 mm
Cutting capacity 60°: rund 325 mm, quadrat 290 mm, rechteck 280 x 360 mm
Working height: 735 mm
Hydraulic motor: 1.5 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 2250 mm
Height: 1870 mm
Weight: 2400 kg
8
Metal working and machine toolsSawingBelt saws

Fully automatic band saw HESSE by BEKAMAK BMSO 325 CGH NC

HESSE by BEKAMAK BMSO 325 CGH NC
Saw frame: Double column Band dimensions: 4380x34x1,1 mm Band speed continous: 20-100 m/min Cutting capacity 0° round: 325 mm Cutting capacity 0° square: 325 mm Cutting capacity 0° flat: 400x315 mm Cutting capacity 30°: rund 325 mm, quadrat 315 mm, rechteck 380 x 315 mm Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 315 mm Cutting capacity 60°: rund 190 mm, quadrat 190 mm, rechteck 160 x 325 mm Working height: 655 mm Hydraulic motor: 1.1 kW Motor: 2.2 kW Coolant pump motor: 0.12 kW Length: 2130 mm Width: 2150 mm Height: 1650 mm Weight: 1860 kg
Saw frame: Double column
Band dimensions: 4380x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 325 mm
Cutting capacity 0° flat: 400x315 mm
Cutting capacity 30°: rund 325 mm, quadrat 315 mm, rechteck 380 x 315 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 315 mm
Cutting capacity 60°: rund 190 mm, quadrat 190 mm, rechteck 160 x 325 mm
Working height: 655 mm
Hydraulic motor: 1.1 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2130 mm
Width: 2150 mm
Height: 1650 mm
Weight: 1860 kg
4
Metal working and machine toolsSawingBelt saws

Fully automatic band saw HESSE by BEKAMAK BMSO 320 GS NC

HESSE by BEKAMAK BMSO 320 GS NC
Saw frame: Pivot frame Band dimensions: 3660x27x0,9 mm Band speed continous: 20-100 m/min Cutting capacity 0° round: 320 mm Cutting capacity 0° square: 320 mm Cutting capacity 0° flat: 350x320 mm Cutting capacity 30°: rund 160 mm, quadrat 150 mm, rechteck 150 x 150 mm Cutting capacity 45°: rund 260 mm, quadrat 180 mm, rechteck 250 x 180 mm Cutting capacity 60°: rund 300 mm, quadrat 250 mm, rechteck 300 x 200 mm Working height: 740 mm Hydraulic motor: 1.1 kW Motor: 2.2 kW Servomotor: 1 kW Coolant pump motor: 0.12 kW Length: 2120 mm Width: 2100 mm Height: 1810 mm Weight: 1810 kg
Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 350x320 mm
Cutting capacity 30°: rund 160 mm, quadrat 150 mm, rechteck 150 x 150 mm
Cutting capacity 45°: rund 260 mm, quadrat 180 mm, rechteck 250 x 180 mm
Cutting capacity 60°: rund 300 mm, quadrat 250 mm, rechteck 300 x 200 mm
Working height: 740 mm
Hydraulic motor: 1.1 kW
Motor: 2.2 kW
Servomotor: 1 kW
Coolant pump motor: 0.12 kW
Length: 2120 mm
Width: 2100 mm
Height: 1810 mm
Weight: 1810 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine with mandrel ERCOLINA Megabender MG 030

ERCOLINA Megabender MG 030 PT A3/H76
Flexion modulus: 10 cm³ Round tube: 64 x 3 mm Standard steel tube: 64 x 3,3 mm Gas tube: 2" x 40 mm Stainless steel: 60 x 2 mm Hard copper and aluminium: 64 x 4 mm Square tube: 60 x 60 x 4 mm Rect. tube easy way: 40 x 60 x 4 bzw. Ø 60 x 40 x 3 mm Rect. tube hard way: 60 x 40 x 3 mm Max. outer diameter: 64 mm Max. bending radius: 200 mm Min. bending radius: 20 mm Max. bending angle: 210 ° Motor: 4.2 kW Hydraulic oil capacity: 50 l Length: 4000 mm Width: 950 mm Height: 1250 mm Weight: 850 kg
Flexion modulus: 10 cm³
Round tube: 64 x 3 mm
Standard steel tube: 64 x 3,3 mm
Gas tube: 2" x 40 mm
Stainless steel: 60 x 2 mm
Hard copper and aluminium: 64 x 4 mm
Square tube: 60 x 60 x 4 mm
Rect. tube easy way: 40 x 60 x 4 bzw. Ø 60 x 40 x 3 mm
Rect. tube hard way: 60 x 40 x 3 mm
Max. outer diameter: 64 mm
Max. bending radius: 200 mm
Min. bending radius: 20 mm
Max. bending angle: 210 °
Motor: 4.2 kW
Hydraulic oil capacity: 50 l
Length: 4000 mm
Width: 950 mm
Height: 1250 mm
Weight: 850 kg
1
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Superbender SB

ERCOLINA Superbender SB 48T
Flexion modulus: 6 cm³ Standard steel tube: 48 x 3,5 mm Gas tube: 1"1/2 x 3.68 mm Furniture tube: 54 x 1,5 mm FE35 (for hydraulic tubes): 50 x 4 mm Stainless steel AISI304-318: 50 x 3 mm Stainless steel AISI308 (food industry): 40 x 2,5 mm Brass soft: 60 x 3 mm Hard copper and aluminium: 64 x 2 mm Soft copper: 64 x 2 mm Conduit tube (TAZ): 60 x 2 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 32 mm Squarebar solid (S275JO): 30 x 30 mm Flatsteel solid (S275JO): 8 x 48 mm Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm T-profile (S275JO): 40 x 40 x 5 mm U-profile (S275JO): 32 x 16 x 5 mm Max. bending radius: 300 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 4 r/min Motor: 1.5 kW Length: 570 mm Width: 410 mm Height: 1000 mm Weight: 110 kg
Flexion modulus: 6 cm³
Standard steel tube: 48 x 3,5 mm
Gas tube: 1"1/2 x 3.68 mm
Furniture tube: 54 x 1,5 mm
FE35 (for hydraulic tubes): 50 x 4 mm
Stainless steel AISI304-318: 50 x 3 mm
Stainless steel AISI308 (food industry): 40 x 2,5 mm
Brass soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Soft copper: 64 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 32 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 8 x 48 mm
Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm
T-profile (S275JO): 40 x 40 x 5 mm
U-profile (S275JO): 32 x 16 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 4 r/min
Motor: 1.5 kW
Length: 570 mm
Width: 410 mm
Height: 1000 mm
Weight: 110 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 1

ERCOLINA Topbender TB 130 PT
Flexion modulus: 80 cm³ Standard steel tube: 127 x 7,1 mm Gas tube: 4" x 8,56 mm Furniture tube: 127 x 7,1 mm FE35 (for hydraulic tubes): 100 x 11 mm Stainless steel AISI304-318: 114,3 x 5,6 mm Stainless steel AISI308 (food industry): 114,3 x 5,6 mm Brass soft: 139,7 x 8,8 mm Hard copper and aluminium: 139,7 x 8,8 mm Soft copper: 139,7 x 8,8 mm Conduit tube (TAZ): 120 x 9 mm Mepla, Gebereit and similar: 120 x 6.5 mm Roundbar solid (S275JO): 90 mm Squarebar solid (S275JO): 75 x 75 mm Flatsteel solid (S275JO): 100 x 50 mm Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm T-profile (S275JO): 100 x 100 x 10 mm U-profile (S275JO): 100 x 100 x 10 mm Max. bending radius: 700 mm Min. bending radius: 36 mm Min. tube Ø: 10 mm Max. bending speed: 0 - 0,75 r/min Motor: 3.5 kW Length: 850 mm Width: 1200 mm Height: 850 mm Weight: 720 kg
Flexion modulus: 80 cm³
Standard steel tube: 127 x 7,1 mm
Gas tube: 4" x 8,56 mm
Furniture tube: 127 x 7,1 mm
FE35 (for hydraulic tubes): 100 x 11 mm
Stainless steel AISI304-318: 114,3 x 5,6 mm
Stainless steel AISI308 (food industry): 114,3 x 5,6 mm
Brass soft: 139,7 x 8,8 mm
Hard copper and aluminium: 139,7 x 8,8 mm
Soft copper: 139,7 x 8,8 mm
Conduit tube (TAZ): 120 x 9 mm
Mepla, Gebereit and similar: 120 x 6.5 mm
Roundbar solid (S275JO): 90 mm
Squarebar solid (S275JO): 75 x 75 mm
Flatsteel solid (S275JO): 100 x 50 mm
Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm
T-profile (S275JO): 100 x 100 x 10 mm
U-profile (S275JO): 100 x 100 x 10 mm
Max. bending radius: 700 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 0,75 r/min
Motor: 3.5 kW
Length: 850 mm
Width: 1200 mm
Height: 850 mm
Weight: 720 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 6

ERCOLINA Topbender TB 60 T
Flexion modulus: 10 cm³ Standard steel tube: 60 x 4 mm Gas tube: 2" x 4 mm Furniture tube: 60 x 4 mm FE35 (for hydraulic tubes): 64 x 5 mm Stainless steel AISI304-318: 64 x 3 mm Stainless steel AISI308 (food industry): 60 x 3 mm Brass soft: 60 x 6 mm Hard copper and aluminium: 64 x 6 mm Soft copper: 64 x 6 mm Conduit tube (TAZ): 63 x 4 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 35 mm Squarebar solid (S275JO): 30 x 30 mm Flatsteel solid (S275JO): 14 x 60 mm Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm T-profile (S275JO): 50 x 50 x 6 mm U-profile (S275JO): 40 x 20 x 6 mm Max. bending radius: 380 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 1,5 / 3 r/min Motor: 1.5 kW Length: 500 mm Width: 760 mm Height: 1000 mm Weight: 186 kg
Flexion modulus: 10 cm³
Standard steel tube: 60 x 4 mm
Gas tube: 2" x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 5 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 3 mm
Brass soft: 60 x 6 mm
Hard copper and aluminium: 64 x 6 mm
Soft copper: 64 x 6 mm
Conduit tube (TAZ): 63 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 14 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,5 / 3 r/min
Motor: 1.5 kW
Length: 500 mm
Width: 760 mm
Height: 1000 mm
Weight: 186 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 0

ERCOLINA Topbender TB 050 T
Flexion modulus: 10.5 cm³ Standard steel tube: 60 x 3 mm Gas tube: 2"Gas x 4 mm Furniture tube: 60 x 4 mm FE35 (for hydraulic tubes): 64 x 4 mm Stainless steel AISI304-318: 64 x 3 mm Stainless steel AISI308 (food industry): 60 x 4 mm Brass soft: 60 x 4 mm Hard copper and aluminium: 64 x 4 mm Soft copper: 64 x 4 mm Conduit tube (TAZ): 60 x 4 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 35 mm Squarebar solid (S275JO): 30 x 30 mm Flatsteel solid (S275JO): 10 x 60 mm Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm T-profile (S275JO): 50 x 50 x 6 mm U-profile (S275JO): 40 x 20 x 6 mm Max. bending radius: 300 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 1,25 / 2,60 r/min Motor: 1.5 kW Length: 595 mm Width: 363 mm Height: 900 mm Weight: 130 kg
Flexion modulus: 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1.5 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
7
Metal working and machine toolsLathesLathes

Karusselldrehmaschine - Einständer

FRORIEP VTL KE 550 S
Tischdurchmesser: 3000 mmDrehdurchmesser: Max. 5500 mmStänderverfahrweg: 1000 mmDurchgangshöhe: Vertikalschlitten 1854 ma mmTischdrehzahlbereich: 82 U/minTischbelastung: max. 25 tMaschinengewicht ca.: tRaumbedarf ca.: m
Tischdurchmesser: 3000 mm
Drehdurchmesser: Max. 5500 mm
Ständerverfahrweg: 1000 mm
Durchgangshöhe: Vertikalschlitten 1854 ma mm
Tischdrehzahlbereich: 82 U/min
Tischbelastung: max. 25 t
Maschinengewicht ca.: t
Raumbedarf ca.: m
No image available
Metal working and machine toolsPressesStraightening presses

Richtpresse - Horizontal

DIEFFENBACHER
Druck: . tHub: 500 mmDurchgang: 800 mmGegenlager: 3000Stößel: 600x250Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Druck: . t
Hub: 500 mm
Durchgang: 800 mm
Gegenlager: 3000
Stößel: 600x250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsSawingBand saw machines

Bandsägeautomat - Horizontal

AMADA H1300
Schnittdurchmesser: 1300 mmSägebandlänge: 11880 mmSchnittbreite: 1,6 mmHauptantriebsmotor: 11 kWTischfläche: 2300x1200 mmSchnittbereich: 1300x1300 mmGesamtleistungsbedarf: 16 KVAMaschinengewicht ca.: 17,75 tRaumbedarf ca.: m
Schnittdurchmesser: 1300 mm
Sägebandlänge: 11880 mm
Schnittbreite: 1,6 mm
Hauptantriebsmotor: 11 kW
Tischfläche: 2300x1200 mm
Schnittbereich: 1300x1300 mm
Gesamtleistungsbedarf: 16 KVA
Maschinengewicht ca.: 17,75 t
Raumbedarf ca.: m
6
Metal working and machine toolsSawingBand saw machines

Bandsägeautomat - Horizontal

AMADA H1300
Schnittdurchmesser: 1300 mmSägebandlänge: 11880 mmSchnittbreite: 1,6 mmHauptantriebsmotor: 11 kWTischfläche: 2500x1300 mmSchnittbereich: 1300x1300 mmGesamtleistungsbedarf: 16 KVAMaschinengewicht ca.: 17,75 tRaumbedarf ca.: m
Schnittdurchmesser: 1300 mm
Sägebandlänge: 11880 mm
Schnittbreite: 1,6 mm
Hauptantriebsmotor: 11 kW
Tischfläche: 2500x1300 mm
Schnittbereich: 1300x1300 mm
Gesamtleistungsbedarf: 16 KVA
Maschinengewicht ca.: 17,75 t
Raumbedarf ca.: m
10
Metal working and machine toolsSawingBand saw machines

Bandsägeautomat - Horizontal

AMADA PCSW 330
Schnittdurchmesser: 330 mmSägebandlänge: 4115 mmSchnittbreite: 0,9 mmHauptantriebsmotor: 3,7 kWRollenbahnlänge: 5000 mmRollenbahnbreite: 700 mmRollendurchmesser - Bohrung: 150 mmGesamtleistungsbedarf: 13 KVAMaschinengewicht ca.: 1,8 tRaumbedarf ca.: m
Schnittdurchmesser: 330 mm
Sägebandlänge: 4115 mm
Schnittbreite: 0,9 mm
Hauptantriebsmotor: 3,7 kW
Rollenbahnlänge: 5000 mm
Rollenbahnbreite: 700 mm
Rollendurchmesser - Bohrung: 150 mm
Gesamtleistungsbedarf: 13 KVA
Maschinengewicht ca.: 1,8 t
Raumbedarf ca.: m
10
Metal working and machine toolsSawingBand saw machines

Bandsägeautomat - Horizontal

AMADA PCSW 330
Schnittdurchmesser: 330 mmSägebandlänge: 4115 mmSchnittbreite: 0,9 mmHauptantriebsmotor: 3,7 kWRollenbahnlänge: 5000 mmRollenbahnbreite: 700 mmRollendurchmesser - Bohrung: 150 mmGesamtleistungsbedarf: 13 KVAMaschinengewicht ca.: 1,8 tRaumbedarf ca.: m
Schnittdurchmesser: 330 mm
Sägebandlänge: 4115 mm
Schnittbreite: 0,9 mm
Hauptantriebsmotor: 3,7 kW
Rollenbahnlänge: 5000 mm
Rollenbahnbreite: 700 mm
Rollendurchmesser - Bohrung: 150 mm
Gesamtleistungsbedarf: 13 KVA
Maschinengewicht ca.: 1,8 t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesCNC lathes

CNC Drehmaschine

INDEX G 300
Drehdurchmesser: 250 mmDrehlänge: 750 mmSteuerung: SiemensTyp: 840 cSpindeldurchlass: 65 mmWerkzeugwechsler: 2Revolver 12-fach: Pos.angetriebe Werkzeuge: 2x RevolerGesamtleistungsbedarf: kWMaschinengewicht ca.: 7 tRaumbedarf ca.: m
Drehdurchmesser: 250 mm
Drehlänge: 750 mm
Steuerung: Siemens
Typ: 840 c
Spindeldurchlass: 65 mm
Werkzeugwechsler: 2
Revolver 12-fach: Pos.
angetriebe Werkzeuge: 2x Revoler
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 7 t
Raumbedarf ca.: m
No image available
Metal working and machine toolsAccessories and spare partsFaceplates

Planscheibe

HWR 09305 P
Planscheibendurchmesser: 1000 mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: 590 kgRaumbedarf ca.: . m
Planscheibendurchmesser: 1000 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: 590 kg
Raumbedarf ca.: . m
7
Metal working and machine toolsSawingCircular saws

Semi automatic circular saw HESSE by ISITAN SFC 350-VX

HESSE by ISITAN SFC 350-VX
Saw blade diameter: 350 mm Saw blade dimensions: 350x32x63 mm Saw blade speed: 45 / 80 rpm Mitre left: 45 ° Mitre right: 45 ° Cutting capacity 0°: round 115 mm / square 100 x 100 / rectangular 120 x 80 Cutting capacity 45° right: round 110 mm / square 90 x 90 / rectangular 90 x 90 Cutting capacity 45° left: round 110 mm / square 90 x 90 / rectangular 90 x 90 Motor: 5.85 kW Width: 1100 mm Depth: 1000 mm Height: 1400 mm Weight: 300 kg
Saw blade diameter: 350 mm
Saw blade dimensions: 350x32x63 mm
Saw blade speed: 45 / 80 rpm
Mitre left: 45 °
Mitre right: 45 °
Cutting capacity 0°: round 115 mm / square 100 x 100 / rectangular 120 x 80
Cutting capacity 45° right: round 110 mm / square 90 x 90 / rectangular 90 x 90
Cutting capacity 45° left: round 110 mm / square 90 x 90 / rectangular 90 x 90
Motor: 5.85 kW
Width: 1100 mm
Depth: 1000 mm
Height: 1400 mm
Weight: 300 kg
8
Metal working and machine toolsLathesCNC lathes

CNC Drehmaschine

MAZAK SQT 250M
Drehdurchmesser: 300 mmDrehlänge: . mmSteuerung: Mazatrol 640 Tx-Weg: 190 mmy-Weg: 1000 mmz-Weg: 575 mmDrehzahl: 4000 U/minVorschub: 30 m/minWerkzeuganzahl: 12Stangenlader: neinGesamtleistungsbedarf: 18,5 kWMaschinengewicht ca.: 5,9 tRaumbedarf ca.: 5600x2100x2200 m
Drehdurchmesser: 300 mm
Drehlänge: . mm
Steuerung: Mazatrol 640 T
x-Weg: 190 mm
y-Weg: 1000 mm
z-Weg: 575 mm
Drehzahl: 4000 U/min
Vorschub: 30 m/min
Werkzeuganzahl: 12
Stangenlader: nein
Gesamtleistungsbedarf: 18,5 kW
Maschinengewicht ca.: 5,9 t
Raumbedarf ca.: 5600x2100x2200 m
10
Metal working and machine toolsLathesCNC lathes

CNC Drehmaschine

MAZAK 100M
Drehdurchmesser: 280 mmDrehlänge: . mmSteuerung: Mazatrol 640 Tx-Weg: 190 mmy-Weg: 309 mmz-Weg: 330 mmDrehzahl: 4000 U/minVorschub: 30 m/minWerkzeuganzahl: 12Stangenlader: jaGesamtleistungsbedarf: 24 kvAMaschinengewicht ca.: 3,5 tRaumbedarf ca.: . m
Drehdurchmesser: 280 mm
Drehlänge: . mm
Steuerung: Mazatrol 640 T
x-Weg: 190 mm
y-Weg: 309 mm
z-Weg: 330 mm
Drehzahl: 4000 U/min
Vorschub: 30 m/min
Werkzeuganzahl: 12
Stangenlader: ja
Gesamtleistungsbedarf: 24 kvA
Maschinengewicht ca.: 3,5 t
Raumbedarf ca.: . m
6
Metal working and machine toolsDrilling machines and boring mills

Radial drilling machine TAILIFT TPR-1100

TAILIFT TPR-1100
Drilling capacy mild steel: 42 mm Taper: MK 4 Distance spindle - column: 280 – 1.100 mm Revs: 44 – 1.500 (12) r.p.m. Tapping capacity: Steel: M 25, Cast Iron: M 38 Distance table - spindle underside: 470 – 1.270 mm automatic feed: 0,05 – 0,15 (3) mm/min Spindle motor: 2.2 kW Column diameter: 260 mm Quill travel: 280 mm Table: 1.725 x 715 x 180 mm Box table dimensions: 635 x 520 x 415 mm max. height: 2530 mm Length: 1880 mm Width: 870 mm Height: 2210 mm Weight: 1800 kg
Drilling capacy mild steel: 42 mm
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Steel: M 25, Cast Iron: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
5
Metal working and machine toolsPressesEccentric presses

C-frame eccentric press HESSE by FRESAN FP 30 P

HESSE by FRESAN FP 30 P
pressing capacity: 30 to Tonnage rating point: 2 mm Table length: 400 mm Table width: 600 mm Hole in table: 150 mm Stroke: 1 - 60 mm Strokes: 140 1/min Ram guides: 4 Ram adjustment: 60 mm Ram hole: 40 mm Throat depth: 200 mm Daylight: 300 mm Motor: 3 kW Length: 1300 mm Width: 1150 mm Height: 2050 mm Weight: 1670 kg
pressing capacity: 30 to
Tonnage rating point: 2 mm
Table length: 400 mm
Table width: 600 mm
Hole in table: 150 mm
Stroke: 1 - 60 mm
Strokes: 140 1/min
Ram guides: 4
Ram adjustment: 60 mm
Ram hole: 40 mm
Throat depth: 200 mm
Daylight: 300 mm
Motor: 3 kW
Length: 1300 mm
Width: 1150 mm
Height: 2050 mm
Weight: 1670 kg
5
Metal working and machine toolsPressesEccentric presses

C-frame eccentric press HESSE by FRESAN FP 15 P

HESSE by FRESAN FP 15 P
pressing capacity: 15 to Tonnage rating point: 1.4 mm Table length: 320 mm Table width: 490 mm Hole in table: 130 mm Stroke: 1 - 40 mm Strokes: 200 1/min Ram guides: 4 Ram adjustment: 40 mm Ram hole: 30 mm Throat depth: 210 mm Daylight: 215 mm Motor: 1.5 kW Length: 1160 mm Width: 1180 mm Height: 1730 mm Weight: 922 kg
pressing capacity: 15 to
Tonnage rating point: 1.4 mm
Table length: 320 mm
Table width: 490 mm
Hole in table: 130 mm
Stroke: 1 - 40 mm
Strokes: 200 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 30 mm
Throat depth: 210 mm
Daylight: 215 mm
Motor: 1.5 kW
Length: 1160 mm
Width: 1180 mm
Height: 1730 mm
Weight: 922 kg
3
Metal working and machine toolsPressesEccentric presses

C-frame eccentric press HESSE by FRESAN FP 10 P

HESSE by FRESAN FP 10 P
pressing capacity: 10 to Tonnage rating point: 1.4 mm Table length: 270 mm Table width: 370 mm Hole in table: 100 mm Stroke: 1 - 40 mm Strokes: 200 1/min Ram guides: 4 Ram adjustment: 35 mm Ram hole: 25 mm Throat depth: 160 mm Daylight: 180 mm Motor: 0.75 kW Length: 1170 mm Width: 1180 mm Height: 1700 mm Weight: 590 kg
pressing capacity: 10 to
Tonnage rating point: 1.4 mm
Table length: 270 mm
Table width: 370 mm
Hole in table: 100 mm
Stroke: 1 - 40 mm
Strokes: 200 1/min
Ram guides: 4
Ram adjustment: 35 mm
Ram hole: 25 mm
Throat depth: 160 mm
Daylight: 180 mm
Motor: 0.75 kW
Length: 1170 mm
Width: 1180 mm
Height: 1700 mm
Weight: 590 kg
No image available
Printing machineryOther

RF87 DRP90M4/DH- 1450/10RPM - 0.75kW

RF87 DRP90M4/DH- 1450/10RPM
No image available
Printing machineryOther

Display Fridge ECO-MD60/100 Silver Steel

Frost-Tech ECO-MD60/100 Silver Steel
Display Fridge ECO-MD60/100In StockSpecificationDetailManufacturer Frost-TechModel Display Fridge ECO-MD60/100 Silver SteelPhase Single PhaseLength(mm) 600Width(mm) 1000Height(mm) 1950
Display Fridge ECO-MD60/100
In Stock
SpecificationDetail
Manufacturer Frost-Tech
Model Display Fridge ECO-MD60/100 Silver Steel
Phase Single Phase
Length(mm) 600
Width(mm) 1000
Height(mm) 1950
No image available
Printing machineryCutting machines

Polar Countertop Manual Fill Ice Machine

Polar Countertop Manual Fill Ice Machine
Polar Countertop Manual Fill Ice MachineIn StockSpecificationDetailManufacturer PolarModel G620-04Phase Single PhaseLength(mm) 420Width(mm) 365Height(mm) 415
Polar Countertop Manual Fill Ice Machine
In Stock
SpecificationDetail
Manufacturer Polar
Model G620-04
Phase Single Phase
Length(mm) 420
Width(mm) 365
Height(mm) 415
No image available
Printing machineryCutting machines

Polar Blast Chiller/Freezer CK640

Polar Blast Chiller/Freezer CK640
Polar - Blast Chiller/Freezer CK640In StockSpecificationDetailManufacturer PolarModel CK640Phase Single PhaseLength(mm) 640Width(mm) 670Height(mm) 400
Polar - Blast Chiller/Freezer CK640
In Stock
SpecificationDetail
Manufacturer Polar
Model CK640
Phase Single Phase
Length(mm) 640
Width(mm) 670
Height(mm) 400
No image available
Printing machineryCutting machines

Polar - Single Door Fridge

Polar Single Door Fridge
Polar - Single Door Fridge - 150w 0.9AIn StockSpecificationDetailManufacturer PolarModel CD083Phase SingleLength(mm) 600Width(mm) 600Height(mm) 1850
Polar - Single Door Fridge - 150w 0.9A
In Stock
SpecificationDetail
Manufacturer Polar
Model CD083
Phase Single
Length(mm) 600
Width(mm) 600
Height(mm) 1850
No image available
Printing machineryCutting machines

Polar - Single Door Fridge

Polar Single Door Fridge
Polar - Single Door FridgeIn StockSpecificationDetailManufacturer PolarModel CD083Phase Single PhaseLength(mm) 600Width(mm) 600Height(mm) 1850
Polar - Single Door Fridge
In Stock
SpecificationDetail
Manufacturer Polar
Model CD083
Phase Single Phase
Length(mm) 600
Width(mm) 600
Height(mm) 1850
No image available
Printing machineryCutting machines

Polar - Single Door Fridge

Polar Single Door Fridge
Polar - Single Door FridgeIn StockSpecificationDetailManufacturer | PolarModel | CD083Phase | Single PhaseLength(mm) | 600Width(mm) | 600Height(mm) | 1850
Polar - Single Door Fridge

In Stock

SpecificationDetail

Manufacturer | Polar
Model | CD083
Phase | Single Phase
Length(mm) | 600
Width(mm) | 600
Height(mm) | 1850
No image available
Printing machineryCutting machines

Polar Single Door Fridge

Polar Single Door Fridge
Polar Single Door FridgeIn StockSpecificationDetailManufacturer PolarModel CD084Phase Single Phase 0.9Amp 130WLength(mm) 700Width(mm) 800Height(mm) 1900
Polar Single Door Fridge

In Stock

SpecificationDetail

Manufacturer Polar
Model CD084
Phase Single Phase 0.9Amp 130W
Length(mm) 700
Width(mm) 800
Height(mm) 1900
No image available
Printing machineryOther

Rational UV XS 6 2/3 E Oven

Rational UV XS 6 2/3 E Oven
Rational UV XS 6 2/3 E OvenIn StockSpecificationDetailManufacturer RationalModel Rational UV XS 6 2/3 E OvenPhase 3 PhaseLength(mm) 600Width(mm) 670Height(mm) 820
Rational UV XS 6 2/3 E Oven

In Stock

SpecificationDetail

Manufacturer Rational
Model Rational UV XS 6 2/3 E Oven
Phase 3 Phase
Length(mm) 600
Width(mm) 670
Height(mm) 820
No image available
Printing machineryOther

Merrychef Eikon E2S

Merrychef Eikon E2S
Merrychef Eikon E2SIn StockSpecificationDetailManufacturer MerryChefModel Eikon E2SPhase Single PhaseLength(mm) 595Width(mm) 356Height(mm) 620
Merrychef Eikon E2S
In Stock
SpecificationDetail
Manufacturer MerryChef
Model Eikon E2S
Phase Single Phase
Length(mm) 595
Width(mm) 356
Height(mm) 620
No image available
Printing machineryCutting machines

Polar GD879-03 - Double Door Fridge

Polar GD879-03 - Double Door Fridge
Polar GD879-03In StockSpecificationDetailManufacturer PolarModel GD789-03Phase Single PhaseLength(mm) 700Width(mm) 1340Height(mm) 2050
Polar GD879-03
In Stock
SpecificationDetail
Manufacturer Polar
Model GD789-03
Phase Single Phase
Length(mm) 700
Width(mm) 1340
Height(mm) 2050
No image available
Metal working and machine toolsCutting machines and equipment

Talsa K15 Neo Bowl Chopper/Cutter

Talsa K15 Neo Bowl Chopper/Cutter
Talsa K15 - NEOIn StockSpecificationDetailManufacturer TalsaModel K15 - NEOPhase Single PhaseLength(mm) 640Width(mm) 920Height(mm) 550
Talsa K15 - NEO

In Stock

SpecificationDetail

Manufacturer Talsa
Model K15 - NEO
Phase Single Phase
Length(mm) 640
Width(mm) 920
Height(mm) 550
No image available
Printing machineryOther

Proseal GT-1 (Preowned for Sale)

Proseal GT-1
Used Proseal GT-1 for SaleIn StockUsed Proseal GT-1 for sale; if you require more information, please call us at 075 3305 8851. We're always happy to assist you!Unit 2, Perry Park Industrial Estate, Walsall Rd, Birmingham B42 1BT+447533058851info@amberfoodmachinery.comWhatsApp - CONNECT WITH US, send us your images and message on +44 7533 058851, scan the QR code to begin a WhatsApp chat with us.Click here to sell your machineryGet a Valuation"*" indicates required fieldsName*Contact Number*Email*MessageCAPTCHAWhatsApp - CONNECT WITH US, send us your images and message on +44 7533 058851, scan the QR code to begin a WhatsApp chat with us. Hi 👋Contact us for support or advice✖InformationEmailDetailsCAPTCHA
Used Proseal GT-1 for Sale

In Stock

Used Proseal GT-1 for sale; if you require more information, please call us at 075 3305 8851. We're always happy to assist you!

Unit 2, Perry Park Industrial Estate, Walsall Rd, Birmingham B42 1BT

+447533058851

info@amberfoodmachinery.com

WhatsApp - CONNECT WITH US, send us your images and message on +44 7533 058851, scan the QR code to begin a WhatsApp chat with us.

Click here to sell your machinery

Get a Valuation

"*" indicates required fields

Name*

Contact Number*

Email*

Message

CAPTCHA

WhatsApp - CONNECT WITH US, send us your images and message on +44 7533 058851, scan the QR code to begin a WhatsApp chat with us.



Hi 👋

Contact us for support or advice

✖

Information

Email

Details

CAPTCHA
No image available
Printing machineryOther

Single Turnstile (Preowned for sale)

Fencing Direct Single Turnstile
TurnstileIn StockSpecificationDetailManufacturer Fencing DirectModel Single TurnstilePhase Length(mm) Width(mm) Height(mm)
Turnstile
In Stock
SpecificationDetail
Manufacturer Fencing Direct
Model Single Turnstile
Phase
Length(mm)
Width(mm)
Height(mm)
No image available
Woodworking machineryBrushing machines

Ravenwood Top and bottom labeller

Ravenwood Top and bottom labeller
Ravenwood top & bottom labellerIn StockSpecificationDetailManufacturerModelRavenwoodPhaseLength(mm)Width(mm)Height(mm)
Ravenwood top & bottom labeller

In Stock

SpecificationDetail

Manufacturer

Model

Ravenwood

Phase

Length(mm)

Width(mm)

Height(mm)
No image available
Woodworking machineryBrushing machines

Ravenwood Top and Base Labiller

Ravenwood Top and Base Labiller
Ravenwood Top & Base LabillerIn StockSpecificationDetailManufacturer RavenwoodModel Top and Base LabillerPhase Length(mm) Width(mm) Height(mm)
Ravenwood Top & Base Labiller

In Stock

SpecificationDetail

Manufacturer Ravenwood
Model Top and Base Labiller
Phase
Length(mm)
Width(mm)
Height(mm)
6
Food machinesBakery-, pastry equipmentMixers

MacPan MSPV300 Self Tilting Bowl Mixer

MacPan MSPV300 Self tilting bowl mixer, 2022, Stainless bowl and beater attachment, forward and reverse bowl, with timers, 3Ph
MacPan MSPV300 Self tilting bowl mixer, 2022, Stainless bowl and beater attachment, forward and reverse bowl, with timers, 3Ph
6
Food machinesOther

Autopack Bucket elevator conveyor

Autopack Bucket elevator conveyor, 2019, Stainless, elevates from 500mm and discharges at 2300mm, overall length 3200mm, 3Ph
Autopack Bucket elevator conveyor, 2019, Stainless, elevates from 500mm and discharges at 2300mm, overall length 3200mm, 3Ph
Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.
Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !
Sign up now for free