Länge: 2400 mm
Breite: 3100 mm
Tischhöhe: 660 mm
Dicke: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 7 t
Raumbedarf ca.: 2,4x3,1x0,66 m

Tischlänge: 12000 mm
Tischbreite: 8000 mm
Tischhöhe: 800 mm
Dicke der Platte: 300
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 82,5 t
Raumbedarf ca.: 12x8 m

Tischlänge: 1000 mm
Tischbreite: 1008 mm
Tischhöhe: 130 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m

FAM Mantis Belt slicer, 2006, stainless, V belt slicer, HMI Touch screen controls, V belt length 2300mm, equipped with cutting wheel that holds 25 knives, up to 7000Kgs per hour, mobile, 3Ph

Russell Finex 30224 Vibratory separator 2015, stainless, five deck separator, with stainless mesh's, 3Ph

Russell Finex 17240 Vibratory sieve, 2018, Stainless compact vibratory sieve, 550mm mesh diameter, mobile, 3Ph

Saw blade diameter: 360 mm
Saw blade dimensions: Ø360 x 40 mm
Saw blade speed: 40 - 280 rpm
Cutting capacity 0°: round: 20 - 100 mm, square: 20 - 60 mm
Min. rest piece length: 60 mm
Feeding length: 10 - 9999 mm
Working height: 900 mm
Motor: 15 kW
Total power: 21 kW
Width: 3400 mm
Depth: 2675 mm
Height: 2750 mm
Weight: 3450 kg

Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.55 kW
Length: 1400 mm
Width: 1200 mm
Height: 1550 mm
Weight: 190 kg

Macmon M100 Universalfräsmaschine mit Vertikalkopf

-Frässpindel
-Anzahl der Spindeldrehzahlen: 16
-Spindeldrehzahlen: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 U/min
-Spindel-Innenkegel: ISO 40
-Spannzangenbohrung bis: 25 mm Ø
-Spindelblock
-Spindelblockverschiebung von Hand: 170 mm
-Senkrechtfrästisch
-Größe der Aufspannfläche: 640 × 195 mm
-2 T-Nuten, Breite/Abstand: 12 / 90 mm
-Längsbewegung selbsttätig/von Hand: 290 / 310 mm
-Senkrechtbewegung selbsttätig/von Hand: 310 / 340 mm
-Vorschubgetriebe
-Anzahl der Vorschübe: 16
-Größe der Vorschübe (mm/min): 9, 14, 18, 22,4, 28, 35,5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450
-Bewegungsspindeln
-Längsbewegung des Tisches (1 Umdrehung): 5 mm
-Senkrechtbewegung des Tisches (1 Umdrehung): 2,5 mm
-Spindelblockbewegung (1 Umdrehung): 2 mm
-1 Teilstrich (längs u. senkrecht): 0,02 mm
-1 Teilstrich (quer): 0,01 mm
-Antriebsmotor
-Leistung: 1,3 / 1,8 kW
-Drehzahl: 700 / 1400 U/min
-Übertragungselemente
-2 Keilriemen DIN 2215: 13 × 8 × 1500 mm (Innenlänge)

Abmaße:
LxBxH 1,0x1,0x1,3 Meter / Gewicht 700Kg

Universalfräsmaschine HERMLE UWF 802 M mit Streckensteuerung HS 401

-HS 401- Streckensteuerung
-Verfahrwege X / Y / Z 500x430x400mm
-Starrer Winkeltisch
-Drehzahlbereich 18-3550 U/min
-Vorschub stufenlos in allen drei Achsen 0-1600 mm/min
-Eilgänge 0-1,6 M/min in allen drei Achsen
-Vertikal - Horizontalfräseinrichtung
-Werkzeugaufnahme ISO 40
-Hydraulische Werkzeugspannung
-Zentralschmierung
-Spänewanne
-Antriebsleistung 6 KW
-Arbeitsleuchte
-Spindelschutz
-Dokumentation

Abmaße LxBxH 1,9x1,8x1,9 Meter / Gewicht: 1800Kg

Weiler Condor B mit Heidenhain 3 - Achs Digitalanzeige

-Umlaufdurchmesser über Bett 330mm
-Drehdurchmesser über dem Planschlitten 185mm
-Spitzenhöhe 165mm
-Drehlänge 750mm
-Spindeldrehzahlen 22-2800 U/min
-Spindeldurchlass 40mm
-Reitstock-Pinolenaufnahme MK 3
-Pinolenhub 110mm
-Gesamtleistungsbedarf 3kW
-Heidenhain 3 - Achs Digitalanzeige
-Multifix Halter
-Multifix Kasette 3 Stück
-3 Backenfutter Forkardt
-div. Maschinenschlüssel
-Maschinenfüsse
-LED Arbeitsleuchte
-Futterschutz mit elektrischer Abschaltung
-Revolveranschlag
-Doku/Bedienungsanleitung

Abmaße:
LxBxH 1,8x0,8x1,2 Meter / 1040Kg

CPS holding vessel, Stainless 500L holding tank, jacketed, side bottom discharge with valve, mounted on stainless frame

NNP Stainless conveyor, Stainless, variable speed, belt dimensions 2550mm x 300mm, mobile, 1Ph

Saw frame: Double column
Band dimensions: 3270x27x0,9 mm
Band speed: 40/80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 350x260 mm
Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm
Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm
Working height: 830 mm
Motor: 1.5 kW
Length: 1500 mm
Width: 1600 mm
Height: 1900 mm
Weight: 590 kg

Garos GBT300 Tote bin tumbler, 2018, Stainless, tote bin mixer, the complete answer for tumbling, mixing, coating and marinating, HMI touch screen controls with programmable cycles, 3Ph

Drilling capacy mild steel: 25 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg

Drilling capacy mild steel: 25 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg

Saw frame: Pivot frame
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 610x440 mm
Cutting capacity 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity 60°: rund 320 mm, quadrat 250 mm, rechteck 250 x 440 mm
Cutting capacity - 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity - 60°: rund 320 mm, quadrat 285 mm, rechteck 285 x 440 mm
Working height: 860 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1540 kg

Saw frame: Pivot frame
Band dimensions: 3160x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 270 mm
Cutting capacity 0° square: 270 mm
Cutting capacity 0° flat: 340 x 220 mm
Cutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mm
Cutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mm
Cutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mm
Working height: 910 mm
Hydraulic motor: 0.37 kW
Motor: 1.5 kW
Coolant pump motor: 0.12 kW
Length: 1730 mm
Width: 770 mm
Height: 1460 mm
Weight: 476 kg

Saw frame: Pivot frame
Band dimensions: 2730x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 230 mm
Cutting capacity 0° square: 230 mm
Cutting capacity 0° flat: 320x130 mm
Cutting capacity 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160 mm
Cutting capacity 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100 mm
Cutting capacity - 45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100 mm
Working height: 760 mm
Hydraulic motor: 0.37 kW
Motor: 1.3 kW
Coolant pump motor: 0.12 kW
Length: 1350 mm
Width: 700 mm
Height: 1300 mm
Weight: 430 kg

Drilling capacy mild steel: 20 mm
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg

Drilling capacy mild steel: 23 mm
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 20 - 2000 r.p.m.
Motor: 1 kW
Tapping capacity: M16x1
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg

Drilling capacy mild steel: 20 mm
Taper: MK 2
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 100 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg

Drilling capacy mild steel: 15 mm
Taper: MK 2
Distance spindle - column: 220 mm
Revs: 40 - 4000 r.p.m.
Tapping capacity: M12
Quill travel: 70 mm
Distance spindle - table: 85 - 370 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 400 mm
Width: 520 mm
Height: 850 mm
Weight: 65 kg

Drilling capacy mild steel: 6 mm
Taper: B 12
Distance spindle - column: 220 mm
Revs: 100 - 10000 r.p.m.
Tapping capacity: M5
Quill travel: 60 mm
Distance spindle - table: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 452 mm
Width: 700 mm
Height: 1130 mm
Weight: 44 kg

Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 220 mm
Revs: 60 - 6000 r.p.m.
Quill travel: 60 mm
Distance spindle - table: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 350 mm
Width: 520 mm
Height: 820 mm
Weight: 44 kg

Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 220 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 60 mm
Distance spindle-base: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 320 mm
Width: 520 mm
Height: 820 mm
Weight: 44 kg

Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 220 mm
Revs: 250 - 3000 r.p.m.
Quill travel: 60 mm
Distance spindle - table: 140 - 315 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 320 mm
Width: 520 mm
Height: 820 mm
Weight: 44 kg

pressing capacity: 100 to
Tonnage rating point: 4.5 mm
Table length: 700 mm
Table width: 1000 mm
Hole in table: 210 mm
Stroke: 1 - 132 mm
Strokes: 58 1/min
Ram guides: 6
Ram adjustment: 90 mm
Ram hole: 60 mm
Throat depth: 300 mm
Daylight: 445 mm
Motor: 7.5 kW
Length: 1650 mm
Width: 1545 mm
Height: 3011 mm
Weight: 7000 kg

Delfin Auriga 500 Flow wrapper, Serial: 11110, 2016, flow wrapper, jaw width 230mm, up to 120 cycles per min, infeed length 2100mm, overall length 3700mm, HMI touch screen controls, reel holder up to 500mm film, 3Ph

NiroTech RX200 Twin shaft paddle mixer, Serial: 3052022, 2022, Stainless, twin shaft paddle mixer, variable speed, forward and reverse, guarded lid, manual discharge door, 3Ph

PM In tray cake cutter, Stainless frame, previously used for 300mm x 300mm, with spare blades, two in stock

Flexion modulus: 4 cm³
Standard steel tube: 42 x 3 mm
Furniture tube: 48 x 1,5 mm
FE35 (for hydraulic tubes): 42 x 4 mm
Stainless steel AISI304-318: 42 x 3 mm
Stainless steel AISI308 (food industry): 42 x 2,5 mm
Brass soft: 50 x 3 mm
Hard copper and aluminium: 54 x 2 mm
Soft copper: 60 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 30 mm
Flatsteel solid (S275JO): 40x20 (liegend), 40x12 (stehend) mm
Max. bending radius: 260 mm
Min. bending radius: 10 mm
Max. bending speed: 4 r/min
Motor: 1.1 kW
Length: 400 mm
Width: 570 mm
Height: 1000 mm
Weight: 80 kg

Length: 585 mm
Width: 700 mm
Height: 170 mm
Weight: 240 kg

Bending length: 1050 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 75 mm
Motor power: 1.5 kW
Length: 1610 mm
Width: 700 mm
Height: 1160 mm
Weight: 385 kg

NNP Elevator screw conveyor, Stainless, elevates from 300mm to 1200mm, screw diameter 100mm, overall length 2900, 3Ph

ALP Greaser Rotary greaser, Stainless, rotary greasing machine previously used for greasing tins and trays, slat conveyor 1400mm x 300mm, with top mounted rotary greasing head, comes with recirculation pump and tank, mobile, 3Ph

Tonelli Pumpa Lobe pump, Stainless lobe pump mounted on stainless frame, variable speed, inlet and outlet 70mm, mobile, 3Ph

NNP Mono pump Stainless mono pump mounted on stainless skid, centrifugal with single rotor, operated horizontally, 60mm inlet and outlet, 3Ph

Ward Bekker Auger Filler, Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph

Mono FG122 Bread slicer, Stainless bread slicer, mesh guarded safety for loading bread into, mobile, 1Ph

Maschinpex flighted elevator conveyor, Stainless, variable speed, elevates from 200mm to 2200mm, angle of conveyor can be changed, belt width 100mm, mobile, 1Ph

Dorner Flighted elevator conveyor, Stainless, elevates from 550mm to 2250mm, variable speed, belt width 350mm, overall length 2000mm, mobile, 1Ph

CE King TB4 Tablet counter, Stainless, electronic tablet or capsule counter, two channel, product hopper with top cover and vibration frequency control of product onto the feed chute, mounted on slat chain conveyor 3000mm x 100mm, fills up to 30 containers per min, 3Ph

Swiftpack SPC4P Tablet counter, Stainless, two lane digital tablet counter, designed for high precision counting of tablets and capsules, previously used to fill both plastic and glass bottles,

Saw blade diameter: 300 mm
Saw blade dimensions: 300 x (2)2,5 x 32 mm
Saw blade speed: Array rpm
Mitre left: 45 °
Mitre right: 45 °
Cutting capacity 0°: rund 102 mm, Quadratprofil 90 mm, Rechteckprofil 120 x 80 mm
Cutting capacity 45° right: rund 90 mm, Quadratprofil 80 mm, Rechteckprofil 90 x 70 mm
Cutting capacity 45° left: rund 80 mm, Quadratprofil 70 mm, Rechteckprofil 85 x 70 mm
Width: 500 mm
Depth: 1050 mm
Height: 990 mm
Weight: 135 kg

pressing capacity: 100 to
Tonnage rating point: 5 mm
Table length: 1000 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 140 mm
Strokes: 45 - 70 1/min
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 570 mm
Motor: 11 kW
Length: 1320 mm
Width: 2200 mm
Height: 3080 mm
Weight: 10000 kg

Ref. no.: 18597
Manufacturer: ENGEL
Year of construction: 2007

Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar

Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg

Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.

One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.

Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.

The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.

The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.

The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.

The ENGEL INSERT series is particularly suitable for:

* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products

With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Electrolux Smart Variomix 300L Boiling pan, 2021, Stainless, 300L cooking kettle, electrically heated, 52Kw, max temp 127'c, with spare mixing arm and box of spare parts, 3Ph

Metos Viking Combi 300EM Mixing Kettle, 2015, Stainless, 300L cooking kettle, electrically heated, 41.5Kw, variable speed and temperature controls, guarded lid, tilt to discharge, 3Ph