8
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2000 mm
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg
Bending length: 2000 mm
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg
1
Metal working and machine toolsAccessories and spare parts
Jaw opening: 200 mm
jaw height: 63 mm
Opening of upper beam: 160 mm
Jaw opening: 200 mm
jaw height: 63 mm
Opening of upper beam: 160 mm
jaw height: 63 mm
Opening of upper beam: 160 mm
2
Metal working and machine toolsAccessories and spare parts
Jaw opening: 200 mm
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
Jaw opening: 200 mm
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
jaw height: 62 mm
Opening of upper beam: 300 mm
Clamping Force: 8500 kg
Weight: 110 kg
1
Metal working and machine toolsAccessories and spare parts
Jaw opening: 160 mm
jaw height: 50 mm
Opening of upper beam: 125 mm
Jaw opening: 160 mm
jaw height: 50 mm
Opening of upper beam: 125 mm
jaw height: 50 mm
Opening of upper beam: 125 mm
1
Metal working and machine toolsAccessories and spare parts
Jaw opening: 140 mm
jaw height: 50 mm
Opening of upper beam: 147 mm
Weight: 15 kg
Jaw opening: 140 mm
jaw height: 50 mm
Opening of upper beam: 147 mm
Weight: 15 kg
jaw height: 50 mm
Opening of upper beam: 147 mm
Weight: 15 kg
3
Metal working and machine toolsAccessories and spare parts
Jaw opening: 125 mm
jaw height: 44 mm
Opening of upper beam: 100 mm
Weight: 16 kg
Jaw opening: 125 mm
jaw height: 44 mm
Opening of upper beam: 100 mm
Weight: 16 kg
jaw height: 44 mm
Opening of upper beam: 100 mm
Weight: 16 kg
1
Metal working and machine toolsAccessories and spare parts
Jaw opening: 125 mm
jaw height: 45 mm
Opening of upper beam: 100 mm
Weight: 29 kg
Jaw opening: 125 mm
jaw height: 45 mm
Opening of upper beam: 100 mm
Weight: 29 kg
jaw height: 45 mm
Opening of upper beam: 100 mm
Weight: 29 kg
1
Metal working and machine toolsAccessories and spare parts
Jaw opening: 100 mm
jaw height: 40 mm
Opening of upper beam: 108 mm
Weight: 13 kg
Jaw opening: 100 mm
jaw height: 40 mm
Opening of upper beam: 108 mm
Weight: 13 kg
jaw height: 40 mm
Opening of upper beam: 108 mm
Weight: 13 kg
4
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
8
Metal working and machine toolsSheet metal working machinesSlitting and cut-to-length lines
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
11
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 1050 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
Bending length: 1050 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
5
Food machinesOther
NNP Screw conveyor, Stainless screw conveyor, total length of screw 4800mm, screw diameter 230mm, mesh guarded lids, 4Kw, 3Ph
NNP Screw conveyor, Stainless screw conveyor, total length of screw 4800mm, screw diameter 230mm, mesh guarded lids, 4Kw, 3Ph
4
Food machinesMeat processing
Single ST01 Thermal oil temperature control unit, Mobile, thermal oil temperature control unit, up to 300'C, see plate for full spec
Single ST01 Thermal oil temperature control unit, Mobile, thermal oil temperature control unit, up to 300'C, see plate for full spec
1
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 40 to
Bending length: 2050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1700 mm
Gap in side frame: 350 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Motor power: 7.2 kW
Length: 2600 mm
Width: 1450 mm
Height: 2650 mm
Weight: 4400 kg
pressing capacity: 40 to
Bending length: 2050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1700 mm
Gap in side frame: 350 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Motor power: 7.2 kW
Length: 2600 mm
Width: 1450 mm
Height: 2650 mm
Weight: 4400 kg
Bending length: 2050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1700 mm
Gap in side frame: 350 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Motor power: 7.2 kW
Length: 2600 mm
Width: 1450 mm
Height: 2650 mm
Weight: 4400 kg
1
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 40 to
Bending length: 1250 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1050 mm
Gap in side frame: 250 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 115 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 1000 mm
Motor power: 7.2 kW
Length: 1950 mm
Width: 1450 mm
Height: 2650 mm
Weight: 3600 kg
pressing capacity: 40 to
Bending length: 1250 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1050 mm
Gap in side frame: 250 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 115 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 1000 mm
Motor power: 7.2 kW
Length: 1950 mm
Width: 1450 mm
Height: 2650 mm
Weight: 3600 kg
Bending length: 1250 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1050 mm
Gap in side frame: 250 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 115 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 1000 mm
Motor power: 7.2 kW
Length: 1950 mm
Width: 1450 mm
Height: 2650 mm
Weight: 3600 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 320 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 16500 kg
pressing capacity: 320 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 16500 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 16500 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
10
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 175 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X / R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 4 kW
Length: 4250 mm
Width: 1700 mm
Height: 2750 mm
Weight: 10900 kg
pressing capacity: 175 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X / R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 4 kW
Length: 4250 mm
Width: 1700 mm
Height: 2750 mm
Weight: 10900 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X / R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 4 kW
Length: 4250 mm
Width: 1700 mm
Height: 2750 mm
Weight: 10900 kg
6
Food machinesBakery-, pastry equipmentMixers
J.Engelsmann LDKM double cone mixer, Stainless double cone mixer, 30L capacity, with timer, mounted on mobile stainless frame, 3Ph
J.Engelsmann LDKM double cone mixer, Stainless double cone mixer, 30L capacity, with timer, mounted on mobile stainless frame, 3Ph
4
Food machinesOther
Stainless, elevates from 300mm to 1250mm, belt width 250mm, overall length 2300mm, mobile, 3Ph
Stainless, elevates from 300mm to 1250mm, belt width 250mm, overall length 2300mm, mobile, 3Ph
4
Food machinesOther
NNP flighted elevator conveyor, Stainless, elevates from 300mm to 1250mm or can be lifted to 700mm infeed and 1650 discharge, overall length 2500mm, belt width 250mm, mobile, 3Ph
NNP flighted elevator conveyor, Stainless, elevates from 300mm to 1250mm or can be lifted to 700mm infeed and 1650 discharge, overall length 2500mm, belt width 250mm, mobile, 3Ph
10
Metal working and machine toolsLathesLathes
KNUTH Drehmaschine-Spitzenhöhe 150mm-Max Drehdurchmesser 300mm-Max Drehdurchmesser über Support 178mm-Max. Drehdurchmesser ohne Brücke 430mm-Spitzenweite: 810 mm-Spindelbohrung: Ø 38 mm-Spindeldrehzahl: 60–1.550 U/min, 9 Stufen-Automatische Längs / Planvorschübe-Spindelaufnahme: Camlock D1-4”-Reitstockkonus: MK 3-Pinolenhub: 100 mm-Bettbreite: 180 mm-3-Achs-Digitalanzeige-Multifix-Schnellwechselhalter mit Einsatz-Elektrischer Futterschutz-Arbeitsleuchte-Mitlaufende Körnerspitze-3-Backenfutter-2x Lünetten-DokumentationAbmaße:LxBxH 1,6x0,7x1,2 Meter / Gewicht 520Kg
KNUTH Drehmaschine
-Spitzenhöhe 150mm
-Max Drehdurchmesser 300mm
-Max Drehdurchmesser über Support 178mm
-Max. Drehdurchmesser ohne Brücke 430mm
-Spitzenweite: 810 mm
-Spindelbohrung: Ø 38 mm
-Spindeldrehzahl: 60–1.550 U/min, 9 Stufen
-Automatische Längs / Planvorschübe
-Spindelaufnahme: Camlock D1-4”
-Reitstockkonus: MK 3
-Pinolenhub: 100 mm
-Bettbreite: 180 mm
-3-Achs-Digitalanzeige
-Multifix-Schnellwechselhalter mit Einsatz
-Elektrischer Futterschutz
-Arbeitsleuchte
-Mitlaufende Körnerspitze
-3-Backenfutter
-2x Lünetten
-Dokumentation
Abmaße:
LxBxH 1,6x0,7x1,2 Meter / Gewicht 520Kg
-Spitzenhöhe 150mm
-Max Drehdurchmesser 300mm
-Max Drehdurchmesser über Support 178mm
-Max. Drehdurchmesser ohne Brücke 430mm
-Spitzenweite: 810 mm
-Spindelbohrung: Ø 38 mm
-Spindeldrehzahl: 60–1.550 U/min, 9 Stufen
-Automatische Längs / Planvorschübe
-Spindelaufnahme: Camlock D1-4”
-Reitstockkonus: MK 3
-Pinolenhub: 100 mm
-Bettbreite: 180 mm
-3-Achs-Digitalanzeige
-Multifix-Schnellwechselhalter mit Einsatz
-Elektrischer Futterschutz
-Arbeitsleuchte
-Mitlaufende Körnerspitze
-3-Backenfutter
-2x Lünetten
-Dokumentation
Abmaße:
LxBxH 1,6x0,7x1,2 Meter / Gewicht 520Kg
2
Metal working and machine toolsSanding machinesCylindrical grinding machines
DELTA LC 400 - Rundtischschleifmaschine-Magnetspannplatte (Drehtisch) 300mm-Max. Schleifdurchmesser 400mm-Schleifhöhe (Abstand Tisch - Schleifscheibe) ca. 230mm-Spindeldrehzahl 2850 U/min-Feinzustellung 0,01 mm-Abstand Säule - Schleifscheibenachse ca.320mm-Spindelmotor 3 KW-Schleifscheibenabmaße 200x80x78mm-Maschinenumhausung-Kühlmitteleinrichtung-DokumentationAbmaße:LxBxH 1,2x0,8x1,8 Meter / Gewicht ca. 700Kg
DELTA LC 400 - Rundtischschleifmaschine
-Magnetspannplatte (Drehtisch) 300mm
-Max. Schleifdurchmesser 400mm
-Schleifhöhe (Abstand Tisch - Schleifscheibe) ca. 230mm
-Spindeldrehzahl 2850 U/min
-Feinzustellung 0,01 mm
-Abstand Säule - Schleifscheibenachse ca.320mm
-Spindelmotor 3 KW
-Schleifscheibenabmaße 200x80x78mm
-Maschinenumhausung
-Kühlmitteleinrichtung
-Dokumentation
Abmaße:
LxBxH 1,2x0,8x1,8 Meter / Gewicht ca. 700Kg
-Magnetspannplatte (Drehtisch) 300mm
-Max. Schleifdurchmesser 400mm
-Schleifhöhe (Abstand Tisch - Schleifscheibe) ca. 230mm
-Spindeldrehzahl 2850 U/min
-Feinzustellung 0,01 mm
-Abstand Säule - Schleifscheibenachse ca.320mm
-Spindelmotor 3 KW
-Schleifscheibenabmaße 200x80x78mm
-Maschinenumhausung
-Kühlmitteleinrichtung
-Dokumentation
Abmaße:
LxBxH 1,2x0,8x1,8 Meter / Gewicht ca. 700Kg
2
Metal working and machine toolsSheet metal working machinesBending machines
JUTEC 3000 Biegemaschine-Baujahr 2021-CE-Kennung-FußschalterAbmaße:LxBxH 0,7x0,5x1,3 Meter / Gewicht 200Kg
JUTEC 3000 Biegemaschine
-Baujahr 2021
-CE-Kennung
-Fußschalter
Abmaße:
LxBxH 0,7x0,5x1,3 Meter / Gewicht 200Kg
-Baujahr 2021
-CE-Kennung
-Fußschalter
Abmaße:
LxBxH 0,7x0,5x1,3 Meter / Gewicht 200Kg
6
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Strokes: 19 1/min
Cutting angle: 1.5 °
Number of downholders: 14 pcs.
Back gauge: 1000 mm
Motor power: 15 kW
Oiltank: 200 l
Length: 3700 mm
Width: 2250 mm
Total width with support arm und protection fence: 2700 mm
Height: 1830 mm
Weight: 5600 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Strokes: 19 1/min
Cutting angle: 1.5 °
Number of downholders: 14 pcs.
Back gauge: 1000 mm
Motor power: 15 kW
Oiltank: 200 l
Length: 3700 mm
Width: 2250 mm
Total width with support arm und protection fence: 2700 mm
Height: 1830 mm
Weight: 5600 kg
Max. thickness - mild steel: 6 mm
Strokes: 19 1/min
Cutting angle: 1.5 °
Number of downholders: 14 pcs.
Back gauge: 1000 mm
Motor power: 15 kW
Oiltank: 200 l
Length: 3700 mm
Width: 2250 mm
Total width with support arm und protection fence: 2700 mm
Height: 1830 mm
Weight: 5600 kg
Metal working and machine toolsSanding machinesRoll grinders
Schleifdurchmesser: 1300 mmSchleiflänge: 6100 mmSchleifscheibendurchmesser: 1300 mmSpannung: 400 VAntriebsleistung - Werkstück: 23 kWSpitzenweite: 6500 mmSchleifscheiben-Durchmesser max.: 750 mmGesamtleistungsbedarf: 50 kWMaschinengewicht ca.: 35 tRaumbedarf ca.: m
Schleifdurchmesser: 1300 mm
Schleiflänge: 6100 mm
Schleifscheibendurchmesser: 1300 mm
Spannung: 400 V
Antriebsleistung - Werkstück: 23 kW
Spitzenweite: 6500 mm
Schleifscheiben-Durchmesser max.: 750 mm
Gesamtleistungsbedarf: 50 kW
Maschinengewicht ca.: 35 t
Raumbedarf ca.: m
Schleiflänge: 6100 mm
Schleifscheibendurchmesser: 1300 mm
Spannung: 400 V
Antriebsleistung - Werkstück: 23 kW
Spitzenweite: 6500 mm
Schleifscheiben-Durchmesser max.: 750 mm
Gesamtleistungsbedarf: 50 kW
Maschinengewicht ca.: 35 t
Raumbedarf ca.: m
Metal working and machine toolsAccessories and spare partsFaceplates
Planscheibendurchmesser: 1800 mmDurchlass: 300 mmKonus: 463 mmLochkreis: 380Backenbreite: 100 mmDicke: 200 mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: 590 kgRaumbedarf ca.: . m
Planscheibendurchmesser: 1800 mm
Durchlass: 300 mm
Konus: 463 mm
Lochkreis: 380
Backenbreite: 100 mm
Dicke: 200 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: 590 kg
Raumbedarf ca.: . m
Durchlass: 300 mm
Konus: 463 mm
Lochkreis: 380
Backenbreite: 100 mm
Dicke: 200 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: 590 kg
Raumbedarf ca.: . m
2
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 320 to
Bending length: 3050 mm
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 750 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Motor power: 37 kW
pressing capacity: 320 to
Bending length: 3050 mm
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 750 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Motor power: 37 kW
Bending length: 3050 mm
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 750 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Motor power: 37 kW
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 2550 mm
Max. thickness - mild steel: 2.5 mm
Strokes: 35 1/min
Back gauge: 750 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 2860 mm
Width: 1350 mm
Height: 1200 mm
Weight: 1500 kg
Cutting length: 2550 mm
Max. thickness - mild steel: 2.5 mm
Strokes: 35 1/min
Back gauge: 750 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 2860 mm
Width: 1350 mm
Height: 1200 mm
Weight: 1500 kg
Max. thickness - mild steel: 2.5 mm
Strokes: 35 1/min
Back gauge: 750 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 2860 mm
Width: 1350 mm
Height: 1200 mm
Weight: 1500 kg
Metal working and machine toolsAccessories and spare partsOther
Durchmesser: 630 mmDurchlass: 240 mmKonus: 241 mmFlanschdurchmesser: . mmFlansche: 3Maschinengewicht ca.: . kg
Durchmesser: 630 mm
Durchlass: 240 mm
Konus: 241 mm
Flanschdurchmesser: . mm
Flansche: 3
Maschinengewicht ca.: . kg
Durchlass: 240 mm
Konus: 241 mm
Flanschdurchmesser: . mm
Flansche: 3
Maschinengewicht ca.: . kg
6
Food machinesOther
KMG EMC2 Vibratory conveyor, 2023, stainless vibratory conveyor, internal conveyor dimensions 2400mm x 350mm, with controls, 3Ph
KMG EMC2 Vibratory conveyor, 2023, stainless vibratory conveyor, internal conveyor dimensions 2400mm x 350mm, with controls, 3Ph
5
Food machinesOther
Cox and Plant Vibratory conveyor, Stainless vibratory conveyor, internal conveyor dimensions 1100mm x 300mm, 3Ph
Cox and Plant Vibratory conveyor, Stainless vibratory conveyor, internal conveyor dimensions 1100mm x 300mm, 3Ph
8
Food machinesBakery-, pastry equipmentMixers
Robot Coupe R30 Vertical Cutter Mixer, Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph
Robot Coupe R30 Vertical Cutter Mixer, Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph
5
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 175 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X und R-Achse
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 100
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 10900 kg
pressing capacity: 175 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X und R-Achse
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 100
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 10900 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X und R-Achse
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 100
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 10900 kg
10
Metal working and machine toolsMilling machines
Revs: 65 - 2600 r.p.m.
Taper: ISO 40
Working area: 420 x 220 x 380 mm
Table: 840 x 390 mm
Motor: 2.2 kW
Working table clamping surface: 840 x 390 mm
Rapid feed in all 3 axes: 1000 mm/min
Clamping slots: 5
Width x Distance: 14 x 63 mm
Maximal table load: 200 kg
Travel longitudinal: 420 mm
Travel cross: 220 mm
Travel vertical: 380 mm
Feeds stepless X,Y range: 0 - 600 mm/min.
Feeds stepless Z range: 0 - 600 mm/min.
Horizontal spindle number of rates: 65 - 2600
Distance of spindle axis from frame guide ways: 90 - 310 mm
Vertical spindle number of rates: 65 - 2600
Spindle swivelling: +/- 90° °
Quill travel: 100 mm
Clamping of tools: manuell
Spindle motor: 2 kW
vertical table: 950 x 250 mm
Distance vertical milling spindle - milling table: 90 - 310 mm
Distance horizontal milling spindle - milling table: 100 - 480 mm
Length: 1600 mm
Width: 1700 mm
Height: 2000 mm
Weight: 1145 kg
Revs: 65 - 2600 r.p.m.
Taper: ISO 40
Working area: 420 x 220 x 380 mm
Table: 840 x 390 mm
Motor: 2.2 kW
Working table clamping surface: 840 x 390 mm
Rapid feed in all 3 axes: 1000 mm/min
Clamping slots: 5
Width x Distance: 14 x 63 mm
Maximal table load: 200 kg
Travel longitudinal: 420 mm
Travel cross: 220 mm
Travel vertical: 380 mm
Feeds stepless X,Y range: 0 - 600 mm/min.
Feeds stepless Z range: 0 - 600 mm/min.
Horizontal spindle number of rates: 65 - 2600
Distance of spindle axis from frame guide ways: 90 - 310 mm
Vertical spindle number of rates: 65 - 2600
Spindle swivelling: +/- 90° °
Quill travel: 100 mm
Clamping of tools: manuell
Spindle motor: 2 kW
vertical table: 950 x 250 mm
Distance vertical milling spindle - milling table: 90 - 310 mm
Distance horizontal milling spindle - milling table: 100 - 480 mm
Length: 1600 mm
Width: 1700 mm
Height: 2000 mm
Weight: 1145 kg
Taper: ISO 40
Working area: 420 x 220 x 380 mm
Table: 840 x 390 mm
Motor: 2.2 kW
Working table clamping surface: 840 x 390 mm
Rapid feed in all 3 axes: 1000 mm/min
Clamping slots: 5
Width x Distance: 14 x 63 mm
Maximal table load: 200 kg
Travel longitudinal: 420 mm
Travel cross: 220 mm
Travel vertical: 380 mm
Feeds stepless X,Y range: 0 - 600 mm/min.
Feeds stepless Z range: 0 - 600 mm/min.
Horizontal spindle number of rates: 65 - 2600
Distance of spindle axis from frame guide ways: 90 - 310 mm
Vertical spindle number of rates: 65 - 2600
Spindle swivelling: +/- 90° °
Quill travel: 100 mm
Clamping of tools: manuell
Spindle motor: 2 kW
vertical table: 950 x 250 mm
Distance vertical milling spindle - milling table: 90 - 310 mm
Distance horizontal milling spindle - milling table: 100 - 480 mm
Length: 1600 mm
Width: 1700 mm
Height: 2000 mm
Weight: 1145 kg
5
Food machinesMixing machinery
Electrolux E7BREHMNFX Bratt Pan, Stainless frame, 60L capacity, electric bratt pan, adjustable temperature from 80'C to 300'C, 3Ph
Electrolux E7BREHMNFX Bratt Pan, Stainless frame, 60L capacity, electric bratt pan, adjustable temperature from 80'C to 300'C, 3Ph
8
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Back gauge: 1000 mm
Motor power: 15 kW
Oiltank: 200 l
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3790 mm
Height: 2100 mm
Weight: 7300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Back gauge: 1000 mm
Motor power: 15 kW
Oiltank: 200 l
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3790 mm
Height: 2100 mm
Weight: 7300 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Back gauge: 1000 mm
Motor power: 15 kW
Oiltank: 200 l
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3790 mm
Height: 2100 mm
Weight: 7300 kg
5
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 4900 x 3,4 x 1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 400 x 320 mm
Cutting capacity 45°: round 280 mm, square 240 x 320 mm, rectuangular 260 mm
Cutting capacity 60°: round 180 mm, square 180 x 220 mm, rectangular 180 mm
Working height: 650 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2425 mm
Width: 1050 mm
Height: 1600 mm
Weight: 1250 kg
Saw frame: Double column
Band dimensions: 4900 x 3,4 x 1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 400 x 320 mm
Cutting capacity 45°: round 280 mm, square 240 x 320 mm, rectuangular 260 mm
Cutting capacity 60°: round 180 mm, square 180 x 220 mm, rectangular 180 mm
Working height: 650 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2425 mm
Width: 1050 mm
Height: 1600 mm
Weight: 1250 kg
Band dimensions: 4900 x 3,4 x 1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 400 x 320 mm
Cutting capacity 45°: round 280 mm, square 240 x 320 mm, rectuangular 260 mm
Cutting capacity 60°: round 180 mm, square 180 x 220 mm, rectangular 180 mm
Working height: 650 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2425 mm
Width: 1050 mm
Height: 1600 mm
Weight: 1250 kg
6
Printing machineryPrinting machines
Brand: Heidelberg
Type: OHT Platen / Tiegel
Year: 1980
Serial number: 192618 H
Maximum sheet size: 260 × 380 mm
Maximum printing area: Approximately 260 × 350 mm
Production speed: Up to 5,500 sheets per hour
Specific features:
One of the last-generation models
Original roller-lock system
Automatic sheet feeding and delivery
Heidelberg rotary gripper system
Complete inking unit
Suitable for letterpress printing
Suitable for die-cutting, creasing and perforating
Brand: Heidelberg
Type: OHT Platen / Tiegel
Year: 1980
Serial number: 192618 H
Maximum sheet size: 260 × 380 mm
Maximum printing area: Approximately 260 × 350 mm
Production speed: Up to 5,500 sheets per hour
Specific features:
One of the last-generation models
Original roller-lock system
Automatic sheet feeding and delivery
Heidelberg rotary gripper system
Complete inking unit
Suitable for letterpress printing
Suitable for die-cutting, creasing and perforating
Type: OHT Platen / Tiegel
Year: 1980
Serial number: 192618 H
Maximum sheet size: 260 × 380 mm
Maximum printing area: Approximately 260 × 350 mm
Production speed: Up to 5,500 sheets per hour
Specific features:
One of the last-generation models
Original roller-lock system
Automatic sheet feeding and delivery
Heidelberg rotary gripper system
Complete inking unit
Suitable for letterpress printing
Suitable for die-cutting, creasing and perforating
4
Food machinesMeat processing
Fitzpatrick FASO20 Hammermill, Stainless, Fitzmill hammer mill, 30Kw motor, hammermill 480mm x 300mm, 48 blade assembly, all on stainless frame 3Ph
Fitzpatrick FASO20 Hammermill, Stainless, Fitzmill hammer mill, 30Kw motor, hammermill 480mm x 300mm, 48 blade assembly, all on stainless frame 3Ph
6
Food machinesMeat processing
Fitzpatrick DKAS012 Hammermill Stainless, Fitzmill hammer mill, 15Kw motor, hammermill 300mm x 250mm, then discharges into rotary valve, all on stainless frame 3Ph
Fitzpatrick DKAS012 Hammermill Stainless, Fitzmill hammer mill, 15Kw motor, hammermill 300mm x 250mm, then discharges into rotary valve, all on stainless frame 3Ph
1
Food machinesBakery-, pastry equipmentCutting machines
NNP Bakery racks, Stainless bakery racks, 18 tiers with trays, tray size 18 x 30 inch standard, mobile, 30 in stock
NNP Bakery racks, Stainless bakery racks, 18 tiers with trays, tray size 18 x 30 inch standard, mobile, 30 in stock
5
Food machinesOther
Meyer Vitech Accuflex Vibratory conveyor, Stainless frame and contact parts, 150Kg stainless hopper, vibratory conveyor dimensions 1300mm x 250mm, all mounted on frame, 1Ph
Meyer Vitech Accuflex Vibratory conveyor, Stainless frame and contact parts, 150Kg stainless hopper, vibratory conveyor dimensions 1300mm x 250mm, all mounted on frame, 1Ph
5
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
10
Metal working and machine toolsLathesCenter lathes and spindle lathes
L & Z Drehmaschine / Bickenbach LE-20-10-S incl. 3-Achsdigitalanzeige-Sehr gepflegter Originalzustand aus Bildungseinrichtung-CE - Kennung-Baujahr 2008-Drei Achsendigitalanzeige-Drehdurchmesser 420mm-Umlaufdurchmesser über Bettschlitten 250mm-Drehdurchmesser in der Kröpfung 580mm-Drehlänge 1000mm-Drehzahlbereich (Getriebe) 20 - 2000 U/min-Spindelbohrung 58 mm-Reitstockkonus MK 4 / Pinolenweg 130mm-Röhm Dreibackenfutter 250mm & Wechselbacken-Feststehende Lünette-Multifix Grundhalter & 3x Einsätze-Kühlmitteleinrichtung-Klappbare Schutzeinrichtung für Stahlhalter-Elektrischer Futterschutz-Fußbremse-Schwenkbare Maschinenleuchte-Mitlaufende Spitze (Röhm)-Maschinenfüße-Bettanschlag-Spänerückwand-Not / Aus-BedienwerkzeugAbmaße: LxBxH 2,1x0,8x1,7 Meter / Gewicht 1600Kg
L & Z Drehmaschine / Bickenbach LE-20-10-S incl. 3-Achsdigitalanzeige
-Sehr gepflegter Originalzustand aus Bildungseinrichtung
-CE - Kennung
-Baujahr 2008
-Drei Achsendigitalanzeige
-Drehdurchmesser 420mm
-Umlaufdurchmesser über Bettschlitten 250mm
-Drehdurchmesser in der Kröpfung 580mm
-Drehlänge 1000mm
-Drehzahlbereich (Getriebe) 20 - 2000 U/min
-Spindelbohrung 58 mm
-Reitstockkonus MK 4 / Pinolenweg 130mm
-Röhm Dreibackenfutter 250mm & Wechselbacken
-Feststehende Lünette
-Multifix Grundhalter & 3x Einsätze
-Kühlmitteleinrichtung
-Klappbare Schutzeinrichtung für Stahlhalter
-Elektrischer Futterschutz
-Fußbremse
-Schwenkbare Maschinenleuchte
-Mitlaufende Spitze (Röhm)
-Maschinenfüße
-Bettanschlag
-Spänerückwand
-Not / Aus
-Bedienwerkzeug
Abmaße: LxBxH 2,1x0,8x1,7 Meter / Gewicht 1600Kg
-Sehr gepflegter Originalzustand aus Bildungseinrichtung
-CE - Kennung
-Baujahr 2008
-Drei Achsendigitalanzeige
-Drehdurchmesser 420mm
-Umlaufdurchmesser über Bettschlitten 250mm
-Drehdurchmesser in der Kröpfung 580mm
-Drehlänge 1000mm
-Drehzahlbereich (Getriebe) 20 - 2000 U/min
-Spindelbohrung 58 mm
-Reitstockkonus MK 4 / Pinolenweg 130mm
-Röhm Dreibackenfutter 250mm & Wechselbacken
-Feststehende Lünette
-Multifix Grundhalter & 3x Einsätze
-Kühlmitteleinrichtung
-Klappbare Schutzeinrichtung für Stahlhalter
-Elektrischer Futterschutz
-Fußbremse
-Schwenkbare Maschinenleuchte
-Mitlaufende Spitze (Röhm)
-Maschinenfüße
-Bettanschlag
-Spänerückwand
-Not / Aus
-Bedienwerkzeug
Abmaße: LxBxH 2,1x0,8x1,7 Meter / Gewicht 1600Kg
11
Metal working and machine toolsOther
HAHNDORF Typ SEW 52/300mm / Nutenstoßmaschine-Keilnutenstoßmaschine geeignet zum Stoßen von Innenkeilnuten in Zahnräder/ Riemenscheiben oder Naben.-Stoßlänge Hub max. 300mm-Nutenbreite max. 32mm-Schnittgeschwindigkeit 5 Meter / Minute-Rücklauf ca. 5 Meter / Minute-Planscheiben / Tischdurchmesser ca. 380 x 300 mm-Kleinste Bohrung mit spez. Stoßmesser 6mm-Mit Stößeleinsätzen 20mm-Mit normaler Stoßstange 60mm-Antriebsleistung 1,1 KW-Stoßstange mit Stoßeinsatz-AnschlußkabelAbmaße:LxBxH 1,2x0,6x1,6 Meter / Gewicht 350Kg
HAHNDORF Typ SEW 52/300mm / Nutenstoßmaschine
-Keilnutenstoßmaschine geeignet zum Stoßen von Innenkeilnuten in Zahnräder
/ Riemenscheiben oder Naben.
-Stoßlänge Hub max. 300mm
-Nutenbreite max. 32mm
-Schnittgeschwindigkeit 5 Meter / Minute
-Rücklauf ca. 5 Meter / Minute
-Planscheiben / Tischdurchmesser ca. 380 x 300 mm
-Kleinste Bohrung mit spez. Stoßmesser 6mm
-Mit Stößeleinsätzen 20mm
-Mit normaler Stoßstange 60mm
-Antriebsleistung 1,1 KW
-Stoßstange mit Stoßeinsatz
-Anschlußkabel
Abmaße:
LxBxH 1,2x0,6x1,6 Meter / Gewicht 350Kg
-Keilnutenstoßmaschine geeignet zum Stoßen von Innenkeilnuten in Zahnräder
/ Riemenscheiben oder Naben.
-Stoßlänge Hub max. 300mm
-Nutenbreite max. 32mm
-Schnittgeschwindigkeit 5 Meter / Minute
-Rücklauf ca. 5 Meter / Minute
-Planscheiben / Tischdurchmesser ca. 380 x 300 mm
-Kleinste Bohrung mit spez. Stoßmesser 6mm
-Mit Stößeleinsätzen 20mm
-Mit normaler Stoßstange 60mm
-Antriebsleistung 1,1 KW
-Stoßstange mit Stoßeinsatz
-Anschlußkabel
Abmaße:
LxBxH 1,2x0,6x1,6 Meter / Gewicht 350Kg
9
ForkliftsGas forklifts
Jungheinrich TFG 30 / 316 ZT - GASGABELSTAPLER mit erst 970 Stunden-Baujahr 2006-970 Betriebsstunden-Traghfähigkeit 3000Kg-Gabellänge 115 cm-Guter betriebsbereiter AllgemeinzustandAbmaße:LxBxH 3,9x1,2x2,4 Meter / Gewicht 4810Kg
Jungheinrich TFG 30 / 316 ZT - GASGABELSTAPLER mit erst 970 Stunden
-Baujahr 2006
-970 Betriebsstunden
-Traghfähigkeit 3000Kg
-Gabellänge 115 cm
-Guter betriebsbereiter Allgemeinzustand
Abmaße:
LxBxH 3,9x1,2x2,4 Meter / Gewicht 4810Kg
-Baujahr 2006
-970 Betriebsstunden
-Traghfähigkeit 3000Kg
-Gabellänge 115 cm
-Guter betriebsbereiter Allgemeinzustand
Abmaße:
LxBxH 3,9x1,2x2,4 Meter / Gewicht 4810Kg
11
Metal working and machine toolsLathesOther
L & Z Drehmaschine WEILER CONDOR B incl. Dreiachsdigitalanzeige-CE - Kennung-Maschine aus Bildungseinrichtung / sehr gepflegt-Spitzenhöhe 165mm-Umlaufdurchmesser über Bett 330mm-Umlaufdurchmesser über Planschlitten 185mm-Drehlänge 800mm-Spindeldrehzahlen 22 - 2800 U/min-Automatische / Längs & Planvorschübe-Gewinde / Metrisch / Zoll etc.-Stangendurchlass 40mm-Reitstock / Pinolenaufnahme MK 3-Multifix Grundhalter & Einsätze-Dreibackendutter 200mm-Elektrischer Futterschutz-Spindelschutzabdeckung- 2x Not / Aus-Kühlmitteleinrichtung-Spänerückwand-DokumentationAbmaße: LxBxH 1,8x0,8x1,6 Meter / Gewicht 1200Kg
L & Z Drehmaschine WEILER CONDOR B incl. Dreiachsdigitalanzeige
-CE - Kennung
-Maschine aus Bildungseinrichtung / sehr gepflegt
-Spitzenhöhe 165mm
-Umlaufdurchmesser über Bett 330mm
-Umlaufdurchmesser über Planschlitten 185mm
-Drehlänge 800mm
-Spindeldrehzahlen 22 - 2800 U/min
-Automatische / Längs & Planvorschübe
-Gewinde / Metrisch / Zoll etc.
-Stangendurchlass 40mm
-Reitstock / Pinolenaufnahme MK 3
-Multifix Grundhalter & Einsätze
-Dreibackendutter 200mm
-Elektrischer Futterschutz
-Spindelschutzabdeckung
- 2x Not / Aus
-Kühlmitteleinrichtung
-Spänerückwand
-Dokumentation
Abmaße: LxBxH 1,8x0,8x1,6 Meter / Gewicht 1200Kg
-CE - Kennung
-Maschine aus Bildungseinrichtung / sehr gepflegt
-Spitzenhöhe 165mm
-Umlaufdurchmesser über Bett 330mm
-Umlaufdurchmesser über Planschlitten 185mm
-Drehlänge 800mm
-Spindeldrehzahlen 22 - 2800 U/min
-Automatische / Längs & Planvorschübe
-Gewinde / Metrisch / Zoll etc.
-Stangendurchlass 40mm
-Reitstock / Pinolenaufnahme MK 3
-Multifix Grundhalter & Einsätze
-Dreibackendutter 200mm
-Elektrischer Futterschutz
-Spindelschutzabdeckung
- 2x Not / Aus
-Kühlmitteleinrichtung
-Spänerückwand
-Dokumentation
Abmaße: LxBxH 1,8x0,8x1,6 Meter / Gewicht 1200Kg