Rijkaart Flighted elevator conveyor, 2022, Stainless, belt width 400mm, elevates from 800mm to 1600mm, mobile, 3Ph

KMG EMC2 Vibratory conveyor, 2011, Stainless vibratory conveyor, 1600mm L, discharge chute 300mm, 3Ph

NNP Stainless conveyor, Stainless conveyor, belt dimensions 1600mm x 300mm, 3Ph

pressing capacity: 30 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Daylight: 920 mm
Distance between columns: 900 mm
Working speed: max. 9 mm/s
Length: 1600 mm
Width: 700 mm
Height: 2050 mm
Weight: 430 kg

pressing capacity: 85 to
Stroke: 500 mm
Ram: 700x400 mm
Table: 800x600 mm
Daylight: 600 mm
Throat depth: 300 mm
Rapid speed: 105 mm/s
Reduced speed: 41 mm/s
Working speed: 7 mm/s
Retraction speed: 58 mm/s
Motor: 7.5 kW
Length: 1200 mm
Width: 1600 mm
Height: 2500 mm

Shrink tunnel, mesh conveyor, adjustable temperature and speed controls, aperture 400mm L x 220mm H, overall length 1600mm, mobile, 3Ph

Faceplate diameter: 1400 mm
Swing diameter: 1600 mm
Turning height: 1500 mm
Control: Siemens
Type: 840D
Workpiece weight: 6500 kg
Support displacement vertical: 1000 mm
Speed: 10-315 rpm
Feed: 3600mm/min
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar

Measurements and weight
Machine weight: 13500 kg

Robot
Producer: Wittman
Type: W743
Year: 2009

Further information:
ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology

The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility.

Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system.

⸻

🔍 Advantages of the ENGEL Victory Series

✔ Tie-Bar-Less Design

The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction.

This system offers several important advantages:

• Larger moulds can be installed easily
• Easier access for complex mould geometries
• Reduced mould changeover times
• Easier robot integration
• More efficient use of production space

This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications.

⸻

✔ Wittmann Robot Integration

The machine has been operated together with a Wittmann robot.

Robot specifications:

• Wittmann W743-0424
• Year of manufacture: 2009
• Payload capacity: 25 kg
• X-axis: 1200 mm
• Y-axis: 1600 mm
• Z-axis: 4000 mm

This configuration provides major advantages for automated production processes.

⸻

🔍 Machine Operating System

The ENGEL Victory Tech series operates with a servo-hydraulic system.

✔ Hydraulic System:

• Clamping unit
• Injection movements
• Ejector system
• Mould movements

are driven by a high-performance hydraulic system.

✔ Thanks to the servo-controlled hydraulic system:

• Only the required amount of energy is consumed
• Power consumption is significantly reduced
• Quieter operation is achieved
• Production stability is improved

Unlike older conventional hydraulic machines, the machine does not run continuously at full power.

The servo pump system operates only when needed, providing the following advantages:

• Lower energy costs
• Reduced heat generation
• Longer component lifetime
• More stable processing conditions

x-travel: 3500 mm
y-travel: 1600 mm
z-travel: 900 mm
Speed: 20-2000 rpm
Spindle mount ISO: SK50
Table dimension: 5000x1000 mm
Control: Heidenhain TNC 426
Spindle drive motor: 22 kW
Rapid traverse: 5000 mm/min
Machine weight approx.: 16 t

Revs: 65 - 2600 r.p.m.
Taper: ISO 40
Working area: 420 x 220 x 380 mm
Table: 840 x 390 mm
Motor: 2.2 kW
Working table clamping surface: 840 x 390 mm
Rapid feed in all 3 axes: 1000 mm/min
Clamping slots: 5
Width x Distance: 14 x 63 mm
Maximal table load: 200 kg
Travel longitudinal: 420 mm
Travel cross: 220 mm
Travel vertical: 380 mm
Feeds stepless X,Y range: 0 - 600 mm/min.
Feeds stepless Z range: 0 - 600 mm/min.
Horizontal spindle number of rates: 65 - 2600
Distance of spindle axis from frame guide ways: 90 - 310 mm
Vertical spindle number of rates: 65 - 2600
Spindle swivelling: +/- 90° °
Quill travel: 100 mm
Clamping of tools: manuell
Spindle motor: 2 kW
vertical table: 950 x 250 mm
Distance vertical milling spindle - milling table: 90 - 310 mm
Distance horizontal milling spindle - milling table: 100 - 480 mm
Length: 1600 mm
Width: 1700 mm
Height: 2000 mm
Weight: 1145 kg

Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg

pressing capacity: 150 to
Stroke: 500 mm
Ram: 950 x 650 mm
Table: 1200 x 750 mm
Daylight: 750 mm
Rapid speed: 100 mm/s
Working speed: 5 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Working pressure: 254 bar
Die cushion pressing force: 32 to
Die cushion stroke: 200 mm
Table Drill Ø: 120 mm
Draw cushion working pressure: 160 bar
Draw cushion retraction speed: 40 mm/sec.
Draw cushion surface: 720x540 mm
Length: 2200 mm
Width: 2200 mm
Height: 3650 mm
Weight: 9500 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6800 kg

pressing capacity: 40 to
Cylinder fix or moveable: fix
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 900 mm
Rapid speed: 29 mm/s
Working speed: 4 mm/s
Length: 1600 mm
Width: 1000 mm
Height: 2350 mm
Weight: 790 kg

pressing capacity: 150 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1400 mm
Hydraulicaly movable stand: 1600 mm
Length: 2900 mm
Width: 2500 mm
Height: 2500 mm
Weight: 5200 kg

Drilling capacy mild steel: 65 mm
Taper: MK 5
Distance spindle - column: 440 – 1.580 mm
Revs: 40 – 1.920 (12) r.p.m.
Tapping capacity: Steel/Cast: M50/M60
Distance table - spindle underside: 380 – 1.600 mm
automatic feed: 0,07 – 0,96 (6) mm/min
Spindle motor: 5.5 kW
Column diameter: 432 mm
Quill travel: 370 mm
Table: 2.480 x 1.050 x 210 mm
Elvating motor: 1 kW
Box table dimensions: 700 x 500 x 400 mm
max. height: 3170 mm
Length: 2850 mm
Width: 1400 mm
Height: 2940 mm
Weight: 4600 kg

Drilling capacy mild steel: 50 mm
Taper: MK 5
Distance spindle - column: 350 – 1.600 mm
Revs: 56 – 1.450 (12) r.p.m.
Tapping capacity: Steel/Cast: M40/M50
Distance table - spindle underside: 465 – 1.420 mm
automatic feed: 0,06 – 0,2 (3) mm/min
Spindle motor: 3.7 kW
Column diameter: 320 mm
Quill travel: 270 mm
Table: 2.550 x 970 x 200 mm
Elvating motor: 1 kW
Box table dimensions: 630 x 500 x 500 mm
max. height: 2760 mm
Length: 2670 mm
Width: 1120 mm
Height: 2410 mm
Weight: 3300 kg

pressing capacity: 200 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1900 mm
Piston diameter: 320x210 mm
Working speed: 5 mm/s
Retraction speed: 20 mm/s
Length: 2460 mm
Width: 1600 mm
Height: 2700 mm
Weight: 4800 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2430 mm
Weight: 1600 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2500 mm
Width: 1000 mm
Height: 2200 mm
Weight: 1600 kg

Shaft diameter: 80
Rolls diameter: 245 mm
Driven rolls: 3
Motor power: 4 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm
UPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mm
UPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mm
Length: 1450 mm
Width: 1000 mm
Height: 1400 mm
Weight: 1700 kg

Shaft diameter: 60
Upper roll diameter: 215 mm
Lower roll diameter: 215 mm
Driven rolls: 3
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mm
Square bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mm
Round bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mm
Tube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm
Form tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm
Length: 1000 mm
Width: 1400 mm
Height: 1650 mm
Weight: 950 kg

Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good

mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use

Plattenlänge: 4500 mm
Plattenbreite: 1600 mm
Plattenhöhe: 380 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Plattenlänge: 4500 mm
Plattenbreite: 1600 mm
Plattenhöhe: 370 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Druck: 1645 t
Hub: 1000 mm
Einbauhöhe: 3000 mm
Senkgeschwindigkeit: 280 mm/sec
Rückzugsgeschwindigkeit: 275/346 mm/sec
Ständerweite: 2520 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t

Tragkraft: 1600 kg
Antriebsart: Diesel
Motor: Deutz
Gewicht: 13,6 t

Schleiflänge: 5000 mm
Schleifbreite: 2500 mm
Werkstückhöhe: 1600 mm
Ständerdurchgang: 2680 mm
Durchgangshöhe: 1720 mm
Tischfläche: 5500x2240 mm
T-Nuten - Abstand: 250 mm
T-Nuten - Breite: 36H12 mm
T-Nuten: 9
Werkstückgewicht: 50.000 kg
Tischgeschwindigkeit -stufenlos-: 1-40 m/min
Schleifscheiben-Antrieb: 22 kW
Drehzahl: 960 U/min
Gesamtleistungsbedarf: 146 kW
Maschinengewicht ca.: 140 t
Raumbedarf ca.: 17,5x10,5x6,6 m

Druck: 500 t
Ständerweite: 1600 mm
Hub: 60 mm
Stößelhub - max.: 60 1 / min
Stößelverstellung: 100 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 40 t
Raumbedarf ca.: m

x-Weg: 1600 mm
y-Weg: 920 mm
z-Weg: 900 mm
Tischfläche: 1800x700 mm
T-Nuten - Abstand: 120 mm
Tischbelastung: 3000 kg
Spindelaufnahme ISO: 50
Antriebsleistung: 22/30 kW
Spindeldrehzahlen: 60-3000 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: 1600 mm
y-Weg: 700 mm
z-Weg: 850 mm
Steuerung: Heidenhain TNC 407
Aufnahme ISO: 50
Tischabmessung: 1950 x 650 mm
Werkstückspindel-Drehzahlen: 80 - 3000 U7min
Spannung: 400 V
Gesamtleistungsbedarf: 23 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: 6000 mm
y-Weg: 1670 mm
z-Weg: 1050 mm
Spindelaufnahme ISO: 50
Steuerung: Heidenhain
Tischabmessung: 8000x1030 mm
Tischhöhe: 765 mm
Spindelmotor: 22 kW
Spindeldrehzahlen: 16-1600 U/min
Vorschub: 5-2500 mm/min
Eilgang: 7500 m/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 20 t
Raumbedarf ca.: m

x-Weg: 16300 mm
y-Weg: 2600 mm
z-Weg: 1600 mm
Steuerung: Heidenhain
Typ: TNC 430
Werkzeugaufnahme: ISO 50
Spindeldrehzahlen: 22-4000 U/min
Vorschubbereich x - Richtung: 36000 mm/min
Vorschubbereich y - Richtung: 24000 mm/min
Vorschubereich z-Richtung: 24000 mm/min
Hauptantriebsmotor: 37 kW
Werkzeugwechsler: 90
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: 1350 mm
y-Weg: 650 mm
z-Weg: 650 mm
Steuerung: Heidenhain
Typ: TNC 426
Kopf schwenkbar +/-: 90 °
Spindelaufnahme ISO: 40
Tischfläche: 1600x800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: 1600
y-Weg: 1300 mm
z-Weg: 1450 mm
Steuerung: Siemens 840C
Werkzeugwechsler: 100 Pos
Spindeldrehanzahl: 10-4000U/min
Werkzeugaufnahme: Iso50
A-Achse: -100°/+10°
c-Achse: 360.000° 0
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Spindeldurchmesser: 102 mm
x-Weg: 1600 mm
y-Weg: 1200 mm
z-Weg: 1500 mm
w-Achse: 700 mm
Tischabmessung: 1250x1400 mm
Spindeldrehanzahl: 8-1600
Steuerung: Heidenhain TNC 131
Gesamtleistungsbedarf: 15 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Spindeldurchmesser: 150 mm
x-Weg: 4200 mm
y-Weg: 3000 mm
Traghülsenabmessung: 380x380 mm
Traghülse: Horizontalbewegung: 500 mm
Spindelweg: 1200 mm
Planschieberdurchmesser: 780 mm
Planschieberweg: 250 mm
Bohrwerksdrehtisch:: Defum
Typ: S-1600
Tischabmessung: 1500x1500 mm
Tischweg: 1100 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Spindeldurchmesser: 150 mm
x-Weg: 16000 mm
y-Weg: 3000 mm
Aufnahme ISO: 50
w-Achse: 1200 mm
Gesamtleistungsbedarf: 30 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 2500 mm
Umlaufdurchmesser: 3200 mm
Drehhöhe: 3100 mm
Steuerung: R&D
Typ: MTC 2x-2
Werkstückgewicht: 20000 kg
Supportverstellung: 1600 mm
Seitensupport - Horizontalverstellung: 1000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 1600 mm
Umlaufdurchmesser: 2100 mm
Drehhöhe: 1700 mm
Steuerung: R & D
Typ: MTC 4
Drehzahl: 280 U/min
Werkstückgewicht: 20000 kg
Werkzeugwechsler: 14 Pos.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 2800 t
Raumbedarf ca.: 3,7x3,75x5,1 m

Drehdurchmesser: 580 mm
Drehlänge: 1600 mm
Steuerung: Siemens 810 T
Drehdurchmesser über Support: 320 mm
Spindeldurchlass: 85 mm
Drehzahl: 12,5-4000 U/min
Getriebestufen: 4
Dreibackenfutter Forckrath: 315 mm
Lünette: 170 mm
Gesamtleistungsbedarf: 53 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Stainless frame, elevates from 600mm to 1600mm, side guides, belt width 300mm, mobile, 3Ph

Stainless frame, twin lane, lane width 125mm, overall length 1600mm, 3Ph, mobile

AFT buttering machine, Stainless frame, twin lane, lane width 125mm, overall length 1600mm, 3Ph, mobile

Stainless frame, overall length 1600mm, weigh platform 440mm x 300mm, weighs from 100g - 500g, pneumatic blow reject into reject bin, 3Ph

Stainless frame, overall belt dimensions 1600mm x 900mm, made up of 18mini belts 50mm width, 0.37Kw motors, 3Ph

Stainless frame, twin lane, lane width 125mm, with batch counter, overall length 1600mm, 3Ph, mobile

Stainless frame, belt dimensions 1700mm x 780mm, belt height 1600mm, stainless side giudes, mobile, 3Ph