Hydrovane HV04 air compressor, Serial: 504020750, 2019, 4Kw, Max Bar 11, RPM 1455, 3Ph, comes with receiver and BEKO drypoint RA dryer,

Jungheinrich EJCM10 Electric pallet truck, Serial: F5004035, 2022, electric pallet truck, max lift height 1540mm, length of forks 1150mm, mobile, 1Ph to charge

Univap TCM/E 5ED Evaporator with electric defrost unit, 2021 Evaporator with electric defrost unit, comes with controls and external KD external fridge plant

Italia refrigerazional SRL Low Noise condensing unit, Four fan system, condensing unit, 3Ph

Flowtech Flowboost 2V JH1 water pump system with tanks, 2023, Two station pump unit with flow meters, 0.9Kw rating per pump

ICS IC538 Water chiller, Serial: 38178801097 2017, Water chiller, 42Kw, Refrigerant R410A, 3Ph

Ref. no.: 18395
Hersteller: DEMAG
Year of construction: 2007

Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 X 500 mm
Mould height min.: 250 mm
Mould height max.: 560 mm
Platen size (h x v): 750 X 750 mm

Injection unit
Screw diameter: 40 mm
Injection volume: 255 cm³
Shot weight: 230 g
Injection pressure: 2418 bar

Measurements and weight
Dimensions: 5,2 X 1,6 X 2,1 m
Machine weight: 7500 kg

Robot
Producer: Wittmann
Type: W711-1776 (doppelter x-Greifer)
Year: 2008

Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg

Swing over bed: 570 mm
Distance between centers: 2000 mm
Centre height: 280 mm
Spindle bore: 62 mm
swing over cross slide: 365 mm
Width of bed: 360 mm
Spindle nose / DIN55027: DIN55022 Größe 8
Spindle speed steps: 24
Spindle revs: 11,2 - 2240 rpm
Number of feeds: 60
Longitudinal feed range: 0.063 - 56 mm/r
Cross feed range: 0.032 - 28 mm/r
Number of threads: 60
Metric thread range: 0.25 - 224 mm
Cross slide travel: 345 mm
Top slide travel: 125 mm
Tailstock quill diameter: 80 mm
Tailstock quill taper: 5 MK
Tailstock travel: 190 mm
Motor power: 15 kW
Length: 4500 mm
Width: 1440 mm
Height: 1382 mm
Weight: 3000 kg

Anritsu SV Checkweigher, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph

NNP Stainless conveyor, Stainless, intralox belt, belt dimensions 1100mm x 220mm, side guides, 0.37Kw, 3Ph

Doyon AEF035 Spiral mixer, Serial: 795, 2008, Spiral mixer, 70Kgs, adjustable speed, with timer, 3.2Kw, 3Ph

Hovmand Inox 200M3 Lifter, 2015, stainless lifter, previously used for lifting and tipping a bowl, control pad, mobile, 1Ph

Stainless conveyor, Stainless conveyor, belt dimensions 2500mm x 280mm, elevates from 300mm to 1200mm, mobile

Rademaker Stainless conveyor, 2012, Stainless, belt dimensions 3450mm x 850mm, mobile, 3Ph

Cutting length: 1250 mm
Max. thickness - mild steel: 1.5 mm
Back gauge: 500 mm
Length: 2250 mm
Width: 1000 mm
Height: 1150 mm
Weight: 460 kg

Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m

The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.

Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008

Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm

Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar

Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m

pressing capacity: 400 to
Stroke: 500 mm
Table: 5.000 x 3.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 3050 mm
Horizontal movable cylinder: 2.2 mm
Hydraulicaly movable stand: 3.6 mm
Length: 4500 mm
Width: 5000 mm
Height: 2600 mm
Weight: 24000 kg

Max. thickness - mild steel: 2 mm
Throat depth: 700 mm
Motor: 1 kW
Speed: 7 m/min
min / max diameter: 120 / 1.000 mm
gap on blade side: 280 mm
Length: 1400 mm
Width: 400 mm
Height: 1150 mm
Weight: 360 kg

x-Weg: 1150 mm
y-Weg: 350 mm
z-Weg: 500 mm
Tischfläche: 1500x380 mm
Drehzahl: 42-1400 U/min
Spindelaufnahme ISO: 50
Bohrhub: 110 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 2,6 t
Raumbedarf ca.: m

Drehdurchmesser: 1020 mm
Drehlänge: 4000 mm
Drehdurchmesser über Support: 720 mm
Steuerung: Siemens
Typ: 805
Reitstock-Pinolenaufnahme MK: 6
Getriebestufen: 2
Drehzahl: U/min
Bettbreite: 560 mm
Spindelbohrung: 200 mm
Werkstückgewicht: kg
Planscheibe: 1000 mm
Fabrikat: Forkhardt PSA 1000
Dreibackenfutter Forckrath: 500 mm
Lünette: 500 mm
Gesamtleistungsbedarf: KVA
Maschinengewicht ca.: t
Raumbedarf ca.: 7,4x2,5x2,5 m

Länge: 2000 mm
Breite: 1600 mm
Tiefe: 1000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Plattenlänge: 6000 mm
Plattenbreite: 2000 mm
Plattenhöhe: 320 mm
T-Nuten - Breite: mm
T - Nutenabstand: mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8 t
Raumbedarf ca.: m

Bauer -Vertikalbandsäge<br /><br /> <br /><br />Baujahr 2015<br /><br />Sägebandabmessung 3400x20x0,9mm<br /><br />Tischgrösse 625x585mm<br /><br />Arbeitstisch schwenkbar<br /><br /> <br /><br />Abmaße:LxBxH 1,2xo,6x2Meter / Gewicht 450Kg

KROMAS VM 200 / TROCKNER

-Schaltschrank / Timer / Ein-Aus
-Fassungsvermögen 200 Liter
-Heizung / Neu
Clv9Mbquf0
-Motor wurde überholt

Abmaße:
LxBxH 1,3x1,3x1,5 Meter / Gewicht 450Kg

Ref. no.: 18244
Hersteller: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 200 ton
Opening stroke: 575 mm
Distance between tie bars: 580 X 580 mm
Mould height min.: 340 mm
Mould height max.: 790 mm
Opening width: 1365 mm
Platen size (h x v): 860 X 860 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 442 cm³
Shot weight: 400 g
Injection pressure: 1946 bar

Measurements and weight
Dimensions: 5,4 X 1,7 X 2,1 m
Machine weight: 8200 kg

Perfecta 115 TS

Touch screen
Chromed table
Big Side tables
Autotrim, not working

deal for sheets such as paper, cardboard or even films and foils, rubber, leather, sandpaper and many other materials in stacks or individually. In addition to their outstanding mechanical basic concept, user-friendly operation and high safety standards are important features of the Perfecta high-speed cutters. Used worldwide, Perfecta products are not only used as individual machines, but are also integrated into cutting systems

The PERFECTA Cutpit offers special convenience for processing different cutting jobs. Depending on the nature and extent of the work to be done, the user can choose between three different operating modes. As a central control element, the user interface of the touch screen can thus be adapted to individual needs. Clearly understandable symbols make operation of the machine simple and intuitive. All work processes before, during and after cutting can be centrally monitored and evaluated. This guarantees you a smooth and efficient workflow and is an essential part of an economical production process.

The slotless PERFECTA cutting table allows smooth stock handling and prevents the accumulation of paper dust or debris in the mechanical system. Its anti-corrosion stainless steel coated surface protects the machine from wear and damage.

The ServoDrive PERFECTA guarantees precise positioning of the cutting material thanks to a servo-controlled linear backgauge drive system.

Cutting length: 1530 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 12 mm
Strokes: 7 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 22.5 kW
Oiltank: 250 l
Table height: 950 mm
Length: 2350 mm
Width: 1400 mm
Height: 2000 mm
Weight: 5200 kg

Cutting length: 1280 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 12 mm
Strokes: 8 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 22.5 kW
Oiltank: 250 l
Table height: 950 mm
Length: 2100 mm
Width: 1400 mm
Height: 2000 mm
Weight: 5000 kg

Cutting length: 1530 mm
Max. thickness - mild steel: 12 mm
Max. thickness - stainless steel: 9 mm
Strokes: 8 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 15 kW
Oiltank: 180 l
Table height: 950 mm
Length: 2200 mm
Width: 1200 mm
Height: 1800 mm
Weight: 3400 kg

Cutting length: 1280 mm
Max. thickness - mild steel: 12 mm
Max. thickness - stainless steel: 9 mm
Strokes: 9 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 15 kW
Oiltank: 180 l
Table height: 950 mm
Length: 1950 mm
Width: 1200 mm
Height: 1800 mm
Weight: 3200 kg

Cutting length: 1030 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg

Cutting length: 1030 mm
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg

Cutting length: 1030 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg

Cutting length: 6080 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2,5 °
Number of downholders: 29 pcs.
Pressure of downholder: 58 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 400 l
Support arms: 6 pcs.
Table height: 950 mm
Table width: 650 mm
Table length: 6375 mm
Length: 7400 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2900 mm
Weight: 33820 kg

Cutting length: 6080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg

Cutting length: 3080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 20 1/min
Cutting angle: 0,5 - 2 °
Number of downholders: 16 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 11 kW
Oiltank: 125 l
Support arms: 3 pcs.
Table height: 820 mm
Table width: 494 mm
Table length: 3280 mm
Length: 4100 mm
Width: 2050 mm
Total width with support arm und protection fence: 3650 mm
Height: 1950 mm
Weight: 7980 kg

Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg

Cutting length: 150 mm
Max. thickness - mild steel: 6 mm
Length: 290 mm
Width: 90 mm
Height: 560 mm
Weight: 14 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7.5 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg

Cutting length: 4100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg

Cutting length: 4100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg

Max. thickness - mild steel: 4 mm
Throat depth: 200 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Motor: 2.2 kW
Revs: 16 1/min
Length: 1700 mm
Width: 570 mm
Height: 1200 mm
Weight: 500 kg

Max. thickness - mild steel: 2.5 mm
Throat depth: 160 mm
Tools: 4 pcs.
Rolls diameter: 96 mm
Motor: 1.5 kW
Revs: 16 1/min
Length: 1400 mm
Width: 550 mm
Height: 1120 mm
Weight: 380 kg

Max. thickness - mild steel: 1.2 mm
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 7 pcs.
Rolls diameter: 62 mm
Length: 560 mm
Width: 220 mm
Height: 500 mm
Weight: 50 kg

Max. thickness - mild steel: 0.8 mm
Throat depth: 80 mm
Shaft length: 110 mm
Tools: 7 pcs.
Rolls diameter: 52 mm
Length: 380 mm
Width: 180 mm
Height: 380 mm
Weight: 30 kg