Tube diameter: 3/4" 26,9 mm, 1" 33,7 mm, 1¼" 42,4 mm, 1½" 48,3 mm, 2" 60,3 mm
Max. wall thickness: 5 mm
Max. wall thickness stainless steel: 3 mm
Weight: 87 kg

Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg

Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °

Bending length: 1050 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg

Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 14 mm
Bevel angle: 30 °
Spindle speed (load-free): 9 rpm
Plate thickness: 6 - 40 mm
Min. plate width: 55 mm
Min. tube inner diameter: 100 mm
Feed speed: 2600 mm/min
Motor: 2.2 kW
Length: 589 mm
Width: 541 mm
Height: 320 mm
Weight: 65 kg

Wookil WTNS 1700 semi automatic die cutting machine

Year 2000
Max size 1200x 1700 mm
Min size: 600 x 850 mm
Max pressure 350 tons

Polar 92 EMC monitor

Chrome table with air
2 x 1m2 resopal side tables with air.

Polar 92 EMC monitor.

Snijbreedte: 92 cm
Chrome air table
Complete with tools and spare knife

Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997

Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar

Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg

Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006

Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm

Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar

Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg

Ref. no.: 18138
Hersteller: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm

Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar

Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg

Ref. no.: 18092
Hersteller: ENGEL
Year of construction: 2001

Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm

Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar

Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg

Ref. no.: 17514
Hersteller: BILLION
Year of construction: 2011

Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar

Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg

Additional information & extras
Hot runner systems: 6 pcs.

Ref. no.: 17507
Hersteller: DEMAG
Year of construction: 1998

Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar

Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg

Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005

Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm

Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar

Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg

punch set

Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function

Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg

complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.

Working Area: 560 x 400 x 32 mm

Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100

Rotary table: 360 °
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good

Weight of machine: 11 kg
Condition: very good

Size C, Location hole for Multifix on the support, diameter 23 mm

Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good

measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm

Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good


Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest

Total power: 6,5 - 12 kW
Weight of machine: 160 kg
Space requirement (W x D x H): 0,9 x 0,8 x 1,1 m
Condition: good working condition

arm 350 mm, with cooling, welding time adjustable, U = 1,2 - 2,2, Fr. 50, input one phase 220 V, I = 29 A

Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m

semi-automatic operation, robust machine, good condition, ready to use

Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good

semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply

Accessory: 18 saw blades, roller conveyor 2 m

Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good

maintained vibration meter

X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation

under power, ready for inspection

Accessory: docmentation

Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m

Separate control device for the chuck clamping

Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m

well-maintained machine ready for immediate use

Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25

Weight of machine: 170 kg

Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm

Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m

Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm

Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good

fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation

Accessory: 2 saw blades

Suction tube: diameter 150 mm

2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension

Power: 2.000
Generator type: Newage Stamford HC.74H
Motor type: Mitsubishi S16-R-PTA2
Voltage: 50 Hz - 400 V
Tank capacity: no fuel tank ltr
Container (W x D x H): 4,8 x 1,7 x 2,5
Working hour: 549 h
Weight of machine: 13.000 kg
Condition: very good

without exhaust system, without starter battery

Swing diameter over bed: 490 mm
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h

without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027

Accessory: Documentation, suction, no other accessories

Power: 1.250 / 1.000
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good

Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).

Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good

for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new

Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good

well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37

Accessory: documentation

Total power: 1,4 kW
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m

for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar

Accessory: without extraction function

Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good

well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37

Accessory: documentation

Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good

well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37

Accessory: documentation

X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect

Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1

Accessory: cooling unit

Power: 2.071 / 1.641
Generator type: Stamford PI734F1
Motor type: Mitsubishi
Voltage: 50 Hz - 400 V
Battery voltage: 24
Tank capacity: 2.000 ltr
Container (W x D x H): 12,3 x 2,45 x 3,2
Working hour: 181 h
Weight of machine: 23.000 kg
Condition: very good

Power: 1130 / 904
Motor type: MTU V18 Bi Turbo Diesel
Speed: 1500 rpm
Voltage: 50 Hz - 230 / 400 V
Tank capacity: 800 ltr
Working hour: 116 h
Condition: very good

Documentation, heat exchanger, batteries, soundproof hood

V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW

Power: 3300 / 3000
Generator type: C175-16 SCAC, V16
Motor type: C175-16 SCAC, V16
Speed: 1.500 rpm
Voltage: 50 Hz - 400 / 230 V
Control: EMCP 4.2B
Battery voltage: 24
Container (W x D x H): 7,9 x 2,8 x 3,3
Working hour: 373 h
Weight of machine: 23000 kg
Condition: very good

Turning diameter: 250 mm
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good

Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used

Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm

Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good

Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m

Accessory: no further accessories

Product witdh: 45 - 400 mm
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m

System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film