Please wait...

5
Lathes

Centre lathe ZMM CU 325

ZMM CU 325
Swing over bed: 325 mm Distance between centers: 1000 mm Centre height: 165 mm Spindle bore: 32 mm swing over cross slide: 190 mm Width of bed: 200 mm Spindle nose / DIN55027: 5 Spindle taper: 4 M Spindle speed steps: 12 Spindle revs: Array rpm Number of feeds: 48 Longitudinal feed range: 0.006 - 1.77 mm/r Cross feed range: 0.003 - 0.885 mm/r Metric thread range: 0.1 - 28 mm Inch thread range: Array Tpi Module thread range: 0.1 - 1.75 DP thread range: Array Cross slide travel: 150 mm Top slide travel: 95 mm Tailstock quill diameter: 40 mm Tailstock quill taper: 3 MK Tailstock travel: 100 mm Motor power: 2.2 kW Length: 2150 mm Width: 950 mm Height: 1350 mm Weight: 770 kg
Swing over bed: 325 mm
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg
5
Sheet metal working machinesSection steel shears

CNC positioning system GEKA Semipaxy 1000x400 mm B&R 15&

GEKA Semipaxy 1000x400 mm B&R 15"
X-axis: 1000 mm Y-axis: 400 mm Positioning speed: 12 m/min Weight: 300 kg
X-axis: 1000 mm
Y-axis: 400 mm
Positioning speed: 12 m/min
Weight: 300 kg
1
Sheet metal working machinesSection steel shears

Steelworker GEKA C2PL 65

GEKA C2PL 65
Punching power: 170 ton Min. angle steel: 40x40x4 mm Max. angle steel: 65x65x7 mm Amount of punching units: 2 Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm Cutting power: 350 to Motor: 5 kW Max. pressure: 265 bar Oiltank: 70 l
Punching power: 170 ton
Min. angle steel: 40x40x4 mm
Max. angle steel: 65x65x7 mm
Amount of punching units: 2
Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm
Cutting power: 350 to
Motor: 5 kW
Max. pressure: 265 bar
Oiltank: 70 l
1
Sheet metal working machinesSection steel shears

Steelworker GEKA HYD 80 SD

GEKA HYD 80 SD
Punching power: 80 ton Throat depth: 500 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm Stroke: 70 mm Strokes: 40 1/min Flat steel: 450x15 / 300x20 mm Angle steel: 130x130x13 mm Round / square steel: 45 mm Notcher: 12x52x90 mm Motor: 9 kW Length: 2310 mm Width: 1200 mm Height: 2050 mm Weight: 2400 kg
Punching power: 80 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg
5
Sheet metal working machinesSection steel shears

Steelworkers GEKA HYD 80 S

GEKA HYD 80 S
Punching power: 80 ton Throat depth: 300 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm Stroke: 70 mm Strokes: 40 1/min Flat steel: 450x15 / 300x20 mm Angle steel: 130x130x13 mm Round / square steel: 45 mm Notcher: 12x52x90 mm Motor: 9 kW Length: 2310 mm Width: 1200 mm Height: 2050 mm Weight: 2070 kg
Punching power: 80 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg
3
Sheet metal working machinesSection steel shears

Steelworker GEKA HYD 55 SD

GEKA HYD 55 SD
Punching power: 55 ton Throat depth: 500 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm Stroke: 20 mm Strokes: 37 1/min Flat steel: 300x15 / 200x20 mm Notcher: 10x42x90 mm Motor: 5 kW Length: 2100 mm Width: 1160 mm Height: 2090 mm Weight: 1750 kg
Punching power: 55 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
1
Sheet metal working machinesSection steel shears

Steelworker GEKA Microcrop

GEKA Microcrop
Punching power: 36 ton Throat depth: 170 mm Number of stations: 3 Max. diameter at sheet thickness (mild steel): 27x10 mm Stroke: 15 mm Strokes: 24 1/min Flat steel: 350x6 mm Angle steel: 80x8 mm Motor: 2.2 kW Length: 1100 mm Width: 800 mm Height: 1400 mm Weight: 485 kg
Punching power: 36 ton
Throat depth: 170 mm
Number of stations: 3
Max. diameter at sheet thickness (mild steel): 27x10 mm
Stroke: 15 mm
Strokes: 24 1/min
Flat steel: 350x6 mm
Angle steel: 80x8 mm
Motor: 2.2 kW
Length: 1100 mm
Width: 800 mm
Height: 1400 mm
Weight: 485 kg
1
Sheet metal working machinesSection steel shears

CNC positioning system GEKA ALRS 600

GEKA ALRS 600
X-axis: 6000 mm Min. flat steel width: 40 mm Max. flat steel length: 6000 mm Max. flat steel weight: 600 kg Min. rest piece length: 180 mm
X-axis: 6000 mm
Min. flat steel width: 40 mm
Max. flat steel length: 6000 mm
Max. flat steel weight: 600 kg
Min. rest piece length: 180 mm
3
Sheet metal working machinesSection steel shears

Steelworker GEKA BENDICROP 85 SD

GEKA BENDICROP 85 SD
Punching power: 85 ton Throat depth: 500 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm Flat steel: 450x15 / 450x18 mm Blade length: 475 mm Angle steel: 130x130x13 mm Round / square steel: 45/40 mm Notcher: 12 mm Bending unit: 200x12 mm Motor: 9.2 kW Length: 2300 mm Width: 1200 mm Height: 2100 mm Weight: 2400 kg
Punching power: 85 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9.2 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
2
Sheet metal working machinesSection steel shears

Steelworker GEKA BENDICROP 85 S

GEKA BENDICROP 85 S
Punching power: 85 ton Throat depth: 300 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm Flat steel: 450x15 / 450x18 mm Blade length: 475 mm Angle steel: 130x130x13 mm Round / square steel: 45/40 mm Notcher: 12 mm Bending unit: 200x12 mm Motor: 9.2 kW Length: 2300 mm Width: 1200 mm Height: 2100 mm Weight: 2400 kg
Punching power: 85 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9.2 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
6
Sheet metal working machinesSection steel shears

Steelworker GEKA Bendicrop 60 SD Semipaxy 1000x400

GEKA Bendicrop 60 SD Semipaxy 1000x400
Punching power: 60 ton Throat depth: 500 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40x11 mm Stroke: 32 mm Flat steel: 350x15 mm Angle steel: 120x10 mm Round / square steel: 45/40 mm Bending unit: 150x10 mm Motor: 5.5 kW Length: 1950 mm Width: 2000 mm Height: 1900 mm Weight: 1900 kg
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40x11 mm
Stroke: 32 mm
Flat steel: 350x15 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Motor: 5.5 kW
Length: 1950 mm
Width: 2000 mm
Height: 1900 mm
Weight: 1900 kg
2
Sheet metal working machinesSection steel shears

Steelworker GEKA Bendicrop 60 SD

GEKA Bendicrop 60 SD
Punching power: 60 ton Throat depth: 500 mm Number of stations: 5 Cylinder: 2 Max. diameter at sheet thickness (mild steel): 40x11 mm Strokes: 32 1/min Flat steel: 350x10 mm Angle steel: 120x10 mm Round / square steel: 45/40 mm Notcher: 100x10 mm Bending unit: 150x10 mm Motor: 5.5 kW Length: 2100 mm Width: 1400 mm Height: 2060 mm Weight: 1750 kg
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Strokes: 32 1/min
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Notcher: 100x10 mm
Bending unit: 150x10 mm
Motor: 5.5 kW
Length: 2100 mm
Width: 1400 mm
Height: 2060 mm
Weight: 1750 kg
5
Sheet metal working machinesSwivel bending machines

Hydraulic long folding machine BIEGEMASTER DURO 5.1,50

BIEGEMASTER DURO 5.1,50
Bending capacity steel 400 N/mm²: 1.5 mm Bending capacity Alu 190 N/mm²: 2 mm Cutting capacity electrical shear: 1.5 - 2 mm No. of stand and tension arm units: 6 No. of driven linkage assemblies: 6 Sheet insertion depth: 1130 mm Opening of upper beam: 180 mm Working height: 915 mm Motor: 3 kW Length with hand shear: 5550 mm Length with electrical shear: 6200 mm Width: 1435 mm Height: 1460 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
5
Sheet metal working machinesSwivel bending machines

Hydraulic long folding machine BIEGEMASTER DURO 5.1,25

BIEGEMASTER DURO 5.1,25
Bending capacity steel 400 N/mm²: 1.25 mm Bending capacity Alu 190 N/mm²: 2 mm Cutting capacity electrical shear: 1.25 - 1.5 mm No. of stand and tension arm units: 5 No. of driven linkage assemblies: 5 Sheet insertion depth: 1130 mm Opening of upper beam: 180 mm Working height: 915 mm Motor: 2 kW Length with hand shear: 5550 mm Length with electrical shear: 6200 mm Width: 1435 mm Height: 1460 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
6
Sheet metal working machinesSwivel bending machines

Hydraulic long folding machine double bender BIEGEMASTER XBE

BIEGEMASTER XBEND 8.1,50
Bending length: 8020 mm Bending capacity steel 400 N/mm²: 1.5 mm Bending capacity Alu 190 N/mm²: 2 mm Cutting capacity electrical shear: 1.5 - 2 mm No. of stand and tension arm units: 6 No. of driven linkage assemblies: 6 Sheet insertion depth: 1000 mm
Bending length: 8020 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1000 mm
6
Sheet metal working machinesSwivel bending machines

Hydraulic long folding machine double bender BIEGEMASTER XBE

BIEGEMASTER XBEND 6.2,00
Bending length: 6400 mm Bending capacity steel 400 N/mm²: 2 mm Bending capacity Alu 190 N/mm²: 2 mm Cutting capacity electrical shear: 1.5 - 2 mm No. of stand and tension arm units: 7 No. of driven linkage assemblies: 7 Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1000 mm
6
Sheet metal working machinesSwivel bending machines

Hydraulic long folding machine double bender BIEGEMASTER XBE

BIEGEMASTER XBEND 6.1,50
Bending length: 6400 mm Bending capacity steel 400 N/mm²: 1.5 mm Bending capacity Alu 190 N/mm²: 2 mm Cutting capacity electrical shear: 1.5 - 2 mm No. of stand and tension arm units: 5 No. of driven linkage assemblies: 5 Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
6
Sheet metal working machinesSwivel bending machines

Hydraulic long folding machine double bender BIEGEMASTER XBE

BIEGEMASTER XBEND 6.1,25
Bending length: 6400 mm Bending capacity steel 400 N/mm²: 1.25 mm Bending capacity Alu 190 N/mm²: 2 mm Cutting capacity electrical shear: 1.5 - 2 mm No. of stand and tension arm units: 4 No. of driven linkage assemblies: 4 Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
6
Sheet metal working machinesSwivel bending machines

Hydraulic long folding machine double bender BIEGEMASTER XBE

BIEGEMASTER XBEND 5.1,50
Bending length: 5010 mm Bending capacity steel 400 N/mm²: 1.5 mm Bending capacity Alu 190 N/mm²: 2 mm No. of stand and tension arm units: 4 No. of driven linkage assemblies: 4 Sheet insertion depth: 1000 mm
Bending length: 5010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
5
PressesWorkshop press

Hydraulic workshop press with bending device HESSE by LFSS A

HESSE by LFSS AP 1520/150
pressing capacity: 150 to Cylinder fix or moveable: fix Bending length: 1520 mm Stroke: 300 mm Distance between columns: 1520 mm Distance between table and toolholder: 610 mm Rapid speed: 9 mm/s Working speed: 5 mm/s Retraction speed: 10 mm/s Max. bending capacity (mild steel): 10 mm Table: 600x1520 mm Hole in table: 100 mm Hole distance: 190 mm Length: 2630 mm Width: 1000 mm Height: 2450 mm Weight: 3270 kg
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
5
PressesWorkshop press

Hydraulic workshop press with bending device HESSE by LFSS A

HESSE by LFSS AP 1020/100
pressing capacity: 100 to Cylinder fix or moveable: fix Bending length: 1020 mm Stroke: 300 mm Distance between columns: 1020 mm Distance between table and toolholder: 680 mm Rapid speed: 9 mm/s Working speed: 5 mm/s Retraction speed: 10 mm/s Max. bending capacity (mild steel): 6 mm Table: 500x1020 mm Hole in table: 100 mm Hole distance: 190 mm Length: 2110 mm Width: 1000 mm Height: 2275 mm Weight: 2082 kg
pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1020 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 680 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2082 kg
7
Sheet metal working machinesPress brakes

Hydraulic NC press brake HESSE by ISITAN Edgebender 1230

HESSE by ISITAN Edgebender 1230
pressing capacity: 30 to Bending length: 1250 mm Axes: X and Y axis Stroke: 150 mm Inside distance between side frames: 1010 mm Gap in side frame: 255 mm Daylight: 265 mm Power concept: hydraulic rapid speed Y-axis: 210 mm/s Working speed Y-axis: 10 Motor power: 3 kW Length: 1760 mm Width: 1375 mm Height: 2135 mm Weight: 1700 kg
pressing capacity: 30 to
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
rapid speed Y-axis: 210 mm/s
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg
4
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-Servo 40220

HESSE by DURMA AD-Servo 40220
pressing capacity: 220 to Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Inside distance between side frames: 3600 mm Gap in side frame: 410 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 200 mm/s Working speed Y-axis: 12 Retractionspeed Y-axis: 180 Back gauge travel X-axis: 650 mm Back gauge speed X-axis: 500 Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2 x 11 kW Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 15000 kg
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
4
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-Servo 30220

HESSE by DURMA AD-Servo 30220
pressing capacity: 220 to Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Inside distance between side frames: 2600 mm Gap in side frame: 410 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 200 mm/s Working speed Y-axis: 12 Retractionspeed Y-axis: 180 Back gauge travel X-axis: 650 mm Back gauge speed X-axis: 500 Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor: 11 kW Length: 4250 mm Width: 1770 mm Height: 2900 mm Weight: 12250 kg
pressing capacity: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12250 kg
4
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-Servo 30135

HESSE by DURMA AD-Servo 30135
pressing capacity: 135 to Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Inside distance between side frames: 2600 mm Gap in side frame: 410 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 200 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 200 Back gauge travel X-axis: 650 mm Back gauge speed X-axis: 500 Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2x4 kW Length: 4200 mm Width: 1680 mm Height: 2750 mm Weight: 9500 kg
pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2x4 kW
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
4
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-S 30320

HESSE by DURMA AD-S 30320
pressing capacity: 320 to Bending length: 3050 mm Axes: Y1 / Y2 / X axis Stroke: 365 mm Inside distance between side frames: 2600 mm Gap in side frame: 450 mm Daylight: 630 mm Power concept: hydraulic rapid speed Y-axis: 160 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 140 Back gauge speed X-axis: 500 Back gauge speed R-axis: 350 mm/s Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oiltank: 250 l Motor power: 37 kW Length: 4300 mm Width: 1820 mm Height: 3330 mm Weight: 17100 kg
pressing capacity: 320 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 17100 kg
4
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-S 40220

HESSE by DURMA AD-S 40220
pressing capacity: 220 to Bending length: 4050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Inside distance between side frames: 3600 mm Gap in side frame: 450 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 160 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 140 Back gauge speed X-axis: 500 Back gauge speed R-axis: 350 mm/s Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oiltank: 250 l Motor power: 22 kW Length: 5250 mm Width: 1770 mm Height: 3000 mm Weight: 14750 kg
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 5250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 14750 kg
4
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-S 30220

HESSE by DURMA AD-S 30220
pressing capacity: 220 to Bending length: 3050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Inside distance between side frames: 2600 mm Gap in side frame: 450 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 140 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 140 Back gauge speed X-axis: 500 Back gauge speed R-axis: 350 mm/s Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oiltank: 250 l Motor power: 22 kW Length: 4250 mm Width: 1770 mm Height: 3000 mm Weight: 12600 kg
pressing capacity: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 140 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 4250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 12600 kg
4
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-S 40175

HESSE by DURMA AD-S 40175
pressing capacity: 175 to Bending length: 4050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Inside distance between side frames: 3600 mm Gap in side frame: 450 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 160 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 140 Back gauge speed X-axis: 500 Back gauge speed R-axis: 350 mm/s Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oiltank: 250 l Motor power: 18.5 kW Length: 5250 mm Width: 1700 mm Height: 2850 mm Weight: 12780 kg
pressing capacity: 175 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 12780 kg
3
Sheet metal working machinesSwivel bending machines

Hydraulic folding machine FINTEK AMH 2025

FINTEK AMH 2025
Bending length: 2035 mm Sheet thickness (420 N/mm²): 2.5 mm Antrieb: Hydraulic Max. bending angle: 135 ° Length: 3000 mm Width: 1100 mm Height: 1750 mm Weight: 2100 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
5
Sheet metal working machinesSwivel bending machines

Hydraulic long folding machine BIEGEMASTER DURA 4.1,25

BIEGEMASTER DURA 4.1,25
Bending length: 4010 mm Bending capacity steel 400 N/mm²: 1.25 mm Bending capacity Alu 190 N/mm²: 2 mm Cutting capacity electrical shear: 1.25 mm No. of stand and tension arm units: 4 No. of driven linkage assemblies: 4 Sheet insertion depth: 1130 mm Opening of upper beam: 180 mm Working height: 915 mm Motor: 2.2 kW Length with hand shear: 4550 mm Length with electrical shear: 5200 mm Width: 1435 mm Height: 1460 mm Weight: 2600 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
4
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-S 25100

HESSE by DURMA AD-S 25100
pressing capacity: 100 to Bending length: 2550 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Inside distance between side frames: 2200 mm Gap in side frame: 450 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 180 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 120 Back gauge speed X-axis: 500 Back gauge speed R-axis: 350 mm/s Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oiltank: 100 l Motor power: 11 kW Length: 3800 mm Width: 1670 mm Height: 2850 mm Weight: 7800 kg
pressing capacity: 100 to
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
1
Sheet metal working machinesFeed straighteners

Servo feeder HESSE by COILTECH CMSS PRO 200

HESSE by COILTECH CMSS PRO 200
Sheet Thickness - mild steel: 0.4 - 3.5 mm Max. sheet width: 200 mm Max. cross-section: 200 x 3 mm Feed roll diameter: 80 mm Feeding speed: 75 m/min Feeding acceleration: 10 m/s² Motor torque: 10 Nm
Sheet Thickness - mild steel: 0.4 - 3.5 mm
Max. sheet width: 200 mm
Max. cross-section: 200 x 3 mm
Feed roll diameter: 80 mm
Feeding speed: 75 m/min
Feeding acceleration: 10 m/s²
Motor torque: 10 Nm
2
Sheet metal working machinesOther

Motorized notcher ALMI AL 1-2 E

ALMI AL 1-2 E
Tube diameter: 3/4" 26,9 mm, 1" 33,7 mm, 1¼" 42,4 mm, 1½" 48,3 mm, 2" 60,3 mm Max. wall thickness: 5 mm Max. wall thickness stainless steel: 3 mm Weight: 87 kg
Tube diameter: 3/4" 26,9 mm, 1" 33,7 mm, 1¼" 42,4 mm, 1½" 48,3 mm, 2" 60,3 mm
Max. wall thickness: 5 mm
Max. wall thickness stainless steel: 3 mm
Weight: 87 kg
8
Sheet metal working machinesSlitting and cut-to-length lines

Slitting line HESSE 1250 / 1,25

HESSE 1250 / 1,25
Max. sheet width: 1250 mm Max. thickness - mild steel: 1.25 mm Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren Motor: 0.37 kW Speed: 36 m/min Shaft diameter: 70 Length: 1900 mm Width: 1600 mm Height: 1000 mm Weight: 350 kg
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
2
Sheet metal working machinesBending machines

Panel bender HESSE by DURMA Blue Bend PB 2

Blue Bend PB 2
Bending length: 350 - 2250 mm Max. sheet length: 2600 mm Max. sheet width: 1524 mm Min. bendable width: 150 mm Max. bending height: 254 mm Max. bending depth: 50 mm Max. sheet rotation area: 3300 mm Bending force: 32 to Pressure force: 52 to Sheet thickness (420 N/mm²): 2.5 mm Sheet thickness (600 N/mm²): 1.8 mm Sheet thickness (260 N/mm²): 3.5 mm Min. sheet thickness - mild steel: 0.5 mm Max. bending angle: 135 °
Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
2
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1050 x 130
Bending length: 1050 mm Max. bending capacity - mild steel: 5 Upper roll diameter: 130 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 2200 mm Width: 750 mm Height: 1000 mm Weight: 1200 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg
2
Sheet metal working machines

Beveling machine PROMOTECH ABM-14

PROMOTECH ABM-14
Suitable for plates: 1 Suitable for tubes: 1 Max. bevel width: 14 mm Bevel angle: 30 ° Spindle speed (load-free): 9 rpm Plate thickness: 6 - 40 mm Min. plate width: 55 mm Min. tube inner diameter: 100 mm Feed speed: 2600 mm/min Motor: 2.2 kW Length: 589 mm Width: 541 mm Height: 320 mm Weight: 65 kg
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 14 mm
Bevel angle: 30 °
Spindle speed (load-free): 9 rpm
Plate thickness: 6 - 40 mm
Min. plate width: 55 mm
Min. tube inner diameter: 100 mm
Feed speed: 2600 mm/min
Motor: 2.2 kW
Length: 589 mm
Width: 541 mm
Height: 320 mm
Weight: 65 kg
11
Injection molding machinesPlastic injection molding machines

Used DEMAG Ergotech pro 50-270

DEMAG Ergotech pro 50-270
Ref. no.: 18142 Hersteller: DEMAG Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg
Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997

Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar

Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
13
Injection molding machinesMulti-component injection molding machines

Used ENGEL ES 1350H 200W / 300HL-2F

ENGEL ES 1350H 200W / 300HL-2F
Ref. no.: 18092 Hersteller: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg
Ref. no.: 18092
Hersteller: ENGEL
Year of construction: 2001

Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm

Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar

Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
11
Injection molding machinesPlastic injection molding machines

Used DEMAG ERGOtech system 800-310

DEMAG ERGOtech system 800-310
Ref. no.: 17507 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg
Ref. no.: 17507
Hersteller: DEMAG
Year of construction: 1998

Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar

Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
13
Injection molding machinesPlastic injection molding machines

Used BATTENFELD EM 75-120 Unilog B4 All-electric

BATTENFELD EM 75-120 Unilog B4 All-electric
Ref. no.: 16369 Hersteller: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005

Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm

Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar

Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
2
LathesOther

Ludwig & Fries Hallmark Set

Ludwig & Fries
punch set

punch set
1
Sanding machinesAccessories and spare parts

GMN TSAV 160 x 630

GMN TSAV 160 x 630
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function

Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
9
Accessories and spare partsOther

MITUTOYO B-706 securing device

MITUTOYO B-706
Deposit: 1000,00 EUR Packet 1: 30 x 30 x 20 cm bei 20 kg Packet 2: 25 x 20 x 110 cm bei 19 kg complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg

complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
4
Milling machinesAccessories and spare parts

3R 3Refix 3R-935-56.40 02 Clamping field

3R 3Refix 3R-935-56.40 02
Working Area: 560 x 400 x 32 mm Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
Working Area: 560 x 400 x 32 mm

Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
6
Milling machinesAccessories and spare parts

LOEWE dividing head

LOEWE
Rotary table: 360 ° Rotary axis Ø: 400 mm Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m Weight of machine: 240 kg Condition: good
Rotary table: 360 °
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
5
Accessories and spare partsMeasuring technology

Kreuzer measuring table

Kreuzer
Granite plate: 750/ 500/ 20,5 mm Aluminium plate: 750/ 500/ 40 mm Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m Weight of machine: 370 kg Condition: very good measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good

measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
8
SawingBelt saws

PEHAKA HS340 band-saw horiz.

PEHAKA HS340
Cutting diameter: 340 x 200 mm Sectional area 45° circular: 230 mm Cutting speed: 20 - 120 m/min Stop: 600 mm Saw blade dimensions: 4770-4870 x 32 x 1 mm Total power: 4 kW Weight of machine: 1400 kg Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m semi-automatic operation, robust machine, good condition, ready to use
Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m

semi-automatic operation, robust machine, good condition, ready to use
8
Sawing

EISELE VMSIIPVPR.072 Iron Saw

EISELE VMSIIPVPR.072
Cutting diameter: 100 mm Saw blade dimensions: 280 mm Speed range: 10, 20, 40, 80 rpm Sectional area 90° flat: 120 x 100 mm Sectional area 90° circular: 100 mm Length stop: 500 mm Total power: 1,5 kW Weight of machine: 700 kg Condition: good semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply Accessory: 18 saw blades, roller conveyor 2 m
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good

semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply

Accessory: 18 saw blades, roller conveyor 2 m
Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.
Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !
Sign up now for free