Schnittdurchmesser: 530 mm
Sägebandlänge: 6670 mm
Schnittbreite: 530 mm
Steuerung: CNC
Hauptantriebsmotor: 7,5 kW
Rollbahn: optional
Gesamtleistungsbedarf: 13 kW
Maschinengewicht ca.: 6,3 t
Raumbedarf ca.: m

Ausladung: 4000 mm
Tragkraft in kg: 1000 kg
Schwenkbereich: mindestens 160 Grad
Höhe: 4000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Projection: 4000 mm
Load capacity in kg: 1000 kg
Pan range: at least 160 degrees
Height: 4000mm
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Outreach: 3500 mm
Load capacity in kg: 1000 kg
Pan range: at least 160 degrees
Height: 3000mm
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Load capacity in kg: 2500 kg
Stroke: 2900mm
Fork length: . mm
Total power requirement: kW
Machine weight approx.: 3310 t
Space requirement approx.: m

Faceplate diameter: 1400 mm
Swing diameter: 1600 mm
Turning height: 1500 mm
Control: Siemens
Type: 840D
Workpiece weight: 6500 kg
Support displacement vertical: 1000 mm
Speed: 10-315 rpm
Feed: 3600mm/min
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Faceplate diameter: 1250 mm
Swing diameter: 1500 mm
Turning height: 1250 mm
Control: Siemens
Type: 840 DSl
Tool holder: 4 pos.
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Faceplate diameter: 1200 mm
Swing diameter: 1500 mm
Turning height: 1300 mm
Support adjustment: 800 mm
Side support - horizontal adjustment: 550 mm
Digital display: Heidenhain
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Turning diameter: 820 mm
Turning length: 300mm
Turning diameter over support: 465 mm
Spindle torque: 3000 Nm
Speed: 5.6-1120 rpm
Feed: 1-5000mm/min
Rapid traverse: 5000 mm/min
Tailstock quill mount MK: 6
Three-jaw chuck Forckrath: mm
Bezel: mm
Main drive motor: 50 kW
Main spindle diameter: 170 mm
Spindle passage: 128 mm
Tailstock quill diameter: 125 mm
Tailstock quill stroke: 250 mm
z-axis: 3000 mm
x-axis: 550 mm
Total power requirement: 52 kW
Machine weight approx.: 7.1 t
Space requirement approx.: m

Scissor lift

380 volts
Max weight: 1200 kg.
Easy loading with pallet truck.
Equipped with foot protection.

Max height: 78 cm
Min height: 8 cm

Dimensions: 1.3 x 0.9 meters (suitable for Euro pallets)

Ryobi 524 HXX

Year 2004

Heidelberg GTP Hot Foil

size 34×46
with Hotfoil

Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames

Wook il WTNS S1700 die cutting machine

Year of construction: 2000
Max. pressure 350 TON



Maximum size: 1200×1700mm

Minimum size: 600 x 850 mm

Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar

Measurements and weight
Machine weight: 13500 kg

Robot
Producer: Wittman
Type: W743
Year: 2009

CHILLER GR2A 80/Z
Year: 2015
Very good state
Nominal cooling capacity: 77.5 kw - 66,600 kcal /h
Pump flow: 222 L/min
Excellent condition - 9 month warranty.
Net weight: 900 KG
Dimensions: 2200mm x 1450mm x 2200mm

Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm

Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm

2 hydraulic core pull

Dimensions:
4960 x 3656 x 3360mm

Weight: 14500KG

Heidelberg GTP orignal hotfoil platen

Ideal 7228-95

Year 2003
Photcell safety
Spare knife

Hesta blow moulding machine in good condition
HESTA ST 502 extrusion blow molding machine
clamping force : 150 KN
Screw diameter: 50 mm / 22D
2 x 125mm
Speed: 300mm/sec
Shape thickness: 230-280mm
Maximum PE weight: 400 g
Machine weight: 3200 KG

BLOW MOLDING MACHINE BILLION P300
3 liters
Clamping force: 2 x 3.3 T
Closing stroke: 2 x 150 mm
Min mold thickness: 150mm
Platen Dimensions: Horizontal: 310mm x Vertical: 310mm
Screw diameter: 50mm
Screw stroke: 170 mm
Capacity per shot: 333 cm3
Pressure on the material: 1000 kg/cm2
L/D screw ratio: 15
Many spare parts supplied with the machine + several control cabinets + 1 set of molds

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 200
This injection blow molding machine PROCREA REV 200 can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 4 liters and weight of 5 gr. at 200 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 200 is very simple thanks to the automatic extraction system applied to the revolver.

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 150
This PROCREA REV 150 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 1500 cc and weight of 5 gr. at 150 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 150 is very simple thanks to the automatic extraction system applied to the revolver.

2 head
Entraxe :100 mm
Volume max of the bottle : 0,5 l
Number of post: 1
Extrusion continuous
Nombre d'extrudeuses: 1
Screw diameter : 60 mm
Rapport L/D: 20
Parison thickness control : PROFILOG 32 point
Heating knife
Voltage : 380 V Triphase
Frequency : 50 Hz

Robot WITTMANN
Reference : PIP 3040 BZ
Year : 2002

1 Set of PIOVAN peripheral with : 1 isolated hopper TN600 + 1 dryer high temperature PIOVAN DP622 + 1 PIOVAN power turbine F48

DRYING HOPPER brand PIOVAN Reference TN 600
With trapdoor
Contain 600 liters
Year 2015 , in perfect condition
7000 working hours

Dryer PIOVAN DP622
High temperature 200 °C
Dew point : - 60°C
Year 2015 , in perfect condition
7000 working hours

Power Turbine PIOVAN reference FA48
Power : 3 KW
Year 2015 , in perfect condition
7000 working hours

PLATFORM

SEPRO robot reference SR 4030 S3 visual in good condition
Year : April 2007
Weight of the robot : 900 KG
Weight of the command : 110 KG
Rated load : 12 kg

Strocke in X : 5500 mm
Strocke in Y : 800 mm
Strocke in Z : 1400 mm

CHILLER GRAC 250/Z
Year 2009
Nominal cooling capacity: 249 kw - 214.000 kcal /h
Pump flow: 710 L /min
Very good condition - 6 month warranty.
Weight : 2600 KG
Dimensions : 5500 mm x 1650 mm x 2300 mm

CHILLER GRAC 330/Z
Year 2006
Nominal cooling capacity: 328 kw - 282.000 kcal /h
Pump flow: 940 L /min
Very good condition - 6 month warranty.
Weight : 3400 KG
Dimensions : 5100 mm x 2150 mm x 2150 mm

Chiller INDUSTRIAL FRIGO type SIRE1 - 165/350 HP/Z/X With integrated energy saving system
Nominal cooling capacity: 164 KW - 141000 kcal/H
2 compressors 13,8 KW - max 24,5 KW
1 pump 10 KW - 470 L/min - 5,3 bars
Cooling capacity 175 KW - 151000 kcal/H
1 pump2 KW - 500 L/min - 1,7 bars
4 fans power of 1,3 KW - 65 000 m3/H
Internal capacity : 750 liters
Dimension : 3700 mm x 1100 mm x 2100 mm
Weight : 2300 KG

CHILLER GR2A 40/Z
Year 2017
Nominal cooling capacity: 40 KW - 33.100 kcal /h
Pump flow : 110 L /min
Very good condition - 6 month warranty.

CHILLER GR1AC30
Year 2017
Nominal cooling capacity: 30 kw - 24.000 kcal /h
Pump flow: 80 L /min
Very good condition - 6 month warranty.
Weight : 470 KG
Dimensions : 1100 mm x 1900 mm x 1900 mm

CHILLER brand DELTA PROCESS ALIZE 16 - 45 KW
Year 2002
In goog condition
Cooling power :45 KW
Voltage : 400 V
Frequency : 50 Hertz
Cooling liquid : R407C
Power install on the chiller : 15,74 kw

CHILLER brand PIOVAN CH 480 - 57 KW
Year 2015
In perfect condition - 7000 working hours
Cooling power : 57 KW
Voltage : 400 V
Frequency : 50 Hertz
Cooling liquid : R407C

Dryer PIOVAN DP622
High temperature 200 °C
Dew point : - 60°C
Year 2015 , in perfect condition
7000 working hours

PIOVAN RPA 800 mould dryer
Total power : 7,8 KW
Weight : 210 KG
Dimensions: 600 x 750 x 1500 mm
Year 2015 , in perfect condition , only 7000 working hours.

From 700 to 800 m3/h

For ambient temperature up to 45°C and humidity up to 90%
Easy maintenance
Compact footprint for installation close to primary machine on mezanine or floor.

Piovan Mould Dryers is ideal to prevent condensation in the mould area. They can operate in open or closed loop and for single or multiple machines.
Consistent dew point is assured by the PID control. Designed for fast start-up, do not need settings by operators.

They are ideally suited for:
• Mould enclosures of fast-cycle IMM’s
• Mould enclosures of blow moulding machines
• Mould enclosures and robot area of PET IMM’s

SEGHERS SMC 220 L thermal stripping system
Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters.
The combustion chamber is heated to approximately 420 degrees.
The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber.
Perfect cleaning for a cycle time of 90 to 150 min.
Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm
Dimensions of the basket: diameter 210 mm and length: 260 mm

SURFACE GRINDING MACHINE JONES & SHIPMAN
FORMAT 5-150

Lathe LEFEVRE ET MARTIN
Distance between points: 1000mm

Lathe H.ERNAULT SOMUA
Distance between points: 1000mm

Lathe GALLIC (Batch - 1 )
Distance between points: 1000mm

Lathe H.ERNAULT BATIGNOLLES ( Batch - 1)
Distance between points: 1000mm

Lathe CAZENEUVE HB575
Distance between points: 1000mm
+ With visual

MILLING MACHINE GAMBIN 11M ( Batch -1)
With visual

MILLING MACHINE KONDIA Type FV-1

MILLING MACHINE HURON KU5 ( Batch -1)
With visual

Vertical injection moulding machine REP super Sancar
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm

Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot

Billion 200 T injection molding machine
Model : H780 / 200
Year : 1998
Screw diameter: 50mm
Injectable volume : 422 cm3
Injection pressure: 1843 bars
L / D: 22.3
Clamping force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Distance between tie bars (h x v): 610mm x 610mm
Ejection stroke: 150mm
Dimension : 6,1 m x 1,9m x 2,35m
Weight : 9.5 t

Injection moulding machine SANDRETTO serie 9
Clamping force : 230 T
Year : 2001
Screw diameter is 50 mm.
Volume injectable : 475 cm3
Platen dimensions : 860 x 860 mm
Distance between tie bar is : 570 x 570 mm
Dimension are : 6,67 m x 2,22 m x 1,82 m
Weight of the machine : 10 200 KG