8
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18614
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 26 cm³
Shot weight: 23 g
Injection pressure: 2800 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ref. no.: 18614
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 26 cm³
Shot weight: 23 g
Injection pressure: 2800 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 26 cm³
Shot weight: 23 g
Injection pressure: 2800 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
10
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18625
Manufacturer: WITTMANN BATTENFELD
Year of construction: 2011
Clamping unit
Clamping force: 110 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 450 mm
Platen size (h x v): 680 x 663 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 88 cm³
Shot weight: 80 g
Injection pressure: 1471 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 4600 kg
Further information:
Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.
All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.
Compared to conventional hydraulic injection moulding machines, the EcoPower series can achieve approximately 60% up to 80% energy savings depending on the application. In addition, the machines offer lower heat generation, quiet operation and a cleaner production environment.
The integrated UNILOG B6 / B6P control system is well known for its user-friendly operation, reliable process management and stable long-term performance. Combined with high dynamic servo technology and low-vibration operation, the EcoPower platform is especially suitable for technical plastic parts, electronic components, automotive applications and medical production.
Today, the Wittmann Battenfeld EcoPower series is still considered one of the most reliable and energy-efficient all-electric injection moulding machine platforms on the market.
Ref. no.: 18625
Manufacturer: WITTMANN BATTENFELD
Year of construction: 2011
Clamping unit
Clamping force: 110 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 450 mm
Platen size (h x v): 680 x 663 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 88 cm³
Shot weight: 80 g
Injection pressure: 1471 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 4600 kg
Further information:
Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.
All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.
Compared to conventional hydraulic injection moulding machines, the EcoPower series can achieve approximately 60% up to 80% energy savings depending on the application. In addition, the machines offer lower heat generation, quiet operation and a cleaner production environment.
The integrated UNILOG B6 / B6P control system is well known for its user-friendly operation, reliable process management and stable long-term performance. Combined with high dynamic servo technology and low-vibration operation, the EcoPower platform is especially suitable for technical plastic parts, electronic components, automotive applications and medical production.
Today, the Wittmann Battenfeld EcoPower series is still considered one of the most reliable and energy-efficient all-electric injection moulding machine platforms on the market.
Manufacturer: WITTMANN BATTENFELD
Year of construction: 2011
Clamping unit
Clamping force: 110 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 450 mm
Platen size (h x v): 680 x 663 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 88 cm³
Shot weight: 80 g
Injection pressure: 1471 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 4600 kg
Further information:
Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.
All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.
Compared to conventional hydraulic injection moulding machines, the EcoPower series can achieve approximately 60% up to 80% energy savings depending on the application. In addition, the machines offer lower heat generation, quiet operation and a cleaner production environment.
The integrated UNILOG B6 / B6P control system is well known for its user-friendly operation, reliable process management and stable long-term performance. Combined with high dynamic servo technology and low-vibration operation, the EcoPower platform is especially suitable for technical plastic parts, electronic components, automotive applications and medical production.
Today, the Wittmann Battenfeld EcoPower series is still considered one of the most reliable and energy-efficient all-electric injection moulding machine platforms on the market.
2
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 3100 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 300 mm
Lower roll diameter: 300 mm
Lateral roll diameter: 240 mm
Max. opening: 50 mm
Working height: 1140 mm
Motor power: 18.5 kW
Length: 5310 mm
Width: 1660 mm
Height: 1140 mm
Weight: 11100 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 300 mm
Lower roll diameter: 300 mm
Lateral roll diameter: 240 mm
Max. opening: 50 mm
Working height: 1140 mm
Motor power: 18.5 kW
Length: 5310 mm
Width: 1660 mm
Height: 1140 mm
Weight: 11100 kg
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 300 mm
Lower roll diameter: 300 mm
Lateral roll diameter: 240 mm
Max. opening: 50 mm
Working height: 1140 mm
Motor power: 18.5 kW
Length: 5310 mm
Width: 1660 mm
Height: 1140 mm
Weight: 11100 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2050 mm
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
6
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2050 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1270 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1050 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
3
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 150 to
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
pressing capacity: 150 to
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
7
Food machinesBeverage productionPumps
Omac B110 Lobe pump, Unused, Stainless, durable and efficient lobe pump, complete with 3Ph Seipee motor, 1400Rpm, 0.55Kw motor, on stainless skid, 55mm inlet and outlet
Omac B110 Lobe pump, Unused, Stainless, durable and efficient lobe pump, complete with 3Ph Seipee motor, 1400Rpm, 0.55Kw motor, on stainless skid, 55mm inlet and outlet
Metal working and machine toolsMilling machinesUniversal milling machines
x-Weg: 850 mmy-Weg: 300 mmz-Weg: 550 mmTischfläche: 1100x270 mmDrehzahl: U/minVorschub: . m/minAusladung: . mmSpindelhub: . mmAufnahme: Sk40
x-Weg: 850 mm
y-Weg: 300 mm
z-Weg: 550 mm
Tischfläche: 1100x270 mm
Drehzahl: U/min
Vorschub: . m/min
Ausladung: . mm
Spindelhub: . mm
Aufnahme: Sk40
y-Weg: 300 mm
z-Weg: 550 mm
Tischfläche: 1100x270 mm
Drehzahl: U/min
Vorschub: . m/min
Ausladung: . mm
Spindelhub: . mm
Aufnahme: Sk40
7
Metal working and machine toolsMilling machinesBed milling machines
x-Weg: 10500 mmy-Weg: 1200 mmz-Weg: 1600 mmSteuerung: Heidenhain TNC 426-CAAufnahme ISO: 50 P.D.B.Tischabmessung: 1100 x 12000 mmWerkstückspindel-Drehzahlen: 20 - 2000 mmSpannung: 380 VGesamtleistungsbedarf: 22 kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 10500 mm
y-Weg: 1200 mm
z-Weg: 1600 mm
Steuerung: Heidenhain TNC 426-CA
Aufnahme ISO: 50 P.D.B.
Tischabmessung: 1100 x 12000 mm
Werkstückspindel-Drehzahlen: 20 - 2000 mm
Spannung: 380 V
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 1200 mm
z-Weg: 1600 mm
Steuerung: Heidenhain TNC 426-CA
Aufnahme ISO: 50 P.D.B.
Tischabmessung: 1100 x 12000 mm
Werkstückspindel-Drehzahlen: 20 - 2000 mm
Spannung: 380 V
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 110 mmx-Weg: 2000 mmy-Weg: 1500 mmz-Weg: 1450 mmTischfläche: 1400 x 1600 mmAufnahme ISO: 50Spindeldrehzahl:: 2 - 2500Steuerung: TOSNUC 7-3Gesamtleistungsbedarf: 22 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 110 mm
x-Weg: 2000 mm
y-Weg: 1500 mm
z-Weg: 1450 mm
Tischfläche: 1400 x 1600 mm
Aufnahme ISO: 50
Spindeldrehzahl:: 2 - 2500
Steuerung: TOSNUC 7-3
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 2000 mm
y-Weg: 1500 mm
z-Weg: 1450 mm
Tischfläche: 1400 x 1600 mm
Aufnahme ISO: 50
Spindeldrehzahl:: 2 - 2500
Steuerung: TOSNUC 7-3
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
8
Metal working and machine toolsMachining centersUniversal machining centers
x-Weg: 850 mmy-Weg: 700 mmz-Weg: 500 mmSteuerung: Siemens 840 DDrehtisch: 800 mmc-Achse: 0.001º ( ±360º) 0B-Achse (Tisch): +25 / -110 º mmSpindeldrehzahl: 18.000 U/min/rpmWerkzeugaufnahme: HSK 63Werkzeugwechsler: 38 fach/toolsInnere Kühlung Zuführung: 80 barGesamtleistungsbedarf: 43 kVAMaschinengewicht ca.: 10,6 tRaumbedarf ca.: m
x-Weg: 850 mm
y-Weg: 700 mm
z-Weg: 500 mm
Steuerung: Siemens 840 D
Drehtisch: 800 mm
c-Achse: 0.001º ( ±360º) 0
B-Achse (Tisch): +25 / -110 º mm
Spindeldrehzahl: 18.000 U/min/rpm
Werkzeugaufnahme: HSK 63
Werkzeugwechsler: 38 fach/tools
Innere Kühlung Zuführung: 80 bar
Gesamtleistungsbedarf: 43 kVA
Maschinengewicht ca.: 10,6 t
Raumbedarf ca.: m
y-Weg: 700 mm
z-Weg: 500 mm
Steuerung: Siemens 840 D
Drehtisch: 800 mm
c-Achse: 0.001º ( ±360º) 0
B-Achse (Tisch): +25 / -110 º mm
Spindeldrehzahl: 18.000 U/min/rpm
Werkzeugaufnahme: HSK 63
Werkzeugwechsler: 38 fach/tools
Innere Kühlung Zuführung: 80 bar
Gesamtleistungsbedarf: 43 kVA
Maschinengewicht ca.: 10,6 t
Raumbedarf ca.: m
3
Metal working and machine toolsLathesCenter lathes and spindle lathes
Drehdurchmesser über Bett: 930 mmDrehdurchmesser über Support: 630 mmDrehlänge: 6000 mmDrehdurchmesser in der Kröpfung: 1250 mmSpindeldurchmesser: 95 mmGeschwindigkeit: 8-800 (x24) U/minGesamtleistungsbedarf: 22 kWMaschinengewicht ca.: 1100 tRaumbedarf ca.: m
Drehdurchmesser über Bett: 930 mm
Drehdurchmesser über Support: 630 mm
Drehlänge: 6000 mm
Drehdurchmesser in der Kröpfung: 1250 mm
Spindeldurchmesser: 95 mm
Geschwindigkeit: 8-800 (x24) U/min
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: 1100 t
Raumbedarf ca.: m
Drehdurchmesser über Support: 630 mm
Drehlänge: 6000 mm
Drehdurchmesser in der Kröpfung: 1250 mm
Spindeldurchmesser: 95 mm
Geschwindigkeit: 8-800 (x24) U/min
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: 1100 t
Raumbedarf ca.: m
3
Metal working and machine toolsLathesCenter lathes and spindle lathes
Drehdurchmesser über Bett: 1100 mmDrehdurchmesser über Support: 740 mmDrehlänge: 6000 mmSpindelbohrung: 110 mmDrehzahl: 16-1600 U/minPlanscheibe: mmGesamtleistungsbedarf: 22 kWMaschinengewicht ca.: 11 tRaumbedarf ca.: m
Drehdurchmesser über Bett: 1100 mm
Drehdurchmesser über Support: 740 mm
Drehlänge: 6000 mm
Spindelbohrung: 110 mm
Drehzahl: 16-1600 U/min
Planscheibe: mm
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: 11 t
Raumbedarf ca.: m
Drehdurchmesser über Support: 740 mm
Drehlänge: 6000 mm
Spindelbohrung: 110 mm
Drehzahl: 16-1600 U/min
Planscheibe: mm
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: 11 t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesLathes
Drehdurchmesser: 550 mmDrehlänge: 1100 mmSteuerung: Fagor 8040TDrehdurchmesser über Support: 230 mmDrehdurchmesser in der Kröpfung: 740 mmLänge der Kröpfung: 350 mmSpindeldurchlass: 72 mmDrehzahl: 100-4500 U/minLeistung: 7,5 KWDreibackenfutter: 250 mmLünette: 220 mm
Drehdurchmesser: 550 mm
Drehlänge: 1100 mm
Steuerung: Fagor 8040T
Drehdurchmesser über Support: 230 mm
Drehdurchmesser in der Kröpfung: 740 mm
Länge der Kröpfung: 350 mm
Spindeldurchlass: 72 mm
Drehzahl: 100-4500 U/min
Leistung: 7,5 KW
Dreibackenfutter: 250 mm
Lünette: 220 mm
Drehlänge: 1100 mm
Steuerung: Fagor 8040T
Drehdurchmesser über Support: 230 mm
Drehdurchmesser in der Kröpfung: 740 mm
Länge der Kröpfung: 350 mm
Spindeldurchlass: 72 mm
Drehzahl: 100-4500 U/min
Leistung: 7,5 KW
Dreibackenfutter: 250 mm
Lünette: 220 mm
10
Metal working and machine toolsLathesLathes
Drehdurchmesser: 1010 mmDrehlänge: 6000 mmSteuerung: SiemensTyp: Sinumerik 840DDrehdurchmesser über Support: 650 mmDreibackenfutter: Schunk Rota PlusDreibackenfutter Durchmesser: 500 mmBettbreite: 750 mmLünette: 450 mmDrehgeschwindigkeit: 1100 U/minLänge der Kröpfung: 500 mmSpindeldurchlass: 104 mmWerkstückgewicht: 7000 kgHauptmotor: 52 kWDrehzahl: 5-900 U/minGesamtleistungsbedarf: . kWMaschinengewicht ca.: . tRaumbedarf ca.: . m
Drehdurchmesser: 1010 mm
Drehlänge: 6000 mm
Steuerung: Siemens
Typ: Sinumerik 840D
Drehdurchmesser über Support: 650 mm
Dreibackenfutter: Schunk Rota Plus
Dreibackenfutter Durchmesser: 500 mm
Bettbreite: 750 mm
Lünette: 450 mm
Drehgeschwindigkeit: 1100 U/min
Länge der Kröpfung: 500 mm
Spindeldurchlass: 104 mm
Werkstückgewicht: 7000 kg
Hauptmotor: 52 kW
Drehzahl: 5-900 U/min
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
Drehlänge: 6000 mm
Steuerung: Siemens
Typ: Sinumerik 840D
Drehdurchmesser über Support: 650 mm
Dreibackenfutter: Schunk Rota Plus
Dreibackenfutter Durchmesser: 500 mm
Bettbreite: 750 mm
Lünette: 450 mm
Drehgeschwindigkeit: 1100 U/min
Länge der Kröpfung: 500 mm
Spindeldurchlass: 104 mm
Werkstückgewicht: 7000 kg
Hauptmotor: 52 kW
Drehzahl: 5-900 U/min
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
10
Metal working and machine toolsLathesLathes
Drehdurchmesser: 1010 mmDrehlänge: 6000 mmSteuerung: SiemensTyp: Sinumerik 840DDrehdurchmesser über Support: 650 mmDreibackenfutter: Schunk Rota PlusDreibackenfutter Durchmesser: 500 mmBettbreite: 750 mmLünette: 450 mmDrehgeschwindigkeit: 1100 U/minLänge der Kröpfung: 500 mmSpindeldurchlass: 104 mmWerkstückgewicht: 7000 kgHauptmotor: 52 kWDrehzahl: 5-900 U/minGesamtleistungsbedarf: . kWMaschinengewicht ca.: . tRaumbedarf ca.: . m
Drehdurchmesser: 1010 mm
Drehlänge: 6000 mm
Steuerung: Siemens
Typ: Sinumerik 840D
Drehdurchmesser über Support: 650 mm
Dreibackenfutter: Schunk Rota Plus
Dreibackenfutter Durchmesser: 500 mm
Bettbreite: 750 mm
Lünette: 450 mm
Drehgeschwindigkeit: 1100 U/min
Länge der Kröpfung: 500 mm
Spindeldurchlass: 104 mm
Werkstückgewicht: 7000 kg
Hauptmotor: 52 kW
Drehzahl: 5-900 U/min
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
Drehlänge: 6000 mm
Steuerung: Siemens
Typ: Sinumerik 840D
Drehdurchmesser über Support: 650 mm
Dreibackenfutter: Schunk Rota Plus
Dreibackenfutter Durchmesser: 500 mm
Bettbreite: 750 mm
Lünette: 450 mm
Drehgeschwindigkeit: 1100 U/min
Länge der Kröpfung: 500 mm
Spindeldurchlass: 104 mm
Werkstückgewicht: 7000 kg
Hauptmotor: 52 kW
Drehzahl: 5-900 U/min
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
5
Metal working and machine toolsAccessories and spare parts
Länge: 500 mmBreite: 500 mmHöhe: 110 mmGrundfläche: . mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: . kgRaumbedarf ca.: . m
Länge: 500 mm
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
5
Metal working and machine toolsAccessories and spare parts
Länge: 500 mmBreite: 500 mmHöhe: 110 mmGrundfläche: . mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: . kgRaumbedarf ca.: . m
Länge: 500 mm
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
6
Metal working and machine toolsAccessories and spare parts
Länge: 500 mmBreite: 500 mmHöhe: 110 mmGrundfläche: . mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: . kgRaumbedarf ca.: . m
Länge: 500 mm
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
5
Metal working and machine toolsAccessories and spare parts
Länge: 500 mmBreite: 500 mmHöhe: 110 mmGrundfläche: . mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: . kgRaumbedarf ca.: . m
Länge: 500 mm
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
5
Metal working and machine toolsAccessories and spare parts
Länge: 1215 mmBreite: 500 mmHöhe: 110 mmGrundfläche: . mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: . kgRaumbedarf ca.: . m
Länge: 1215 mm
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
Breite: 500 mm
Höhe: 110 mm
Grundfläche: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . kg
Raumbedarf ca.: . m
4
Metal working and machine toolsAccessories and spare partsOther
Umlaufdurchmesser: 475 mmSpitzenhöhe: 510 mmBreite: 110 mmAuflagefläche: 360x310 mmPinolendurchmesser: 80 mmLagerdurchmesser: 75 mmRollenbreite: 36,5 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Umlaufdurchmesser: 475 mm
Spitzenhöhe: 510 mm
Breite: 110 mm
Auflagefläche: 360x310 mm
Pinolendurchmesser: 80 mm
Lagerdurchmesser: 75 mm
Rollenbreite: 36,5 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Spitzenhöhe: 510 mm
Breite: 110 mm
Auflagefläche: 360x310 mm
Pinolendurchmesser: 80 mm
Lagerdurchmesser: 75 mm
Rollenbreite: 36,5 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
6
Metal working and machine toolsAccessories and spare partsOther
Umlaufdurchmesser: 475 mmSpitzenhöhe: 510 mmBreite: 110 mmAuflagefläche: 360x310 mmPinolendurchmesser: 80 mmLagerdurchmesser: 75 mmRollenbreite: 36,5 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Umlaufdurchmesser: 475 mm
Spitzenhöhe: 510 mm
Breite: 110 mm
Auflagefläche: 360x310 mm
Pinolendurchmesser: 80 mm
Lagerdurchmesser: 75 mm
Rollenbreite: 36,5 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Spitzenhöhe: 510 mm
Breite: 110 mm
Auflagefläche: 360x310 mm
Pinolendurchmesser: 80 mm
Lagerdurchmesser: 75 mm
Rollenbreite: 36,5 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
9
Metal working and machine toolsAccessories and spare partsOther
Umlaufdurchmesser: 475 mmSpitzenhöhe: 510 mmBreite: 110 mmAuflagefläche: 360x310 mmPinolendurchmesser: 80 mmLagerdurchmesser: 75 mmRollenbreite: 36,5 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Umlaufdurchmesser: 475 mm
Spitzenhöhe: 510 mm
Breite: 110 mm
Auflagefläche: 360x310 mm
Pinolendurchmesser: 80 mm
Lagerdurchmesser: 75 mm
Rollenbreite: 36,5 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Spitzenhöhe: 510 mm
Breite: 110 mm
Auflagefläche: 360x310 mm
Pinolendurchmesser: 80 mm
Lagerdurchmesser: 75 mm
Rollenbreite: 36,5 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Metal working and machine toolsAccessories and spare partsClamping angles
Breite: 2000 mmTiefe: 1100 mmHöhe: 2000 mmStärke der Aufspannplatte: 65 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Breite: 2000 mm
Tiefe: 1100 mm
Höhe: 2000 mm
Stärke der Aufspannplatte: 65 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tiefe: 1100 mm
Höhe: 2000 mm
Stärke der Aufspannplatte: 65 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
7
Metal working and machine toolsAccessories and spare partsClamping tables
Tischlänge: 1300 mmTischbreite: 550 mmDicke: 170 mmAnzahl der T-Nuten: 5T-Nuten - Breite: 18 mmT-Nuten - Abstand: 110 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: mTischbelastung: t
Tischlänge: 1300 mm
Tischbreite: 550 mm
Dicke: 170 mm
Anzahl der T-Nuten: 5
T-Nuten - Breite: 18 mm
T-Nuten - Abstand: 110 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tischbelastung: t
Tischbreite: 550 mm
Dicke: 170 mm
Anzahl der T-Nuten: 5
T-Nuten - Breite: 18 mm
T-Nuten - Abstand: 110 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tischbelastung: t
8
Metal working and machine toolsLathesCenter lathes and spindle lathes
Weiler Condor B mit Heidenhain 3 - Achs Digitalanzeige-Umlaufdurchmesser über Bett 330mm-Drehdurchmesser über dem Planschlitten 185mm-Spitzenhöhe 165mm-Drehlänge 750mm-Spindeldrehzahlen 22-2800 U/min-Spindeldurchlass 40mm-Reitstock-Pinolenaufnahme MK 3-Pinolenhub 110mm-Gesamtleistungsbedarf 3kW-Heidenhain 3 - Achs Digitalanzeige-Multifix Halter-Multifix Kasette 3 Stück-3 Backenfutter Forkardt-div. Maschinenschlüssel-Maschinenfüsse-LED Arbeitsleuchte-Futterschutz mit elektrischer Abschaltung-Revolveranschlag-Doku/BedienungsanleitungAbmaße:LxBxH 1,8x0,8x1,2 Meter / 1040Kg
Weiler Condor B mit Heidenhain 3 - Achs Digitalanzeige
-Umlaufdurchmesser über Bett 330mm
-Drehdurchmesser über dem Planschlitten 185mm
-Spitzenhöhe 165mm
-Drehlänge 750mm
-Spindeldrehzahlen 22-2800 U/min
-Spindeldurchlass 40mm
-Reitstock-Pinolenaufnahme MK 3
-Pinolenhub 110mm
-Gesamtleistungsbedarf 3kW
-Heidenhain 3 - Achs Digitalanzeige
-Multifix Halter
-Multifix Kasette 3 Stück
-3 Backenfutter Forkardt
-div. Maschinenschlüssel
-Maschinenfüsse
-LED Arbeitsleuchte
-Futterschutz mit elektrischer Abschaltung
-Revolveranschlag
-Doku/Bedienungsanleitung
Abmaße:
LxBxH 1,8x0,8x1,2 Meter / 1040Kg
-Umlaufdurchmesser über Bett 330mm
-Drehdurchmesser über dem Planschlitten 185mm
-Spitzenhöhe 165mm
-Drehlänge 750mm
-Spindeldrehzahlen 22-2800 U/min
-Spindeldurchlass 40mm
-Reitstock-Pinolenaufnahme MK 3
-Pinolenhub 110mm
-Gesamtleistungsbedarf 3kW
-Heidenhain 3 - Achs Digitalanzeige
-Multifix Halter
-Multifix Kasette 3 Stück
-3 Backenfutter Forkardt
-div. Maschinenschlüssel
-Maschinenfüsse
-LED Arbeitsleuchte
-Futterschutz mit elektrischer Abschaltung
-Revolveranschlag
-Doku/Bedienungsanleitung
Abmaße:
LxBxH 1,8x0,8x1,2 Meter / 1040Kg
6
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 3270x27x0,9 mm
Band speed: 40/80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 350x260 mm
Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm
Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm
Working height: 830 mm
Motor: 1.5 kW
Length: 1500 mm
Width: 1600 mm
Height: 1900 mm
Weight: 590 kg
Saw frame: Double column
Band dimensions: 3270x27x0,9 mm
Band speed: 40/80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 350x260 mm
Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm
Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm
Working height: 830 mm
Motor: 1.5 kW
Length: 1500 mm
Width: 1600 mm
Height: 1900 mm
Weight: 590 kg
Band dimensions: 3270x27x0,9 mm
Band speed: 40/80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 350x260 mm
Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm
Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm
Working height: 830 mm
Motor: 1.5 kW
Length: 1500 mm
Width: 1600 mm
Height: 1900 mm
Weight: 590 kg
3
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 25 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg
Drilling capacy mild steel: 25 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg
3
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 25 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg
Drilling capacy mild steel: 25 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg
Taper: MK 3
Distance spindle - column: 280 mm
Revs: 125 - 4000 (2 Stufen) r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
max. drilling depth: 125 mm
Column diameter: 110 mm
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Length: 520 mm
Width: 820 mm
Height: 1900 mm
Weight: 275 kg
4
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 20 mm
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
Drilling capacy mild steel: 20 mm
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
4
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 23 mm
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 20 - 2000 r.p.m.
Motor: 1 kW
Tapping capacity: M16x1
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
Drilling capacy mild steel: 23 mm
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 20 - 2000 r.p.m.
Motor: 1 kW
Tapping capacity: M16x1
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
Taper: MK 3
Distance spindle - column: 260 mm
Revs: 20 - 2000 r.p.m.
Motor: 1 kW
Tapping capacity: M16x1
max. drilling depth: 115 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
4
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 20 mm
Taper: MK 2
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 100 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
Drilling capacy mild steel: 20 mm
Taper: MK 2
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 100 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
Taper: MK 2
Distance spindle - column: 260 mm
Revs: 30 - 3000 r.p.m.
Motor: 1 kW
Tapping capacity: M12
max. drilling depth: 100 mm
Column diameter: 110 mm
Distance spindle - table: 230 - 850 mm
Table: 420 x 340 mm
Length: 430 mm
Width: 715 mm
Height: 1800 mm
Weight: 290 kg
9
Food machinesPackaging machinery
Delfin Auriga 500 Flow wrapper, Serial: 11110, 2016, flow wrapper, jaw width 230mm, up to 120 cycles per min, infeed length 2100mm, overall length 3700mm, HMI touch screen controls, reel holder up to 500mm film, 3Ph
Delfin Auriga 500 Flow wrapper, Serial: 11110, 2016, flow wrapper, jaw width 230mm, up to 120 cycles per min, infeed length 2100mm, overall length 3700mm, HMI touch screen controls, reel holder up to 500mm film, 3Ph
3
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg
Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
pressing capacity: 150 to
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
Stroke: 300 mm
Ram: 750x500 mm
Table: 1100x700 mm
Daylight: 500 mm
Rapid speed: 10 mm/s
Working speed: 35 mm/s
Retraction speed: 22 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1400 mm
Height: 2750 mm
Weight: 7700 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 17.5 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1850 mm
Width: 1400 mm
Height: 2650 mm
Weight: 5400 kg
pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 17.5 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1850 mm
Width: 1400 mm
Height: 2650 mm
Weight: 5400 kg
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 17.5 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1850 mm
Width: 1400 mm
Height: 2650 mm
Weight: 5400 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 170 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
pressing capacity: 170 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 60 to
Stroke: 500 mm
Table: 800x500 mm
Daylight: 600 mm
Rapid speed: 120 mm/s
Working speed: 8 mm/s
Retraction speed: 58 mm/s
Motor: 5.5 kW
Length: 1100 mm
Width: 1100 mm
Height: 2350 mm
pressing capacity: 60 to
Stroke: 500 mm
Table: 800x500 mm
Daylight: 600 mm
Rapid speed: 120 mm/s
Working speed: 8 mm/s
Retraction speed: 58 mm/s
Motor: 5.5 kW
Length: 1100 mm
Width: 1100 mm
Height: 2350 mm
Stroke: 500 mm
Table: 800x500 mm
Daylight: 600 mm
Rapid speed: 120 mm/s
Working speed: 8 mm/s
Retraction speed: 58 mm/s
Motor: 5.5 kW
Length: 1100 mm
Width: 1100 mm
Height: 2350 mm
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 35 to
Stroke: 500 mm
Table: 800x500 mm
Daylight: 600 mm
Rapid speed: 125 mm/s
Working speed: 9 mm/s
Retraction speed: 68 mm/s
Motor: 4 kW
Length: 1100 mm
Width: 1100 mm
Height: 2300 mm
pressing capacity: 35 to
Stroke: 500 mm
Table: 800x500 mm
Daylight: 600 mm
Rapid speed: 125 mm/s
Working speed: 9 mm/s
Retraction speed: 68 mm/s
Motor: 4 kW
Length: 1100 mm
Width: 1100 mm
Height: 2300 mm
Stroke: 500 mm
Table: 800x500 mm
Daylight: 600 mm
Rapid speed: 125 mm/s
Working speed: 9 mm/s
Retraction speed: 68 mm/s
Motor: 4 kW
Length: 1100 mm
Width: 1100 mm
Height: 2300 mm
5
Food machinesPackaging machinery
Relco MICS 2 Induction cap sealing machine, Serial: 3493, 2018, The MICS-2 is a powerful self contained induction cap sealing machine designed to fit into most line arrangements without modification. Its in-built castors allow the machine to be moved easily from line to line. Stainless constuction, seals 20mm - 110mm diameter caps. ask for further spec.
Relco MICS 2 Induction cap sealing machine, Serial: 3493, 2018, The MICS-2 is a powerful self contained induction cap sealing machine designed to fit into most line arrangements without modification. Its in-built castors allow the machine to be moved easily from line to line. Stainless constuction, seals 20mm - 110mm diameter caps. ask for further spec.
5
Food machinesFruit and vegetable machines
NNP Rotary dip tank, Stainless rotary dip tank, variable speed, rotary drum length 900mm, rotary drum diameter 1100mm, central bottom drainage, previously used on fruit and veg, mobile, 3Ph
NNP Rotary dip tank, Stainless rotary dip tank, variable speed, rotary drum length 900mm, rotary drum diameter 1100mm, central bottom drainage, previously used on fruit and veg, mobile, 3Ph
4
Food machinesOther
Loma IQ3+ Metal detector, Stainless, belt dimensions 1100mm x 300mm, aperture 500mm x 90mm,
Loma IQ3+ Metal detector, Stainless, belt dimensions 1100mm x 300mm, aperture 500mm x 90mm,
3
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 400 to
Bending length: 6050 mm
Axes: 3
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 120 mm/s
Working speed Y-axis: 8
Retractionspeed Y-axis: 100
Back gauge travel X-axis: 750 mm
Back gauge speed X-axis: 350
Back gauge speed R-axis: 300 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1220 mm
Table width: 154 mm
Oiltank: 500 l
Motor power: 37 kW
Length: 7500 mm
Width: 2110 mm
Height: 3810 mm
Weight: 34660 kg
pressing capacity: 400 to
Bending length: 6050 mm
Axes: 3
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 120 mm/s
Working speed Y-axis: 8
Retractionspeed Y-axis: 100
Back gauge travel X-axis: 750 mm
Back gauge speed X-axis: 350
Back gauge speed R-axis: 300 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1220 mm
Table width: 154 mm
Oiltank: 500 l
Motor power: 37 kW
Length: 7500 mm
Width: 2110 mm
Height: 3810 mm
Weight: 34660 kg
Bending length: 6050 mm
Axes: 3
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 120 mm/s
Working speed Y-axis: 8
Retractionspeed Y-axis: 100
Back gauge travel X-axis: 750 mm
Back gauge speed X-axis: 350
Back gauge speed R-axis: 300 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1220 mm
Table width: 154 mm
Oiltank: 500 l
Motor power: 37 kW
Length: 7500 mm
Width: 2110 mm
Height: 3810 mm
Weight: 34660 kg
3
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg
4
Metal working and machine toolsOther
LÄPPMASCHINE Hahn & Kolb LHD 0Maschine aus staatlicher Institution/Sehr gepflegt-Läppscheibendurchmesser 400mm-Max. Werkstückhöhe 110mm-Max. Entfernung zwischen den Gussläppscheiben 80mm-Drehzahlbereich 40-80-160 U/min-Drehzahl-Antriebsmotor 700-1400-2800U/min-Gesamtleistung 1,8-2,7KW-Abdreheinrichtung handbetätigtHebkn Au Sevdkvfo Tol-Originaldokumentation-Gut erhaltener OriginalzustandAbmaße:LxBxH 1,4x1,3x1,9 Meter /Gewicht 1600Kg
LÄPPMASCHINE Hahn & Kolb LHD 0
Maschine aus staatlicher Institution/Sehr gepflegt
-Läppscheibendurchmesser 400mm
-Max. Werkstückhöhe 110mm
-Max. Entfernung zwischen den Gussläppscheiben 80mm
-Drehzahlbereich 40-80-160 U/min
-Drehzahl-Antriebsmotor 700-1400-2800U/min
-Gesamtleistung 1,8-2,7KW
-Abdreheinrichtung handbetätigt
Hebkn Au Sevdkvfo Tol
-Originaldokumentation
-Gut erhaltener Originalzustand
Abmaße:
LxBxH 1,4x1,3x1,9 Meter /Gewicht 1600Kg
Maschine aus staatlicher Institution/Sehr gepflegt
-Läppscheibendurchmesser 400mm
-Max. Werkstückhöhe 110mm
-Max. Entfernung zwischen den Gussläppscheiben 80mm
-Drehzahlbereich 40-80-160 U/min
-Drehzahl-Antriebsmotor 700-1400-2800U/min
-Gesamtleistung 1,8-2,7KW
-Abdreheinrichtung handbetätigt
Hebkn Au Sevdkvfo Tol
-Originaldokumentation
-Gut erhaltener Originalzustand
Abmaße:
LxBxH 1,4x1,3x1,9 Meter /Gewicht 1600Kg