1
Metal working and machine toolsAccessories and spare partsBolster plates
Plattenlänge: 1200 mmPlattenbreite: 840 mmPlattenhöhe: 150 mmT-Nuten - Abstand: 100 mmT-Nuten - Breite: 38/22 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 0,5 tRaumbedarf ca.: m
Plattenlänge: 1200 mm
Plattenbreite: 840 mm
Plattenhöhe: 150 mm
T-Nuten - Abstand: 100 mm
T-Nuten - Breite: 38/22 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 0,5 t
Raumbedarf ca.: m
Plattenbreite: 840 mm
Plattenhöhe: 150 mm
T-Nuten - Abstand: 100 mm
T-Nuten - Breite: 38/22 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 0,5 t
Raumbedarf ca.: m
Metal working and machine toolsSheet metal working machinesFeed straighteners
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
4
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
_thumb.jpeg "Show advert")
2
Printing machineryPost press machinesPile elevators
Polar LW 1000-4 EV lift
Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)
The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.
Customer benefits
Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures
Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant
Substantial reduction of occupational diseases
Technical data
Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)
Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)
Stroke : max.850 mm (33.46 in)
Lifting height : max. 85 cm
Carrying capacity : max.1,000 kg (2,205 lbs)
Net weight : 550 kg
Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)
Power : 0,75 kW
Polar LW 1000-4 EV lift
Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)
The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.
Customer benefits
Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures
Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant
Substantial reduction of occupational diseases
Technical data
Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)
Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)
Stroke : max.850 mm (33.46 in)
Lifting height : max. 85 cm
Carrying capacity : max.1,000 kg (2,205 lbs)
Net weight : 550 kg
Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)
Power : 0,75 kW
Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)
The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.
Customer benefits
Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures
Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant
Substantial reduction of occupational diseases
Technical data
Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)
Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)
Stroke : max.850 mm (33.46 in)
Lifting height : max. 85 cm
Carrying capacity : max.1,000 kg (2,205 lbs)
Net weight : 550 kg
Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)
Power : 0,75 kW
9
Food machinesBakery-, pastry equipmentCutting machines
Eillert G1500 belt slicer, stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph
Eillert G1500 belt slicer, stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph
7
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 3270 x 27 x 0,9 mm
Band speed continous: 40 - 80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 330 x 290 mm
Cutting capacity 45°: round 210 mm, square 210 mm, rectangular 210 x 260 mm
Cutting capacity 60°: round 110 mm, square 110 mm, rectangular 110 x 150 mm
Working height: 840 mm
Coolant pump motor: 0.06 kW
Hydraulic motor: 0.75 kW
Motor: 1.5 kW
Length: 3070 mm
Width: 2060 mm
Height: 1930 mm
Transport dimensions: 2400 x 1700 x 1700 mm
Weight: 1210 kg
Saw frame: Double column
Band dimensions: 3270 x 27 x 0,9 mm
Band speed continous: 40 - 80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 330 x 290 mm
Cutting capacity 45°: round 210 mm, square 210 mm, rectangular 210 x 260 mm
Cutting capacity 60°: round 110 mm, square 110 mm, rectangular 110 x 150 mm
Working height: 840 mm
Coolant pump motor: 0.06 kW
Hydraulic motor: 0.75 kW
Motor: 1.5 kW
Length: 3070 mm
Width: 2060 mm
Height: 1930 mm
Transport dimensions: 2400 x 1700 x 1700 mm
Weight: 1210 kg
Band dimensions: 3270 x 27 x 0,9 mm
Band speed continous: 40 - 80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 330 x 290 mm
Cutting capacity 45°: round 210 mm, square 210 mm, rectangular 210 x 260 mm
Cutting capacity 60°: round 110 mm, square 110 mm, rectangular 110 x 150 mm
Working height: 840 mm
Coolant pump motor: 0.06 kW
Hydraulic motor: 0.75 kW
Motor: 1.5 kW
Length: 3070 mm
Width: 2060 mm
Height: 1930 mm
Transport dimensions: 2400 x 1700 x 1700 mm
Weight: 1210 kg
2
Metal working and machine toolsSanding machines
Grinding belt dimensions: 150 x 2.000 mm
Tube diameter: 20 - 114,3
Hand lever adjustment: 1
Handwheel adjustment: 1
Motor power: 4 kW
Weight: 270 kg
Grinding belt dimensions: 150 x 2.000 mm
Tube diameter: 20 - 114,3
Hand lever adjustment: 1
Handwheel adjustment: 1
Motor power: 4 kW
Weight: 270 kg
Tube diameter: 20 - 114,3
Hand lever adjustment: 1
Handwheel adjustment: 1
Motor power: 4 kW
Weight: 270 kg
4
Printing machineryOffset printing press10-color
In pursuit of efficient high quality printing machinery, Worldly develops machines featuring user friendly automatic operation and high stability of mechanical equipment made by specialized technology and deliberate design. Throughout the use of a central control system, including PLC control, human-machine touch screen interface and automatic alarm systems, technical operators can easily and accurately monitor the required printing quality. The splicing design is a collaboration of vertical and horizontal movement splicers, combined with tracking pressure rollers this design insures accurate and stable splicing. An Eco- Friendly Exhaust Heat Recycling system is specially built into the design, reducing high amounts of energy costs and also helps save the environmental at the same time.
Ink resistance material of furnishing roller optimized ink circulation, avoid cylinder cell ink stock and improve printing quality. The roller driven by motorized can manual or automatic mode synchronized with printing speed.
Quick change over doctor blade holder design
Doctor blade quick locking by tool-less. The group allows horizontal, vertical and angular adjustment for the doctor blade position on engraved cylinder.
Heating recycling energy saving
Heating recycling & energy saving : Exclusive energy-saving design to increase the recycling benefit of investment costs. The system is constructed of connection ducts, ventilation modules, hood drying chambers, and central exhaust system. Recycle waste hot air to save energy consumption.
Centralized control system allow man power saving
Centralized control system integrated operator HMI, web video monitor, and color registration panel for easy access working parameter and man power saving. Automatic longitudinal and side-lay register control system. High flexibility master mark setting. Also able to save various parameter conditions to job memory.
Latest E.L.S technology
All unwinder, in-feed unit, printing units, out-feed unit,, rewinder are individually driven by AC servo motors and drives. The cylinder has direct driven to optimized the ransmission with low mechanical loss. Whole machine automation and tension controlled by high performance PLC system.
Specifications
Model WRP-HI
Maximum Machine Speed 270 m/min
Printing Maximum Speed 250 m/min
Printing Width 1000 mm / 1200 mm / 1300 mm
Printing Cylinder 350 mm - 900 mm
Material Diameter Ø800 mm / Ø1000 mm
Applications
PET, CPP, PVC,OPP, PP, PE, Nylon, Aluminum Foil, Paper.
In pursuit of efficient high quality printing machinery, Worldly develops machines featuring user friendly automatic operation and high stability of mechanical equipment made by specialized technology and deliberate design. Throughout the use of a central control system, including PLC control, human-machine touch screen interface and automatic alarm systems, technical operators can easily and accurately monitor the required printing quality. The splicing design is a collaboration of vertical and horizontal movement splicers, combined with tracking pressure rollers this design insures accurate and stable splicing. An Eco- Friendly Exhaust Heat Recycling system is specially built into the design, reducing high amounts of energy costs and also helps save the environmental at the same time.
Ink resistance material of furnishing roller optimized ink circulation, avoid cylinder cell ink stock and improve printing quality. The roller driven by motorized can manual or automatic mode synchronized with printing speed.
Quick change over doctor blade holder design
Doctor blade quick locking by tool-less. The group allows horizontal, vertical and angular adjustment for the doctor blade position on engraved cylinder.
Heating recycling energy saving
Heating recycling & energy saving : Exclusive energy-saving design to increase the recycling benefit of investment costs. The system is constructed of connection ducts, ventilation modules, hood drying chambers, and central exhaust system. Recycle waste hot air to save energy consumption.
Centralized control system allow man power saving
Centralized control system integrated operator HMI, web video monitor, and color registration panel for easy access working parameter and man power saving. Automatic longitudinal and side-lay register control system. High flexibility master mark setting. Also able to save various parameter conditions to job memory.
Latest E.L.S technology
All unwinder, in-feed unit, printing units, out-feed unit,, rewinder are individually driven by AC servo motors and drives. The cylinder has direct driven to optimized the ransmission with low mechanical loss. Whole machine automation and tension controlled by high performance PLC system.
Specifications
Model WRP-HI
Maximum Machine Speed 270 m/min
Printing Maximum Speed 250 m/min
Printing Width 1000 mm / 1200 mm / 1300 mm
Printing Cylinder 350 mm - 900 mm
Material Diameter Ø800 mm / Ø1000 mm
Applications
PET, CPP, PVC,OPP, PP, PE, Nylon, Aluminum Foil, Paper.
Ink resistance material of furnishing roller optimized ink circulation, avoid cylinder cell ink stock and improve printing quality. The roller driven by motorized can manual or automatic mode synchronized with printing speed.
Quick change over doctor blade holder design
Doctor blade quick locking by tool-less. The group allows horizontal, vertical and angular adjustment for the doctor blade position on engraved cylinder.
Heating recycling energy saving
Heating recycling & energy saving : Exclusive energy-saving design to increase the recycling benefit of investment costs. The system is constructed of connection ducts, ventilation modules, hood drying chambers, and central exhaust system. Recycle waste hot air to save energy consumption.
Centralized control system allow man power saving
Centralized control system integrated operator HMI, web video monitor, and color registration panel for easy access working parameter and man power saving. Automatic longitudinal and side-lay register control system. High flexibility master mark setting. Also able to save various parameter conditions to job memory.
Latest E.L.S technology
All unwinder, in-feed unit, printing units, out-feed unit,, rewinder are individually driven by AC servo motors and drives. The cylinder has direct driven to optimized the ransmission with low mechanical loss. Whole machine automation and tension controlled by high performance PLC system.
Specifications
Model WRP-HI
Maximum Machine Speed 270 m/min
Printing Maximum Speed 250 m/min
Printing Width 1000 mm / 1200 mm / 1300 mm
Printing Cylinder 350 mm - 900 mm
Material Diameter Ø800 mm / Ø1000 mm
Applications
PET, CPP, PVC,OPP, PP, PE, Nylon, Aluminum Foil, Paper.
5
Metal working and machine toolsWelding machinesWelding tables
Working area: 1500 x 1000 mm
Table height: 850 mm
load capacity: 8000 kg
Boring Ø: 28 mm
Weight: 541 kg
Working area: 1500 x 1000 mm
Table height: 850 mm
load capacity: 8000 kg
Boring Ø: 28 mm
Weight: 541 kg
Table height: 850 mm
load capacity: 8000 kg
Boring Ø: 28 mm
Weight: 541 kg
2
Metal working and machine toolsPressesEccentric presses
pressing capacity: 80 to
Tonnage rating point: 4 mm
Table length: 600 mm
Table width: 900 mm
Hole in table: 200 mm
Stroke: 1 - 110 mm
Strokes: 60 1/min
Ram guides: 6
Ram adjustment: 80 mm
Ram hole: 50 mm
Throat depth: 300 mm
Daylight: 400 mm
Motor: 7.5 kW
Length: 1600 mm
Width: 1500 mm
Height: 2750 mm
Weight: 5700 kg
pressing capacity: 80 to
Tonnage rating point: 4 mm
Table length: 600 mm
Table width: 900 mm
Hole in table: 200 mm
Stroke: 1 - 110 mm
Strokes: 60 1/min
Ram guides: 6
Ram adjustment: 80 mm
Ram hole: 50 mm
Throat depth: 300 mm
Daylight: 400 mm
Motor: 7.5 kW
Length: 1600 mm
Width: 1500 mm
Height: 2750 mm
Weight: 5700 kg
Tonnage rating point: 4 mm
Table length: 600 mm
Table width: 900 mm
Hole in table: 200 mm
Stroke: 1 - 110 mm
Strokes: 60 1/min
Ram guides: 6
Ram adjustment: 80 mm
Ram hole: 50 mm
Throat depth: 300 mm
Daylight: 400 mm
Motor: 7.5 kW
Length: 1600 mm
Width: 1500 mm
Height: 2750 mm
Weight: 5700 kg
7
Food machinesOther
Campo Vibratory conveyor, Stainless, vibro conveyor, conveyor dimensions 1500mm x 500mm, on stainless frame, with dewatering mesh, side discharge, 3Ph
Campo Vibratory conveyor, Stainless, vibro conveyor, conveyor dimensions 1500mm x 500mm, on stainless frame, with dewatering mesh, side discharge, 3Ph
3
Metal working and machine toolsSheet metal working machinesBending machines
pressing capacity: 10 to
Stroke: 185 mm
Max. bending capacity - mild steel: 150x8 mm
Table: 450x900 mm
Height of pins: 150 mm
Pin diameter: 60 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 1.1 kW
Working height: 915 mm
Length: 900 mm
Width: 450 mm
Height: 1130 mm
Weight: 250 kg
pressing capacity: 10 to
Stroke: 185 mm
Max. bending capacity - mild steel: 150x8 mm
Table: 450x900 mm
Height of pins: 150 mm
Pin diameter: 60 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 1.1 kW
Working height: 915 mm
Length: 900 mm
Width: 450 mm
Height: 1130 mm
Weight: 250 kg
Stroke: 185 mm
Max. bending capacity - mild steel: 150x8 mm
Table: 450x900 mm
Height of pins: 150 mm
Pin diameter: 60 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 1.1 kW
Working height: 915 mm
Length: 900 mm
Width: 450 mm
Height: 1130 mm
Weight: 250 kg
4
Food machinesOther
Eriez 56C Vibratory conveyor, Stainless, dimensions 900mm x 450mm, discharge height 1500mm, mobile, 1Ph
Eriez 56C Vibratory conveyor, Stainless, dimensions 900mm x 450mm, discharge height 1500mm, mobile, 1Ph
3
Metal working and machine toolsSheet metal working machinesBending machines
pressing capacity: 20 to
Stroke: 185 mm
Max. bending capacity - mild steel: 200 x 12 mm
Table: 480 x 1060 mm
Height of pins: 200 mm
Pin diameter: 80 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 2.2 kW
Working height: 930 mm
Length: 1150 mm
Width: 480 mm
Height: 1200 mm
Weight: 530 kg
pressing capacity: 20 to
Stroke: 185 mm
Max. bending capacity - mild steel: 200 x 12 mm
Table: 480 x 1060 mm
Height of pins: 200 mm
Pin diameter: 80 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 2.2 kW
Working height: 930 mm
Length: 1150 mm
Width: 480 mm
Height: 1200 mm
Weight: 530 kg
Stroke: 185 mm
Max. bending capacity - mild steel: 200 x 12 mm
Table: 480 x 1060 mm
Height of pins: 200 mm
Pin diameter: 80 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 2.2 kW
Working height: 930 mm
Length: 1150 mm
Width: 480 mm
Height: 1200 mm
Weight: 530 kg
11
Food machinesOther
Leonhardt AG2 Twin head dosing machine, Serial: 1401449, 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph
Leonhardt AG2 Twin head dosing machine, Serial: 1401449, 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph
12
Metal working and machine toolsSawingCutting saws
Cutting diameter: 175 mm
Saw blade dimensions: bore 30, min. 450, max. 550 mm
Speed range: 2800 rpm
Working height: 820 mm
Suction stub: 1 x 120 - 1 x 150
Total power: 5,5 kW
Weight of machine: 400 kg
Space requirement (W x D x H): 1,4 x 1,0 x 1,8 m
Condition: very good
Roller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabled
Accessory: documentation
Cutting diameter: 175 mm
Saw blade dimensions: bore 30, min. 450, max. 550 mm
Speed range: 2800 rpm
Working height: 820 mm
Suction stub: 1 x 120 - 1 x 150
Total power: 5,5 kW
Weight of machine: 400 kg
Space requirement (W x D x H): 1,4 x 1,0 x 1,8 m
Condition: very good
Roller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabled
Accessory: documentation
Saw blade dimensions: bore 30, min. 450, max. 550 mm
Speed range: 2800 rpm
Working height: 820 mm
Suction stub: 1 x 120 - 1 x 150
Total power: 5,5 kW
Weight of machine: 400 kg
Space requirement (W x D x H): 1,4 x 1,0 x 1,8 m
Condition: very good
Roller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabled
Accessory: documentation
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1500 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Bending length: 1500 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
4
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18409
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 200 mm
Opening width: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3.25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Additional information & extras
Core pull: 1 pcs
Ref. no.: 18409
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 200 mm
Opening width: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3.25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Additional information & extras
Core pull: 1 pcs
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 200 mm
Opening width: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3.25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Additional information & extras
Core pull: 1 pcs
11
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 1050 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
Bending length: 1050 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2050 mm
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg
3
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1000 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1000 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
Cylinder fix or moveable: fix
Bending length: 1000 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
5
Metal working and machine toolsCutting machines and equipmentWater-jet cutting equipment and machines
Cutting area: 4000x2000 mm
Nominal power: 37 kW
Max. material thickness: Max. Materialstärken
Steel: 200 mm
Stainless Steel: 150 mm
Aluminium: 120 mm
Glass: 100 mm
PVC: 150 mm
Number of cutting heads: 1
Effective cutting range x axis: 4000 mm
Effective cutting range y axis: 2000 mm
Z axis travel: 200 mm
Max. simultaneous positioning speed: 85 m/min
Max. cutting speed: 20 m/min
Machine tolerance according to VDI/DGQ 3441: +/- 0,05 mm/m
Repeatability precision: +/- 0,025 mm/m
Tank volume: 8 m3
Maximum supported weight for the workpiece: 790 kg/m2
High pressure pump nominal power: 37 kW / 50 PS
High pressure pumpb maximum working pressure: 4.1 bar
Maximum flow: 4 l/min
Cutting area: 4000x2000 mm
Nominal power: 37 kW
Max. material thickness: Max. Materialstärken
Steel: 200 mm
Stainless Steel: 150 mm
Aluminium: 120 mm
Glass: 100 mm
PVC: 150 mm
Number of cutting heads: 1
Effective cutting range x axis: 4000 mm
Effective cutting range y axis: 2000 mm
Z axis travel: 200 mm
Max. simultaneous positioning speed: 85 m/min
Max. cutting speed: 20 m/min
Machine tolerance according to VDI/DGQ 3441: +/- 0,05 mm/m
Repeatability precision: +/- 0,025 mm/m
Tank volume: 8 m3
Maximum supported weight for the workpiece: 790 kg/m2
High pressure pump nominal power: 37 kW / 50 PS
High pressure pumpb maximum working pressure: 4.1 bar
Maximum flow: 4 l/min
Nominal power: 37 kW
Max. material thickness: Max. Materialstärken
Steel: 200 mm
Stainless Steel: 150 mm
Aluminium: 120 mm
Glass: 100 mm
PVC: 150 mm
Number of cutting heads: 1
Effective cutting range x axis: 4000 mm
Effective cutting range y axis: 2000 mm
Z axis travel: 200 mm
Max. simultaneous positioning speed: 85 m/min
Max. cutting speed: 20 m/min
Machine tolerance according to VDI/DGQ 3441: +/- 0,05 mm/m
Repeatability precision: +/- 0,025 mm/m
Tank volume: 8 m3
Maximum supported weight for the workpiece: 790 kg/m2
High pressure pump nominal power: 37 kW / 50 PS
High pressure pumpb maximum working pressure: 4.1 bar
Maximum flow: 4 l/min
2
Metal working and machine toolsLathes
Swing over bed: 760 mm
Distance between centers: 3000 mm
Centre height: 380 mm
Spindle bore: 132 mm
swing over cross slide: 520 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: 7,5 - 1015 rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: Array
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4470 kg
Swing over bed: 760 mm
Distance between centers: 3000 mm
Centre height: 380 mm
Spindle bore: 132 mm
swing over cross slide: 520 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: 7,5 - 1015 rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: Array
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4470 kg
Distance between centers: 3000 mm
Centre height: 380 mm
Spindle bore: 132 mm
swing over cross slide: 520 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: 7,5 - 1015 rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: Array
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4470 kg
14
Metal working and machine toolsSanding machinesInternal grinding machines
Internal grinding diameter min.: 1 mm
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good
Well-maintained machine from a German automobile manufacturer
Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
Internal grinding diameter min.: 1 mm
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good
Well-maintained machine from a German automobile manufacturer
Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good
Well-maintained machine from a German automobile manufacturer
Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
3
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 60 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
Punching power: 60 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
1
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Daylight: 750 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2350 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Daylight: 750 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2350 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Daylight: 750 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2350 kg
1
Metal working and machine toolsPressesWorkshop press
pressing capacity: 30 to
Cylinder fix or moveable: horizontal moveable
Stroke: 200 mm
Distance between columns: 775 mm
Piston diameter: 125x80 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 1800 mm
Weight: 400 kg
pressing capacity: 30 to
Cylinder fix or moveable: horizontal moveable
Stroke: 200 mm
Distance between columns: 775 mm
Piston diameter: 125x80 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 1800 mm
Weight: 400 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 200 mm
Distance between columns: 775 mm
Piston diameter: 125x80 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 1800 mm
Weight: 400 kg
9
Food machinesPackaging machinery
Teknoice Multiline Automatic top-seal multi-lane wrapper machine, Serial: WR191505, 2019 Automatic top-seal multi-lane wrapper machine, flow-pack type with continuous cycle operation, capacity 50 cycles/min. max. for connection to extrusion line and/or moulded stick line. Stainless steel construction, longitudinal towing-sealing rollers, transversal sealing and cutting jaws. Heating system of sealing jaws and rollers by a double circuit of hot oil, electrically heated, a TEKNOICE innovation, thanks to which, we eliminated all resistances of sealing elements with considerable operation advantages (less machine stoppages for malfunctioning of probes and resistances, less maintenance, higher hygiene standards, top quality of sealing). Reel holder per each raw, placed directly onto the wrapper. Electronic control panel with touch screen. Watertight electrical board, placed in front of the machine or aside (according to the model of the wrapper) for an easy access and mainten
Teknoice Multiline Automatic top-seal multi-lane wrapper machine, Serial: WR191505, 2019 Automatic top-seal multi-lane wrapper machine, flow-pack type with continuous cycle operation, capacity 50 cycles/min. max. for connection to extrusion line and/or moulded stick line. Stainless steel construction, longitudinal towing-sealing rollers, transversal sealing and cutting jaws. Heating system of sealing jaws and rollers by a double circuit of hot oil, electrically heated, a TEKNOICE innovation, thanks to which, we eliminated all resistances of sealing elements with considerable operation advantages (less machine stoppages for malfunctioning of probes and resistances, less maintenance, higher hygiene standards, top quality of sealing). Reel holder per each raw, placed directly onto the wrapper. Electronic control panel with touch screen. Watertight electrical board, placed in front of the machine or aside (according to the model of the wrapper) for an easy access and mainten
5
Metal working and machine toolsDrilling machines and boring millsTable boring mills
x-Weg: 2000 mmy-Weg: 1600 mmz-Weg: 1000 mmStirnmodul am großen Zahnende: Siemens 850M mmw-Achse: 600 mmb-Achse: 2,7 U/minSpindelaufnahme ISO: 50Drehmoment: 2350 NmLeistung: 40 kwSpindeldrehzahlen: 28-2800 U/minKühlung: max 7 barVorschub: 1-3000 mm/minPalettengröße: 1500x1500 mmTischbelastung: 8 tT-Nuten: 22H7x 22 mm TiefNutenabstand: 200 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 2000 mm
y-Weg: 1600 mm
z-Weg: 1000 mm
Stirnmodul am großen Zahnende: Siemens 850M mm
w-Achse: 600 mm
b-Achse: 2,7 U/min
Spindelaufnahme ISO: 50
Drehmoment: 2350 Nm
Leistung: 40 kw
Spindeldrehzahlen: 28-2800 U/min
Kühlung: max 7 bar
Vorschub: 1-3000 mm/min
Palettengröße: 1500x1500 mm
Tischbelastung: 8 t
T-Nuten: 22H7x 22 mm Tief
Nutenabstand: 200 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 1600 mm
z-Weg: 1000 mm
Stirnmodul am großen Zahnende: Siemens 850M mm
w-Achse: 600 mm
b-Achse: 2,7 U/min
Spindelaufnahme ISO: 50
Drehmoment: 2350 Nm
Leistung: 40 kw
Spindeldrehzahlen: 28-2800 U/min
Kühlung: max 7 bar
Vorschub: 1-3000 mm/min
Palettengröße: 1500x1500 mm
Tischbelastung: 8 t
T-Nuten: 22H7x 22 mm Tief
Nutenabstand: 200 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 160 mmx-Weg: 4000 mmy-Weg: 2200 mmz-Weg: 1500 mmTraghülse: 270 mmSpindeldrehzahlen: 20-2000 U/minSteuerung: HeidenhainTyp: TNC530iTischfläche: 3000x1600 mmTischbelastung: 40 tSpindelaufnahme ISO: 50Spindelantrieb: 50 kWT-Nuten - Breite: 28 mmAnzahl der T-Nuten: 9Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 160 mm
x-Weg: 4000 mm
y-Weg: 2200 mm
z-Weg: 1500 mm
Traghülse: 270 mm
Spindeldrehzahlen: 20-2000 U/min
Steuerung: Heidenhain
Typ: TNC530i
Tischfläche: 3000x1600 mm
Tischbelastung: 40 t
Spindelaufnahme ISO: 50
Spindelantrieb: 50 kW
T-Nuten - Breite: 28 mm
Anzahl der T-Nuten: 9
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 4000 mm
y-Weg: 2200 mm
z-Weg: 1500 mm
Traghülse: 270 mm
Spindeldrehzahlen: 20-2000 U/min
Steuerung: Heidenhain
Typ: TNC530i
Tischfläche: 3000x1600 mm
Tischbelastung: 40 t
Spindelaufnahme ISO: 50
Spindelantrieb: 50 kW
T-Nuten - Breite: 28 mm
Anzahl der T-Nuten: 9
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
8
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 150 mmx-Weg: 3000 mmy-Weg: 2000 mmz-Weg: 1500 mmw-Achse: 700 mmSpindelaufnahme: ISO 50Steuerung: SiemensTyp: 850 M mmTischfläche: 2000x1600 mmTischbelastung: 12000 kgDrehzahl: 12-3000 U/minSpindelantrieb: 30 kWVorschub: 0-6 m/minGesamtleistungsbedarf: 60 kWMaschinengewicht ca.: 40 tRaumbedarf ca.: 8x6,3x5,4 m
Spindeldurchmesser: 150 mm
x-Weg: 3000 mm
y-Weg: 2000 mm
z-Weg: 1500 mm
w-Achse: 700 mm
Spindelaufnahme: ISO 50
Steuerung: Siemens
Typ: 850 M mm
Tischfläche: 2000x1600 mm
Tischbelastung: 12000 kg
Drehzahl: 12-3000 U/min
Spindelantrieb: 30 kW
Vorschub: 0-6 m/min
Gesamtleistungsbedarf: 60 kW
Maschinengewicht ca.: 40 t
Raumbedarf ca.: 8x6,3x5,4 m
x-Weg: 3000 mm
y-Weg: 2000 mm
z-Weg: 1500 mm
w-Achse: 700 mm
Spindelaufnahme: ISO 50
Steuerung: Siemens
Typ: 850 M mm
Tischfläche: 2000x1600 mm
Tischbelastung: 12000 kg
Drehzahl: 12-3000 U/min
Spindelantrieb: 30 kW
Vorschub: 0-6 m/min
Gesamtleistungsbedarf: 60 kW
Maschinengewicht ca.: 40 t
Raumbedarf ca.: 8x6,3x5,4 m
10
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 150 mmx-Weg: 2500 mmy-Weg: 1600 mmz-Weg: 1000 mmSpindelaufnahme ISO: 50Drehzahl: 4-1120 U/minVorschub: 5-2000 mm/minBohrspindelhub: 580 mmHauptantriebsmotor: 45 kWTischfläche: 1600x2000 mmTischbelastung: 12,5 tSteuerung: HeidenhainTyp: TNC 410Werkstückgewicht: 15000 kgGesamtleistungsbedarf: 80 kWMaschinengewicht ca.: tRaumbedarf ca.: 6,5x5x5x4 m
Spindeldurchmesser: 150 mm
x-Weg: 2500 mm
y-Weg: 1600 mm
z-Weg: 1000 mm
Spindelaufnahme ISO: 50
Drehzahl: 4-1120 U/min
Vorschub: 5-2000 mm/min
Bohrspindelhub: 580 mm
Hauptantriebsmotor: 45 kW
Tischfläche: 1600x2000 mm
Tischbelastung: 12,5 t
Steuerung: Heidenhain
Typ: TNC 410
Werkstückgewicht: 15000 kg
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 6,5x5x5x4 m
x-Weg: 2500 mm
y-Weg: 1600 mm
z-Weg: 1000 mm
Spindelaufnahme ISO: 50
Drehzahl: 4-1120 U/min
Vorschub: 5-2000 mm/min
Bohrspindelhub: 580 mm
Hauptantriebsmotor: 45 kW
Tischfläche: 1600x2000 mm
Tischbelastung: 12,5 t
Steuerung: Heidenhain
Typ: TNC 410
Werkstückgewicht: 15000 kg
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 6,5x5x5x4 m
10
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 150 mmx-Weg: 2005 mmy-Weg: 1860 mmz-Achse: 1620 mmw-Achse: 706 mmSteuerung: Siemens 840 C SW5.1Drehzahl: 2500 U/minAufspannfläche: 2500 x 2000 mmSpindelaufnahme ISO: 50Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 150 mm
x-Weg: 2005 mm
y-Weg: 1860 mm
z-Achse: 1620 mm
w-Achse: 706 mm
Steuerung: Siemens 840 C SW5.1
Drehzahl: 2500 U/min
Aufspannfläche: 2500 x 2000 mm
Spindelaufnahme ISO: 50
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 2005 mm
y-Weg: 1860 mm
z-Achse: 1620 mm
w-Achse: 706 mm
Steuerung: Siemens 840 C SW5.1
Drehzahl: 2500 U/min
Aufspannfläche: 2500 x 2000 mm
Spindelaufnahme ISO: 50
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 132 mmx-Weg: 2000 mmy-Weg: 1350 mmz-Weg: 2340 mmTischfläche: 2000x1500 mmSpindelhub: 1000 mmDrehzahl: 3,5-1000 U/minPlanschieber: 3,5-100 U/minVorschub: 2250 mm/minSpindelaufnahme ISO: 50Tischbelastung: 15000 kgGesamtleistungsbedarf: kWMaschinengewicht ca.: 24,5 tRaumbedarf ca.: 6,3x5x3,5 m
Spindeldurchmesser: 132 mm
x-Weg: 2000 mm
y-Weg: 1350 mm
z-Weg: 2340 mm
Tischfläche: 2000x1500 mm
Spindelhub: 1000 mm
Drehzahl: 3,5-1000 U/min
Planschieber: 3,5-100 U/min
Vorschub: 2250 mm/min
Spindelaufnahme ISO: 50
Tischbelastung: 15000 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 24,5 t
Raumbedarf ca.: 6,3x5x3,5 m
x-Weg: 2000 mm
y-Weg: 1350 mm
z-Weg: 2340 mm
Tischfläche: 2000x1500 mm
Spindelhub: 1000 mm
Drehzahl: 3,5-1000 U/min
Planschieber: 3,5-100 U/min
Vorschub: 2250 mm/min
Spindelaufnahme ISO: 50
Tischbelastung: 15000 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 24,5 t
Raumbedarf ca.: 6,3x5x3,5 m
10
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 130 mmx-Weg: mmy-Weg: 1750 mmz-Weg: 600 mmw-Achse: 800 mmSpindelaufnahme: SK 50Steuerung: Siemens 8MTyp: 8M mmTischfläche: 1500x1300 mmTischbelastung: . kgDrehzahl: . U/minSpindelantrieb: . kWVorschub: . m/minGesamtleistungsbedarf: . kWMaschinengewicht ca.: 75 tRaumbedarf ca.: . m
Spindeldurchmesser: 130 mm
x-Weg: mm
y-Weg: 1750 mm
z-Weg: 600 mm
w-Achse: 800 mm
Spindelaufnahme: SK 50
Steuerung: Siemens 8M
Typ: 8M mm
Tischfläche: 1500x1300 mm
Tischbelastung: . kg
Drehzahl: . U/min
Spindelantrieb: . kW
Vorschub: . m/min
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: 75 t
Raumbedarf ca.: . m
x-Weg: mm
y-Weg: 1750 mm
z-Weg: 600 mm
w-Achse: 800 mm
Spindelaufnahme: SK 50
Steuerung: Siemens 8M
Typ: 8M mm
Tischfläche: 1500x1300 mm
Tischbelastung: . kg
Drehzahl: . U/min
Spindelantrieb: . kW
Vorschub: . m/min
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: 75 t
Raumbedarf ca.: . m
3
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 125 mmx-Weg: 3000 mmy-Weg: 1500 mmSteuerung: Heidenhain TNC 355Aufnahme ISO: 50w-Achse: 600 mmTischabmessung: 1200 x 1500 mmTischbelastung: 5 tSpindeldrehzahlen: 12 - 2300 U/minSpannung: 380 VGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 125 mm
x-Weg: 3000 mm
y-Weg: 1500 mm
Steuerung: Heidenhain TNC 355
Aufnahme ISO: 50
w-Achse: 600 mm
Tischabmessung: 1200 x 1500 mm
Tischbelastung: 5 t
Spindeldrehzahlen: 12 - 2300 U/min
Spannung: 380 V
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 3000 mm
y-Weg: 1500 mm
Steuerung: Heidenhain TNC 355
Aufnahme ISO: 50
w-Achse: 600 mm
Tischabmessung: 1200 x 1500 mm
Tischbelastung: 5 t
Spindeldrehzahlen: 12 - 2300 U/min
Spannung: 380 V
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 105 mmx-Weg: 2100 mmy-Weg: 1500 mmz-Weg: 1400 mmTischfläche: 1750x2000 mmDrehzahl: 16-1400 U/minTischbelastung: max. 4 tMaschinengewicht ca.: 18 t
Spindeldurchmesser: 105 mm
x-Weg: 2100 mm
y-Weg: 1500 mm
z-Weg: 1400 mm
Tischfläche: 1750x2000 mm
Drehzahl: 16-1400 U/min
Tischbelastung: max. 4 t
Maschinengewicht ca.: 18 t
x-Weg: 2100 mm
y-Weg: 1500 mm
z-Weg: 1400 mm
Tischfläche: 1750x2000 mm
Drehzahl: 16-1400 U/min
Tischbelastung: max. 4 t
Maschinengewicht ca.: 18 t
11
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Vollbohren: 150 mmBohrtiefe: 13000 mmWerkstückgewicht: 80 tSteuerung: SiemensTyp: S 7Werkstück-Durchmesser: 1250 mmWerkstückabmessungen min.: 2000 mmAufbohrdurchmesser: 450 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 160 tRaumbedarf ca.: m
Vollbohren: 150 mm
Bohrtiefe: 13000 mm
Werkstückgewicht: 80 t
Steuerung: Siemens
Typ: S 7
Werkstück-Durchmesser: 1250 mm
Werkstückabmessungen min.: 2000 mm
Aufbohrdurchmesser: 450 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 160 t
Raumbedarf ca.: m
Bohrtiefe: 13000 mm
Werkstückgewicht: 80 t
Steuerung: Siemens
Typ: S 7
Werkstück-Durchmesser: 1250 mm
Werkstückabmessungen min.: 2000 mm
Aufbohrdurchmesser: 450 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 160 t
Raumbedarf ca.: m
10
Metal working and machine toolsDrilling machines and boring millsRadial drilling machines
Bohrleistung in Stahl (Durchmesser): 100 mmAusladung: 3000 mmWerkstückhöhe - max.: 2500 mmBohrleistung in Guss: 120 mmBohrleistung in St 60 - Aufbohren: 170 mmGewindeschneiden: M120 x 2Pinolendurchmesser: 100 mmSpindelaufnahme MK: 6Drehzahl: 18-1800 U/minVorschub: 0,037-2 mm/UAufspannfläche: 1550x3150 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 14 t
Bohrleistung in Stahl (Durchmesser): 100 mm
Ausladung: 3000 mm
Werkstückhöhe - max.: 2500 mm
Bohrleistung in Guss: 120 mm
Bohrleistung in St 60 - Aufbohren: 170 mm
Gewindeschneiden: M120 x 2
Pinolendurchmesser: 100 mm
Spindelaufnahme MK: 6
Drehzahl: 18-1800 U/min
Vorschub: 0,037-2 mm/U
Aufspannfläche: 1550x3150 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 14 t
Ausladung: 3000 mm
Werkstückhöhe - max.: 2500 mm
Bohrleistung in Guss: 120 mm
Bohrleistung in St 60 - Aufbohren: 170 mm
Gewindeschneiden: M120 x 2
Pinolendurchmesser: 100 mm
Spindelaufnahme MK: 6
Drehzahl: 18-1800 U/min
Vorschub: 0,037-2 mm/U
Aufspannfläche: 1550x3150 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 14 t
10
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 200 mmx-Weg: 10500 mmy-Weg: 5750 mmz-Weg: 1600 mmw-Achse: 2000 mmSteuerung: SiemensTyp: 840 D SLDrehzahl: 920 U/minTraghülsenabmessung: 540x560 mmKühlmitteleinrichtung: 1500 lGesamtleistungsbedarf: 80 kWMaschinengewicht ca.: 130 tRaumbedarf ca.: 21,9x5x10,75 m
Spindeldurchmesser: 200 mm
x-Weg: 10500 mm
y-Weg: 5750 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D SL
Drehzahl: 920 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1500 l
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 21,9x5x10,75 m
x-Weg: 10500 mm
y-Weg: 5750 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D SL
Drehzahl: 920 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1500 l
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 21,9x5x10,75 m
10
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 180 mmx-Weg: 8800 mmy-Weg: 3500 mmSteuerung: SiemensTyp: 840 CTraghülse: Horizontalbewegung: 970 mmSpindelweg: 1200 mmTraghülsenabmessung: 400x400 mmPlattenfeld: 6000x4000 mmTischbelastung: 25000 kgTischweg: 1500 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 180 mm
x-Weg: 8800 mm
y-Weg: 3500 mm
Steuerung: Siemens
Typ: 840 C
Traghülse: Horizontalbewegung: 970 mm
Spindelweg: 1200 mm
Traghülsenabmessung: 400x400 mm
Plattenfeld: 6000x4000 mm
Tischbelastung: 25000 kg
Tischweg: 1500 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 8800 mm
y-Weg: 3500 mm
Steuerung: Siemens
Typ: 840 C
Traghülse: Horizontalbewegung: 970 mm
Spindelweg: 1200 mm
Traghülsenabmessung: 400x400 mm
Plattenfeld: 6000x4000 mm
Tischbelastung: 25000 kg
Tischweg: 1500 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
9
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 130 mmx-Weg: 10000 mmy-Weg: 3500 mmz-Weg: 1000 mmSteuerung: HeidenhainTyp: TRT1500 mmWerkstückgewicht: 300 tDrehzahl: 1620 U/minSpindelaufnahme ISO: 50Stützlager: 2Winkelkopf: 2Antriebsleistung: 76 kWPlattenfeld: 109 m²Dicke: 450 mmBohrwerksdrehtisch:: ColgarTischfläche: 2000x2500 mmTischbelastung: 20000 kgVerfahrweg: 2000 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 10000 mm
y-Weg: 3500 mm
z-Weg: 1000 mm
Steuerung: Heidenhain
Typ: TRT1500 mm
Werkstückgewicht: 300 t
Drehzahl: 1620 U/min
Spindelaufnahme ISO: 50
Stützlager: 2
Winkelkopf: 2
Antriebsleistung: 76 kW
Plattenfeld: 109 m²
Dicke: 450 mm
Bohrwerksdrehtisch:: Colgar
Tischfläche: 2000x2500 mm
Tischbelastung: 20000 kg
Verfahrweg: 2000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 10000 mm
y-Weg: 3500 mm
z-Weg: 1000 mm
Steuerung: Heidenhain
Typ: TRT1500 mm
Werkstückgewicht: 300 t
Drehzahl: 1620 U/min
Spindelaufnahme ISO: 50
Stützlager: 2
Winkelkopf: 2
Antriebsleistung: 76 kW
Plattenfeld: 109 m²
Dicke: 450 mm
Bohrwerksdrehtisch:: Colgar
Tischfläche: 2000x2500 mm
Tischbelastung: 20000 kg
Verfahrweg: 2000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
9
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 225 mmx-Weg: 8000 mmy-Weg: 5600 mmz-Weg: 2100 mmw-Achse: 1400 mmSpindeldrehzahlen - stufenlos: 0-650 U/minSpindelaufnahme ISO: 60Vorschub stufenlos: 5 - 3000 mm/minEilgang: 5 m/minMaschinengewicht ca.: 150 tRaumbedarf ca.: 12 x 5 x 8 mGesamtleistungsbedarf: 120 kW
Spindeldurchmesser: 225 mm
x-Weg: 8000 mm
y-Weg: 5600 mm
z-Weg: 2100 mm
w-Achse: 1400 mm
Spindeldrehzahlen - stufenlos: 0-650 U/min
Spindelaufnahme ISO: 60
Vorschub stufenlos: 5 - 3000 mm/min
Eilgang: 5 m/min
Maschinengewicht ca.: 150 t
Raumbedarf ca.: 12 x 5 x 8 m
Gesamtleistungsbedarf: 120 kW
x-Weg: 8000 mm
y-Weg: 5600 mm
z-Weg: 2100 mm
w-Achse: 1400 mm
Spindeldrehzahlen - stufenlos: 0-650 U/min
Spindelaufnahme ISO: 60
Vorschub stufenlos: 5 - 3000 mm/min
Eilgang: 5 m/min
Maschinengewicht ca.: 150 t
Raumbedarf ca.: 12 x 5 x 8 m
Gesamtleistungsbedarf: 120 kW
2
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 130 mmx-Weg: 7700 mmy-Weg: 1500 mmSteuerung: SiemensTyp: Sinumerik 840 CSpindelaufnahme ISO: 130Drehzahl: 1490 U/minAntriebsleistung: 45 kWPlattenfeld: 9000x6000 mmWerkstückgewicht: 100 tGesamtleistungsbedarf: kWRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 7700 mm
y-Weg: 1500 mm
Steuerung: Siemens
Typ: Sinumerik 840 C
Spindelaufnahme ISO: 130
Drehzahl: 1490 U/min
Antriebsleistung: 45 kW
Plattenfeld: 9000x6000 mm
Werkstückgewicht: 100 t
Gesamtleistungsbedarf: kW
Raumbedarf ca.: m
x-Weg: 7700 mm
y-Weg: 1500 mm
Steuerung: Siemens
Typ: Sinumerik 840 C
Spindelaufnahme ISO: 130
Drehzahl: 1490 U/min
Antriebsleistung: 45 kW
Plattenfeld: 9000x6000 mm
Werkstückgewicht: 100 t
Gesamtleistungsbedarf: kW
Raumbedarf ca.: m
6
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 110 mmx-Weg: 4440 mmy-Weg: 1500 mmz-Achse: 400 mmDrehzahl: 7-1000 U/minWerkzeugaufnahme: SK 50Spindelhub: 800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 15 tRaumbedarf ca.: m
Spindeldurchmesser: 110 mm
x-Weg: 4440 mm
y-Weg: 1500 mm
z-Achse: 400 mm
Drehzahl: 7-1000 U/min
Werkzeugaufnahme: SK 50
Spindelhub: 800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 15 t
Raumbedarf ca.: m
x-Weg: 4440 mm
y-Weg: 1500 mm
z-Achse: 400 mm
Drehzahl: 7-1000 U/min
Werkzeugaufnahme: SK 50
Spindelhub: 800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 15 t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesHeavy-duty lathes
Drehdurchmesser über Bett: 3050 mmDrehdurchmesser über Support: 2500 mmDrehlänge: 21200 mmSteuerung: SiemensTyp: 840DDrehzahl: 0,236-60 U/minPlanscheibe: 2000 mmHauptantriebsmotor: 200 kWReitstockpinolendurchmesser: 900 mmLünette: 750 mmmitlaufende Lünette: 2000 mmDicke: 330 mmWerkstückgewicht: 200 tGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: 3050 mm
Drehdurchmesser über Support: 2500 mm
Drehlänge: 21200 mm
Steuerung: Siemens
Typ: 840D
Drehzahl: 0,236-60 U/min
Planscheibe: 2000 mm
Hauptantriebsmotor: 200 kW
Reitstockpinolendurchmesser: 900 mm
Lünette: 750 mm
mitlaufende Lünette: 2000 mm
Dicke: 330 mm
Werkstückgewicht: 200 t
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehdurchmesser über Support: 2500 mm
Drehlänge: 21200 mm
Steuerung: Siemens
Typ: 840D
Drehzahl: 0,236-60 U/min
Planscheibe: 2000 mm
Hauptantriebsmotor: 200 kW
Reitstockpinolendurchmesser: 900 mm
Lünette: 750 mm
mitlaufende Lünette: 2000 mm
Dicke: 330 mm
Werkstückgewicht: 200 t
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Metal working and machine toolsLathesHeavy-duty lathes
Drehdurchmesser über Bett: 2000 mmDrehdurchmesser über Support: 1500 mmDrehlänge: 10000 mmGeschwindigkeit: 1,4 - 71 U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: 2000 mm
Drehdurchmesser über Support: 1500 mm
Drehlänge: 10000 mm
Geschwindigkeit: 1,4 - 71 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehdurchmesser über Support: 1500 mm
Drehlänge: 10000 mm
Geschwindigkeit: 1,4 - 71 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesHeavy-duty lathes
Drehdurchmesser über Bett: 1800 mmDrehdurchmesser über Support: 1200 mmDrehlänge: 16000 mmDrehdurchmesser in der Kröpfung: 2300 mmSpindeldurchmesser: 150 mmGeschwindigkeit: 1 - 300 U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: 1800 mm
Drehdurchmesser über Support: 1200 mm
Drehlänge: 16000 mm
Drehdurchmesser in der Kröpfung: 2300 mm
Spindeldurchmesser: 150 mm
Geschwindigkeit: 1 - 300 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehdurchmesser über Support: 1200 mm
Drehlänge: 16000 mm
Drehdurchmesser in der Kröpfung: 2300 mm
Spindeldurchmesser: 150 mm
Geschwindigkeit: 1 - 300 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Metal working and machine toolsLathesHeavy-duty lathes
Drehdurchmesser über Bett: 1100 mmDrehdurchmesser über Support: 710 mmDrehlänge: 6000 mmDrehmoment: 35000 NmSpitzenhöhe: 550 mmLünette: 80-300 mmWerkstückgewicht: 10000 kgWerkstückgewicht in den Setzstöcken max.: 15000 kgGesamtleistungsbedarf: 55 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: 1100 mm
Drehdurchmesser über Support: 710 mm
Drehlänge: 6000 mm
Drehmoment: 35000 Nm
Spitzenhöhe: 550 mm
Lünette: 80-300 mm
Werkstückgewicht: 10000 kg
Werkstückgewicht in den Setzstöcken max.: 15000 kg
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehdurchmesser über Support: 710 mm
Drehlänge: 6000 mm
Drehmoment: 35000 Nm
Spitzenhöhe: 550 mm
Lünette: 80-300 mm
Werkstückgewicht: 10000 kg
Werkstückgewicht in den Setzstöcken max.: 15000 kg
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesCenter lathes and spindle lathes
Drehdurchmesser über Bett: 1740 mmDrehdurchmesser über Support: 1300 mmDrehlänge: 15200 mmDrehzahl: 4-180 U/minLünette: 860Planscheibe: 1500 mmPinolendurchmesser: 220 mmBettbreite: 1025 mmGesamtleistungsbedarf: 37 kWMaschinengewicht ca.: t
Drehdurchmesser über Bett: 1740 mm
Drehdurchmesser über Support: 1300 mm
Drehlänge: 15200 mm
Drehzahl: 4-180 U/min
Lünette: 860
Planscheibe: 1500 mm
Pinolendurchmesser: 220 mm
Bettbreite: 1025 mm
Gesamtleistungsbedarf: 37 kW
Maschinengewicht ca.: t
Drehdurchmesser über Support: 1300 mm
Drehlänge: 15200 mm
Drehzahl: 4-180 U/min
Lünette: 860
Planscheibe: 1500 mm
Pinolendurchmesser: 220 mm
Bettbreite: 1025 mm
Gesamtleistungsbedarf: 37 kW
Maschinengewicht ca.: t