10
Metal working and machine toolsAccessories and spare parts
Luftfördermenge: 2500 m³/hSaugkraft: . kPaAntriebsleistung: 1,1 kW
Luftfördermenge: 2500 m³/h
Saugkraft: . kPa
Antriebsleistung: 1,1 kW
Saugkraft: . kPa
Antriebsleistung: 1,1 kW
1
Metal working and machine toolsAccessories and spare partsOther
Working height: 600 – 1000 mm
Maximal table load: 800 kg
width of rolls: 360 mm
diameter of rolls: 60 mm
number of rolls: 4
Length: 1000 mm
Weight: 40 kg
Working height: 600 – 1000 mm
Maximal table load: 800 kg
width of rolls: 360 mm
diameter of rolls: 60 mm
number of rolls: 4
Length: 1000 mm
Weight: 40 kg
Maximal table load: 800 kg
width of rolls: 360 mm
diameter of rolls: 60 mm
number of rolls: 4
Length: 1000 mm
Weight: 40 kg
1
Metal working and machine toolsAccessories and spare parts
Jaw opening: 125 mm
jaw height: 45 mm
Opening of upper beam: 100 mm
Weight: 29 kg
Jaw opening: 125 mm
jaw height: 45 mm
Opening of upper beam: 100 mm
Weight: 29 kg
jaw height: 45 mm
Opening of upper beam: 100 mm
Weight: 29 kg
1
Metal working and machine toolsAccessories and spare partsOther
Working height: 610 - 920 mm
Maximal table load: 700 kg
width of rolls: 350 mm
diameter of rolls: 52 mm
number of rolls: 1
Weight: 20 kg
Working height: 610 - 920 mm
Maximal table load: 700 kg
width of rolls: 350 mm
diameter of rolls: 52 mm
number of rolls: 1
Weight: 20 kg
Maximal table load: 700 kg
width of rolls: 350 mm
diameter of rolls: 52 mm
number of rolls: 1
Weight: 20 kg
1
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 65 mm
Spindle cone: MK 5
Distance spindle - column: 440 – 1.580 mm
Revs: 40 – 1.920 (12) r.p.m.
Tapping capacity: Steel/Cast: M50/M60
Distance table - spindle underside: 380 – 1.600 mm
automatic feed: 0,07 – 0,96 (6) mm/min
Spindle motor: 5.5 kW
Column diameter: 432 mm
Quill travel: 370 mm
Table: 2.480 x 1.050 x 210 mm
Elvating motor: 1 kW
Box table dimensions: 700 x 500 x 400 mm
max. height: 3170 mm
Length: 2850 mm
Width: 1400 mm
Height: 2940 mm
Weight: 4600 kg
Drilling capacy mild steel: 65 mm
Spindle cone: MK 5
Distance spindle - column: 440 – 1.580 mm
Revs: 40 – 1.920 (12) r.p.m.
Tapping capacity: Steel/Cast: M50/M60
Distance table - spindle underside: 380 – 1.600 mm
automatic feed: 0,07 – 0,96 (6) mm/min
Spindle motor: 5.5 kW
Column diameter: 432 mm
Quill travel: 370 mm
Table: 2.480 x 1.050 x 210 mm
Elvating motor: 1 kW
Box table dimensions: 700 x 500 x 400 mm
max. height: 3170 mm
Length: 2850 mm
Width: 1400 mm
Height: 2940 mm
Weight: 4600 kg
Spindle cone: MK 5
Distance spindle - column: 440 – 1.580 mm
Revs: 40 – 1.920 (12) r.p.m.
Tapping capacity: Steel/Cast: M50/M60
Distance table - spindle underside: 380 – 1.600 mm
automatic feed: 0,07 – 0,96 (6) mm/min
Spindle motor: 5.5 kW
Column diameter: 432 mm
Quill travel: 370 mm
Table: 2.480 x 1.050 x 210 mm
Elvating motor: 1 kW
Box table dimensions: 700 x 500 x 400 mm
max. height: 3170 mm
Length: 2850 mm
Width: 1400 mm
Height: 2940 mm
Weight: 4600 kg
6
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 32 mm
Spindle cone: MK 4
Distance spindle - column: 220 – 950 mm
Revs: 73 – 1.247 (6) r.p.m.
Tapping capacity: Steel: M 25, Cast iron: M 32
Distance table - spindle underside: 350 – 1.210 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 1.5 kW
Column diameter: 210 mm
Quill travel: 220 mm
Table: 1.260 x 640 x 160 mm
Box table dimensions: 600 x 445 x 380 mm
max. height: 2320 mm
Length: 1800 mm
Width: 830 mm
Height: 2190 mm
Weight: 1250 kg
Drilling capacy mild steel: 32 mm
Spindle cone: MK 4
Distance spindle - column: 220 – 950 mm
Revs: 73 – 1.247 (6) r.p.m.
Tapping capacity: Steel: M 25, Cast iron: M 32
Distance table - spindle underside: 350 – 1.210 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 1.5 kW
Column diameter: 210 mm
Quill travel: 220 mm
Table: 1.260 x 640 x 160 mm
Box table dimensions: 600 x 445 x 380 mm
max. height: 2320 mm
Length: 1800 mm
Width: 830 mm
Height: 2190 mm
Weight: 1250 kg
Spindle cone: MK 4
Distance spindle - column: 220 – 950 mm
Revs: 73 – 1.247 (6) r.p.m.
Tapping capacity: Steel: M 25, Cast iron: M 32
Distance table - spindle underside: 350 – 1.210 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 1.5 kW
Column diameter: 210 mm
Quill travel: 220 mm
Table: 1.260 x 640 x 160 mm
Box table dimensions: 600 x 445 x 380 mm
max. height: 2320 mm
Length: 1800 mm
Width: 830 mm
Height: 2190 mm
Weight: 1250 kg
2
Metal working and machine toolsLathes
Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
2
Metal working and machine toolsLathes
Swing over bed: 630 mm
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg
Swing over bed: 630 mm
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg
4
Metal working and machine toolsPressesEccentric presses
pressing capacity: 70 to
Tonnage rating point: 4 mm
Table length: 920 mm
Table width: 500 mm
Hole in table: 180 mm
Stroke: 12 - 120 mm
Strokes: 50 - 80 1/min
Ram guides: 8
Ram adjustment: 80 mm
Throat depth: 260 mm
Distance between columns: 560 mm
Motor: 7 kW
Length: 1225 mm
Width: 1865 mm
Height: 3060 mm
Weight: 7000 kg
pressing capacity: 70 to
Tonnage rating point: 4 mm
Table length: 920 mm
Table width: 500 mm
Hole in table: 180 mm
Stroke: 12 - 120 mm
Strokes: 50 - 80 1/min
Ram guides: 8
Ram adjustment: 80 mm
Throat depth: 260 mm
Distance between columns: 560 mm
Motor: 7 kW
Length: 1225 mm
Width: 1865 mm
Height: 3060 mm
Weight: 7000 kg
Tonnage rating point: 4 mm
Table length: 920 mm
Table width: 500 mm
Hole in table: 180 mm
Stroke: 12 - 120 mm
Strokes: 50 - 80 1/min
Ram guides: 8
Ram adjustment: 80 mm
Throat depth: 260 mm
Distance between columns: 560 mm
Motor: 7 kW
Length: 1225 mm
Width: 1865 mm
Height: 3060 mm
Weight: 7000 kg
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
4
Printing machineryCutting machines
Polar 92 EMC monitor
Chrome table with air
2 x 1m2 resopal side tables with air.
Polar 92 EMC monitor
Chrome table with air
2 x 1m2 resopal side tables with air.
Chrome table with air
2 x 1m2 resopal side tables with air.
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
-6_thumb.jpg "Show advert")
7
Printing machineryCutting machines
Polar 92 EMC monitor.
Snijbreedte: 92 cm
Chrome air table
Complete with tools and spare knife
Polar 92 EMC monitor.
Snijbreedte: 92 cm
Chrome air table
Complete with tools and spare knife
Snijbreedte: 92 cm
Chrome air table
Complete with tools and spare knife
13
Plastic processing machinesInjection molding machinesMulti-component injection molding machines
Ref. no.: 18092
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Ref. no.: 18092
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
11
Metal working and machine toolsMilling machinesOther
X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
10
Plastic processing machinesPresses
Druck: 650 tDurchgangsbreite: 920 mmHub: 1500 mmTischfläche: 2000x1500 mmStößelfläche: 2000x1500 mmEinbauhöhe: 2100 mmHydraulik: 250 barSchließgeschwindigkeit: 500 mm/secPreßgeschwindigkeit: 0,5-10,4 mm/secLoch im Stößel Durchmesser/Tiefe: mmÖffnungsgeschwindigkeit: 250 mm/250Gesamtleistungsbedarf: kWMaschinengewicht ca.: 47 tRaumbedarf ca.: m
Druck: 650 t
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
3
Metal working and machine toolsGear cutting machinesGear milling machines
Raddurchmesser - max.: 2000 mmRadbreite: . mmModul - max.: 22größter Fräserdurchmesser: 250 mmFräserdrehzahlen: 16-92 U/minGesamtleistungsbedarf: 13 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Raddurchmesser - max.: 2000 mm
Radbreite: . mm
Modul - max.: 22
größter Fräserdurchmesser: 250 mm
Fräserdrehzahlen: 16-92 U/min
Gesamtleistungsbedarf: 13 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Radbreite: . mm
Modul - max.: 22
größter Fräserdurchmesser: 250 mm
Fräserdrehzahlen: 16-92 U/min
Gesamtleistungsbedarf: 13 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
8
Commercial vehiclesTrailersLow loader trailer
Anzahl Achsen: 2 St.Länge: 7,7 mGesamtgewicht: 20 tAchslast vorne: 10 tAchslast hinten: 10 tBreite: 2,5 m
Anzahl Achsen: 2 St.
Länge: 7,7 m
Gesamtgewicht: 20 t
Achslast vorne: 10 t
Achslast hinten: 10 t
Breite: 2,5 m
Länge: 7,7 m
Gesamtgewicht: 20 t
Achslast vorne: 10 t
Achslast hinten: 10 t
Breite: 2,5 m
10
Metal working and machine toolsPressesFour column presses
Druck: 650 tDurchgangsbreite: 920 mmHub: 1750 mmTischfläche: 2000x1500 mmStößelfläche: 2000x1500 mmEinbauhöhe: 2100 mmHydraulik: 203 barSchließgeschwindigkeit: 500 mm/secPreßgeschwindigkeit: 0,5-10,4 mm/secLoch im Stößel Durchmesser/Tiefe: mmÖffnungsgeschwindigkeit: 250 mm/250Rückzugskraft: 150 tGesamtleistungsbedarf: 75 kWMaschinengewicht ca.: 47 tRaumbedarf ca.: 4,4x2,5x7,5 m
Druck: 650 t
Durchgangsbreite: 920 mm
Hub: 1750 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 203 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Rückzugskraft: 150 t
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: 4,4x2,5x7,5 m
Durchgangsbreite: 920 mm
Hub: 1750 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 203 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Rückzugskraft: 150 t
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: 4,4x2,5x7,5 m
9
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Rohrdurchmesser: 45 mmWandstärke: 2 mmBiegeradius min.: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 1,7 tRaumbedarf ca.: 5x0,85x1,5 m
Rohrdurchmesser: 45 mm
Wandstärke: 2 mm
Biegeradius min.: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 1,7 t
Raumbedarf ca.: 5x0,85x1,5 m
Wandstärke: 2 mm
Biegeradius min.: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 1,7 t
Raumbedarf ca.: 5x0,85x1,5 m
9
Conveyor technologyCranes
Tragkraft: 2 tHub: 4000 mmSpannweite: 9200 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Tragkraft: 2 t
Hub: 4000 mm
Spannweite: 9200 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Hub: 4000 mm
Spannweite: 9200 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
11
Metal working and machine toolsMilling machinesUniversal milling machines
x-Weg: 1600 mmy-Weg: 920 mmz-Weg: 900 mmTischfläche: 1800x700 mmT-Nuten - Abstand: 120 mmTischbelastung: 3000 kgSpindelaufnahme ISO: 50Antriebsleistung: 22/30 kWSpindeldrehzahlen: 60-3000 U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 1600 mm
y-Weg: 920 mm
z-Weg: 900 mm
Tischfläche: 1800x700 mm
T-Nuten - Abstand: 120 mm
Tischbelastung: 3000 kg
Spindelaufnahme ISO: 50
Antriebsleistung: 22/30 kW
Spindeldrehzahlen: 60-3000 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 920 mm
z-Weg: 900 mm
Tischfläche: 1800x700 mm
T-Nuten - Abstand: 120 mm
Tischbelastung: 3000 kg
Spindelaufnahme ISO: 50
Antriebsleistung: 22/30 kW
Spindeldrehzahlen: 60-3000 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
2
Metal working and machine toolsMilling machinesOther
x-Weg: 600 mmy-Weg: 500 mmz-Weg: 400 mmSteuerung: 432Spindelaufnahme ISO: 40Drehzahl: 20-6000 U/minWerkzeugwechsler: 24Gesamtleistungsbedarf: 35 kWMaschinengewicht ca.: 5,2 tRaumbedarf ca.: 3,6x3x2,925 m
x-Weg: 600 mm
y-Weg: 500 mm
z-Weg: 400 mm
Steuerung: 432
Spindelaufnahme ISO: 40
Drehzahl: 20-6000 U/min
Werkzeugwechsler: 24
Gesamtleistungsbedarf: 35 kW
Maschinengewicht ca.: 5,2 t
Raumbedarf ca.: 3,6x3x2,925 m
y-Weg: 500 mm
z-Weg: 400 mm
Steuerung: 432
Spindelaufnahme ISO: 40
Drehzahl: 20-6000 U/min
Werkzeugwechsler: 24
Gesamtleistungsbedarf: 35 kW
Maschinengewicht ca.: 5,2 t
Raumbedarf ca.: 3,6x3x2,925 m
11
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 200 mmx-Weg: 12000 mmy-Weg: 4150 mmz-Weg: 1600 mmw-Achse: 2000 mmSteuerung: SiemensTyp: 840 D PowerlineDrehzahl: 920 U/minTraghülsenabmessung: 540x560 mmKühlmitteleinrichtung: 1500 lGesamtleistungsbedarf: 80 kWMaschinengewicht ca.: 130 tRaumbedarf ca.: 19x5x11,75 m
Spindeldurchmesser: 200 mm
x-Weg: 12000 mm
y-Weg: 4150 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D Powerline
Drehzahl: 920 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1500 l
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 19x5x11,75 m
x-Weg: 12000 mm
y-Weg: 4150 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D Powerline
Drehzahl: 920 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1500 l
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 19x5x11,75 m
3
Metal working and machine toolsLathesHeavy-duty lathes
Drehdurchmesser über Bett: 920 mmDrehdurchmesser über Support: 720 mmDrehlänge: 4000 mmDrehzahl: 1,4-280 U/minDigitalanzeige: AcuriteLünette: 500Planscheibe: 900 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: 920 mm
Drehdurchmesser über Support: 720 mm
Drehlänge: 4000 mm
Drehzahl: 1,4-280 U/min
Digitalanzeige: Acurite
Lünette: 500
Planscheibe: 900 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehdurchmesser über Support: 720 mm
Drehlänge: 4000 mm
Drehzahl: 1,4-280 U/min
Digitalanzeige: Acurite
Lünette: 500
Planscheibe: 900 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
7
Metal working and machine toolsAccessories and spare partsOther
Recording: Sk 50
Weight: . kg
Materials: .
Recording: Sk 50
Weight: . kg
Materials: .
Weight: . kg
Materials: .
5
Food machinesContainers, shelves and tanks
Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
7
Food machinesContainers, shelves and tanks
Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
6
Food machinesContainers, shelves and tanks
Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
5
Food machinesContainers, shelves and tanks
Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
6
Food machinesOther
2020, Stainless three deck oven, HMI touch screen controls for all decks, 15.6Kw, chamber sizes 900mm L x 750mm W x 200mm H, mobile, 3Ph
2020, Stainless three deck oven, HMI touch screen controls for all decks, 15.6Kw, chamber sizes 900mm L x 750mm W x 200mm H, mobile, 3Ph
4
Food machinesOther
Stainless frame, elevates from 600mm to 1600mm, side guides, belt width 300mm, mobile, 3Ph
Stainless frame, elevates from 600mm to 1600mm, side guides, belt width 300mm, mobile, 3Ph
11
Food machinesAccessories and spare parts
Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph
Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph
7
Food machinesOther
Stainless screw elevator conveyor, screw diameter 100mm, elevates from 500mm to 1400mm, 1.5Kw motor, 3Ph
Stainless screw elevator conveyor, screw diameter 100mm, elevates from 500mm to 1400mm, 1.5Kw motor, 3Ph
6
Food machinesBakery-, pastry equipmentCutting machines
Stainless steel spray glazer, twin jets mounted on frame,heated 100L tank, adjustable temp control, mobile, 3Ph
Stainless steel spray glazer, twin jets mounted on frame,heated 100L tank, adjustable temp control, mobile, 3Ph
7
Food machinesOther
Bakermat 10, 2013 stainless oven with stainless cooling rack, six tray spaces, water pressure 1.5-5 bar
Bakermat 10, 2013 stainless oven with stainless cooling rack, six tray spaces, water pressure 1.5-5 bar
7
Food machinesOther
Lot 492 NNP Flighted elevator conveyor Stainless flighted conveyor with top mounted outfeed chute, 3700mm x 380mm. See video at: https://www.youtube.com/watch?v=Axhq2ujNGvc
Lot 492 NNP Flighted elevator conveyor Stainless flighted conveyor with top mounted outfeed chute, 3700mm x 380mm. See video at: https://www.youtube.com/watch?v=Axhq2ujNGvc
1
Conveyor technologyOther
7
Printing machineryCutting machines
Wohlenberg 92 MCS-TV
Cutting size: 92 cm
Complete with knife change tools
Spare knife
Main and side tables with air
Monitor and machine in good condition
Wohlenberg 92 MCS-TV
Cutting size: 92 cm
Complete with knife change tools
Spare knife
Main and side tables with air
Monitor and machine in good condition
Cutting size: 92 cm
Complete with knife change tools
Spare knife
Main and side tables with air
Monitor and machine in good condition
6
Printing machineryCutting machines
Wohlenberg 92 MCS 2 - TV
Airtable: Yes
Wohlenberg 92 MCS 2 - TV
Airtable: Yes
Airtable: Yes
6
Printing machineryCutting machines
Wohlenberg 92 MCS 2 TV
Size: 92 cm
Air table
Wohlenberg 92 MCS 2 TV
Size: 92 cm
Air table
Size: 92 cm
Air table
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
-6_thumb.jpg "Show advert")
-7_thumb.jpg "Show advert")
-8_thumb.jpg "Show advert")
-9_thumb.jpg "Show advert")
10
Printing machineryCutting machines
Polar 92 Em monitor
Year: 1992
Orignal LCD monitor
Chorme table with air
knife change tools
Spare knife
Polar 92 Em monitor
Year: 1992
Orignal LCD monitor
Chorme table with air
knife change tools
Spare knife
Year: 1992
Orignal LCD monitor
Chorme table with air
knife change tools
Spare knife
-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
-6_thumb.jpg "Show advert")
-7_thumb.jpg "Show advert")
-8_thumb.jpg "Show advert")
8
Packaging machineryFilm shrinking machines
Minipack Torre RP 55
MANUAL HEAT-SHRINK - SEALING BAR 540X390 MM
Available dimensions of the sealing bars: 540x390 mm
MAX product size: 500x380x200 mm
Maximum reel dimensions: (Ø x length) Ø250x600 mm
Work Surface Height: 925 mm
Machine dimensions: (open hood) 1260x810x1310 mm
Machine dimensions: (closed hood) 1260x810x1165 mm
Weight: 126 kg
Minipack Torre RP 55
MANUAL HEAT-SHRINK - SEALING BAR 540X390 MM
Available dimensions of the sealing bars: 540x390 mm
MAX product size: 500x380x200 mm
Maximum reel dimensions: (Ø x length) Ø250x600 mm
Work Surface Height: 925 mm
Machine dimensions: (open hood) 1260x810x1310 mm
Machine dimensions: (closed hood) 1260x810x1165 mm
Weight: 126 kg
MANUAL HEAT-SHRINK - SEALING BAR 540X390 MM
Available dimensions of the sealing bars: 540x390 mm
MAX product size: 500x380x200 mm
Maximum reel dimensions: (Ø x length) Ø250x600 mm
Work Surface Height: 925 mm
Machine dimensions: (open hood) 1260x810x1310 mm
Machine dimensions: (closed hood) 1260x810x1165 mm
Weight: 126 kg
5
Compressed-air technologyContainers
Grassair compressed air tank/ receiver
Year: 1996
Max pressure:11 bar
Volume: 500 Liter
Grassair compressed air tank/ receiver
Year: 1996
Max pressure:11 bar
Volume: 500 Liter
Year: 1996
Max pressure:11 bar
Volume: 500 Liter
7
Printing machineryCutting machines
Foll Feida 92 cm cutter
Chrome air table
Complete with tools and spare knife
Foll Feida 92 cm cutter
Chrome air table
Complete with tools and spare knife
Chrome air table
Complete with tools and spare knife