Syspal 508/023144 Vibratory conveyor, Serial: K80201-1, 2019, Stainless, conveyor dimensions 1500mm x 270mm, adjustable vibration control, mobile, 1P508h

Rotolok 20BSS Rotary valve, Rotary valve, with spare stainless roto shaft

Elmo Rietschle VC300 Vacuum pump, 3x Elmo Rietschle oil lubricated rotary vane pumps, 5.5Kw, 300 M3/H flow rate

Bending length: 2050 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending - mild steel: 10 mm
Max. plate thickness with prebending - mild steel: 8 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 200 mm
Lower roll diameter: 200 mm
Lateral roll diameter: 180 mm
Bending speed: 6 m/min
Length: 3850 mm
Width: 1350 mm
Height: 1290 mm
Weight: 3750 kg

Bending length: 2050 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending - mild steel: 8 mm
Max. plate thickness with prebending - mild steel: 6 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Upper roll diameter: 180 mm
Lower roll diameter: 180 mm
Lateral roll diameter: 150 mm
Bending speed: 5 m/min
Length: 3850 mm
Width: 1350 mm
Height: 1290 mm
Weight: 3300 kg

Bending length: 1270 mm
Max. bending capacity - mild steel: 5
Max. plate thickness without prebending - mild steel: 5 mm
Max. plate thickness with prebending - mild steel: 4 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Length: 3020 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2150 kg

Max. Blechstärke - Baustahl: 3.5 mm
Ausladung: 750 mm
Motor: 2 kW
Geschwindigkeit: 6 m/min
Rondendurchmesser min/max: 200/1200 mm
Länge: 2000 mm
Breite: 600 mm
Höhe: 1400 mm
Gewicht: 750 kg

Max. sheet thickness - mild steel: 5 mm
Max. blank diameter: 2000 mm
Min. blank diameter: 250 mm
Motor: 2,2+0,75 kW
Length: 3000 mm
Width: 750 mm
Height: 1400 mm
Weight: 1350 kg

Sheet Thickness - mild steel: 0.4 - 2 mm
Max. sheet width: 400 mm
Max. cross-section: 300 mm
Feed roll diameter: 63 mm
Feeding speed: 150 m/min
Feeding acceleration: 10 m/s²

Sheet Thickness - mild steel: 0.4 - 2 mm
Max. sheet width: 300 mm
Max. cross-section: 300 mm
Feed roll diameter: 63 mm
Feeding speed: 150 m/min
Feeding acceleration: 10 m/s²

Sheet Thickness - mild steel: 0.4 - 2 mm
Max. sheet width: 200 mm
Max. cross-section: 300 mm
Feed roll diameter: 63 mm
Feeding speed: 150 m/min
Feeding acceleration: 10 m/s²

WEILER COMMODOR 230 / Heidenhain Digitalanzeige
Maschine stammt aus einem Ausbildungsbetrieb

-CS-Kennung
-Spitzenhöhe 230mm
-Spitzenweite 1000mm
-Drehdurchmesser über Bett 475mm
-Umlaufdurchmesser über Planschieber 270mm
-Stangendurchlass 56mm
-Drehzahlbereich 25-2000 U/min
-Automatische Längs / Planvorschübe
-Gewinde / Metrisch / Zoll /usw.
-Reitstock MK4
-Dreibackenfutter 200mm
-Schnellwechselhalter mit Einsätzen
-Kühlmitteleinrichtung
-Futterschutz
-Spänerückwand
-Arbeitsleuchte
- Not/Aus
-Maschinenfüße
-Dokumentation


Abmaße:
LxBxH 2,5x1,5x1,7 Meter / Gewicht 1800Kg

Hagen & Göbel HG22EB Gewindebohrmaschine

-Typ HG22EB
-Marke Hagen & Göbel
-Drehzahlbereich 180-1120 U/min
-Tischabmessungen ca. 600x500mm

Abmaße:
LxBxH 1,1x0,7x2,0 Meter / Gewicht 1000Kg

Hagen & Göbel HC22E Gewindebohrmaschine

-Produktart HC22E
-Marke Hagen & Göbel
-Drehzahlbereich 56-355 U/min
-Tischabmessungen ca. 600x500mm
-Baujahr 1988

Abmaße:
LxBxH 1,1x0,7x2,0 Meter / Gewicht 1000Kg

Leit + Zugspindeldrehmaschine WEILER DA 260x1000

-Digitalanzeige - Drei Achsen " NEU"
-Spitzenhöhe 260mm
-Drehdurchmesser über Bett 535mm
-Drehdurchmesser über Planschieber 345mm
-Spitzenweite 1000mm
-Spindelbohrung 71mm
-Drehzahlbereich 33 - 1500 U/min
-12 x Spindeldrehzahlen über Getriebe
-Automatische Längs / Planvorschübe
-Gewindeschneiden / Metrisch / Zoll / Diametral
-Reitstock MK 4
-NEUE DREI-ACHSDIGITALANZEIGE
-Antriebsleistung 7,5 KW
-Planspindelmutter "NEU"
-Multifixgrundhalter mit Einsatz
-Dreibackenfutter 350mm
-2 x Not - Aus
- elektrischer Futterschutz "NEU"
-Spänerückwand
-Kühlmitteleinrichtung
-Bohrfutter
-Dokumentation


Abmaße:
LxBxH 2,7x1,5 x1,7 Meter / Gewicht 1700Kg

NNP elevator screw conveyor, 100Kg stainless hopper with mesh guard, 100mm screw diameter, elevated from 300mm to 2300mm, mobile, 3Ph

Sheet Thickness - mild steel: 0.4 - 2 mm
Max. sheet width: 100 mm
Max. cross-section: 200 mm
Feed roll diameter: 63 mm
Feeding speed: 150 m/min
Feeding acceleration: 10 m/s²

Ref. no.: 17505
Hersteller: DEMAG
Year of construction: 1997

Clamping unit
Clamping force: 35 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 180 mm
Platen size (h x v): 460 x 450 mm

Injection unit
Screw diameter: 18 mm
Injection volume: 23 cm³
Shot weight: 20 g
Injection pressure: 2868 bar

Measurements and weight
Dimensions: 3,3 x 1,2 x 2,0 m
Machine weight: 2700 kg

Selo SSB2000 Steamed cake donut line. 2022, The SSB 2000 is designed for a continuous production of Steamed Cake donuts starting from the infeed of trays in a steam tunnel with continuous transport by conveyor belts. At the start of the SSB 2000, the baking trays are greased and filled with the dough and positioned on the conveyor belt which is taking over the filled baking trays for the transfer to the steam tunnel. The donut dough is steamed in a different time range, depending on recipe and product size. After the steaming process, the trays with the ready Steamed Cake Donuts are automatically depanned and transported, while in the meantime the trays are re-filled and circulated without washing. The maximum capacity of the SSB 2000 is approximately 20.000 Steamed Cake donuts per hour. The maximum capacity of steamed mini cake donuts will be approximately 45.000 per hour. Never been used in production. With manuals / drawings / technical spec.

Renz wbs 360 Wiro closing machine.
Manual operation

Manual wire closing machine for wire binding. For closing of RENZ RING WIRE® wire comb elements from ø 3/16" - 1 1/2" (5,5 - 38 mm), interdependent of pitch, working width 360 mm. Connected to the desk top punch DTP 340 M, the WBS module becomes a powerful and space-saving punching and binding system.
usable as stand-alone unit, this requires the module holding device
for closing all diameters from 5,5 - 38 mm (3/16" - 1 1/2"), independent of pitch
due to its lateral open construction, the WBS is also usable for double closings (2 x 360 mm)
easy connection to the desk top punch DTP 340 M
quality "Made in Germany"

Renz DTP 340 A
Wiropunching machine
Complete with 2 tools for round holes

Länge des Hebels 1,5 m, Rollenbreite unten knapp 20 cm, stabile Ausführung, > 3 t

Adam GFK75 platform scale, 75Kg max, 0.005Kg min

Medway 150 sack stitcher, Serial: 2578

Wrights Dowson Multidirectional screw feed, Serial: 225493, Stainless, Two way screw feed, 3700mm length per screw, twin 2.2Ke drives, diameter screw 300mm

Gericke GS4722 Inline centrifugal sifter, Serial: M30994, 2022, Stainless, inline centrifugal sifter, rating - SIRA 06 Atex,

UWE AFS60 platform scale, Serial: AFSA1500, 60kg max, 400g minimum, at 20g intervals

Gericke CSM722 MK2 Inline centrifugal rotary sifter, Serial: CM27169, 1999, Stainless, Inline centrifugal rotary sifter

Siat Pallet wrapper, Serial: 14365, 2002, turntable pallet wrapper, 1650mm diameter turntable, variable speed and tension controls, 3Ph

Fidelity FM16S platform scale, Serial: 277FM16S020, 0Kg to 60Kg, 10g intervals

Ohaus T31XW platform scale, Serial: 0018225-6KK, 0.4Kg to 60Kg, 10g intervals, 1Ph

UWE AFS150 platform scale, Serial: AFS-B1904, 1Kg to 150Kgs max, 50g intervals

pressing capacity: 20 to
Tonnage rating point: 1.7 mm
Table length: 360 mm
Table width: 550 mm
Hole in table: 140 mm
Stroke: 1 - 50 mm
Strokes: 160 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 35 mm
Throat depth: 200 mm
Daylight: 240 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1860 mm
Weight: 1250 kg

pressing capacity: 10 to
Tonnage rating point: 1.4 mm
Table length: 270 mm
Table width: 370 mm
Hole in table: 100 mm
Stroke: 1 - 40 mm
Strokes: 200 1/min
Ram guides: 4
Ram adjustment: 35 mm
Ram hole: 25 mm
Throat depth: 160 mm
Daylight: 180 mm
Motor: 0.75 kW
Length: 1170 mm
Width: 1180 mm
Height: 1700 mm
Weight: 590 kg

Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg

Arbeitsbreite: 6 m
Walzendurchmesser: 65 cm
Scheibendurchmesser: 42 cm

Arbeitsbreite: 3 m
Reihenzahl: 4 0
Reihenabstand: 75 cm
Gewicht: 780 kg

Druck: 200 t
Tischlänge: 2500 mm
Tischbreite: 1800 mm
Tischweg: 2700 mm
Einbauhöhe: 2250 mm
obere Aufspannfläche:: 1800x2500
Ständergrundfläche: 1900 mm
Gesamtleistungsbedarf: 22 KW
Maschinengewicht ca.: 30 t
Raumbedarf ca.: . m

Bending length: 1050 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg

pressing capacity: 60 to
Bending length: 2550 mm
Axes: Y1 / Y2 and X-axis
Stroke: 160 mm
Inside distance between side frames: 2150 mm
Gap in side frame: 250 mm
Daylight: 350 mm
Power concept: hydraulic
rapid speed Y-axis: 120 mm/s
Working speed Y-axis: 9
Retractionspeed Y-axis: 70
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 813 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 5.5 kW
Length: 3250 mm
Width: 1200 mm
Height: 2350 mm
Weight: 4250 kg

JKV Hermes JKV100 chocolate tempering machine, Serial: 15070597, 2015, Stainless, chocolate tempering moulding machine with vibratory table, adjustable temperature controls, mobile, 3Ph

Reiser Vemag, Sheeting head, Serial: RUKSUP078, Reiser Vemag dough portioning sheeting attachment, mounted on stainless C frame, mobile

Dodmores Vibratory conveyor, Vibratory conveyor, bed dimensions 1800mm x 340mm, with top mounted product sensor, 3Ph

Außenmaße 7,46 x 3,4 m, Die Räume bestehen aus Container für Umkleide, Container in der Mitte ist der Technik-Container mit Verteilung Strom, Durchlauferhitzer, Alle Wasseranschlüsse, Abwasser Bad, Spüle Teeküche, Der Raum mit der Teeküche besteht aus Boden und Decke, Wand vorne und hinten, sowie Wand rechts. Boden und Decke sind geteilt, so daß die auf 2,4 m LKW gefahren werden können. Alles Fertigbauweise, so daß die Räume an einem Tag wieder aufgebaut werden können.

Linde Cryoflex CTFA4-60 Cryogenic Freezer, Serial 3002097/2, 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Greaves VHSD10 High shear disperser, Serial: M39998, 2019, stainless, high shear disperser with electro hydraulic lift, 7.5Kw, variable speed from 200-1000rpm, timer controls, ideal for mixing into tote bins, 3Ph

Risco RS1040 MAS Vacuum stuffer, Serial: A003004, Stainless, 50L agitated hopper, variable speed, portions from 5 to 10000g, 2.3KW, with manual, 3Ph

Adexa ADM40 Planetary mixer, Serial: 20230830125, Stainless 40L bowl, three speeds, whisk beater and dough hook attachment, mesh safety guard, 1Ph

Blade length: 197 mm
Sheet thickness (420 N/mm²): 4 mm
Sheet thickness (600 N/mm²): 2 mm
Strokes: 20 1/min
Angle: 90 °
Motor: 4 kW
Length: 890 mm
Width: 780 mm
Height: 1115 mm
Weight: 550 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2430 mm
Weight: 1500 kg