Swing over bed: 1320 mm
Distance between centers: 3000 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 5 - 1000
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: Array
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8550 kg

Swing over bed: 1090 mm
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg

Swing over bed: 1090 mm
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg

Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg

Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg

Swing over bed: 630 mm
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg

Swing over bed: 325 mm
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg

Bending length: 8020 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1000 mm

Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1000 mm

Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm

Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm

Bending length: 5010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm

Kernbohrdurchmesser - max.: 50-355 mm
Bohrtiefe: 4000 mm
Umlaufdurchmesser: 1000 mm
Spitzenhöhe: 500 mm
Vollbohren: 18-100 mm
Hauptspindelbohrung: 163 mm
Drehzahl: 56-710 U/min
Werkstückgewicht: 6,3/10 t
Setzstock: 70-600 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: 520 mm
y-Weg: 400 mm
z-Weg: 450 mm
Spindelaufnahme ISO: 40
Steuerung: TNC 360
Kühlmittelbehälter: l
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 2450x2300x3300 m

Turning diameter over bed: 1000 mm
Turning diameter over support: 760 mm
Turning length: 5000mm
Spindle Bore: 82mm
Speed: 3.55-710 rpm
Faceplate: 1000mm
Three-jaw chuck: 500 mm
Bezel: 2
Total power requirement: 22 kW
Machine weight approx.: 10 t
Space requirement approx.: 8x2x1.8 m

Drehdurchmesser: 570 mm
Drehlänge: 2000 mm
Steuerung: Siemens Sinumeric
Drehdurchmesser in der Kröpfung: 600 mm
Drehdurchmesser über Support: 340 mm
Spindelbohrung: 63 mm
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: 4,5 t
Raumbedarf ca.: 3,5x1,5x1,5 m

Stainless, ideal for sealing sandwich wedges of all sizes into plastic trays, up to 60 products per min, variable speed, adjustable temp controls, currently set for 165mm x 66mm skillet, 2200mm overall length, mobile, 1Ph

Intact Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph

Intact Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph

Stainless steel spray glazer, twin jets mounted on frame,heated 100L tank, adjustable temp control, mobile, 3Ph

stainless heavy duty bag sealer, 650mm sealing bar, adjustable weld & cooling temp,

500L hot water jacketed mixing vessel, side bottom discharge, variable speed agitator, adjustable temp control

stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control

100L stainless hopper, adjustable fill size on mobile stainless frame

2009 stainless depositor, 25L hopper, adjustable weight control, variable speed

Europack Compact RTSW automatic sleeve wrapper 07-10993 2007, automatic sleeve wrapper, powered belt infeed, variable belt speed, adjustable tunnel & sealing temperature, teflon coated sealing jaw, aperture 350mm x 200mm, 3Ph

Lot 430 Apple Engineering Four head pneumatic depositor Model: MD65 Serial: MC13611 four head depositor, individual controlled heads, on mobile height adjustable frame See video at: https://www.youtube.com/watch?v=YgQUNNmY13c

Stainless mobile height adjustable single head pneumatic depositor with variable speed scroll feeder in hopper for positive product feeding

Mobile height adjustable frame,

Digital readout for easy reading of the set speed or spindle stroke
Smooth running through cast steel pulleysQuality ball bearings ensure high accuracy
<div>Oversized drilling table with T-grooves and coolant chutes
<div>Drilling table swivels (45o), height adjustment via rack</div>
<div>Powerful aluminum motor according to IP54</div>
<div>Accurate keyless chuck supplied as standard</div>
<div>Standard with T-grooves in the ground bottom plate</div>
<div>Ergonomic handles for comfortable working</div>
<div>Keyless chuck 1 - 16 mm /B 18</div>
<div>Drill chuck pin MK 2 / B 18</div>
<div>Right and left rotation switch</div>
<div>Digital drilling depth readout</div>
<div>Digital speed readout</div>
<div>Cross line laser device</div>
<div>Height-adjustable protective cover</div>

Heidelberg KSBA cilinder

Max size: 46x 58.5 cm
Die cutting cilinder with inking unit

Heidelberg PM 52-2

Year 2006
Baldwin dampening
Rubberdoek wasinrichting
Semi automatic plate change
Impressions: ± 20mil

Heidelberg Sm 52 Platepunch
Year: 2000

Heidelberg A4 Tiegel