Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good


Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest

Total power: 6,5 - 12 kW
Weight of machine: 160 kg
Space requirement (W x D x H): 0,9 x 0,8 x 1,1 m
Condition: good working condition

arm 350 mm, with cooling, welding time adjustable, U = 1,2 - 2,2, Fr. 50, input one phase 220 V, I = 29 A

Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m

semi-automatic operation, robust machine, good condition, ready to use

Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good

semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply

Accessory: 18 saw blades, roller conveyor 2 m

Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good

maintained vibration meter

X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation

under power, ready for inspection

Accessory: docmentation

Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m

Separate control device for the chuck clamping

Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m

well-maintained machine ready for immediate use

Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25

Weight of machine: 170 kg

Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm

Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m

Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm

Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good

fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation

Accessory: 2 saw blades

Suction tube: diameter 150 mm

2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension

Power: 2.000
Generator type: Newage Stamford HC.74H
Motor type: Mitsubishi S16-R-PTA2
Voltage: 50 Hz - 400 V
Tank capacity: no fuel tank ltr
Container (W x D x H): 4,8 x 1,7 x 2,5
Working hour: 549 h
Weight of machine: 13.000 kg
Condition: very good

without exhaust system, without starter battery

Swing diameter over bed: 490 mm
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h

without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027

Accessory: Documentation, suction, no other accessories

Power: 1.250 / 1.000
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good

Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).

Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good

for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new

Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good

well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37

Accessory: documentation

Total power: 1,4 kW
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m

for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar

Accessory: without extraction function

Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good

well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37

Accessory: documentation

Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good

well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37

Accessory: documentation

X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect

Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1

Accessory: cooling unit

Power: 2.071 / 1.641
Generator type: Stamford PI734F1
Motor type: Mitsubishi
Voltage: 50 Hz - 400 V
Battery voltage: 24
Tank capacity: 2.000 ltr
Container (W x D x H): 12,3 x 2,45 x 3,2
Working hour: 181 h
Weight of machine: 23.000 kg
Condition: very good

Power: 1130 / 904
Motor type: MTU V18 Bi Turbo Diesel
Speed: 1500 rpm
Voltage: 50 Hz - 230 / 400 V
Tank capacity: 800 ltr
Working hour: 116 h
Condition: very good

Documentation, heat exchanger, batteries, soundproof hood

V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW

Power: 3300 / 3000
Generator type: C175-16 SCAC, V16
Motor type: C175-16 SCAC, V16
Speed: 1.500 rpm
Voltage: 50 Hz - 400 / 230 V
Control: EMCP 4.2B
Battery voltage: 24
Container (W x D x H): 7,9 x 2,8 x 3,3
Working hour: 373 h
Weight of machine: 23000 kg
Condition: very good

Turning diameter: 250 mm
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good

Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used

Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm

Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good

Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m

Accessory: no further accessories

Product witdh: 45 - 400 mm
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m

System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film

Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good

very nice, well-kept machine, hardly any operating hours, with piece counter

Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good

very nice, well-kept machine, hardly any operating hours, with piece counter

Solar module Maysun Solar, MSE-07 370 Wp - full black, mono PU module, 1755 mm x 1038 mm x 30 mm, length of connection cable 110 cm, collection only

Power: 2000 / 1600
Generator type: Leroy Somer LSA 52.3 S5
Motor type: Perkins 4012-46TAG3A
Speed: 1.500 rpm
Voltage: 50 Hz - 230 7 400 V
Control: DSE 8610
Battery voltage: 24
Tank capacity: 2000 ltr
Container (W x D x H): 5,0 x 2,2 x 2,55
Working hour: 0 h
Weight of machine: 11,160 kg
Condition: new

With continuous operation, the performance is reduced by 10%

X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good

less operating hours, can be inspected under power

Accessory: complete documentation

X: 500 mm
Y: 295 mm
Z: 385 mm
C axis: 360 °
Mounting table: 780 x 500 mm
Distance table to quill: 285 - 660 mm
Workpiece weight: 1200 kg
Max. Travel speed X,Y,Z: 600 mm/min
Clamping system: EROWA
C-axis measurement resolution: 0,001 °
Electrode changer: 16 -station
Elektrode changer: Pick-Up
Electrode weight: C-axis 20 kg
Max. single electrode weight: 5 kg
Electrode changer total load: 40 kg
Dielectric cooler: yes
Dielectric filter candles: 3 pcs.
Dielectric filling level: 345 mm
Dielectric fill quantity: 450 l ltr
Dielectric aggregate: separately
Generator: 30 A
Control: EROCOM 200
Fire-extinguishing systems: yes
Total power: 8 kW
Weight of machine: 4400 kg
Space requirement (W x D x H): 2,2 x 3,3 x 2,4 m
Condition: very good

checked by Maho technicians, ready for demonstration under power, instruction / training optionally possible

Accessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500

X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m

Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift

Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario

Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m

with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source

Mounting table: 300 x 400 mm
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good

High-performance drilling machine, machine number 511

Accessory: documentation, coolant equipment

X: 650 mm
Y: 510 mm
Z: 510 mm
Mounting table: 800 x 450 mm
T-tongues: size/quantity/distance
Table load: max. 400 kg
Working height: 760 mm
Spindle diameter: 65 mm
Speed range: 8000 rpm
Spindle power: 7/9,25 kW
Tool holder: SK 40
Tool changer: 16 -station
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Rapid: 16000 m/min
Control: Siemens 802D
Weight of machine: 3500 kg
Space requirement (W x D x H): 2,15 x 2,1 x 2,45 m
Condition: working condition
Working hour: 9325 h


Accessory: Documentation, no futher accessories

Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h

well-kept robot, usable immediately

Accessory: Documentation, all cables

X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good

tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians

Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation

X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good

filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises

Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit

Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm

neat machine, without roller conveyors

Accessory: 2 saw blades, documentation

Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good

mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use

Serial: 13007 Case taper, top and bottom tape heads, side grip belts, max box width 450mm, max box height 500mm, 3Ph

Druck: 100 t
Hubzahl: 30-70 Hub/min
Stößelhub - max: 130 mm
Stößelverstellung: 100 mm
Tischfläche: 950x630 mm
Stößelfläche: 630x600 mm
Ausladung: 340 mm
Einbauhöhe: 480 mm
Haspel: GSW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8,9 t
Raumbedarf ca.: m

Tragkraft: 12 t
Werkstückbreite: 880 mm
Gesamtleistungsbedarf: 130 kW
Maschinengewicht ca.: 63,3 t

Werkstücklänge: 5000 mm
Schwingdurchmesser: 1100 mm
Einspannlänge: 6000 mm
Schleifdurchmesser: 1100 mm
Schleifscheibendurchmesser: 1300 mm
Werkstückgewicht: 2500 kg
Hauptantriebsmotor: 22 kW
Kurbelwellenlagerdurchmesser: 275 mm
Lünette: 100-250 mm
Werkzeug-Drehzahlen: 400/500 U/min
Werkstückdrehzahlen: 20-40 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 30 t
Raumbedarf ca.: m

Werkstücklänge: 2700 mm
Schwingdurchmesser: 630 mm
Einspannlänge: 2700 mm
Hublageverstellung: 40-130 mm
Schleifscheibendurchmesser: 1000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 18,5 t
Raumbedarf ca.: 9x4 m

Sägeblattdurchmesser: 450 mm
Schnittdurchmesser: 150 mm
Hub: 1300 mm
Schnittbereich: 140x140 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Materialbreite: 1200 mm
Coilgewicht: 10 t
Materialstärke: 8 mm
Innendurchmesser: 500 mm
Coilaußen - Durchmesser: 1300 mm
Haspel: Schleicher
Richtapparat: Schleicher
Vorschubantrieb: Schleicher
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m